Engineering Jobs in North Carolina
247 positions found
The Forensic Structural Engineer will branch out from typical design work and investigate to determine the cause of failures related to building structures. This role consists of very little to near no design aspects. The focus is on the laws of physics, and the basis of engineering principles, and the correct application of these to the built environment. The role requires the engineer to “go beyond the code and like it!
Essential Functions
Complete hands-on failure analysis assignments in the field and testing facility
Document facts and report finalization of findings
Technical research
Ability to apply theories and knowledge to real world situations
Complete assignments on time as requested by client
Conduct ethical practices consistently
Convey complex issues in an understandable manner to a lay audience through report writing
Essential Skills for Performing the Job
Self-motivated
Problem-solving
Detail-oriented
Written and verbal communication
Required Education and Experience
Master's in civil engineering
Ph.D. in civil engineering
5 years supervisory or project management experience
Other Requirements
Licensed Professional Engineer
Valid Driver's License in good standing, and demonstrated safe driving habits
Ability to pass a background check as required for the position
Position Type/Expected Hours
This is a full-time position. Some flexibility in hours is permitted, but s/he must be available during the standard work hours of 8:00 AM to 5:00 PM.
Physical Demands
This position is a combination of fieldwork, travel-related work, and sedentary work. An employee is regularly required to drive, stand, sit, walk, reach, type, talk, hear, balance, stoop, kneel, crouch, crawl, climb, push, pull, carry, and lift up to 50 pounds. An employee may also be required to traverse wooded and/or uneven terrain, enter structures, use ladders, walk on roofs, enter small spaces, and work in various weather conditions.
Travel
Regular travel will be required as a part of the Structural Forensic Engineer job. Some overnight travel may be required.
Disclaimer
Please note this position description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Eligible candidates will be legally authorized to work in the United States without employment visa sponsorship.
Nederveld Inc. is an Equal Opportunity Employer.
The Software Engineering team delivers next-generation application enhancements and new products for a changing world. Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics — all with the most advanced technologies, tools, software engineering methodologies and the collaboration of internal and external partners.
Join us to do the best work of your career and make a profound social impact as a Software Principal Engineer on our Software Engineering Team in Hopkinton, Massachusetts or Durham, North Carolina.
What you’ll achieve
As a Software Principal Engineer, you will be responsible for developing sophisticated systems and software based on the customer’s business goals, needs and general business environment creating software solutions.
You will:
Responsible for the development and maintenance of data recovery software for Dell’s storage product in a scrum team-oriented environment
Contribute to the design and architecture of new features according to the product manager and customer’s requirement
Build and review design, functional, technical and/or user documentation as needed
Develop, review and implement test cases for software products and systems
Triage and debug different issues found by testing and in customer cases
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
Bachelor’s degree in Computer Science or related field
10+ years of proven experience in complicated system, e.g. critical telecom product, OS (multi-threading, locks, scheduling), storage protocols (NFS, CIFS, iSCSI), storage technologies (SAN, NAS, RAID, OSD, snapshot, replication), networking, device drivers, clustering, etc.
Strong C/C++ and Python programming skills
Strong Linux/Windows kernel programming skills
Ability to code/debug sophisticated programs in a large and complicated code base, using either written or verbal design specifications
Desirable Requirements
Knowledge and expertise in file systems and data recovery development
Experience with Agile and Scrum methodology
Compensation: Dell is committed to Fair and Equitable compensation practices. The Base Salary Range for this role is $178,000 - $230,000.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R282863
The Software Engineering team delivers next-generation application enhancements and new products for a changing world. Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics — all with the most advanced technologies, tools, software engineering methodologies and the collaboration of internal and external partners.
Join us to do the best work of your career and make a profound social impact as a Senior Software Engineer on our Software Engineering Team in Hopkinton, Massachusetts or Durham, North Carolina .
What you’ll achieve
As a Senior Software Engineer, you will be responsible for developing sophisticated systems and software basis the customer’s business goals, needs and general business environment creating software solutions.
You will:
Be responsible for the development and maintenance of data path software for Dell’s storage product in a scrum team-oriented environment
Contribute to the design and architecture of new features according to the product owner and customer requirements
Build and review design, functional, technical and/or user documentation as needed
Develop, review and implement test cases for software products and systems
Triage and debug different issues found by testing and in customer cases
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
Bachelor’s/ master’s degree in computer science or related field
5–8 years of proven experience in Enterprise class embedded system, e.g. Storage Array, distributed systems ( multi-threading, locks, scheduling ), storage technologies (SAN, NAS, RAID, snapshot, replication), networking, device drivers, clustering, etc.
Strong in Object-oriented design, C/C++ and Python programming skills and strong debugging skills using gdb
Strong Linux/Windows kernel programming skills
Ability to code/debug complex programs in a large and complicated code base, using either written or verbal design specifications
Desirable Requirements
Knowledge in storage protocols (NFS, CIFS, iSCSI),
Knowledge and expertise in file systems and data recovery development
Compensation
Dell is committed to fair and equitable compensation practices. The base salary range for this position: $ 150,000 to $193,000.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member - right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R276912
At Butterball, we exist to help people pass love on. As the most recognized name in turkey, the brand represents more than 60 years of cherished memories, providing quality, great tasting products that make meals something to celebrate every day. We proudly believe that life at Butterball means having a team who supports you, having the opportunity to grow personally and professionally, and making an impact on the health of others daily.
Whether you choose to work at one of our five (5) manufacturing facilities in NC, AR, MO, farms in AR, NC, and KS, corporate office in NC, IL, or in the field, we believe we have an opportunity for everyone to succeed. At Butterball, we believe in fostering a culture where every team member is valued, has the opportunity to grow professionally and contribute to our success. Join us in our Purpose and apply for an opportunity today!
Key Responsibilities:
- Analyze and troubleshoot electrical and mechanical systems in facility production equipment, identifying root causes and engineering solutions to prevent recurrence.
- Design and implement improvements to electrical control systems to optimize production efficiency and reduce downtime.
- Develop and oversee preventive programs based on engineering analysis to enhance overall equipment performance.
- Ensure all electrical systems and components comply with relevant safety regulations and electrical codes.
- Read and interpret electrical schematics and technical documentation to guide system diagnostics and upgrades.
- Program and configure Allen Bradley hardware, software, and drives for production automation and process control.
- Lead technical projects, including the installation and commissioning of new equipment and system upgrades.
- Collaborate with cross-functional teams, including production and quality assurance, to maintain compliance with Good Manufacturing Practices and product standards.
- Provide technical training and guidance to maintenance staff and production operators on electrical systems and best practices.
- Maintain up-to-date documentation on electrical systems, modifications, and activities for compliance and continuous improvement efforts.
Knowledge, Skills, and Abilities:
- Bachelor's degree in Mechanical, Mechatronics or closely related field.
- Understand and troubleshoot control voltage and line voltage.
- Understanding and utilizing industry electrical prints.
- Effective PLC maintenance and troubleshooting.
- Understands Vacuum theory.
- Ability to work in a fast-paced environment.
- Ability to communicate effectively and follow verbal and written instructions.
- Follow diagrams, operation manuals and manufacturing instructions.
- Must be able to troubleshoot malfunctions in timely manner and find resolution.
- Must pass a background check, drug screen.
- Must be able to read and write.
- Need to be familiar in SPC, HACCP, GMP'S SSOP'S and USDA.
- Computer skills with Excel, PowerPoint, and Word.
- Ability to read technical documents and communicate in English.
Physical Demands:
- Constant standing and walking (8 hours or more per day)
- Lifting, carrying, pushing, or pulling (up to and including 50lbs or more).
- Reaching overhead.
- Working from a ladder of raised platform.
- Reaching below knees.
- Ability to reasonably multitask.
- Working with electricity, tools, and wiring.
- Completing required paperwork in timely manner.
- Using material handling equipment as needed.
Working Conditions:
- Work in damp and cold environment as needed.
- Work with loud and noisy machinery as needed.
- Work in dusty environment when using spice as needed.
- Work with raw meat as needed.
- Work in congested areas as needed.
- Work in tight spaces to complete work.
Butterball Core Competencies:
Caring about people, valuing contributions, and empowering to succeed is the Butterball Way. We recognize the value that different perspectives and cultures bring to Butterball and seek to create an environment where everyone can thrive. Everyone has a seat at the table and is expected to embody our core competencies:
- Safety First: We put safety first. The health, safety, and well-being of our people, products, and turkeys is everyone's responsibility and everyone's jobs.
- Integrity: We trust each other to do the right thing. We act with integrity and gain the confidence and trust of others through honesty, respect, and authenticity.
- Stewardship: We take care of what matters. We are accountable to our commitments and take responsibility for the well-being of our teams, our quality, our customers, our business, our brand, and our communities. We are always answerable for our actions and those we lead.
- Enthusiastic Attitudes: We create a climate where everyone feels they belong and can be engaged, every day. Where our people are enthusiastic and motivated to do their best and work together to make great things happen.
- Continuous Improvement: We are committed to continuous improvement. We challenge ourselves and our company to constantly learn, develop, grow, improve, and innovate.
Disclaimer
We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law.
This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request.
The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer.
Ashley Sling, a division of American Equipment Holdings, is one of the leading rigging and below-the-hook service providers in the United States. Over the years, our ability to grow and set ourselves apart from the competition is the result of a tried and true philosophy – take care of our customers and take care of our people.
We also believe that our people matter, which is why we are committed to providing our team members with competitive wages, attractive benefit offerings, and abundant training offerings. As one of the fastest growing companies in our industry, new opportunities are regularly available that enable our team members to develop, grow, and pursue their career passions.
Objectives of this role
A Rigger Fabricator is responsible for the production of assemblies that are used all over the world in nearly every level of manufacturing. They will learn how to accurately identify different diameters, constructions, and best possible applications for an array of products that are utilized in industries like construction, energy, mining, crane operation, space and aeronautical, deep-sea recovery and rescue. Working closely with experienced staff and learning on the job skills with years of proven quality and effectiveness.
Responsibilities
- Fabricate and assemble various lifting and rigging products including slings (nylon, polyester), wire ropes, lifting devices, rigging hardware, sling protection solutions, hoists, synthetic ropes, and tie-down equipment.
- Interpret engineering drawings, specifications, and customer requirements to ensure accurate fabrication and assembly.
- Inspect finished products to verify conformance to specifications and quality standards.
- Perform routine maintenance and repairs on fabricating equipment and tools.
- Manage inventory levels of raw materials and finished products to ensure availability for customer orders.
- Review, interpret drawings and blueprints and capacity tables.
- Understand codes and specifications as outlined on order tickets
- Calculate wire rope cut lengths, fitting requirements and identify the appropriate equipment to produce all varieties of wire rope and chain assemblies
- Splicing wire robe and fabricating chain slings
- Understanding and operation of industrial swaging machines, proof testing machines, and forklifts (Training is provided)
- Attach proper tags and labels to products
- Report defective or substandard material supplies or product
- Maintain work area, equipment, and tools in a clean and organized manner, and follow all Safety Guidelines
Required skills and qualifications
- Proven experience in fabricating and distributing lifting and rigging equipment, preferably in a manufacturing or industrial setting.
- Expertise in fabricating various types of slings (nylon, polyester, wire rope), wire ropes, lifting devices, rigging hardware, sling protection solutions, hoists, synthetic ropes, and tie-down equipment.
- Strong understanding of materials used in lifting and rigging applications and their respective properties.
- Knowledge of industry standards and regulations related to lifting and rigging equipment.
- Ability to operate fabricating equipment and tools safely and effectively.
- Excellent problem-solving skills and attention to detail.
- Effective communication skills and ability to work collaboratively in a team environment.
What we offer:
We offer competitive compensation and benefits package, including health insurance, retirement plans, and paid time off.
- Cigna Health Insurance (Kaiser in CA)
- FSA & HSA healthcare employer contribution
- Critical Illness, Accidental, and Hospital Indemnity Plans
- Dental and Vision Plans
- Company paid STD & LTD Disability Insurance
- Educational and Tuition Reimbursement
- Maternity (12-wks) and Paternity leave
- Employee Assistance Program
- Basic & Voluntary Life AD&D
- 4% 401K Employer Match, with 6% of your Contribution
- Company Paid Time Off (PTO)
- Company provided PPE
- Discounts on products and services
- Opportunities to network and connect
American Equipment Holdings is an organization of leading overhead crane and hoist, industrial weighing, and below-the-hook service providers in the United States. Together, our companies provide comprehensive solutions for everything related to customers’ overhead crane and hoist, rigging, and weighing and measurement needs, including OSHA mandated inspections, preventative maintenance and repair field services, parts, engineering, ISO certified fabrication, new and replacement equipment, automated systems, system modernizations and training. American Equipment Holdings is one the largest and fastest growing companies in our space with more than 800 dedicated team members that serve thousands of customers throughout the United States.
Our Commitment to Inclusion & Belonging:
At American Equipment Holdings, we are dedicated to engaging with the widest possible range of talent. We believe that diverse perspectives drive innovation and engagement, enabling us to attract creative individuals and develop exceptional products, services, and solutions. We encourage all qualified candidates to apply. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
Proof of right to lawfully work in the United States required.
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Compensation details: 21-22 Hourly Wage
PI7cdb2ce99a2e-37344-40007170
Relocation available!
This role may require extensive travel to other Jabil sites during the first 3–6 months for training, team integration, and operational alignment.
How will you make an impact?
As a Environmental Health and Safety (EHS) Manager, you will be responsible for establishing health and safety policies and procedures which ensure compliance with company, customer, and government regulations within any of the following functions: health and safety, industrial hygiene, or environmental protection.
What will you do?
Recruitment and Retention
- Recruit, interview and hire for the Environmental, Health, and Safety team.
- Communicate criteria to recruiters for the Environmental, Health, and Safety team.
- Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development
- Identify individual and team strengths and development needs on an ongoing basis.
- Create and/or validate training curriculum in area of responsibility (Environmental Management Programs, Safety & Health Programs, Emergency plans, Business Continuity Plan).
- Coach and mentor EHS team members to deliver excellence to every internal and external customer.
- Create and manage succession plans for EHS function.
Performance Management
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
- Solicit ongoing feedback from Manufacturing Managers, peers and team member on team member’s contribution to the team. Provide coaching and counseling to team member based on feedback.
- Express pride in staff and encourage them to feel good about their accomplishments.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in departmental goals.
- Coordinate activities of large teams and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication
- Provide communication forum for the exchange of ideas and information with the department.
- Organize verbal and written ideas clearly and succinctly using an appropriate business style.
- Ask questions; encourage input from team members.
- Assess communication style of individual team members and adapt own communication style accordingly.
- Influence organization to practice proper EHS procedures using marketing strategies and easy to use tools.
Business Strategy and Direction
- Know and understand the campus strategic direction.
- Define, develop and implement an Environmental, Health & Safety strategy that contributes to the campus strategic directions.
- Develop an understanding of the Workcell business strategy as it pertains to EHS.
- Provide regular updates to Facilities Manager and Operations Manager on the execution of the strategy.
Cost Management
- Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
- Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value (i.e. cost of Workers Compensation versus cost of wearing Safety glasses).
- Provide feedback to management on cost and cost trends.
Forecast Development and Accuracy
- Provide feedback to Facilities Manager and Operations Manager on forecasts for the department.
Technical Management Responsibilities
- Drive continuous improvement through trend reporting analysis and metrics management.
- Assess the adequacy of data gathering methods utilized by the workcells.
- Assure that procedures and work instructions are efficient and not redundant.
- Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
- Implement the Environmental, Health, And Safety (EHS) activities in support of ISO 14000. Determine how to influence activities (facilities, building support, EHS, and security) under a single focus to streamline execution.
- Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
- Establish new measurement systems if/where possible.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
- Ensure all sensitive and confidential information is handled appropriately.
- Stay up to date on environmental issues.
- Chair the Safety Committee.
- Manage large projects from start to finish utilizing delegating skills to empower others to take responsibility for segments of the project.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education
- Bachelor’s degree in Environmental, Health and Safety or equivalent preferred
Experience
- 5 years of EHS experience in a manager level position
- Manufacturing industry experience preferably electronics manufacturing
- New site, startup, and/or construction related EHS experience highly desired
Knowledge, Skills, Abilities
- Expert knowledge of ISO 14001 and 45001 Standard and system requirements.
- Knowledge and experience of National Fire Protection Association (NFPA) requirements, specifically NFPA 70E.
- Expert Knowledge and experience with implementation and compliance assurance with Occupational Health and Safety Administration (OSHA) requirements, specifically OSHA 1910.
- Knowledge and experience interpreting and implementing health and safety programs; including, but not limited to: ergonomics, emergency response and incident management, and risk assessments and job hazard assessments.
- Experience implementing management of change, continuous improvement, and organizational leadership concepts.
- Knowledge and experience interpreting and implementing Environmental Protection Agency (EPA), and/or state and local equivalents to evaluate the need for and ensure compliance with regulatory environmental permits.
- Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
- Ability to apply concepts of basic algebra and geometry.
- Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Strong knowledge of global and regional logistics operations and industry.
- Strong proficiency in determining logistics requirements to enable company’s business goals and objectives with ability to devise and implement strategy to achieve targets.
- Strong financial and analytical ability. Proficiency in managing business analytics to determine optimum company footprint.
- Strong knowledge of international direct and indirect taxes as well as global customs regimes.
- Proven track record of successful change management accomplishments, implementing and management continuous productivity and cost reduction programs.
- Strong and convincing communication skills.
- Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.
What can Jabil offer you?
Along with growth, stability, and the opportuni
- As the Sr Industrial Engineer will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence, and cost control within the production site.
- You will adopt to profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.
- As the Sr Industrial Engineer, you will also work on complex products/processes/Workcells and propose and drive cross-functional projects within a Work cell.
What will you do?
- Design of optimized human interfaces for SMT and Backend/DF in the following areas:
- Should be able to be SME or support other IEs in one or more of the IE SME categories like:
- Work Measurement
- Systems and Metrics
- Ergonomics / Workstation and line design
- Capacity Sizing
- PFMEA, DFA
- Fixtures and Tools
- Simulation
- Quoting
- Warehousing
- May perform other duties and responsibilities as assigned.
- Understanding and application of broad range of industrial engineering tools (i.e., Work measurement, simulation, process mapping, facilities and workstation design, operations research, etc.)
- Understanding of Jabil’s global strategies and direction
- Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction.
Education:
- Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or a related technical field.
- Master's degree preferred.
Experience:
- Strong financial and analytical ability.
- Proven record of successful change management accomplishments, implementing and management continuous improvements and cost reduction programs.
- Effective communication skills.
- Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
- As the Test Engineering Manager, you will provide optimum test solutions and strategies through the effective management of people, systems, procedures, and equipment.
- You will drive innovation and continuous improvement within Test Engineering by harnessing innovative technologies in the areas of systems, equipment, and processes.
- As the Test Engineering Manager, you will also provide exceptional support to customers, team members, and shareholders.
What will you do?
Recruitment and Retention:
- Recruit, interview, and hire Assistant Test Engineering Managers.
- Communicate criteria to recruiters for Test Engineer and Test Management position candidates.
- Coach Test Engineering Managers in the interviewing/hiring process.
- Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
- Identify individual and team strengths and development needs on an ongoing basis.
- Create and/or validate training curriculum in area of responsibility.
- Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.
- Create and manage succession plans for Test Engineering and Test Management functions.
Performance Management:
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e., operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
- Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers, and team members on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.
- Express pride in staff and encourage them to feel good about their accomplishments.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of large teams and keep them focused on times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
- Provide communication forum for the exchange of ideas and information with the department.
- Organize verbal and written ideas clearly and use an appropriate business style.
- Ask questions; encourage input from team members.
- Assess communication style of individual team members and adapt own communication style accordingly.
Functional Management Responsibilities:
Business Strategy and Direction:
- Know and understand the campus strategic directions.
- Define, develop, and implement Test Engineering strategies which contribute to the campus strategic directions.
- Develop an understanding of the Workcell business strategy as it pertains to Test Engineering.
- Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.
Cost Management:
- Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
- Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.
- Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.
Forecast Development and Accuracy:
- Prepare timely forecasts for the department.
- Compare forward forecast results to historical actual results for trend assessment and analysis.
How will you get here?
- Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
- Drive continuous improvement through trend reporting analysis and metrics management.
- Assess the adequacy of data gathering methods used by the Workcells.
- Assure that procedures and work instructions are efficient and not redundant.
- Offer innovative ideas and suggestions for improvement. Identify and implement new practices and processes.
- Demonstrate commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
- Lead by example.
- Rehabilitate troubled Workcells or to help during product launch. Foster a “back to basics” mentality during these times.
- Establish new measurement systems if/where possible.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
- Ensure 100% adherence to all company policies and procedures (i.e., Health and Safety, Quality).
- Ensure all sensitive and confidential information is managed appropriately.
- Evaluate customer test strategies and recommend proper test solutions to support customer requests.
- Drive the development of specialized test equipment and software.
- Manage the procurement of test equipment.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
- May perform other duties and responsibilities as assigned.
Education:
- Bachelor’s degree in electrical engineering preferred.
- Or a combination of education, experience, and/or training.
Experience:
- Minimum of 7 years’ work-related experience, minimum of 5 years management experience required.
- Ability to read, analyze, interpret, and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.
- Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
- Ability to effectively present information to top management, public groups, and/or boards of directors.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
- Ability to apply concepts of basic algebra and geometry.
- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Proficiency in use of personal computers, Microsoft Office products (Excel, Word, and PowerPoint) and e-mail skills required.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
- As the Test Engineering Manager, you will provide optimum test solutions and strategies through the effective management of people, systems, procedures, and equipment.
- You will drive innovation and continuous improvement within Test Engineering by harnessing innovative technologies in the areas of systems, equipment, and processes.
- As the Test Engineering Manager, you will also provide exceptional support to customers, team members, and shareholders.
What will you do?
Recruitment and Retention:
- Recruit, interview, and hire Assistant Test Engineering Managers.
- Communicate criteria to recruiters for Test Engineer and Test Management position candidates.
- Coach Test Engineering Managers in the interviewing/hiring process.
- Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
- Identify individual and team strengths and development needs on an ongoing basis.
- Create and/or validate training curriculum in area of responsibility.
- Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.
- Create and manage succession plans for Test Engineering and Test Management functions.
Performance Management:
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e., operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
- Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers, and team members on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.
- Express pride in staff and encourage them to feel good about their accomplishments.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of large teams and keep them focused on times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
- Provide communication forum for the exchange of ideas and information with the department.
- Organize verbal and written ideas clearly and use an appropriate business style.
- Ask questions; encourage input from team members.
- Assess communication style of individual team members and adapt own communication style accordingly.
Functional Management Responsibilities:
Business Strategy and Direction:
- Know and understand the campus strategic directions.
- Define, develop, and implement Test Engineering strategies which contribute to the campus strategic directions.
- Develop an understanding of the Workcell business strategy as it pertains to Test Engineering.
- Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.
Cost Management:
- Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
- Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.
- Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.
Forecast Development and Accuracy:
- Prepare timely forecasts for the department.
- Compare forward forecast results to historical actual results for trend assessment and analysis.
How will you get here?
- Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
- Drive continuous improvement through trend reporting analysis and metrics management.
- Assess the adequacy of data gathering methods used by the Workcells.
- Assure that procedures and work instructions are efficient and not redundant.
- Offer innovative ideas and suggestions for improvement. Identify and implement new practices and processes.
- Demonstrate commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
- Lead by example.
- Rehabilitate troubled Workcells or to help during product launch. Foster a “back to basics” mentality during these times.
- Establish new measurement systems if/where possible.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
- Ensure 100% adherence to all company policies and procedures (i.e., Health and Safety, Quality).
- Ensure all sensitive and confidential information is managed appropriately.
- Evaluate customer test strategies and recommend proper test solutions to support customer requests.
- Drive the development of specialized test equipment and software.
- Manage the procurement of test equipment.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
- May perform other duties and responsibilities as assigned.
Education:
- Bachelor’s degree in electrical engineering preferred.
- Or a combination of education, experience, and/or training.
Experience:
- Minimum of 7 years’ work-related experience, minimum of 5 years management experience required.
- Ability to read, analyze, interpret, and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.
- Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
- Ability to effectively present information to top management, public groups, and/or boards of directors.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
- Ability to apply concepts of basic algebra and geometry.
- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Proficiency in use of personal computers, Microsoft Office products (Excel, Word, and PowerPoint) and e-mail skills required.
What Can Jabil Offer You?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.Job Title: Sr.
Specialist, Integration & Test Engineering (Space Optical Systems)Job Code: 33755Job Location: Wilmington, MAJob Schedule: 9/80 (Every other Friday off!)Relocation: Relocation assistance is available to qualified applicantsJob Description: On the L3Harris team, your job is to secure the world.
We don't work here just for the advanced technology and equipment: we work here because we know what
- and who
- we're protecting! From families to the intelligence community, and from our climate to our men and women in uniform
- we're making the world a safer place!L3Harris Space Superiority group has an opening for a Integration & Test Engineer to join our team of qualified, diverse individuals.
This position will be in Wilmington, MA.
The individual will work in a fast-paced environment with significantly diverse assignments and a collaborative team setting.AgileEO specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control.
The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents.
Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts.Essential Functions: System Design and Integration: Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements.Technical Leadership: Provide technical leadership and guidance in systems engineering, including test development, requirements verification and validation (V&V).Testing and Validation: Design, plan, and execute test procedures for electro-optical components and systems.
Analyze test data to validate system performance against requirements.
Identify and troubleshoot issues, propose corrective actions, and implement solutions.Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle.Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation.Documentation and Reporting: Generate and maintain detailed technical documentation, including test plans, procedures, work instructions, test reports, and anomaly reports.Trade Studies: Develop and evaluate trade studies to support decision-making processes, ensuring accuracy and completeness.Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.S.
Government customers, to ensure alignment and project success.Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices.Collaboration: Work closely with cross-functional teams, including engineering, production, and quality assurance, to ensure successful system integration and test.Written and Oral Communication: Demonstrate excellent written, oral, and presentation communication skills.
Prepare effective presentations to communicate technical information to non-technical professionals.Continuous Improvement: Participate in process improvement initiatives to enhance test methodologies and system integration practices.Candidate must be eligible to obtain a DoD security clearance.Qualifications: Bachelor's degree in Engineering, Physics, or other related scientific discipline and 6 years of relevant EO/IR systems engineering work experience.
Alternatively, a graduate degree with a minimum of 4 years of prior related experience, or in lieu of a degree, a minimum of 10 years of prior related experience.3+ years experience working with systems integration and testPrior or current experience working with eletro-optical/imaging systemsPrior or current experience working with space environment considerations and testing protocols3+ years experience with engineering and simulation software tools, such as MATLABPreferred Additional Skills: Active Secret or Top Secret/SCI clearance is highly preferredDemonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission design.
Familiarity with NASA-STD-1540 and/or NASA-STD-7002.Experience in leading technical teams, managing projects, and coordinating cross-functional engineering activities.Proficient in Model-Based Systems Engineering (MBSE) tools such as DOORs, CAMEO, CREO, JIRA, and SysML.Excellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiences.Strong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challenges.Ability to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals.Working knowledge of Microsoft Word, Excel, Visio, PowerPoint, and other relevantIn compliance with pay transparency requirements, the salary range for this role in Massachusetts is $1119,500
- $222,500.
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.
L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.Job Title: Lead, Electro-Optical (EO) Systems EngineerJob Code: 33196Job Location: Wilmington, MAJob Schedule: 9/80 (Every other Friday off!)Relocation: Relocation assistance is available to qualified applicantsJob Description: During its 120-year history, L3Harris has transformed communications and information technology.
L3Harris is a proven leader in tactical communications, geospatial systems and services, air traffic management, environmental solutions, avionics and electronic warfare, and space and intelligence.
From ocean to orbit and everywhere in between, we provide mission-critical solutions to connect, inform and protect the world.On the L3Harris team, your job is to secure the world.
We don't work here just for the advanced technology and equipment: we work here because we know what
- and who
- we're protecting! From families to the intelligence community, and from our climate to our men and women in uniform
- we're making the world a safer place!L3Harris Space Superiority group has an opening for a Lead, Systems Engineer to join our team of qualified, diverse individuals.
This position will be in Wilmington, MA.
The individual will work in a fast-paced environment with high expectations, significantly diverse assignments, and a collaborative team setting.The L3Harris AgileEO Systems Engineering department is seeking a systems engineer to join our team and support one of our newer programs.
AgileEO specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control.
The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents.
Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts.
Essential Functions: Coordinate with program leadership to develop a technical plan and path forward for program execution.System Design and Integration: Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements.Technical Leadership: Provide technical leadership and guidance in the areas of systems engineering, including architecture development, requirements analysis, and verification and validation (V&V).Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle.
Modeling and Simulation: Conduct modeling and simulation activities to predict system performance and behavior under various operational scenarios.Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation.Documentation and Reporting: Generate and maintain detailed technical documentation, including system specifications, design descriptions, test plans, and test reports.Customer Requirements: Translate the voice of the customer into system level requirements and evaluate alternative solutions to establish preliminary system designs.Trade Studies: Develop and evaluate trade studies for accuracy and completeness to support decision-making processes.
Identify and solve problems using logical engineering thought processes.Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.S.
Government customers, to ensure alignment and project success.Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices.Collaboration: Work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals.Training and Mentoring: Provide training and mentorship to junior engineers, fostering their development and growth within the team.Qualifications:Bachelor's degree in Engineering, Physics, or other related scientific discipline and 9 years of relevant space-based EO/IR systems engineering work experience.
A graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, minimum of 13 years of prior related experience.Experience as a Control Account Manager (CAM) and Integrated Product Team Lead (IPTL) is required6+ years experience in electro-optics, including experience with optical design, sensors, detectors, and imaging systems6+ years experience working with engineering and simulation software tools, such as MATLABCandidate must be eligible to obtain a DOD Secret security clearancePreferred Additional Skills: Holds an active Secret or Top Secret/SCI clearanceDemonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission designExperience in leading technical teams, managing projects, and coordinating cross-functional engineering activitiesRelevant professional certifications, such as INCOSE Systems Engineering Professional (SEP) certification, are a plusProficient in Model Based Systems Engineering (MBSE) tools such as DOORs, CAMEO, CREO, JIRA and SysMLExcellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiencesStrong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challengesAbility to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goalsIn compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $127,500.00
- $236,500.00.
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.
L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.Job Title: Lead, Mechanical Engineering
- Thermal AnalystJob Code: 33517Job Location: Wilmington, MAJob Schedule: 9/80 (Every other Friday off!)Relocation: Relocation assistance is available to qualified applicantsJob Description: L3Harris has an opportunity for a highly skilled Thermal Analyst to join our talented engineering organization.
The Thermal Analyst will be a technical leader across multidisciplinary teams of engineers to create the best overall system design including thermal design, analysis, and test of optical systems operating in harsh space and ground environments.
The candidate will possess in-depth understanding of aerospace thermal engineering technology and payload architectures for spacecraft sub-systems and instruments.
These talents are used to direct and oversee teams who specialize in conductive, convective, and radiative analyses, understanding of heat pipes, radiative heat transfer, and thermal control hardware design (thermal blankets, surface treatments, heater tapes, thermistors) and the interaction with optical structures in order to minimize optical errors, and achieve operational temperatures.
The role requires utilizing state of the art custom software in conjunction with Thermal Desktop and Finite Element Analysis (FEA) packages and often mentor other Thermal Analysts in the use of such tools.Essential Functions: System level thermal design & development, payload level integration and test, and risk mitigation for space-based environmentsPerform thermal design and analysis tasks on complex mechanical hardware including precision mechanisms, electro-mechanical devices, aerospace mechanism design, complex electronics packaging, supporting space-based deployable mechanisms, avionics, innovative thermal and ground based systemsCreate and analyze design concepts using thermal analysis software & FEADefines and establishes the technical approach to meet assigned objectiveDirects, coordinates and provides assistance to engineering team in order to meet assigned objectivesProgram support also includes requirements derivation and verification, system architecture development, loads derivation, trade studies, design sensitivity/optimization studies, preliminary and final design analysis, generation of analysis documentation (including presentation materials, and deliverable data packages), and leading system test activitiesOrganization of thermal design and analysis as an IPT lead; frequently interfacing directly with customer technical leads and management.Prepares reports, formal documentation and presentation materials summarizing analysis results and present results to both external and internal groups, including leadership and customersParticipates in and present information for Preliminary Design reviews (PDR), Critical Design Reviews (CDR) and Technical Interchange Meetings (TIM)Interfaces with outside suppliers/customers and other engineering disciplines to drive designs to closure (Structural, Systems Engineering, Electrical, Manufacturing, Performance, Quality, Configuration Management)Presents design details at program reviews to customers and independent reviewersDevelopment of thermal test plans to manufacture and test payload sensor systemsSupport new business opportunitiesMentor junior level engineersQualifications: Bachelor’s Degree in Mechanical Engineering or other related engineering or science degree and minimum 9 years of prior relevant experience.
Graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, minimum of 13 years of prior related experience7+ years of professional experience using thermal analysis tools such as Thermal Desktop (preferred), Sinda, Flotherm, Icepak, etc.4+ years of providing technical leadership to a multi-disciplinary mechanical engineering team through system requirements, design, analysis, test, hardware build, delivery and launchProfessional experience with thermal analysis of mechanical and electronic systems, in space, air or ground environmentsProfessional experience with thermal vacuum testingAbility to obtain and maintain a U.S.
TS/SCI Security ClearancePreferred Additional Skills: Experience with finite element analysis softwareAble to support design decisions with well documented engineering analyses and calculationsAble to analyze problems and to focus and drive down to the root cause of problems quicklyExperience in leading engineering teams from conceptual through detailed design phasesExperience as a lead engineer, project engineer, or IPT lead is a plus.Experience with Microsoft office tools (Word, Excel, PowerPoint, etc.)Active TS/SCI clearanceIn compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $122,000.00
- $227,000.00.
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.
L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.Job Title: Sr.
Specialist, Project Engineering/Management (Space optical systems)Job Code: 33326Job Location: Wilmington, MAWork Schedule: 9/80 (Every other Friday off)Relocation: Relocation assistance is available to qualified applicantsJob Description:L3Harris Space and Mission Systems has a need for an Integrated Product Team Lead (IPTL) and Control Account Manager (CAM) Project Engineer (PE).
This critical position leads the development and delivery of cutting-edge Space-based payloads and sensors for remote sensing, missile warning and track, and space warfighting within technical, cost, and schedule objectives of a project baseline throughout all phases of the program life cycle.
This role is responsible for full lifecycle Project Engineering support for a range of software and hardware development, assembly, and integration and test efforts.The position is critical to our warfighter customer to ensure delivery of crucial space products!Essential Functions: Responsible for successfully leading a project team to meet customer requirements within allocated cost and schedule commitments.Develops, oversees, and coordinates the cost/schedule/technical aspects of an ongoing engineering project within the program guidelines set by the Program Manager and customer.Reviews status of engineering projects and budgets, manages schedules, drives execution, identifies opportunities, and delivers results through achieving payment milestones.Assesses engineering issues and develops resolutions to meet productivity, quality, and customer-satisfaction goals and objectives.Identifies, tracks, mitigates, manages, and dispositions program-level risks and opportunities.Estimate resource and material needs for the project/product.Provides the coordination between resource managers/supervisors and ensures all necessary reviews and approvals are received.Understands how to develop a schedule using Earned Value (EV) and manage a project using the Earned Value Indicators on a DCMA surveilled program (highest rigor applied).Participate in small teams and perform a wide variety of tasks to drive execution (e.g., value stream mapping activities)Must have ability and willingness to work in a collaborative team environment on quick reaction projects and will have regular contact with customers.Must be able to get a program SAP security clearanceQualifications:Bachelor’s Degree and minimum 6 years of prior relevant experience.
Graduate Degree and a minimum of 4 years of prior related experience.
In lieu of a degree, minimum of 10 years of prior related experienceActive Top Secret security clearance requiredPrior or current IPTL/CAM Professional experiencePrior or current experience with project engineering and program executionExperience in managing multi-discipline programs across multiple locationsExperience in managing a team Integrated Product Team Leads (IPTL) and driving labor resources in a matrix organizationExperience with Technical Supplier Management, Risk and Opportunity ManagementPreferred Additional Skills:Experience in space telescope, optical-mechanical development programs is preferredExperience or knowledge of Government contract acquisition lifecycle a plusExperience with management of design to cost activitiesExperience with program pursuit and proposal activitiesExperience with operations and/or manufacturing activitiesExperience in Root Cause Corrective Action process and techniquesExperience managing projects with total budgets of $70M+Experience in software development and integration programsIn compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $106,500 – $197,500.
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.
L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.
The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish.
For information regarding your Right To Work, please click here for English or Spanish.
The Senior Project Manager/Estimator – Industrial Plumbing leads large-scale industrial plumbing projects from concept to completion and manages estimating activities that support project acquisition. This role oversees planning, design, budgeting, scheduling, and execution to ensure compliance with quality, safety, and financial goals. Manage all phases of industrial plumbing projects including installation, retrofits, and upgrades.
Develop and monitor schedules, budgets, and resources while identifying and mitigating risks.
Oversee subcontractors, ensure quality standards, and maintain safety compliance.
Act as the main client contact, managing communication and scope changes.
Mentor and develop project staff, fostering teamwork and accountability.
Bachelor’s degree in Construction Management, Mechanical Engineering, or related field preferred; 7–10 years of industrial plumbing project management experience.
~ Proven success delivering large-scale projects on time and within budget.
~ PMP certification or Master Plumber License preferred.
~ Strong technical knowledge of plumbing systems, estimating software, and construction management tools.
~ Ability to work on-site, including standing, walking, and climbing ladders.
~ Regular travel to job sites and flexibility to meet project deadlines.
Join a fast-growing national contractor offering competitive pay, comprehensive benefits, and opportunities for impact and growth.
Paid Time Off and annual bonuses
~ Phone and vehicle allowance
All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, or veteran status.
Job Title: Software Engineer
Duration: 12 months (Right to Hire)
Location: 100% Remote
Responsibilities:
- Design and build internal tools and automation-including API linting frameworks, OpenAPI specification validators, code?generation utilities, and workflow automation-to improve consistency, quality, and efficiency across the API lifecycle.
- Ensure developer experience is at the center of all software created, building intuitive, reliable, and friction?reducing tools that empower API producers and consumers and simplify their workflows.
- Collaborate, coordinate, and align with technical stakeholders such as architecture, platform engineering, security, and API governance teams to ensure tooling meets enterprise needs and integrates seamlessly with broader technical ecosystems.
- Apply industry best practices to deliver secure, scalable, and maintainable solutions that align with clients engineering, security, and compliance standards.
- Drive development activities from design through delivery, ensuring tools and services are released on time and effectively support both API producers and consumers.
- Champion code quality, implementing comprehensive unit testing, functional testing, and automated validation to ensure highly reliable solutions and fast feedback loops.
- Demonstrate engineering excellence, consistently applying high?quality engineering practices-including clean code principles, strong testing strategies (unit, integration, functional), CI/CD pipeline integration, versioning discipline, and reliable automated deployment strategies-to ensure tooling is robust, maintainable, and production?ready.
- Ensure all software created adheres to strong security principles, including secure coding practices, automated security scanning, vulnerability mitigation, and alignment with enterprise security standards-ensuring tooling is safe by design, safe by default, and safe in production.
- Support the tech lead in evaluating and shaping technical decisions, contributing insights and execution capabilities related to tooling, automation, and developer?experience improvements.
Tools & Technologies:
- Programming & Scripting: Java | Python | JavaScript | TypeScript, Bash / Shell Scripting
- API Design & Management: RESTful APIs, OpenAPI / Swagger (Specification, Validation), API Linting Frameworks, API Governance & Standards Enforcement, API Versioning Strategies
- Automation & Tooling: Code Generation Utilities, Workflow Automation Tools, Internal Developer Tooling, CLI Tools
- Testing & Quality Engineering: Unit Testing | Integration Testing | Functional Testing, Automated Validation Frameworks, Test Automation Tools, Code Quality & Static Analysis Tools
- CI/CD & DevOps: CI/CD Pipelines (GitHub Actions, GitLab CI, Jenkins), Automated Build & Deployment Pipelines, Artifact Repositories, Infrastructure Automation
- Cloud & Platforms: Cloud Platforms (AWS / Azure / GCP), Containerization (Docker), Kubernetes (optional / platform-dependent)
- Security & Compliance: Secure Coding Practices, Automated Security Scanning (SAST / DAST), Vulnerability Management Tools, Dependency Scanning, Compliance & Enterprise Security Standards
- Developer Experience (DX): Developer Tooling & Enablement Platforms, Documentation Automation, API Consumer & Producer Enablement Tools
- Collaboration & Version Control: Git | GitHub | GitLab, Agile / Scrum Methodologies, Issue & Work Tracking Tools (Jira, similar)
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
This opportunity is in Norwood, NC, nestled by Lake Tillery in the North Carolina Piedmont region between the Carolina coast and the Blue Ridge Mountains. Norwood is conveniently located within an hour of major cities like Charlotte, Concord, and more! We are proud of our history of building aircraft tires from start to finish - serving the U.S. Military, general aviation, and commercial airline customers in the U.S. and globally.
THE OPPORTUNITY
This role encompasses all aspects of project management, technical specification, design, analysis, installation management, equipment start-up and manufacturing. Automation/Electrical engineers support the manufacturing processes and equipment in one or several manufacturing facilities by designing, specifying, purchasing and constructing Automated/Electrical systems (hardware and software) and components. This engineer is expected to spend a fair amount of time in hands-on technical activities as well. Interaction with all levels of employees will be expected. This is sometimes accomplished through the management of contract engineering resources.
WHAT YOU WILL DO
This position includes roles as the Lead Electrical Engineer and project manager for our Aviation Tire manufacturing facility, supporting efforts to design, build, install, maintain, and modify our manufacturing equipment.
- Create initial designs, assist to define functional specifications for new machines and systems, develop estimates and budget, assure procurement of parts and systems, monitors electrical equipment fabrication, conduct vendor/contractor management, deliver complete and current technical documentation, and oversee installation and startup of projects that range from simple modifications of existing machinery to large-scale expansion projects.
- Have hands-on involvement with equipment and processes by being available to the operators and maintenance personnel and gaining detailed knowledge of the process.
- Provide technical expertise in the maintenance, modification and installation of equipment and machinery in the tire manufacturing process, including technical assistance for problem solving analysis.
- Participate in all facets of project management including: Economic justification, design, vendors/procurement, installation, start-up, qualification, machine acceptance, training for operations & maintenance, project reviews and technical documentation.
- Provide liaison between facility engineering, central quality, methods and purchasing teams, and equipment suppliers to assure good mutual system requirement understanding.
WHAT YOU WILL BRING
Bachelor's degree in electrical engineering along with demonstrated successful project management experience. Associates degree with extensive experience may be considered.
Proven electrical design skills, and the ability to deal with electrical, electronic and mechanical tire manufacturing equipment.
Minimum of 5 years industrial electrical design experience, preferably in manufacturing/industrial equipment.
Excellent interpersonal and leadership skills. Demonstrated ability to set and achieve goals with minimum supervision. The applicant must be able to develop positive relationships with customers.
Well organized and able to manage multiple tasks simultaneously. Demonstrated solid teamwork, communication, and planning skills required. Previous project management experience or team leadership experience is preferred.
Strong communication skills with the ability to influence and resolve issues. Both written and verbal communication skills are essential. Ability to communicate with French counterparts on technical issues is preferred.
Maintain a high degree of confidentiality in dealing with outside contractors and equipment suppliers.
Experience with AutoCAD electrical latest version and PLC programming (i.e. Allen-Bradley) is required. Robot (Yaskawa), vision system (Keyence or Cognex), and Measurement (laser profilometer) experience is a plus.
Proficient in Microsoft Office applications (Excel, Word, Project, and PowerPoint).
#LI-RM1
#LI-HIRINGMICHELIN
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
- Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
- Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
- Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
- Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
Michelin has immediate openings for an National Account Fleet (NAFA) Customer Account Specialist (CAS) who will be responsible for enhancing customer excellence in the Order to Cash (O2C) department. This role involves streamlining processes and addressing inefficiencies across teams.
Michelin's purpose is to support everyone's right to move freely and find their better way forward. In this role, you will contribute to our mission by leading continuous improvement initiatives for the customer, championing customer excellence, and developing team-building skills to enhance overall departmental efficiency and effectiveness. By joining us, you will have the opportunity to impact our operations and significantly drive our mission forward. If you value respect for people, teamwork, and trust, consider joining us as the worldwide leader in tires!
What will you do
- Develop and maintain procedures and documentation to drive critical business results.
- Streamline processes to enhance operational excellence across teams
- Manage NAFA orders and deliveries according to the sales policies defined by customer accounts.
- Collaboration with team members and resolving business partner issues.
- Act as a liaison to promptly resolve issues with key business partners.
- Identify improvement opportunities and develop solutions for implementation.
- Generate and send customer invoices (manual or systemgenerated).
- Monitor aging reports to identify overdue accounts.
- Send reminders, pastdue notices, and statements to customers.
- Contact customers (email/phone) to resolve unpaid invoices.
- Escalate chronic overdue accounts when necessary.
What will you bring
- A 2-4-year college degree or equivalent experience.
- 1-5 years of experience using Salesforce and SAP.
- Previous experience in customer service, accounts receivable, supply chain, or logistics is a plus.
- Experience in process improvement and operational excellence is preferred.
- Strong communication skills for effective collaboration and problem-solving.
- Adaptability and flexibility in a dynamic environment.
Join Us!
If you're looking for a dynamic work environment where you can make a difference, we encourage you to explore how your strengths can support our mission and grow your career with us. Apply today and become part of a team that values curiosity, collaboration, and continuous improvement.
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.
Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
THE OPPORTUNITY
Michelin has openings for Summer 2026 Internships in Chemical, Mechanical, Industrial, Occupational Health and Safety, and Human Resources. This opportunity is located at our Norwood, NC site. Michelin's purpose is to support everyone's right to move freely to find their better way forward. If respect for people, teamwork and trust are some values you live by you should consider joining us, the Worldwide leader in Tires!
Michelin, the leading mobility company, is working with tires, around tires and beyond tires to enable Motion for Life. Dedicated to enhancing its clients' mobility and sustainability, Michelin designs and distributes the most suitable tires, services and solutions for its customers' needs. Michelin provides digital services, maps and guides to help enrich trips and travels and make them unique experiences. Bringing its expertise to new markets, the company is investing in high-technology materials, 3D printing and hydrogen, to serve a wide variety of industries - from aerospace to biotech.
Norwood, North Carolina is the perfect place to start your career while enjoying life outside of work. Set on Lake Tillery and close to the National Forest, it's a great spot for boating, hiking, and weekend adventures. With affordable living, a friendly community, and easy access to Charlotte's nightlife and opportunities, Norwood combines small-town comfort with big-city convenience. For young professionals joining Michelin, it's a place to grow your career and enjoy an active lifestyle.
Get in the driver's seat and be on your way to a meaningful professional journey!
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
- Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
- Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
- Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
- Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
- Tutor (name, surname)
- Missions and objectives
- Level of studies
- Required Skills
- Start month
- Working hours
KEY EXPECTED ACHIEVEMENTS - NOT APPLICABLE
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.
Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
MES (PAS-X) Lead Engineer (Biotech/Pharmaceutical)
Location – Wilson, NC
Aztec Technologies is an engineering and consulting firm providing expertise in the
pharmaceutical and biotechnology industries. Aztec Technologies and Aztec Process Automation
are part of Trinity Consultants Company.
Trinity Consultants, Inc., a leading international EHS, life sciences and environment consulting
services with 1500+ engineers worldwide.
Aztec Technologies provides solutions for Manufacturing Applications:
• Process and Facility Automation
• Project Management
• MES
• Data Analytics
With offices across 3 continents, consulting firm with over 20 years of experience within the
biopharmaceutical and pharmaceuticals industries.
The successful candidate will work with a group of engineers involved in the design, automation,
commissioning and start-up of various processes, systems, and facilities. A combination of
strong technical aptitude, automation engineering skills and technical writing are the desired skill
set. This is an outstanding opportunity to join our growing team and to work in the Life Sciences
space that will enhance professional opportunities!
Candidates need to be local or willing to relocate to the areas of operation where we have open
opportunities for immediate hire in the Wilson, NC area:
Key Responsibilities:
- Own MES configuration management for PAS-X, including:
- Manufacturing Batch Records (MBRs)
- Material management
- Equipment and timer management
- Label management
- Lead MES design, configuration, testing, and troubleshooting
- Act as technical interface between MES, DCS (DeltaV), ERP, LIMS, and other shop-floor systems
- Support MBR migration from a legacy site
- Ensure alignment with site and global MES standards
- Support risk assessments and GMP compliance activities
- Provide hands-on troubleshooting and technical support during execution
- Develop and maintain MES technical documentation
- Collaborate closely with IT, Manufacturing, Quality, and Engineering teams
Required Qualifications
- 8+ years experience in pharmaceutical or biopharmaceutical manufacturing environments
- Strong hands-on experience with MES platforms, preferably Werum PAS-X
- Proven experience with MBR design and execution
- Solid understanding of GMP manufacturing processes
- Experience integrating MES with DCS (DeltaV) and enterprise systems
- Strong analytical, troubleshooting, and problem-solving skills
- Bachelor’s degree in Engineering, IT, Science, or related discipline
Preferred / Nice-to-Have Skills
- Programming experience: .NET, SQL / PL-SQL, Java
- Experience with OPC servers/clients
- Knowledge of 21 CFR Part 11 and EU GMP Annex 11
- Process knowledge across:
- Upstream
- Downstream
- Bioprocess support functions
- Ability to communicate effectively with both technical and non-technical stakeholders
Ideal Candidate Profile:
- Senior-level PAS-X MES SME
- Strong on-site presence and ownership mindset
- Comfortable operating as Owner’s Rep, not a junior configurator
- Deep pharma/biotech automation background
- Able to bridge Manufacturing, IT, Automation, and Quality
