Engineering Jobs in Illinois Flexible
829 positions found
The Certified Medical Assistant / Registered Medical Assistant performs routine administrative and patient care support duties in a medical practice to assist medical and/or nursing staff in the examination and treatment of patients and ensures that the office runs smoothly.
Qualifications
Certifications: Registered Medical Assistant (RMA) (ARMA) - American Registry of Medical Assistants (ARMA)American Registry of Medical Assistants (ARMA); Registered Medical Assistant (RMA) (AAH) - American Allied Health (AAH)American Allied Health (AAH); Certified Medical Assistant (NCCT) - National Center for Competency Testing (NCCT)National Center for Competency Testing (NCCT); Certified Medical Assistant (CMA) - American Association of Medical Assistants (AAMA)American Association of Medical Assistants (AAMA); Registered Medical Assistant (RMA) (AMT) - American Medical Technologists (AMT)American Medical Technologists (AMT); Nationally Registered Certified Medical Assistant (NRCMA) - National Association for Health Professionals (NAHP)National Association for Health Professionals (NAHP); Certified Clinical Medical Assistant (CCMA) - National Healthcareer Association (NHA)National Healthcareer Association (NHA); Basic Life Support (BLS) within 30 days - American Heart Association (AHA)American Heart Association (AHA), Education: H.S. Diploma/GED, Work Experience:
Responsibilities
Rooming patients: Collecting pertinent information regarding the patient's chief complaint, family history, social history, surgical history, and medication reconciliation upon arrival for a patient visit. Telephone Interactions: As directed, completing necessary telephone communications with patients, families, pharmacies, and/or other health care facilities. Gathering information and maintaining patient information via telephone per department specific processes and policies. Administrative tasks including, but not limited to, patient check in or check out, prior authorizations, scheduling appointments, verification of benefits, and coordination of referrals and testing. Office procedures as directed and per department specific competencies. May perform procedures such as ear wash, wound care, bladder scanning, suture or staple removal, reading results of negative TB skin tests or steering patient to the care of a department nurse when TB screening appears to have indications of a positive read, and other diagnostic testing at the point of care. Provide patient with written instructions regarding procedures, medications, or follow up instructions at the direction of the provider. CMA staff may retrieve and provide condition specific education from the internet, internal website, or printed materials per the provider directions and orders. Administer medications per the provider order. Exceptions - biologic or Schedule II, III medications. Provide assistance with prescription medication refills per department protocols. Call medications into pharmacies, notify patients of refills, and documents actions within the EMR per provider orders. Maintain department specific competencies related to point of care testing, equipment handling, and specialty training. Update and maintain different registries within the department. EMR in-basket work, to include, but not limited to - result notes, medication refills, answering patient portal & telephone messages within scope. Collects and Processes specimens accurately Obtain and record vital signs accurately Perform Injections(IM, SQ) within scope Perform ear irrigations Perform bladder scans
About Us
Find it here.
Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.
Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:
Compensation and Benefits
The compensation range for this position is $18.33per hour - $29.69per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.
The Certified Medical Assistant/Registered Medical Assistant performs routine administrative and patient care support duties that assists the Dept to maintain compliance with regulatory standards. This position will meet the needs of Carle Health in caring for our future and current employees.
Qualifications
Certifications: Certified Medical Assistant (CMA) - American Association of Medical Assistants (AAMA); Registered Medical Assistant (RMA) (AAH) - American Allied Health (AAH); Certified Medical Assistant (NCCT) - National Center for Competency Testing (NCCT); Basic Life Support (BLS) within 30 days - American Heart Association (AHA); Registered Medical Assistant (RMA) (AMT) - American Medical Technologists (AMT), Education: H.S. Diploma/GED, Work Experience:
Responsibilities
Rooming patients: collecting pertinent information regarding the reason for visit Good customer service Telephone interactions: communications with patients and other health care facilities. Administrative tasks: patient check in and out, scheduling appts. ordering supplies, Quality checks on equipment, documentation in computer programs. Office procedures as directed and per department specific competencies Maintain department specific competencies. Administer vaccinations Provides support to the nursing staff. Performs N95 mask fit testing. Reviews immunizations for completeness. Ensures documentation of care is complete and accurate. Assist in influenza vaccination campaign Assist in pre placement physicals. Monitor vital signs. Assess for allergic reactions
About Us
Find it here.
Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health.
Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We’ve grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We’re developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world’s first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet® designations, the nation’s highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information:
Compensation and Benefits
The compensation range for this position is $18.33per hour - $29.69per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate’s experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit /benefits.
Position Title: Senior Salesforce Engineer- Financial Services Cloud Locations: Rockford_IL Time Type: Full time Req ID: JR1200-Rockford_IL At Midland, we’re proud to be a little different.
You can see it in our bright orange signs-but there’s more to it than that.
With our heartfelt and personalized approach, we’re focused on meeting every customer’s needs with the brightest solutions.
For more than 140 years, we’ve learned by serving customers skillfully with dedication and follow-through, we can brighten every interaction to drive our collective success.
And this goes beyond traditional banking.
We foster programs that empower our communities, continuously invest in our employees, and actively pursue brighter futures for all.
Our humble ambition keeps us growing, giving back, and looking ahead.
We’re innovating and optimizing our services to ensure we stay unique
- providing strength you can count on with heart you can feel.
You might say we’re unlike any other bank.
And you’d be right." At Midland States Bank, base salary is one component of our Total Rewards program.
Exact compensation is determined by factors such as (but not limited to) education, skills, internal equity, and experience.
This position offers additional compensation in the form of short-term incentives (i.e.
bonus and/or commission) and may include long-term incentives (i.e.
stock awards).
Benefits for this role include comprehensive healthcare, well-being benefits, paid family leave as well as generous paid time off.
Total Rewards also include banking perks, an Employee Stock Purchase Plan, 401K plan with company match and may include the opportunity to participate in our Non-Qualified Deferred Compensation plan.
Incentives and benefits are subject to eligibility requirements.
Salary Range: $88,000-$130,000/annually Position Summary This position is responsible for designing, integrating, building, and maintaining Salesforce-based Sales and Financial Services solutions within Midland States Bank.
The role ensures scalable, secure, and compliant solutions using the Salesforce Financial Services Cloud platform, supporting business objectives and optimizing system functionality.
The Senior Solutions Engineer reports to the Team Lead
- Salesforce.
Responsibilities: Design and architect scalable and efficient Salesforce Financial Services Cloud solutions aligned with business needs.
Evaluate and recommend technical solutions, including AppExchange products, to enhance functionality.
Manage Salesforce system administration: custom objects, fields, layouts, validation rules.
Implement automation: workflows, approval processes, and rules to streamline operations.
Ensure data governance: audits, data management, and quality standards adherence.
Design and execute test plans for solution validation.
Lead Salesforce integrations ensuring consistency and information flow across systems.
Collaborate with stakeholders to evaluate integration needs and maintain implementations.
Provide technical mentorship to junior team members and serve as a subject matter expert.
Support automations, workflows, and approvals for Sales Cloud, Service Cloud, and Marketing Cloud.
Share best practices, industry trends, and new features with the team and contribute to the development of internal knowledge resources.
Stay current on Salesforce updates and industry best practices.
Be task-focused and adaptable in a dynamic work environment.
Present ideas clearly and concisely to technical and non-technical audiences.
The role requires occasional travel for training and team meetings, and willingness to travel periodically, to locations within market as needed.
May require work in a Midland office to ensure collaboration and support of internal and external customers.
Maintain compliance with all applicable regulations including, but not limited to, the Bank Secrecy Act (BSA).
Other duties as assigned.
Requirements: Bachelor’s degree in Computer Science, Management Information Systems, Accounting, Finance, or related field.
Minimum 7 years of Salesforce experience, including 3 years with Financial Services Cloud or related financial implementations.
Experience with Salesforce Industries OmniStudio and deployment in banking environments.
Knowledge of sales and marketing methodologies including account/territory/opportunity management, demand generation, and lead nurturing.
Experience with Salesforce tech stack (administration, JavaScript, Lightning Design System, Apex, Visualforce).
Experience with analysis/reporting tools such as Salesforce, SAS BI, MS BI, or Tableau.
Salesforce certifications (e.g., Admin, Advanced Admin, Platform) preferred.
Ability to diagram customer processes and recommend effective changes.
Ability to manage multiple priorities in a dynamic, fast-paced environment.
Strong communication skills (written, verbal, and presentation).
Excellent organizational and time management skills.
or similar CRM proficiency.
Understanding of customer and partner relationship strategies.
Knowledge of the customer journey and ability to map touchpoints to the sales process.
Basic understanding of API and REST.
Basic knowledge of database architecture.
Experience in ITIL or formal SDLC methodologies.
Excellent oral, written, and interpersonal communication skills with the ability to instruct others, interpret documents, and write reports and correspondence.
Ability to deal with complex problems involving multiple facets and variables in non-standardized situations.
Experience with the sales process, cycles and methodology, including: Familiarity with Salesforce Industries OmniStudio Framework.
Experience migrating Salesforce orgs or deploying FSC in a banking or financial institution.
Account/territory management Opportunity management Contact management Business development Professional services Partner management Technical consulting Service engineering Experience with marketing activity, including: Demand generation Lead nurturing Customer profiling Social & digital media Campaign influence tracking Competencies: Business insight Cultivates innovation Drives results Makes sound decisions Being a brand champion Collaborates Communicates effectively Customer focus Being Authentic Emotional Intelligence Self development Being flexible and adaptable At Midland States Bank, we believe that when we can bring our whole selves to work each day, we become happier, more comfortable, more confident and more excited to do great things for our customers, each other and our company.
We’re proud to be an Equal Opportunity and Affirmative Action employer.
At Midland, we recruit, employ, train, compensate and promote without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
If you are looking for a place to grow, we encourage you to apply at Midland States Bank, because you belong here.
If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to Midland States Bank Human Resources at
Midland States Bank may use automated tools and artificial intelligence (“AI”) to assist with recruiting, screening, and hiring decisions.
In accordance with the Illinois Human Rights Act (effective January 1, 2026), these tools are designed and monitored to be neutral and job-related, and must not be used in a way that discriminates against applicants or employees based on any protected characteristic.
THIS JOB DESCRIPTION DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT Compensation details: 88 Yearly Salary PI400a89af37d1-25448-38959719
Your role and responsibilities
About the Opportunity
IBM Consulting is seeking an accomplished Data & Analytics Associate Partner to accelerate our growth within the Industrial & Communications sectors. This executive role is responsible for shaping client vision, cultivating senior executive relationships, and developing data-driven solutions that enable clients to successfully navigate complex transformation programs.
You will bring together deep industry expertise and IBM’s portfolio of data, analytics, and AI capabilities to help organizations modernize their data ecosystems—migrating from legacy platforms to modern hybrid cloud architectures—while adopting next-generation analytics, GenAI, and agentic AI to strengthen decision-making and deliver measurable business and financial outcomes.
This role is ideal for a seasoned leader who integrates industry depth, consulting excellence, and technical thought leadership, has a strong understanding of competitive market dynamics, and consistently delivers high-impact transformation at scale.
Key Responsibilities
Market Leadership & Growth
Expand IBM’s Data & Analytics presence by identifying new market opportunities, developing differentiated solutions, and building a strong pipeline.
Engage senior client executives to understand strategic priorities and shape data transformation roadmaps aligned to their business and financial goals.
Lead end-to-end sales cycles, including solution definition, proposal leadership, financial structuring, and contract negotiation.
Strategic Advisory & Transformation Delivery
Advise C-suite leaders on strategies to their data estate modernization, advanced analytics, GenAI, and agentic AI to drive business performance.
Architect integrated solutions that include:
Migration from legacy data platforms to modern cloud-based architectures
Data engineering and Information governance
Business intelligence and advanced analytics
GenAI-powered and agentic AI-driven automation and decisioning
Lead complex transformation programs from discovery through delivery, ensuring measurable outcomes and client satisfaction.
Engagement Excellence & Financial Stewardship
Oversee multi-disciplinary delivery teams to ensure high-quality, consistent execution across all program phases.
Manage engagement financials, including forecasting, margin performance, and overall portfolio profitability.
Align right client technologies, industry expertise, and global delivery capabilities to maximize client value.
Practice Building & Talent Development
Recruit, mentor, and grow top-tier consultants, architects, and data specialists.
Build and scale capabilities in data modernization, cloud data engineering, analytics, GenAI, and emerging agentic AI techniques.
Contribute to practice strategy, offering development, and capability growth across the global Data & Analytics team.
Thought Leadership & Market Presence
Stay ahead of sector and technology trends, including cloud modernization, GenAI, agentic system design, regulatory changes, and evolving competitive dynamics.
Represent IBM at industry conferences, client events, webinars, and executive roundtables.
Create original thought leadership—articles, perspectives, point-of-views—that positions IBM as a leading advisor in data and AI-driven transformation.
This position can be preformed anywhere in the US.
"Leaders are expected to spend time with their teams and clients and therefore are generally expected to be in the workplace a minimum of three days a week, subject to business needs."
Required technical and professional expertise
Qualifications
12+ years of experience in consulting, data strategy, analytics, or digital transformation, with strong exposure to the Industrial or Communications sectors.
Hands-on experience modernizing data ecosystems, including migrating from legacy on-premise platforms to modern cloud-native or hybrid cloud architectures.
Deep expertise with major cloud platforms and their data/analytics stacks, including implementation experience with:
AWS (e.g., Redshift, S3, Glue, EMR, Athena, Lake Formation, Bedrock, SageMaker)
Microsoft Azure (e.g., Azure Data Lake, Synapse, Data Factory, Databricks on Azure, Fabric, Cognitive Services)
Google Cloud Platform (e.g., BigQuery, Cloud Storage, Dataflow, Dataproc, Vertex AI)
Experience designing and implementing end-to-end data pipelines, governance frameworks, and analytics solutions on one or more of these platforms.
Strong understanding of GenAI architectures, LLM integration patterns, vector databases, retrieval-augmented generation (RAG), and emerging agentic AI frameworks.
Proven track record of selling, structuring, and delivering large-scale data and AI transformation programs.
Robust technical and functional expertise in data engineering, cloud data platforms, analytics, AI/ML, information management, and governance.
Executive-level communication and presence, with demonstrated ability to influence senior stakeholders and convey complex topics through compelling narratives.
Financial management experience, including engagement economics, forecasting, margin optimization, and portfolio profitability.
Demonstrated leadership in building, scaling, and developing high-performing consulting and technical teams.
Preferred technical and professional experience
IBM is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, caste, genetics, pregnancy, disability, neurodivergence, age, veteran status, or other characteristics. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status.
#J-18808-Ljbffr
Mechanical Maintenance and Technical Instructor or Sr Mechanical Maintenance Instructor Position for Dresden Nuclear Power Station in Morris, IL
This Mechanical Maintenance and Technical Instructor role can be filled at the Maintenance and Technical Instructor Level, or at the Sr Maintenance and Technical Instructor Level. Please see minimum qualifications list below for each level.
Who We Are
As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.
Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.
Total Rewards
Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.
Maintenance and Technical Instructor Job Code XKAP- Expected salary range of $105,300 to $117,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).
Sr Maintenance and Technical Instructor Job Code XKAV - Expected salary range of $121,500 to $135,000 varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).
Primary Purpose of Position
Demonstrates mastery of skills and extensive subject matter knowledge in carrying out assignments associated with the analysis, design, development, implementation, evaluation, and proposed modification of plant specific maintenance and technical training programs (Chemistry, Engineering, Maintenance: Electrical, Instrumentation, and Mechanical, and Radiation Protection).
Primary Duties and Accountabilities
- Drives the clean energy center (CEC) and personnel performance improvement through the use of training. Develops, schedules, coordinates, and conducts performance-based maintenance or technical training programs as required by user community in accordance with Constellation's systematic approach to training model, department procedures, and with proper application of the analysis, design, development, implementation, and evaluation phases.
- Prepares trainee examination and conducts trainee evaluations for classroom, laboratory, OJT, and simulator environments, as appropriate and conducts counseling sessions for trainees, evaluates the results, and recommends/develops individualized training programs.
- Participates in CEC support activities, i.e. outage support, root cause support, line assessment support.
- Assures the training programs are maintained current and incorporate information gained from Institute of Nuclear Power Operations (INPO) Significant Operating Experience Reports and Constellation Nuclear Event Reports (NERs), Nuclear Regulatory Commission (NRC) Bulletins and Information Notices, CEC design change and backfit information, CEC procedure changes and revisions, new regulations, and training effectiveness reports.
- Support CEC and fleet in the areas of business initiatives, project management, refuel outage support, emergency preparedness duties, and special projects.
- Supervises the collection and maintenance of auditable training records and reports required to document training program activities.
- Participates in NRC, INPO and management audits, and prepares responses to audit findings.
- Maintains knowledge of plant operations, disciplinary skills and techniques, commensurate with the responsibility to develop and conduct effective, high-quality training.
- Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.
This Maintenance and Technical Instructor role can be filled at the Maintenance and Technical Instructor Level, or at the Sr Maintenance and Technical Instructor Level. Please see minimum qualifications list below for each level.
Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAP
MINIMUM QUALIFICATIONS
- High school diploma/GED with 3 years of nuclear mechanical maintenance experience or 5 years of related (mechanical maintenance instruction) experience OR
- Associate&rsquos/Bachelor&rsquos degree in a technical discipline (e.g. chemistry, engineering, health physics, mathematics, physics), education or training with 2 years of related mechanical maintenance experience or 4 years of related (mechanical maintenance instruction) experience
- The requirements as outlined above meet or exceed ANSI/ANS-3.1-2 Standard, Selection, Qualification, and Training of Personnel for Nuclear Power Plants
- Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties
Sr Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAV
MINIMUM QUALIFICATIONS
- High school diploma/GED with 5 years of nuclear mechanical maintenance background or 7 years of related (Mechanical Maintenance) experience OR
- Associate&rsquos degree in technical discipline (e.g. chemistry, electrical, engineering, instrumentation, mathematics, mechanical, radiation protection), education or training with 3 years of nuclear mechanical maintenance background or 5 years of related (Mechanical Maintenance) experience OR
- Bachelor&rsquos degree in a technical discipline (e.g. chemistry, engineering, health physics, mathematics, physics), education or training with 3 years of related (Mechanical Maintenance) experience
- 2 years of training or education experience in Mechanical Maintenance
- The requirements as outlined above meet or exceed ANSI/ANS-3.1-2 Standard, Selection, Qualification, and Training of Personnel for Nuclear Power Plants
- Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties
Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAP
PREFERRED QUALIFICATIONS
- Previous experience in delivering training
- Knowledge of and experience with the systematic approach to training (SAT)
Sr Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAV
PREFERRED QUALIFICATIONS
- Foreman/lead or supervisory experience
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Amit, at 224 507 1290 Title: IT Solution Architect (Financial Systems)
- Remote Location: Remote (Candidates local to Corning, NY and Charlotte, NC are preferred.
Open to candidates in other locations; candidates must be willing to work EST time zone) Duration: 12 Months with possibility of extension based on demand.
Schedule: Full-time, M-F, 8 AM
- 5 PM.
Some potential flexibility may be required for after-hours work, as needed.
Travel
- up to 25% for travel to Corning, NY.
Estimated as one week per month based on project need.
Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Position Summary The IT Solution Architect for Supply Chain and Finance is responsible for designing, developing, and guiding the implementation of enterprise technology solutions that support client's financial and supply chain processes.
This role collaborates closely with business stakeholders and cross-functional IT teams to ensure systems are scalable, secure, and aligned with organizational strategy.
The architect enables operational excellence by shaping solution roadmaps, ensuring platform integrity, and driving continuous improvement across finance and supply chain applications.
Key Responsibilities Solution Architecture and Design Develop end-to-end architectural designs for finance and supply chain systems in alignment with business objectives.
Assess existing application landscapes and recommend improvements, modernization opportunities, and integration strategies.
Ensure solutions comply with security, data governance, and enterprise architecture standards.
Business Partnership and Collaboration Engage with Finance, Supply Chain, and IT partners to understand business needs and translate them into technical requirements.
Participate in recurring strategic and operational touchpoints, including cFIN review sessions and architecture-focused team meetings.
Provide subject matter guidance on financial systems such as OneStream and other platforms influencing client's digital finance ecosystem.
Technical Leadership and Support Serve as the technical lead for solution implementations, enhancements, and integrations across finance and supply chain domains.
Address escalated issues, provide root-cause analysis, and ensure long-term stability of assigned applications.
Partner with engineering and operations teams to ensure solution resilience, performance, and sustainability.
Governance, Standards and Documentation Contribute to the development of architecture standards, design patterns, and best practices.
Maintain accurate architectural documentation, including roadmaps, diagrams, functional specifications, and integration models.
Continuous Improvement and Innovation Evaluate emerging technologies and recommend opportunities to enhance process efficiency, automation, and system capabilities.
Support modernization initiatives that strengthen client's digital transformation objectives in the finance and supply chain organizations.
Required Qualifications
- Education and Experience Bachelor's degree in Information Technology, Computer Science, Engineering, or related field (minimum required).
5 years of experience as a Solution Architect with financial systems.
Proven experience architecting solutions in enterprise finance and/or supply chain environments.
Deep knowledge of financial systems (e.g., OneStream, SAP cFIN (Central Finance), or similar platforms).
Familiarity with SAP finance and supply chain modules.
Strong understanding of systems integration, data flows, and enterprise application ecosystems.
Ability to translate complex technical concepts into clear business language.
Key Competencies Strategic Thinking Ability to design future-focused, scalable solutions.
Technical Expertise Strong architecture and platform skills across finance and supply chain.
Communication and Influence Effectively collaborates with technical and non-technical stakeholders.
Problem Solving Skilled at diagnosing complex issues and proposing durable solutions.
Execution Ability to manage multiple priorities and deliver high-quality outcomes.
Preferred Qualifications Experience working in a global, matrixed organization.
Understanding of data governance, security protocols, and architecture frameworks.
Demonstrated ability to lead collaborative solution workshops and stakeholder discussions.
Interview Process: Two rounds.
First round phone screen with direct manager.
Second round video panel interview, including technical review.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP cFIN, OneStream
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries—including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing.
JOB SUMMARY
Jabil is seeking a Manufacturing Test Development Manager who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
- People manager for a team of software developers and product engineers in support of global cloud operations.
- Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
- Solicit ongoing self and team feedback from the business unit (BU), customer and team members.
- Perform team member evaluations professionally and on time.
- Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
- Coordinate activities of team and keep them focused in times of crises.
- Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
- Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications that can be utilized from findings, costs of project, and equipment and human resource requirements, technical requirements.
- Provide direction on design and development activities to improve, modify or design new equipment products and processes.
- Oversee key projects, processes and performance reports, data, and analysis.
- Develop, determine, and implement policies, procedures and programs.
- Analyze technology trends, human resources needs and market demand to plan projects.
- Oversee definition and collaboration on overall test infrastructure and application architectures.
- Creation of behavioral and high-level software design specifications.
- Development of production infrastructure and related application code.
- Lead and participate in peer/code reviews.
- Contribute and improve software build methodology, procedures, and environment.
- Operational and development support for the software and test infrastructure at production facilities
JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS:
- Knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations.
- Agile, CICD, and SLDC process implementation and application experience.
- Knowledge/Expertise in the following programming/scripting languages: Python, BASH, Java experience a plus.
- Linux development experience with a solid understanding of its fundamentals and internals: Ubuntu/ CentOS
- Well-versed in the following container/virtualization environments: VMware, Docker.
- Solid understanding of large-scale distributed systems in practice, including multi-tier architectures, application security, monitoring and storage systems.
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
- Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester
- Experience in the creation and configuration(DHCP, PXE boot, nginx) of Virtual Machines (VMs), VMWare preferred.
- Experience with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Experience with front-end and back-end Web UI design.
- Experience with common web APIs (REST, XML-RPC).
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred.
- 10+ years’ experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience.
- Excellent verbal and written communication skills.
- Prior experience directly managing software development teams
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or International travel, up to 25%, may be required.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
