Engineering Jobs in Ridgecrest, CA
15 positions found
PilotCBP Air Interdiction Agent
NEW RECRUITMENT AND RETENTION INCENTIVES!
Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.
If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!
DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!
Duty Locations
Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:
Southeast Region:Homestead, FL and CAMB:Aguadilla, PR
Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX
NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX
Duties and Responsibilities
As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:
- Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
- Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
- Collecting, refining, and analyzing strategic and tactical intelligence.
- Supporting search and rescue and humanitarian efforts.
Salary and Benefits
Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).
Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)
Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.
This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).
Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).
- GS-11, 1st year annual pay - $106,588
- GS-12, 2nd year annual pay - $127,754
- GS-13, 3rd year annual pay - $151,918
Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).
- GS-11, 1st year annual pay - $115,115
- GS-12, 2nd year annual pay - $137,974
- GS-13, 3rd year annual pay - $164,071
Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).
- GS-11, 1st year annual pay - $127,906
- GS-12, 2nd year annual pay - $153,305
- GS-13, 3rd year annual pay - $182,302
Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.
- RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)
- RI: Retention Incentive (25% for Key West, FL)
RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)
Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications
Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:
- Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
- Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
- Developing strategies and coordinating aircraft and ground assets.
- Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
- Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.
Hiring Minimums:
Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:
- Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
- Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
- Helicopter Rated: Rotorcraft Helicopter with instrument rating.
- Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).
Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.
250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.
FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.
Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)
UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.
NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.
Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply
There Are Three Ways to Apply to Become an Air Interdiction Agent:
- Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR
- Apply onUSAJOBS;OR
- Apply onAirline Apps.
Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
RequiredPreferredJob Industries- Government & Military
This individual will be responsible for maintaining, troubleshooting and repairing electronic equipment and will have the ability to apply their technical knowledge of electronic principles.
JT4 provides engineering and technical support to multiple western test ranges for the U.S.
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
We develop and maintain realistic integrated test and training environments, and prepare our nation's war-fighting aircraft, weapon's systems and air crews for today's missions and tomorrow's global challenges.
**This position is located at China Lake and is not eligible for telework
** **Ideal candidate will have an active secret clearance
** Range Requirements Scheduling and coordination of telemetry resources.
Possess a comprehensive understanding of telemetry, communications, and Range telemetry data paths and transport methods.
Operate telemetry recording systems.
Troubleshoot and perform diagnostics using the appropriate test equipment.
Strong computer skills.
Job Summary -- Essential Functions/Duties Working under general technical guidance, an Electronic Technician specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing Employee will be responsible to perform the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems Apply technical knowledge of electronic principles to solve basic problems using diagrams, schematics, engineering data, and test equipment Diagnose equipment malfunctions and effect repairs to restore equipment to required operating condition Manipulate computer keyboards and view and interpret computer displays Troubleshoot to the component level and make needed repairs Perform other job-related duties, as required.
Requirements -- Education, Technical, and Work Experience Education and/or training from an accredited college or technical school with courses in math, basic electronics, and microwave theory, or a military equivalent and three years of hands-on experience are required for this position.
In addition, an Electronic Technician must possess the following qualifications: International Society of Certified Electronics Technicians (ISCET) certification Demonstrated proficiency in general electronics Good understanding of electronic, electro-mechanical, and computer systems Good understanding of test equipment used to maintain and repair equipment Experience with tubes, transistors, logic gates, and/or high-power RF devices Demonstrated ability to troubleshoot to the component level and competency in soldering.
The expected salary range for this position is $69,014.40 to $85,411.04 annually.
The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Employee will be required to work some shift work, at remote locations, and occasional over-night assignments.
Work is performed both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Grease or oil may be found on working surfaces.
Outdoor duties may be performed on gravel or shingled roof.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs, (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.
S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JELT4; A4CLR
The Video Engineer will integrate with existing branch engineering teams to support ongoing operations, system development, testing, and modernization efforts.
All work will be performed in alignment with government priorities and technical direction.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active DoD secret clearance
** **This position is located at China Lake and is not eligible for telework
** Range Requirements The Video Engineer support will encompass real-time video operations, including video and audio recording and display systems and pathways.
The engineer will work in collaboration with the branch's technical and engineering teams and provide technically sound advice to managers and peers on the technical aspects of system development, and may require managing small to medium-sized projects.
The engineer's assignments can range from major portions of large-scale projects to entire medium-scale ones.
They will also be responsible for developing or testing new equipment to improve the functionality of new or existing system.
Support Real-Time video operations, including video and audio recording systems, display systems, and associated signal distribution pathways.
Collaborate with Mission Control technical and engineering personnel to support system operations, sustainment, and development activities.
Provide technically sound recommendations and guidance to government managers and peers related to video and display system development, integration, and performance.
Manage and/or support small- to medium-sized projects and perform major tasking on large-scale engineering efforts as directed.
Develop, integrate, test, and evaluate new or modified equipment to improve the functionality and reliability of existing and future systems Job Summary -- Essential Functions/Duties Under close supervision, a Video Engineer performs a variety of fundamental field engineering tasks in the installation, operations, testing, and maintenance of electronic equipment and systems.
Work is at an entry level and is generally performed as a member of a project team.
Employee will be responsible for the following functions/duties: Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to engineering specialty Perform fundamental engineering tasks requiring standard techniques, such as tolerance studies and design calculations Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Assist in preparation of reports, correspondence, or technical studies Perform other job-related duties, as required Requirements -- Education, Technical, and Work Experience An associate's degree in engineering or formal academic/vocational training, or military equivalent and four or more years of technical/professional experience in the specialty field are required for this position.
In addition, a Video Engineer must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform relatively routine engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Effective verbal and written communication skills Planning/organizational skills Salary The expected salary range for this position is $96,491.20 to $111,491.20 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A4CLR
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
- $120,000 As Distributed Targeting Processor -Networked (DTP-N) Systems Engineer supporting the F/A-18 and EA-18G Integrated Product Team (IPT) the incumbent will be required to support requirements analysis, acquisition, test, and Fleet support for DTP-N and other CNI / AVMS efforts as required.
Essential Job Functions: Must perform system integration activities throughout the life cycle of the F18 block upgrades.
Independently interface with all levels of the F18.
IPT as well as external organizations (e.g.
Program Office, Technical Program Office (TPO), NAVAIR, Boeing, NGC, etc.) on matters related to Weapons integration, project planning, scheduling, document preparation, engineering assessments and integration planning.
Attend and participate in required system milestone meetings and technical interchange meetings as required.
Follow and identify processes and procedures to develop documentation (detailed procedures, data packages, etc.) for system level milestones and tests in accordance with F18 IPT standards, specifications and procedures.
Lead and participate in the reviews of system level documentation such as requirements documents, specifications documents, interface documents, and studies.
Incumbent will provide engineering analysis, recommendations and solutions for complex challenges during system design and anomaly corrections.
Ensure required documentation (detailed procedures, etc.) is developed for all tests and is in accordance with current standards and processes.
Respond to inquiries from fleet operators and support personnel.
Provide technically sound recommendations and guidance to managers, supervisors, peers, and sponsors on specific technical aspects of F18 Weapons Systems.
The incumbent will be required to utilize Asset Management, Planning, and Scheduling Solution (AMPSS), Operational Flight Program Project Status (OPS) and Open system Engineering Environment (OSEE) requirements management software.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
citizenship is required.
Bachelor's Degree with an engineering major (including those specified for Aerospace, Mechanical or Electrical Engineers are acceptable) with 5 or more years of experience.
Hold and maintain a Secret security clearance.
Must be clearable to the Top-Secret/SCI level.
Integration, Software Engineering, Program Technical Services, Design, Fabrication and Integration Services, Aircraft Modification Services or Training Services as applicable.
Desired Skills: Experience with DTP-N.
Experience with F/a-18 and EA-18G aircraft platforms.
- $115,500 As the Joint Mission Planning Systems- Systems Engineer, you will coordinate and perform Mission Systems (MS) team integration activities for the F/A-18 & EA-18G aircraft USN and FMS variants.
Perform as the F/A-18 & EA-18G IPT primary contact point with contractors, program managers, and sponsors for MS team projects involving the Joint Mission Planning System (JMPS).
Essential Job Functions: Independently interface with all levels of the F/A-18 IPT as well as external organizations (e.g.
Program Office, Aircraft PMAs, NAVAIR, Boeing, Raytheon, etc.) on matters related to JMPS integration, project planning, scheduling, document preparation, engineering document assessment and integration planning.
Obtain and maintain adequate qualifications with current standards, procedures and schedules.
Develop plans and make written and oral presentations to contractors, sponsors, and IPT management on program status, technical problems, scheduling, and costs.
Provide technically sound advice and guidance to managers, supervisors, peers, and sponsors on specific technical aspects of JMPS.
Perform as an Initiative Architect (IA) for aircraft software changes involving JMPS and associated subsystems installed on the F/A-18 & EA-18G platforms and develop integrated breakdown structure (IBS) plans and asset requirement plans encompassing the development and verification phases of developmental software.
Provide engineering analysis, recommendations and solutions for complex challenges during system design and anomaly corrections.
Ensure that required documentation (detailed procedures, etc.) is developed for all tests and is in accordance with current standards, procedures and schedules.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Must have a Bachelor's degree with 8 plus years of related experience.
Will also consider a Master's degree with 6 plus years of related experience.
Must be able to work onsite
- This position is not remote work eligible.
Must be able to obtain and maintain a Top Secret clearance.
Travel may be required.
Desired Skills: Experience with F/A-18 or EA-18G aircraft platforms a plus.
Familiarization with Mission Planning is a plus.
Work is at an entry level and is generally performed as a member of a project team under close supervision.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active DoD secret clearance
** **This position is located at China Lake and is not eligible for telework
** Job Summary -- Essential Functions/Duties Under close supervision, a Field Engineer I performs a variety of fundamental field engineering tasks in the installation, operations, testing, and maintenance of electronic equipment and systems.
Work is at an entry level and is generally performed as a member of a project team.
Employee will be responsible for the following functions/duties: Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to engineering specialty Perform fundamental engineering tasks requiring standard techniques, such as tolerance studies and design calculations Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Assist in preparation of reports, correspondence, or technical studies Perform other job-related duties, as required Requirements -- Education, Technical, and Work Experience An associate's degree in engineering or formal academic/vocational training, or military equivalent and four or more years of technical/professional experience in the specialty field are required for this position.
In addition, a Field Engineer I must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform relatively routine engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Effective verbal and written communication skills Planning/organizational skills Salary The expected salary range for this position is $76,356.80 to $91,356.80 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A4CLR
- $87,000 Seeking a Software Engineer to evaluate and verify that F/A-18 Software Development products and software activities adhere to established standards and processes.
Essential Job Functions: Perform software product and process evaluations using standards and checklists to verify accuracy of requirements, software deliverables, phase activities, milestones, and software releases.
Verify integrity of software build processes and content for delivered products.
Participate in product inspections through each phase of the software lifecycle.
Investigate, analyze, and resolve reported software anomalies.
Report non-compliance issues to the Software Development Team Lead (or their designee).
Participate in process improvement activities as assigned.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Bachelor's Degree in Computer Science/Engineering is preferred plus at least 1 year of relevant experience.
Must be eligible to obtain and maintain a security clearance for duration of the assignment.
Familiar with the software development lifecycle.
Experience in Software Quality Assurance.
Experience with interpreting flow charts, and Assembly Language.
Self-guided, inquisitive, and able to research how executables and scripts function by investigating source code.
Detailed-oriented with strong organizational skills.
Excellent communication skills (oral and written) with tact and professionalism.
Candidate must have the ability to work independently within a team environment.
Working knowledge of the Microsoft Office Suite, specifically Word, Excel, and PowerPoint.
Desired Skills: Experience with low level software design, and structured software development methodologies.
The role is responsible for writing, editing, and proofreading technical documents while interfacing with engineers.
The technical publisher will also be responsible document management control functions.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active Secret clearance
** **This position is located at China Lake and is not eligible for telework
** Job Summary -- Essential Functions/Duties Plan, design, write, edit, and proofread documents such as external customer correspondence, contract deliverables, and training manuals, and internal documentation such as proposals, correspondence, and contract requirements.
Employee will be responsible to perform the following functions/duties: Advise program management staff and external customers on correct procedures and instructions required in the publication of documents, which includes in-depth knowledge of customer requirements and specifications regarding documentation and publication standards.
Edit reports, publications, proposals and correspondence to ensure clarity of content, consistency of format, and accuracy of grammar.
Interface with engineers and technical professionals in the writing, editing and publication of various types of customer documents such as training manuals, concept of operations, and contract deliverables.
Interface also occurs with external customers, providing the same support.
Responsible for quality control, production, and distribution of documents in accordance with customer requests and schedules.
Participate in department and company-wide proposal writing projects.
Utilize appropriate computer software for document text production.
Investigate and implement best ways to produce documentation electronically while still providing high quality output with rapid turnaround.
When workload permits, provide senior-level technical writing/editing and advisory support to a small business company which is contracted to us for support.
Establish and maintain electronic and/or hardcopy data library of documents and work order files for documents received for processing.
Perform all other position related duties as assigned or requested Requirements -- Education, Technical, and Work Experience Bachelor's degree in English, Journalism or related discipline and at least three years of job-related experience or equivalent work experience and training.
In addition, a Technical Publishing II must possess the following qualifications: Excellent written communication skills Must have working knowledge of word-processing and integrated software applications Must possess organizational skills and ability to perform detail-oriented work Must qualify for and maintain a government security clearance Must possess a valid, state-issued driver's license.
The expected salary range for this position is $73,632.00 to $88,632.00 annually.
The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions This position is performed in a typical office environment with no unusual hazards.
There is occasional lifting up to (20) pounds, constant sitting while using a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
The incumbent must possess planning/organizing skills and must be able to work under deadline.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses / certifications and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JTWP11; A4CLR
This role is responsible for assessing, developing and implementing programs and controls set in place to help increase cybersecurity within our company.
The Information Systems Security Specialist will be detail-oriented, have great problem-solving and analytical skills, and a passion for cybersecurity.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active DoD secret clearance
** **This position is located at China Lake and is not eligible for telework
** Job Summary -- Essential Functions/Duties This position is the on-site technical specialist for monitoring information systems and maintaining the environment of operation to include developing and updating System Security Plans, managing and controlling changes to the systems, conducting audits, providing incident response, perpetration for vulnerability assessments, and assessing the security impact of security and non-security-relevant changes.
Employee will be responsible to perform the following functions/duties: Provides incident handling in conjunction with the Facility Security Office (FSO) and Information Security Officer / Information Systems Security Manager (ISSO/ISSM) Assists in writing and maintaining computer security processes to meet Air Force requirements of Risk Management Framework Monitors computer system use and audits logs Makes recommendations for future hardware / software implementations and related process improvements This position requires skills in team building and customer service Provides operational status as required Uses established policies and procedures and subject matter knowledge to complete complex assignments requiring originality and ingenuity performed under minimum supervision with considerable latitude for independent contribution Provides security training and awareness briefings Other duties as assigned.
Requirements -- Education, Technical, and Work Experience Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training/certification.
Possess two to three years of experience in computer system security and/or related areas of expertise.
Must be compliant to DoD 8570.01-M levels and possess or working toward Security+ certification with a CISSP desired.
Should have experience with JSIG, NIST 800 and NISPOM, Chapter 8.
In addition, an Information Systems Security Specialist must possess the following qualifications: Must possess and apply a broad knowledge of principles, practices and procedures in computer security and information systems and working experience with Microsoft Office, Access, and Visio Must possess experience supporting various system configurations such as Stand Alone, Local Area Networks, and Wide Area Networks Must possess excellent skills in verbal and written communications, planning, and organizing Ability to work under deadlines.
Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments.
Government vehicle is used on an as-needed basis Ability to work in a field environment at remote locations with occasional overnight assignments Must qualify for and maintain a government security clearance Must possess a valid, state-issued driver's license.
Salary The expected salary range for this position is $83,907.20 to $98,907.20 annually.
The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JCIS11; A4CLR
This role is responsible for assessing, developing and implementing programs and controls set in place to help increase cybersecurity within our company.
The Information Systems Security Specialist will be detail-oriented, have great problem-solving and analytical skills, and a passion for cybersecurity.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active DoD secret clearance
** **This position is located at China Lake and is not eligible for telework
** Job Summary -- Essential Functions/Duties This position is the on-site technical specialist for monitoring information systems and maintaining the environment of operation to include developing and updating System Security Plans, managing and controlling changes to the systems, conducting audits, providing incident response, perpetration for vulnerability assessments, and assessing the security impact of security and non-security-relevant changes.
Employee will be responsible to perform the following functions/duties: Provides incident handling in conjunction with the Facility Security Office (FSO) and Information Security Officer / Information Systems Security Manager (ISSO/ISSM) Assists in writing and maintaining computer security processes to meet Air Force requirements of Risk Management Framework Monitors computer system use and audits logs Makes recommendations for future hardware / software implementations and related process improvements This position requires skills in leadership, team building and customer service Provides operational status as required Uses established policies and procedures and subject matter knowledge to complete complex assignments requiring originality and ingenuity performed under minimum supervision with considerable latitude for independent contribution Provides security training and awareness briefings Other duties as assigned.
Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Requirements -- Education, Technical, and Work Experience Associates or higher degree in Computer/Information Technology, or equivalent academic/technical training/certification.
Possess two-three years of experience in computer system security and/or related areas of expertise.
Must be compliant to DoD 8570.01-M levels and possess or working toward Security+ certification with a CISSP desired.
Should have experience with JSIG, NIST 800 and NISPOM, Chapter 8.
In addition, an Information Systems Security Specialist I must possess the following qualifications: Must possess and apply a broad knowledge of principles, practices and procedures in computer security and information systems and working experience with Microsoft Office, Access, and Visio Must possess experience supporting various system configurations such as Stand Alone, Local Area Networks, and Wide Area Networks Must possess excellent skills in verbal and written communications, planning, and organizing, and be able to work under deadlines.
Employee is expected to routinely cross fields in the completion of somewhat difficult and varied assignments; government vehicle is used on an as-needed basis Must possess ability to work in a field environment at remote locations with occasional overnight assignments Must qualify for and maintain a government security clearance Must possess a valid, state-issued driver's license.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
**An ideal candidate will have an active Secret clearance
** **This position is located at China Lake and is not eligible for telework
** Job Summary -- Essential Functions/Duties Employee will be responsible for the following functions/duties: Install, monitor, and service equipment and systems at company and client sites Perform and assist with tests and evaluations, check-out, and certification tasks Perform validations and verifications of various electronic systems Review engineering change proposals for equipment impacts Assist in creating engineering change instructions Develop technical/engineering data for planned maintenance systems, technical drawing updates, operating procedures, and maintainability improvements Support systems engineering activities with general subject matter knowledge Establish and maintain filing systems, databases, and logs as needed for tracking project status and inventory Assist work unit personnel as the on-site customer interface for equipment/system installation, testing, fabrication, and other engineering tasks Provide technical data and evaluation for components, equipment, and systems consistent with engineering plans, layout, and contract requirements Use established policies and procedures and subject matter knowledge to complete assignments of moderate complexity that vary in nature and sequence Perform other job-related duties, as required Requirements -- Education, Technical, and Work Experience Vocational/technical training beyond high school from an academic institution, or equivalent military training, and three years of job-related experience or equivalent hands-on experience are required for this position.
In addition, an Engineering Technician II must possess the following qualifications: Working knowledge of computer systems and integrated software application programs Good communication and analytical skills Planning/organizational skills Ability to work under deadlines The expected salary range for this position is $48,068.80 to $54,080.00 annually.
The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50% up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A4CLR
- $77,100 As a Joint Mission Planning System (JMPS) Analyst/technician incumbent will provide JMPS System support by performing Post Install software and security patches as well as Aircraft Mission Data imports and final system build performance checks on machines to ensure the systems are configured and ready to support Lab, Ground, and Flight Test for the IPT, Technical Program Offices (TPOs), along with other outside agencies as required.
Essential Job Skills: Under the guidance of the JMPS System Administrator (SA), ensure JMPS technical documentation is developed and reviewed in support of system specifications.
Provide Mission Planning expertise, troubleshoot Planning issues, and support System Engineers (SEs) and Flight Test Engineers (FTEs) during planning sessions.
Provide JMPS system support to local Squadrons and the F/A-18 and EA-18G Test Community as a whole regarding Mission Planning and communicate any issues to the Mission System’s Team Lead and F18 UPC Product Lead.
Assists with data analysis, researching Engineering Control Documents to determine intended system function, and verifying functionality of systems to contribute to troubleshooting efforts by engineers.
Due to tempo and the critical nature of mission planning, the employee will be required to work independently, make priority decisions, and make informed judgments to support command goals and schedules.
Routinely brief Mission Systems Leadership on status, risk mitigation, and schedule of JMPS System builds and usage.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Must have a high school diploma with 10 years of related experience or an associate’s degree with 4 years related experience.
Will also consider bachelor's degree with 2 plus years of related experience.
Must be eligible to obtain and maintain a security clearance for duration of the assignment.
Must be able to work onsite
- This position is not remote work eligible.
Must have the ability to work with various server and workstation operating systems.
Desired Skills: Familiarization with Joint Mission Planning System (JMPS) software a plus.
Operating systems certification.
Security+ Certification.
DOD 8570.01-M certification.
- $18.00 Provide temporary engineering support for the F/A-18 and EA-18G Program.
Essential Job Functions: Support engineers with general engineering principles such as design, testing, analysis, and project support, learning safety/quality procedures, participating in meetings, and gaining hands-on experience in areas like test support, data collection, and documentation, all while developing problem-solving and communication skills.
Support the creation, storing, and destruction of engineering documents.
Support the acquisition, delivery, storage, and integration of software for engineering functions.
Assist in varying engineering processes to include: Analysis of test information, Configuration Management, and Data Management.
Provide administrative and security support for the organization.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Pursuing a degree in a core engineering discipline.
Acquire and maintain security clearance.
Must be able to climb stairs and lift 40 pounds.
Must have Microsoft Suite experience and be proficient in MS Word, MS Excel, and MS Power Point.
Excellent communication and Teaming skills.
Must demonstrate the ability to prioritize.
Must have outstanding communications skills, both written and verbal.
Desired Skills: Familiarization with Agile and the ability to work within small groups or Scrum teams.
Familiarity with the DOD acquisition process.
Familiarity with the F/A-18 aircraft.
The position will manage software/system projects and provide guidance to technical staff.
**An ideal candidate will have current Secret clearance and must be Top Secret eligible
** **This position located at China Lake and is not eligible for telework
** JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties A Software Systems Engineer III provides software and systems engineering services, generally within a work unit or group.
Employee will be responsible for the following functions/duties: Advise team and project managers on technical problems Interact with customers and project managers on a regular basis Work independently of direct supervision on projects of high complexity Use judgment and initiative in developing complex analytical and computational technologies and methodologies for solving problems, which may be technically unique to the industry Interpret customer requirements and develop and analyze the most appropriate approach to solve technical problems Develop design of system/software and associated design documentation Prepare and conduct design reviews Implement design through software coding or hardware and appropriately document the design implementation Plan and execute unit, integration, and system testing Participate in maintenance and sustainment activities of system/software Provide work direction or other guidance to subordinate technical staff Establish and maintain positive customer relations May support pursuit of new business efforts, lead proposal efforts, and act as a technical consultant Perform other job-related duties, as required Range Requirements Demonstrates a knowledge of standard programming algorithms, design patterns, and object-oriented software design Demonstrated ability to program using C++ language code, C, and Python 3 Develops parallel processes, threading, process communication Familiar with utilizing Git for daily code management, including branching, merging, and resolving conflicts within a collaborative development environment Works proficiently with Git in both Bash (Linux) and Windows environments Interacts with remote repositories, pushes code updates, and manages local repositories Adheres to established branching strategies and understands the implications of working with master/production branches Collaborates with team members to design future enhancements Familiarity with time-series analysis a plus Familiarity with Red Hat Linux Familiarity with live-virtual-constructive simulation and aircraft avionics, MIL-STD-1153 and MIL-STD-1773 Individual must be capable of obtaining and maintaining a DOD Top Secret clearance Requirements -- Education, Technical, and Work Experience One of the following educational requirements must be met for this position: A bachelor's degree in an associated discipline and a minimum of four years of related experience A master's degree in an associated discipline and a minimum of two years of experience A PhD in an associated discipline In addition, a Software Systems Engineer III must possess the following qualifications: Experience with computer-based systems and applications Programming skills in languages used for job-specific programming tasks Familiarity with the application of industry standard hardware and software design and documentation techniques Experience with systems engineering and software development lifecycles Effective oral and written communication skills Good planning/organizational skills Salary The expected salary range for this position is $123,281.60 to $169,517.92 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses / certifications and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JSD12; A4CLR
