Engineering Jobs in Rockbridge Baths Virginia

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Overview

We are partnering with a well-established, technology-driven manufacturing organization to identify an Continuous Improvement Engineer with a strong continuous improvement mindset. This role focuses on driving operational excellence across manufacturing processes using lean principles, data-driven analysis, and hands-on leadership on the shop floor.

The ideal candidate is passionate about safety, waste reduction, and sustainable improvement—and is comfortable rolling up their sleeves to support projects across shifts when needed.

What You’ll Be Doing

• Lead and facilitate continuous improvement initiatives using Lean methodologies (Kaizen, 5S, SMED, VSM, TPM, waste reduction)
• Conduct time studies, capacity analysis, value stream mapping, cycle time analysis, and line balancing to improve throughput
• Support and sustain Daily Management Systems, including Tier board development, coaching, and upkeep
• Design and implement ergonomic material handling solutions, optimized layouts, and efficient workstations
• Collect and analyze shop-floor data; translate findings into actionable improvement plans
• Develop and maintain standard work, SOPs, visual controls, and CI documentation
• Monitor and improve KPIs such as OEE, lead time, changeover time, inventory, and safety metrics
• Perform root cause analysis and lead corrective actions using data-driven approaches
• Partner cross-functionally with operations, maintenance, quality, and engineering teams
• Champion a Lean culture through mentoring, coaching, training sessions, and audits
• Propose and support capital investments tied to CI, automation, and technology improvements
• Maintain a strong focus on safety, supporting behavior-based safety initiatives and compliance
• Create AutoCAD layout scenarios for process improvements and facility projects
• Provide flexible support for off-shift or time-sensitive projects when required

What We’re Looking For

Education

• Bachelor’s or Master’s degree in Industrial Engineering, Manufacturing, Mechanical Engineering, or related field

Experience

• 3–5+ years of experience in a manufacturing or production environment
• Proven success leading Kaizen events and implementing CI initiatives
• Experience working cross-functionally and influencing at multiple organizational levels

Technical Skills

• Strong expertise in Lean tools (VSM, 5S, Kaizen, SMED, TPM, PDCA, one-piece flow)
• Solid analytical skills (time studies, root cause analysis, Excel-based data analysis; Minitab or Power BI a plus)
• Experience with CAD tools (AutoCAD, SolidWorks)
• Familiarity with ERP/MES systems and manufacturing data environments
• Knowledge of ergonomic design, layout optimization, and automation concepts

Preferred

• Lean Six Sigma certification (Green Belt or Black Belt)
• Background in metal fabrication, welding, laser cutting, or low-volume/high-mix manufacturing
• Experience with SAP, MS Project, MES, or automation project coordination

Why This Role Is Attractive

• Highly visible CI role with real ownership and measurable impact
• Opportunity to shape lean culture and daily management systems
• Hands-on environment with strong leadership engagement
• Competitive compensation and comprehensive benefits
• Long-term growth opportunities within manufacturing and operational leadership

Interested?

This search is being conducted by Bluewater Hayes, an executive search firm specializing in manufacturing, engineering, and operations talent. Qualified candidates will receive full details about the organization during the interview process.

CAD Designer II (Direct hire)

Location – Lexington, VA

Requisition: 7611

Annual Salary Range: $60,000 - $80,000 base salary. Individual salaries are based on education, geographic location, and alignment to the market data.

Summary for Designer 2

The CAD Designer II will be responsible for the development of electromechanical product designs using current CAD technology to meet customer requirements in the most economical manner. This position may report to a Senior Designer, Senior Level Engineer, or Engineering Manager

Responsibilities for Designer 2

• The Designer will provide 2D and 3D CAD modeling, detailed drawing documentation and advance level design support for the creation of cooling products and their sub components for multiple projects at the same time.
• The candidate may communicate directly with the customer’s engineering and/or design team, suppliers or facilities.
• The designer will also be in charge of creating approval drawings, shop floor detailed drawings, bill of materials, upload drawings to PDM system and support the routing process.

Requirements for Designer 2

• Requires a 2 year Associate Degree in Mechanical or Electrical Design or related technical discipline with 5+ years design experience, or 8-15 years equivalent design experience with 3D modeling preferable SolidWorks.
• Experience in all aspects of computer modeling and drawing documentation with additional consideration to clarity of presentation and conformance to Standard Practices & Work Instructions. Advance level of experience in 3D modeling and parametric design.
• Experience with sheet metal modeling and detailing.
• Experience in electrical design using AutoCAD
• Must be able to design and detail electromechanical drawings from sketches with limited information.
• Experience in handling 3D large model assemblies.
• Advanced ability in use of computer applications such as text documents, e-mail, scheduling, Bill of Materials and routings.
• Advanced ability in design activity with consideration to clearances, component fit and function, ease of manufacturing, safety, customer needs and expectations.
• Familiarity with design requirements, tooling, manufacturing and assembly operations of multiple product lines.
• Ability to write CR and perform drawing modifications in order to accommodate production needs.
• Knowledge of Chiller Designs or Basic Refrigeration Systems and its components is a plus
• Resolve design problems independently.
• Coordinate multiple projects at the same time.
• Operate in a team and closely with individuals. Be an active participant and instruct/lead/direct/carry out the activities of others.
• Solid Works or Creo experience preferred

Benefits for Designer 2

• Competitive health, dental & vision insurance coverage
• Employee Assistance Program
• Maternity Leave
• Paternity Leave
• 401k Retirement plan and company paid match
• Life Insurance
• Health Savings Account (HSA) with employer contribution
• Flexible Spending Accounts (FSA)
• Short Term Disability (company paid)
• Long Term Disability
• Competitive time-off policies
• Tuition Reimbursement

Overview

We are partnering with a well-established, global manufacturing organization to identify a Senior Manufacturing Engineer who thrives on solving complex production challenges. This role is ideal for a hands-on engineer who enjoys taking projects from concept through execution, working closely with operations, maintenance, and external vendors.

The position focuses on improving manufacturing processes, designing or specifying equipment, supporting new product launches, and leading capital projects that directly impact safety, quality, cost, and throughput.

What You’ll Be Doing

• Identify and analyze manufacturing process problems and develop multiple solution paths
• Evaluate technical solutions based on cost, efficiency, ROI, and manufacturability
• Design manufacturing equipment or specify capital equipment and tooling
• Lead installation, setup, debugging, validation, and operator training for new equipment
• Support new product introductions and model launches using APQP methodology
• Manage project scope, timelines, and capital expenditures (AFEs)
• Act as a technical liaison between plant operations, engineering leadership, and vendors
• Drive continuous improvement initiatives using lean manufacturing principles
• Maintain strong working knowledge of plant equipment, automation, and production systems

What We’re Looking For

• Bachelor’s degree in Engineering (Mechanical or Electrical preferred)
• 5+ years of experience in manufacturing, industrial, or process engineering
• Strong mechanical background, particularly with automated manufacturing equipment
• Experience designing or specifying manufacturing equipment and tooling
• Proficiency with CAD software (SolidWorks, Solid Edge, AutoCAD, or similar)
• Solid understanding of lean manufacturing principles
• Experience supporting product launches using APQP
• Ability to manage multiple projects independently with minimal supervision
• Comfortable working cross-functionally with operations, maintenance, and vendors
• Working knowledge of Windows-based systems and industrial machine interfaces

Why This Role Is Attractive

• High-impact engineering role with visible ownership of capital and process projects
• Opportunity to work on complex automation and equipment installations
• Stable, well-capitalized manufacturing environment
• Strong benefits package including healthcare, retirement, paid time off, and tuition support
• Long-term growth potential within manufacturing and engineering leadership tracks

Interested?

This search is being conducted by Bluewater Hayes, an executive search and recruiting firm specializing in manufacturing, engineering, and operations leadership. Qualified candidates will receive full details on the organization during the interview process.