Engineering Jobs in Maiden Nc Flexible
204 positions found
M
Maintenance Tech II
✦ New
Salary not disclosed
Job Summary Under minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.
Job Description Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Ability to certify on all industrial lift equipment.
Pickers, Reaches, Skates, Booms, Scissor lifts, etc.
Oversee projects as assigned.
Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.
Oversee, inspect, and monitor the routine maintenance provided by junior engineers.
Will also provide guidance and training as needed.
Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to learn new equipment as it is brought on-line.
Physical activities necessary to perform one or more essential functions of the position.
Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $30.00
- $43.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Job Description Responsibilities: Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed.
Record all maintenance issues in maintenance log for each line.
Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.
Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.
Assist maintenance mechanics in work that requires two people or when operational needs demand.
Perform facility/building project work as assigned.
Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.
Assemble and test equipment to verify correct operation and production.
Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions.
Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.
Ability to certify on all industrial lift equipment.
Pickers, Reaches, Skates, Booms, Scissor lifts, etc.
Oversee projects as assigned.
Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.
Oversee, inspect, and monitor the routine maintenance provided by junior engineers.
Will also provide guidance and training as needed.
Required Experience: Education High school diploma or equivalent Work Experience 5 years of experience with conveyor, automation, or robotics equipment repair and maintenance Preferred Qualifications: Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.
Graduate of an apprenticeship program or hold current trade certification.
Fundamental understanding of machinery/equipment Basic skill level in multiple computer software packages including Microsoft Excel Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems
- Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).
Must be willing to learn new equipment as it is brought on-line.
Physical activities necessary to perform one or more essential functions of the position.
Ability to bend, twist, reach, push, lift for extended periods daily Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head Willing to operate material handling equipment (i.e.
fork truck).
- Write documents and reports using writing instruments and computers Read information, often in small print (drawings)
- Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc.
and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards Ability to work overtime and must be available for on-call requests as needed Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $30.00
- $43.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Not Specified
D
Mechanical Engineer (Manufacturing / Equipment)
✦ New
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Marshelin at (224) 507-1280 Title: Mechanical Engineer (Manufacturing / Equipment) Duration: 12 Months Location: On-site in Newton, NC Travel Requirements: Expected to be on-site in the plant during the week Travel to a supplier or vendor may be required for equipment check-out before shipment Work Schedule: Typical 40 hours per week.
May require working weekends/holidays or longer days to support installation schedule Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description Comments: 1) Candidates local to the NC region are preferred but Client is willing to consider candidates outside the local region who are willing to relocate at their own expense.
2) Candidates must be eligible to work in the US for at least 18 months.
Top skills: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment.
Candidate must have 5 years demonstrated leadership experience with coordinating scheduling, workflows, etc..
Managing mechanical and electrical trades (both internal and external) executing equipment install and debug.
Skilled with use of design software (AutoCAD, Solidworks, Inventor) Scope of Position: A mechanical engineer responsible for leading and providing hands-on mechanical support for the installation, start-up and debug of high-cable manufacturing process equipment.
This includes working with a multi-functional team (mechanical, electrical, controls, facilities, IT, operations, etc.) Involves the application of mechanical principles encompassed in mechanics, hydraulics, thermodynamics, metallurgy, and machine design used for the design, production, operation, and use machinery of all types.
Requirements: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment Managing mechanical and electrical trades executing equipment install and debug.
Skilled with use of design software (AutoCAD, SolidWorks, or Inventor) Knowledge of machine guarding and safety practices and standards (OSHA, ANSI, ASME, etc) OSHA 30 Certification desired Good written and oral communication skills Ability to collaborate and work with diverse teams (skills, gender, culture, race, etc.) Capable of multitasking Ability to work with minimal direction Independently determines and develops approaches to solutions Familiarity with other engineering disciplines (electrical, civil, process, etc.) Key Responsibilities Coordinating the task and workplan for team members to meet customer schedule Providing hands on input and insight into equipment installation and troubleshooting Support start-up and qualification of equipment Verifying equipment build and layout against drawings Coordinating installation plan with safety and plant receivers Conferring with Client engineers and vendors to resolve equipment install or build discrepancies Ensure safe work practices Updating drawings and equipment documentation Education: BS in Mechanical Engineering, Mechatronics, Mechanical Technology Minimum Experience: 5 Years Interview process: Initial teams meeting with manager, then onsite interview if local.
If not local, interview will be by teams.
Local candidates are strongly preferred.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Manufacturing, Solidworks, Inventor, AutoCad, multitasking
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Marshelin at (224) 507-1280 Title: Mechanical Engineer (Manufacturing / Equipment) Duration: 12 Months Location: On-site in Newton, NC Travel Requirements: Expected to be on-site in the plant during the week Travel to a supplier or vendor may be required for equipment check-out before shipment Work Schedule: Typical 40 hours per week.
May require working weekends/holidays or longer days to support installation schedule Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description Comments: 1) Candidates local to the NC region are preferred but Client is willing to consider candidates outside the local region who are willing to relocate at their own expense.
2) Candidates must be eligible to work in the US for at least 18 months.
Top skills: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment.
Candidate must have 5 years demonstrated leadership experience with coordinating scheduling, workflows, etc..
Managing mechanical and electrical trades (both internal and external) executing equipment install and debug.
Skilled with use of design software (AutoCAD, Solidworks, Inventor) Scope of Position: A mechanical engineer responsible for leading and providing hands-on mechanical support for the installation, start-up and debug of high-cable manufacturing process equipment.
This includes working with a multi-functional team (mechanical, electrical, controls, facilities, IT, operations, etc.) Involves the application of mechanical principles encompassed in mechanics, hydraulics, thermodynamics, metallurgy, and machine design used for the design, production, operation, and use machinery of all types.
Requirements: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment Managing mechanical and electrical trades executing equipment install and debug.
Skilled with use of design software (AutoCAD, SolidWorks, or Inventor) Knowledge of machine guarding and safety practices and standards (OSHA, ANSI, ASME, etc) OSHA 30 Certification desired Good written and oral communication skills Ability to collaborate and work with diverse teams (skills, gender, culture, race, etc.) Capable of multitasking Ability to work with minimal direction Independently determines and develops approaches to solutions Familiarity with other engineering disciplines (electrical, civil, process, etc.) Key Responsibilities Coordinating the task and workplan for team members to meet customer schedule Providing hands on input and insight into equipment installation and troubleshooting Support start-up and qualification of equipment Verifying equipment build and layout against drawings Coordinating installation plan with safety and plant receivers Conferring with Client engineers and vendors to resolve equipment install or build discrepancies Ensure safe work practices Updating drawings and equipment documentation Education: BS in Mechanical Engineering, Mechatronics, Mechanical Technology Minimum Experience: 5 Years Interview process: Initial teams meeting with manager, then onsite interview if local.
If not local, interview will be by teams.
Local candidates are strongly preferred.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Manufacturing, Solidworks, Inventor, AutoCad, multitasking
Not Specified
D
Equipment Installation Mechanical Technician IV
✦ New 🏢 DivIHN Integration Inc
Salary not disclosed
Title: Equipment Installation Mechanical Technician IV - 3 Openings
Location: Newton, NC
Duration: 12 Months
Hours: Monday - Friday 8 AM - 5 PM, Occasional OT
Travel Requirements: Project locations will range from Newton, NC and Hickory, NC
Only W2 candidates are eligible for this position. Third-party or C2C candidates will not be considered.
Scope of Position:
The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations. This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements. The Lead Technician serves as a subject matter expert and mentor to junior technicians.
• This position is in the Engineering Project and is focused on capacity additions and the associated line installations & debug from a mechanical perspective.
• Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.
• As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.
• Leverage knowledge of mechanical and electrical engineering, machining & designing processes to improve performance of equipment/manufacturing process.
• Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations
• Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.
• Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals
•Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.
•Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.
•Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.
•Verify installations meet OEM specifications, safety codes, and quality standards.
Leadership & Coordination
• Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.
• Assign tasks, monitor progress, and ensure efficient use of labor and resources.
• Mentor and train junior technicians, providing hands-on guidance and technical instruction.
• Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.
Quality & Documentation
• Conduct inspections and quality checks throughout the installation process.
• Complete installation reports, checklists, punch lists, and as-built documentation.
• Support equipment testing, startup, and customer acceptance activities.
Project Support
• Assist with installation planning, sequencing, and scheduling.
• Coordinate material handling, tools, and equipment needed for installations.
• Support continuous improvement initiatives and best practices in installation methods.
Day-to-Day Responsibilities:
• Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.
• Manage and lead installation and debugging activities to meet milestone & timeline objectives for successful capacity adds.
• Design & implement mechanical solutions and process changes to improve capability of manufacturing equipment.
• Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts
• Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.
• Develop and update engineering and operations documentation.
• Support training for the operations workforce regarding equipment or operations changes
• Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).
• Align, test, and calibrate mechanical systems after installation.
• Diagnose complex mechanical failures and recommend effective solutions.
• Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.
• Identify opportunities to improve equipment reliability, efficiency, and safety.
• Collaborate with other departments to implement process improvements.
Qualifications
Required Education:
• Associate's degree
• A high school degree will be considered with significant hands-on experience
Required Years and Area of Experience:
• 3+ years’ experience in new equipment installations in a manufacturing environment, start-up experiences a plus
• Experience in a fast-paced, changing environment with multiple priorities
• Strong knowledge of mechanical systems, industrial equipment, and installation techniques.
• Proven ability to read and interpret engineering drawings and technical documentation.
• Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.
Required Skills:
• Ability to learn new technology and processes quickly
• Strong technical fundamentals with mechanical engineering skills
• Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.
• Proficient with PC software, including Microsoft Office Suite
• Strong communication skills
• Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.
• Ability to read and interpret technical drawings, blueprints, and schematics.
• Proficiency in using hand tools, power tools, and diagnostic equipment.
• Strong problem-solving, analytical, and critical-thinking skills.
• Knowledge of safety regulations and practices in an industrial setting.
• Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).
Certifications:
• Mechatronics trades highly desired
• Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.
• OSHA or other safety certifications may be required.
Desired Skills:
• Hands-on experience in commercial manufacturing equipment
• Project leadership/management experience (including milestone management and financial ownership)
• Experience in vendor/supplier management on-site/off-site
• Experience with CAD
• SAP, Maximo, Maintenance Leadership
• Detail-oriented and able to perform with limited supervision.
Soft Skills:
• Leadership experience in technical project management
• Ability to work & effectively collaborate within a team
• Ability to allocate/supervise resources to accomplish aggressive project milestones & timeline within specification and costs.
• Able to shift tasks quickly
• Able to prioritize and multitask
• Communicate effectively both verbal and written
Hours of work/work schedule/flex-time:
• 40 hrs. (overtime expected). Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.
Not Specified
D
Project Administrator/Assistant
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Arun Kumar at (224) 507-1264 or Tenish at (224) 507-1292 Title: Project Administrator/Assistant Duration: 12 Months Location: Newton, NC Working Conditions On site, office-based Light travel may be required May require occasional overtime to meet project deadlines Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Department: Project Management / Operations Reports To: Project Manager / Program Manager Job Summary The Project Administrator/Assistant provides administrative and coordination support to project teams to ensure projects are well resourced, delivered on time, within scope, and within budget.
This role assists with documentation, interviewing and onboarding of hired resources, scheduling, communication, and reporting across all phases of the project lifecycle.
Key Responsibilities Provide administrative support to Project Managers and project teams Support internal departments with administrative tasks Assist in project scheduling, resource coordination, scheduling meetings and interviews, and task tracking Schedule meetings, appointments, and manage calendars Assist with interview schedule arrangements and communications with internal recruiting agents Assist with data entry, record-keeping, and database management Coordinate project meetings, prepare agendas, take minutes, and track action items Prepare and maintain project documentation and presentations, including plans, schedules, reports, and contracts Monitor project timelines and highlight potential risks or delays Communicate project updates to stakeholders as required Support compliance with company policies, procedures, and project standards Assist with procurement processes and vendor coordination Support budget tracking, invoicing, and expense reporting Maintain project filing systems and ensure document version control Handle confidential information with professionalism Perform other administrative duties as assigned Required Skills and Qualifications Diploma or Bachelor's degree in Business Administration, Project Management, Behavioral Psychology, or a related field Proven experience in an administrative or project support role Strong organizational and time-management skills Excellent written and verbal communication skills Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook) Familiarity with project management tools (e.g., MS Project, Asana, Jira, or similar) Proven experience in an administrative or office support role Strong organizational and multitasking abilities Excellent written and verbal communication skills High attention to detail and accuracy Ability to work independently and as part of a team Dynamic Collaboration Office Administrator Conflict Resolution Effective Time management Interpersonal skills Preferred Qualifications Familiarity with basic accounting or HR support tasks Customer service experience Certification in Project Management (e.g., PMP, PMC, CAPM, , PRINCE2 Foundation) Experience working in engineering or corporate project environments Experience using office management software and databases Knowledge of basic budgeting and financial tracking Key Competencies Organization and planning Problem-solving Team collaboration Adaptability Confidentiality and professionalism Time management Professionalism and discretion Reliability Adaptability About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
MS Project, JIRA, Microsoft Office, Time management, Communication skills, problem-solving
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Arun Kumar at (224) 507-1264 or Tenish at (224) 507-1292 Title: Project Administrator/Assistant Duration: 12 Months Location: Newton, NC Working Conditions On site, office-based Light travel may be required May require occasional overtime to meet project deadlines Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Department: Project Management / Operations Reports To: Project Manager / Program Manager Job Summary The Project Administrator/Assistant provides administrative and coordination support to project teams to ensure projects are well resourced, delivered on time, within scope, and within budget.
This role assists with documentation, interviewing and onboarding of hired resources, scheduling, communication, and reporting across all phases of the project lifecycle.
Key Responsibilities Provide administrative support to Project Managers and project teams Support internal departments with administrative tasks Assist in project scheduling, resource coordination, scheduling meetings and interviews, and task tracking Schedule meetings, appointments, and manage calendars Assist with interview schedule arrangements and communications with internal recruiting agents Assist with data entry, record-keeping, and database management Coordinate project meetings, prepare agendas, take minutes, and track action items Prepare and maintain project documentation and presentations, including plans, schedules, reports, and contracts Monitor project timelines and highlight potential risks or delays Communicate project updates to stakeholders as required Support compliance with company policies, procedures, and project standards Assist with procurement processes and vendor coordination Support budget tracking, invoicing, and expense reporting Maintain project filing systems and ensure document version control Handle confidential information with professionalism Perform other administrative duties as assigned Required Skills and Qualifications Diploma or Bachelor's degree in Business Administration, Project Management, Behavioral Psychology, or a related field Proven experience in an administrative or project support role Strong organizational and time-management skills Excellent written and verbal communication skills Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook) Familiarity with project management tools (e.g., MS Project, Asana, Jira, or similar) Proven experience in an administrative or office support role Strong organizational and multitasking abilities Excellent written and verbal communication skills High attention to detail and accuracy Ability to work independently and as part of a team Dynamic Collaboration Office Administrator Conflict Resolution Effective Time management Interpersonal skills Preferred Qualifications Familiarity with basic accounting or HR support tasks Customer service experience Certification in Project Management (e.g., PMP, PMC, CAPM, , PRINCE2 Foundation) Experience working in engineering or corporate project environments Experience using office management software and databases Knowledge of basic budgeting and financial tracking Key Competencies Organization and planning Problem-solving Team collaboration Adaptability Confidentiality and professionalism Time management Professionalism and discretion Reliability Adaptability About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
MS Project, JIRA, Microsoft Office, Time management, Communication skills, problem-solving
Not Specified
D
Equipment Installation Mechanical Technician IV - 3 Openings
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hari, at (224) 507-1278 Title: Equipment Installation Mechanical Technician IV
- 3 Openings Location: Newton, NC Duration: 12 Months Hours: Monday
- Friday 8 AM
- 5 PM, Occasional OT Travel Requirements: Project locations will range from Newton, NC and Hickory, NC Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Scope of Position: The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations.
This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements.
The Lead Technician serves as a subject matter expert and mentor to junior technicians.
This position is in the Engineering Project and is focused on capacity additions and the associated line installations and debug from a mechanical perspective.
Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.
As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.
Leverage knowledge of mechanical and electrical engineering, machining and designing processes to improve performance of equipment/manufacturing process.
Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.
Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.
Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.
Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.
Verify installations meet OEM specifications, safety codes, and quality standards.
Leadership and Coordination Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.
Assign tasks, monitor progress, and ensure efficient use of labor and resources.
Mentor and train junior technicians, providing hands-on guidance and technical instruction.
Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.
Quality and Documentation Conduct inspections and quality checks throughout the installation process.
Complete installation reports, checklists, punch lists, and as-built documentation.
Support equipment testing, startup, and customer acceptance activities.
Project Support Assist with installation planning, sequencing, and scheduling.
Coordinate material handling, tools, and equipment needed for installations.
Support continuous improvement initiatives and best practices in installation methods.
Day-to-Day Responsibilities: Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.
Manage and lead installation and debugging activities to meet milestone and timeline objectives for successful capacity adds.
Design and implement mechanical solutions and process changes to improve capability of manufacturing equipment.
Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.
Develop and update engineering and operations documentation.
Support training for the operations workforce regarding equipment or operations changes Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).
Align, test, and calibrate mechanical systems after installation.
Diagnose complex mechanical failures and recommend effective solutions.
Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.
Identify opportunities to improve equipment reliability, efficiency, and safety.
Collaborate with other departments to implement process improvements.
Qualifications Required Education: Associate's degree A high school degree will be considered with significant hands-on experience Required Years and Area of Experience: 3 years' experience in new equipment installations in a manufacturing environment, start-up experiences a plus Experience in a fast-paced, changing environment with multiple priorities Strong knowledge of mechanical systems, industrial equipment, and installation techniques.
Proven ability to read and interpret engineering drawings and technical documentation.
Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.
Required Skills: Ability to learn new technology and processes quickly Strong technical fundamentals with mechanical engineering skills Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.
Proficient with PC software, including Microsoft Office Suite Strong communication skills Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.
Ability to read and interpret technical drawings, blueprints, and schematics.
Proficiency in using hand tools, power tools, and diagnostic equipment.
Strong problem-solving, analytical, and critical-thinking skills.
Knowledge of safety regulations and practices in an industrial setting.
Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).
Certifications: Mechatronics trades highly desired Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.
OSHA or other safety certifications may be required.
Desired Skills: Hands-on experience in commercial manufacturing equipment Project leadership/management experience (including milestone management and financial ownership) Experience in vendor/supplier management on-site/off-site Experience with CAD SAP, Maximo, Maintenance Leadership Detail-oriented and able to perform with limited supervision.
Soft Skills: Leadership experience in technical project management Ability to work and effectively collaborate within a team Ability to allocate/supervise resources to accomplish aggressive project milestones and timeline within specification and costs.
Able to shift tasks quickly Able to prioritize and multitask Communicate effectively both verbal and written Hours of work/work schedule/flex-time: 40 hrs.
(overtime expected).
Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
CAD
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Hari, at (224) 507-1278 Title: Equipment Installation Mechanical Technician IV
- 3 Openings Location: Newton, NC Duration: 12 Months Hours: Monday
- Friday 8 AM
- 5 PM, Occasional OT Travel Requirements: Project locations will range from Newton, NC and Hickory, NC Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Scope of Position: The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations.
This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements.
The Lead Technician serves as a subject matter expert and mentor to junior technicians.
This position is in the Engineering Project and is focused on capacity additions and the associated line installations and debug from a mechanical perspective.
Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.
As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.
Leverage knowledge of mechanical and electrical engineering, machining and designing processes to improve performance of equipment/manufacturing process.
Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.
Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.
Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.
Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.
Verify installations meet OEM specifications, safety codes, and quality standards.
Leadership and Coordination Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.
Assign tasks, monitor progress, and ensure efficient use of labor and resources.
Mentor and train junior technicians, providing hands-on guidance and technical instruction.
Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.
Quality and Documentation Conduct inspections and quality checks throughout the installation process.
Complete installation reports, checklists, punch lists, and as-built documentation.
Support equipment testing, startup, and customer acceptance activities.
Project Support Assist with installation planning, sequencing, and scheduling.
Coordinate material handling, tools, and equipment needed for installations.
Support continuous improvement initiatives and best practices in installation methods.
Day-to-Day Responsibilities: Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.
Manage and lead installation and debugging activities to meet milestone and timeline objectives for successful capacity adds.
Design and implement mechanical solutions and process changes to improve capability of manufacturing equipment.
Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.
Develop and update engineering and operations documentation.
Support training for the operations workforce regarding equipment or operations changes Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).
Align, test, and calibrate mechanical systems after installation.
Diagnose complex mechanical failures and recommend effective solutions.
Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.
Identify opportunities to improve equipment reliability, efficiency, and safety.
Collaborate with other departments to implement process improvements.
Qualifications Required Education: Associate's degree A high school degree will be considered with significant hands-on experience Required Years and Area of Experience: 3 years' experience in new equipment installations in a manufacturing environment, start-up experiences a plus Experience in a fast-paced, changing environment with multiple priorities Strong knowledge of mechanical systems, industrial equipment, and installation techniques.
Proven ability to read and interpret engineering drawings and technical documentation.
Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.
Required Skills: Ability to learn new technology and processes quickly Strong technical fundamentals with mechanical engineering skills Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.
Proficient with PC software, including Microsoft Office Suite Strong communication skills Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.
Ability to read and interpret technical drawings, blueprints, and schematics.
Proficiency in using hand tools, power tools, and diagnostic equipment.
Strong problem-solving, analytical, and critical-thinking skills.
Knowledge of safety regulations and practices in an industrial setting.
Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).
Certifications: Mechatronics trades highly desired Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.
OSHA or other safety certifications may be required.
Desired Skills: Hands-on experience in commercial manufacturing equipment Project leadership/management experience (including milestone management and financial ownership) Experience in vendor/supplier management on-site/off-site Experience with CAD SAP, Maximo, Maintenance Leadership Detail-oriented and able to perform with limited supervision.
Soft Skills: Leadership experience in technical project management Ability to work and effectively collaborate within a team Ability to allocate/supervise resources to accomplish aggressive project milestones and timeline within specification and costs.
Able to shift tasks quickly Able to prioritize and multitask Communicate effectively both verbal and written Hours of work/work schedule/flex-time: 40 hrs.
(overtime expected).
Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
CAD
Not Specified
D
IT Solution Architect (Financial Systems) - Remote
✦ New 🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Not Specified
Lead Electrical CAD Designer – Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Test Development Manager - Supports Hybrid Work Schedule (AUSTIN)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded