Engineering Jobs in Maybrook Ny Orange County, NY
6 positions found
PilotCBP Air Interdiction Agent
NEW RECRUITMENT AND RETENTION INCENTIVES!
Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.
If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!
DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!
Duty Locations
Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:
Southeast Region:Homestead, FL and CAMB:Aguadilla, PR
Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX
NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX
Duties and Responsibilities
As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:
- Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
- Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
- Collecting, refining, and analyzing strategic and tactical intelligence.
- Supporting search and rescue and humanitarian efforts.
Salary and Benefits
Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).
Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)
Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.
This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).
Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).
- GS-11, 1st year annual pay - $106,588
- GS-12, 2nd year annual pay - $127,754
- GS-13, 3rd year annual pay - $151,918
Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).
- GS-11, 1st year annual pay - $115,115
- GS-12, 2nd year annual pay - $137,974
- GS-13, 3rd year annual pay - $164,071
Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).
- GS-11, 1st year annual pay - $127,906
- GS-12, 2nd year annual pay - $153,305
- GS-13, 3rd year annual pay - $182,302
Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.
- RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)
- RI: Retention Incentive (25% for Key West, FL)
RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)
Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications
Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:
- Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
- Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
- Developing strategies and coordinating aircraft and ground assets.
- Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
- Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.
Hiring Minimums:
Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:
- Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
- Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
- Helicopter Rated: Rotorcraft Helicopter with instrument rating.
- Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).
Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.
250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.
FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.
Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)
UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.
NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.
Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply
There Are Three Ways to Apply to Become an Air Interdiction Agent:
- Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR
- Apply onUSAJOBS;OR
- Apply onAirline Apps.
Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
RequiredPreferredJob Industries- Government & Military
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
THE POSITION IN A NUTSHELL
Sciens Building Solutions is seeking an experienced Fire Alarm Technician with programming, commissioning, and troubleshooting capabilities and experience. This position will work closely with our sales team, field project teams, and clients to ensure a sound design, and seamless installation and commissioning of our fire alarm solutions. This is a key position for our growing team and requires attention to detail in all aspects of executing projects. Customer and employee interface requires a high degree of effective human relations. Communication skills, both verbal and written, are important elements of the position.
WHAT YOU’LL BE DOING (and doing well!)
- Responsible for reviewing system layouts and coordinating with engineering, project management, and sales departments for successful project execution.
- Produce field surveys and daily project logs of activity.
- Program and commission complex fire alarm systems leading to final acceptance by customers and Authorities Having Jurisdiction (AHJs).
- Produce detailed commissioning and inspection reports in accordance with NFPA.
- Responsible for complex troubleshooting and effective resolution.
- Deliver projects on schedule and within cost budgets.
- Program systems via laptop computers.
- Assist in the oversight of project inventory and responsible for vehicle inventory.
- Provide support, guidance, and expertise to the other technicians.
- Assist in managing job scheduling and job progress in an efficient and cost-effective manner, with a strong focus on quality.
- Demonstrate proper operation of equipment and control units to customers and explain proper use and how to respond to any system signals.
- Comply with industry standard procedures and Sciens safety programs/policies.
WHAT WE LIKE ABOUT YOU
- High school diploma or equivalent.
- Two to five (2-5) years of experience in a technician role within the fire-life safety industry.
- Siemens and/or EST 3-4 experience
- Ability to program and commission mid-range fire alarm systems independently.
- Ability to terminate fire alarm control units and field equipment with minimal supervision.
- Ability to communicate and coordinate with onsite contractors.
- Intermediate understanding of fire alarm circuit integrity and how to troubleshoot for circuit opens, shorts, or ground conditions.
- Intermediate computer knowledge related to the use and installation of software.
- Ability to demonstrate proper operation of equipment and control units.
- Intermediate knowledge of NFPA 72 code requirements for the installation of a fire alarm system.
- Intermediate knowledge of Section 907 of the International Fire Code or state-adopted fire code.
- Intermediate knowledge of Section 909 of the International Building Code or state-adopted building code.
- Intermediate knowledge of Article 760 of NFPA 70 (electrical code) for the installation of fire systems and circuiting.
- State, local, contract, and/or product specific certifications determined by the business.
- NICET I certification
- Knowledge of state fire procedures, filing, and requirements.
- Ability to read fire system design drawings.
- Ability to work under tight deadlines and with a sense of urgency.
- Ability to work independently with some supervision.
- Knowledge of OSHA safety standards and able to obtain OSHA 10 certification.
- Proficient in issue resolution.
- Excellent organizational, decision-making, and communication skills.
- Be physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for most of the workday.
- Ability to travel occasionally overnight, as needed.
- Valid driver’s license & reliable transportation.
- Fire alarm experience preferred.
WHAT WE’RE BRINGING TO THE TABLE
- Competitive salary based on qualifications.
- Paid time off plan and holidays.
- 401(k) matching.
- Short term and long-term disability.
- Medical, dental, and vision plans with options.
- Life insurance.
- Company cell phone, laptop, and vehicle.
- Professional career development opportunities.
- Tuition reimbursement.
$21.63 - $31.25/hour
Salary: $90,000
- $120,000 per year A bit about us: Our client is a major player in the corrugated packaging industry, operating one of the most sophisticated and high-volume facilities in the United States.
With a reputation for innovation, sustainability, and long-term client partnerships, the company continues to invest in people, process, and technology to stay ahead in a competitive market.
Their Middletown, NY site is a cornerstone of their U.S.
operations Why join us? Lead quality in one of the largest corrugated manufacturing plants in the country High visibility role with direct impact on customer satisfaction and plant performance Collaborate cross-functionally with operations, engineering, and executive teams Competitive compensation, strong benefits, and long-term career advancement Company-wide commitment to Lean, safety, and continuous improvement Stable, privately held company reinvesting in domestic manufacturing and green initiatives Job Details Our client is seeking a proactive and hands-on Quality Manager to oversee all quality assurance and quality control functions at their Middletown, NY corrugated manufacturing facility.
The ideal candidate will bring deep experience in corrugated packaging, strong leadership capabilities, and a continuous improvement mindset.
Key Responsibilities: Own the Quality Management System (QMS) for the plant, ensuring compliance with internal and customer-specific standards Lead a team of quality technicians and oversee daily quality control operations across all production shifts Manage non-conformance reporting, root cause analysis, and corrective/preventive action (CAPA) processes Interface directly with key customers to resolve quality concerns and ensure long-term satisfaction Drive continuous improvement initiatives in product quality, waste reduction, and line efficiency Lead audits (internal and external) and maintain documentation and reporting for regulatory and customer requirements Collaborate with operations, maintenance, and engineering to drive process improvements and defect prevention Top Skills & Experience Required Corrugated packaging or converting experience – required 5+ years in a quality leadership role within a manufacturing environment Strong understanding of QMS, CAPA, SPC, and ISO or customer-driven standards Demonstrated success leading and developing quality teams Proficient in quality tools (Pareto, 5 Why, FMEA, Control Plans) Excellent communication skills and a customer-focused mindset Bachelor’s degree in Engineering, Quality, or related field preferred but not required Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
What’s the Job? Ready to move your career forward? As a Technician at Penske, you’ll do exactly that.
Here, you’ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry.
You will help our customers keep their vehicles in shape and on the road.
As a Technician II at Penske, you are a respected technician.
You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks.
You set an example and informally mentor new technicians while continuing to grow your skills from learn from other experienced techs and your manager.
Why is this job awesome? For starters, your skills and experience are recognized.
You’ll get to work on lots of different types of equipment—not just one manufacturer.
We work hard to get the job done, but we also make sure you have the time you need to do the job right.
Safety and reliability are our top priorities.
Yes, we know you have technician experience under your belt, and we’ll leverage that.
But we’ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use.
And we will make sure you are continuing to get the training you need to advance in your career.
You’ll be inspired and encouraged by the best in the industry.
We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools.
If you are an experienced vehicle technician and are interested in a stable career with a lot of opportunity for growth, join our team.
Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner • Repairing and troubleshooting components such as, engines, transmissions and differentials, turbochargers, fuel system components, etc.
• Keeping your work area clean and safe • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Learning new skills through Penske’s technician training • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary: $32.00/hr.
• Shift Premiums: $3.00 (2nd shift), $.00 (3rd shift) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off: Benefits
- Penske ( ) • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • 3 years of practical experience with vehicle maintenance required • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred) • Experienced using tools of the trade (including diagnostic equipment, hand tools, and power tools) • Valid driver’s license required • The ability to solve problems • Excellent customer service skills and communication skills • The ability to work well as part of a team • Willing to work in non-climate-controlled conditions • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.
• Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role.
The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years.
Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.
• Willingness to travel as necessary within the district (customers’ yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening.
This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required.
Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.
Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period.
• The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls.
• The associate must be able to work safely at heights using applicable ladders and elevated working platforms.
• The associate must be able to safely work in all weather conditions.
• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.
• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds.
Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
Visit Go Penske to learn more.
Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 1 Elizabeth Dr Primary Location: US-NY-Chester Employer: Penske Truck Leasing Co., L.P.
Req ID: 2601910
Job Description Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Ability to certify on all industrial lift equipment.
Pickers, Reaches, Skates, Booms, Scissor lifts, etc.
Oversee projects as assigned.
Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.
Oversee, inspect, and monitor the routine maintenance provided by junior engineers.
Will also provide guidance and training as needed.
Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to learn new equipment as it is brought on-line.
Physical activities necessary to perform one or more essential functions of the position.
Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $33.25
- $48.25 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
