Engineering Jobs in Hallstead Pennsylvania

Description

As a Manufacturing Engineering Intern at Elliott Manufacturing, you will have the opportunity to apply learned knowledge and skills while gaining valuable hands-on experience to start your career in Engineering. This internship will provide exposure to a manufacturing plant while also supporting other CentroMotion businesses remotely.

Responsibilities:

1. Establish inventory of manufacturing and quality control tooling.

2. Utilize existing Gage Control software to track tooling (if possible).

3. Establish physical storage locations for all tooling.

4. Implement 6S for tooling, so that missing tooling can be easily physically identified.

5. Establish check-in/check-out process for tooling.

6. Review QC tooling and ensure quantities of tools are appropriate for each tool type (too many/too little).

7. Look for opportunities to reduce QC calibrations for unnecessary and overabundance of tools.

8. Work with operators to create work instructions

Requirements

• Student of Junior or Senior standing currently pursuing a degree in Engineering or related field
• Strong attention to detail and organizational skills
• Excellent communication and interpersonal skills
• Proficient in Microsoft Office Suite
• Ability to multitask and prioritize tasks effectively
• Must be able to maintain confidentiality and sensitive information

Akkodis is seeking a Printed Circuit Board Assembly Test Technician for a 6 Months Contract to Hire position with a client located in Binghamton NY 13905(Onsite)

Pay Range: $20/hr. - $24/hr on W2(All inclusive). (The rate may be negotiable based on experience, education, geographic location, and other factors.)

Position Summary

• The Printed Circuit Board Assembly (PCBA) Test Technician is responsible for performing complex technical functions related to the assembly, testing, troubleshooting, and repair of printed circuit board assemblies.
• This role supports departmental output objectives by operating PCBA assembly and test equipment, conducting failure analysis, and contributing to continuous improvement initiatives.

Key Responsibilities

• Perform complex technical tasks related to the assembly, testing, and troubleshooting of PCBAs.
• Operate Gen-Rad Test and Flying Probe Test machines.
• Troubleshoot failed PCBAs and assemblies to the component level.
• Utilize assembly prints, mechanical drawings, electrical schematics, and electronic test equipment including: Digital Multimeters (DMMs), Oscilloscopes, Function Generators, Power Supplies, Frequency Counters, Pressure Indicators
• Perform and document failure analysis results clearly and accurately.
• Interpret electrical schematics and/or mechanical assembly prints depending on assigned focus area.
• Demonstrate understanding of electronic component functionality.
• Apply Environmental Stress Screening (ESS) testing concepts.
• Assist in developing production documentation such as work instructions and troubleshooting guides.
• Perform minor repair and maintenance of production and test equipment.
• Provide training and technical support to production operators and technicians.
• Contribute to production goals through effective repair and quality-focused work practices.
• Maintain commitment to quality, attendance, productivity, and customer satisfaction.
• Work overtime as required to meet business demands.

Education & Experience Required:

• High School Diploma or GED
• Minimum two (2) years of experience in production and/or manufacturing environment
• Associate of Applied Science (AAS) in Electrical or Mechanical Engineering Technology
• Experience in manufacturing, testing, and troubleshooting analog and digital circuits in aircraft instruments or electronic systems

Required Skills & Competencies:

• Strong knowledge of prototype assembly drawings and blueprint reading
• Ability to perform soldering and mechanical assembly of complex, critical components
• Willingness and aptitude to become solder certified
• Knowledge of military standards and ISO 9000 quality systems
• Proficiency in electronic test equipment and measurement tools
• Strong troubleshooting and analytical skills
• Effective communication, collaboration, and interpersonal skills
• Self-motivated, fast learner, and capable of working independently
• Continuous improvement mindset with creative problem-solving abilities

If you are interested in this Printed Circuit Board Assembly Test Technician job in Binghamton NY 13905(Onsite) please contact Ashish Rajput at 61 or For other opportunities available at Akkodis, go to Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

The California Fair Chance Act

Los Angeles City Fair Chance Ordinance

Los Angeles County Fair Chance Ordinance for Employers

San Francisco Fair Chance Ordinance

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Position Summary

The Entry-Level Manufacturing Engineer will support the production of next-generation DragonSCALES solar power technology designed for emerging Space 2.0 satellite and spacecraft markets. The role provides practical experience in precision manufacturing, including exposure to electronics assembly and SMT processes used in high-reliability aerospace environments. The engineer will assist in developing, documenting, and optimizing processes that ensure consistent quality, throughput, and compliance with aerospace-grade technical guidelines.

The ideal candidate is detail-oriented, motivated to learn, and excited to contribute to the rapidly expanding space manufacturing ecosystem.

Key Responsibilities

Process Support & Optimization

• Assist in developing and refining manufacturing processes for solar module assembly, bonding, deposition, and encapsulation.
• Conduct time-and-motion studies, yield assessments, and capacity evaluations across both mechanical and SMT-related operations.
• Support root-cause analysis and corrective/preventive action (RCCA/CAPA) activities.

SMT and Electronics Assembly Support

• Provide entry-level technical support for SMT line operations, including stencil printing, component placement, reflow soldering, inspection, and rework.
• Monitor SMT process parameters and assist in evaluating process capability and repeatability.
• Support creation and revision of SMT-related work instructions, soldering criteria, and inspection standards.
• Collaborate with Quality Engineering to evaluate solder joint quality, component fit, and compliance to IPC-A-610/620 or equivalent aerospace standards.
• Assist in troubleshooting basic SMT equipment issues and coordinate with senior engineers or vendors when required.

Production Floor Support

• Provide real-time technical assistance to operators and technicians.
• Monitor key parameters such as material flow, equipment performance, and process stability.
• Document non-conformances and aid in disposition of non-conforming material.

Equipment & Tooling Support

• Assist with equipment qualification, calibration, and maintenance tracking.
• Support the design and implementation of fixtures, tools, and gauges to improve repeatability and throughput.

Quality & Data Analysis

• EIDP generation and review
• Collect and analyze production data, key characteristics, and process capability metrics (Cp/Cpk).
• Support control charting, statistical process control (SPC), and reporting to internal stakeholders.
• Collaborate with Quality Engineering to ensure adherence to material, chemical, and dimensional specifications.
• Cross-Functional Collaboration
• Work closely with R&D, Materials Engineering, Quality, and Operations to industrialize new technologies.
• Participate in manufacturing readiness reviews (MRR’s/DRB's) and production readiness assessments.

Documentation & Compliance

Generate and revise work instructions, standard operating procedures (SOPs), process

specifications, and travelers/routers.

Ensure processes comply with aerospace and program-specific technical guidelines.

Maintain accurate production, test, and inspection records.

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, Materials Science, or related technical field.
• Basic understanding of manufacturing fundamentals, including process flow, work instructions, and quality systems.
• Foundational understanding of SMT processes, including solder paste printing, component placement, reflow, and inspection.·
• Basic SPC, data analysis, and root-cause methodologies (5-Whys, Ishikawa).
• Strong analytical, organizational, and communication skills.
• Ability to work hands-on in a manufacturing or cleanroom environment.
• Proficiency with Excel or similar data-analysis tools.
• Familiarity with CAD tools (SolidWorks, Creo, or similar).

Preferred Qualifications

• Internship or co-op experience in aerospace, semiconductor, solar, or precision manufacturing.
• Experience with bonding, lamination, vacuum processes, or SMT based micro-assembly.
• Exposure to high-reliability manufacturing environments (IPC, NASA, or AS9100 standards).
• Basic understanding of optics, thin-film materials, or electronics assembly.

Key Attributes for Success

• Strong attention to detail and commitment to quality.
• Willingness to learn highly specialized, space-qualified SMT manufacturing processes.
• Comfortable working in a fast-paced, evolving production environment.
• Collaborative mindset and ability to communicate effectively with diverse teams.
• Bias toward action and problem-solving.

Candidate must be a US Citizen or Green Card Holder

*No Experience Necessary*

ABOUT THIS JOB

***THIS POSITION REQUIRES AN ENLISTMENT IN THE U.S. ARMY OR ARMY RESERVE***

As a Combat Engineer, you’ll work quickly and skillfully to help Soldiers navigate while on combat missions by constructing bridges, clearing barriers with explosives, and detecting and avoiding mines and other environmental hazards. You'll provide expertise and come up with quick and creative engineering solutions, constructing fighting positions, fixed and floating bridges, and obstacles and defense positions.

Skills you’ll learn align with Construction & Engineering, Demolition & Explosives, Operate Heavy Equipment. In addition, you could earn 45 nationally recognized certifications!

JOB DUTIES

• Maintain emergency notification data
• Maintain radio and data distribution systems
• Perform signal support functions and technical assistance for computer systems
• Provide technical assistance and training for local-area networks
• Maintain equipment, terminal devices, assigned vehicles and power generators

REQUIREMENTS

• 14 weeks of One Station Unit Training, which combines Basic Training and Advanced Individual Training
• U.S. Citizen
• 17 to 34 Years Old
• High School Diploma or GED
• Meet Tattoo Guidelines
• No Major Law Violations
• No Medical Concerns

BENEFITS

The Army offers a complete package of benefits that not only supports you and your family but also helps you advance in your career. Whether you serve part-time or full-time as an enlisted Soldier or Army Officer, you’ll earn competitive pay with opportunities for bonuses, as well as receive health care at little to no cost. You could also receive money for education, student loan repayment assistance, training and certifications, housing, living expenses, and more.

• Paid Training and credentialing to strengthen your skillsets
• Monthly salary (based off pay grade and time in service)
• Housing and meal allowance for full-time Soldier
• 30 days paid annual vacation
• 401(K) type savings plan
• Full-coverage medical and dental insurance for Soldiers and immediate family member
• Paid tuition opportunities to continue your education
• Signing bonus - up to $40,000 in cash bonuses for completing training in selected Military Occupational Specialties

Senior Design Engineer – Connectors (100-130K)

We have an exciting opportunity available for a Senior Design Engineer in the Binghamton, NY area.

Relocation Assistance Provided.

About the Role:

Are you passionate about design and excited to help mentor the next generation of engineers?

We're looking for an experienced Senior Design Engineer to join our team. You'll play a critical role in shaping new products and improving existing ones, especially in the areas of connector design and plastic injection molding.

Duties and Responsibilities:

• Take charge of product design from concept through to launch, focusing on connectors and injection-molded parts.
• Provide mentorship to a team of eager junior engineers.
• Collaborate with cross-functional teams to develop innovative solutions.
• Utilize SolidWorks, FEA tools, and ePDM for engineering documentation and design.
• Manage technical documentation like BOMs, ECNs, and develop detailed test plans.

Education and Experience:

• Bachelor’s in Mechanical Engineering (or related field) and at least 5+ years of experience.
• Skilled with plastic part design and material selection.
• Knowledge of SolidWorks, FEA Analysis, and Mold Flow.
• Familiar with GD&T, tolerance analysis, and lean tools (e.g., Root Cause Analysis, A3 reports).
• You love mentoring others and guiding junior engineers through complex projects.

To apply, submit your resume to

Sapphire Recruitment is an Equal Opportunity Employer

The H&K Group, Inc. is searching for a Project Engineer to support projects throughout Northeast PA and the Lehigh Valley, with a current focus on Susquehanna, Wyoming, Lackawanna, Luzerne, Monroe, Carbon, Schuylkill, Lehigh, and Berks Counties. The ideal candidate is a self-motivated, organized, competent, and professional individual who manages the planning, design and permitting of civil engineering projects including, but not limited to, highways, subdivisions, and land development. Engineering experience with bridge projects is highly desired. Individual should possess a strong knowledge of stormwater, erosion and sediment control, water and sewer design principles and should be able to interpret and apply municipal land use ordinances.

Why work for H&K Group, Inc.?

• Competitive salary commensurate with experience
• 100% Company-paid Health Benefits
• 401(k) Savings and Investment Plan
• Tuition reimbursement programs available to qualifying employees for approved programs
• Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more

Essential Duties and Responsibilities 

• Performs all work according to OSHA and H&K Safety policies
• Prepare thorough site analysis to determine allowable density and layout constraints based upon municipal land use ordinances and site-specific features.
• Prepare horizontal and vertical alignment of street layout and profiles.
• Prepare detailed grading plans.
• Prepare thorough stormwater management design based upon municipal land use ordinances and/or State best management practices/regulations.
• Prepare thorough water supply and sewage facilities design.
• Prepare erosion and sedimentation control/NPDES plans and post construction stormwater management designs in accordance with State best management practices/regulations.
• Prepare utility design and manage utility coordination for various land development projects.
• Manage sub-consultants related to geotechnical, wetlands, traffic, etc.
• Travel to field, project, Township, etc. meetings to communicate project design aspects with Project Managers, Engineers, Township officials and Clients. (A company fleet vehicle will be provided in such instances.)
• Ability to write comprehensive and detailed narratives and various forms of correspondence.
• Other duties as assigned

Required Skills, Education, and Experience

• Bachelor’s degree from an accredited four-year college or university OR one year of related experience and/or training
  • Equivalent combinations of education and experience may be considered
• Ability to read blueprints and job-related documents.
• Strong knowledge of stormwater, erosion, and sediment control
• Strong knowledge of water and sewer design principles
• Strong verbal and written communication skills
• Able to interpret and apply municipal land use ordinances
• Basic computer skills including MS Office (Outlook, Word, Excel)
• Experience with specific programs including
  • AutoCAD 2017 (or later version)
  • AutoCAD Civil 3D 2017 (or more recent version)
  • Hydraflow
• Driver’s license and clean driving record
• Ability to fit test & utilize appropriate PPE as needed
• Ability to meet physical requirements (movement, lifting, as relevant to job)

Preferred Skills, Education, and Experience

• 2 years of relevant experience and/or training
• Experience using VTPSUHM
• OSHA or other relevant safety certifications

Physical Demands

• Occasionally required to
  • Stand, walk, sit
  • Use hands to finger, handle, feel
• Regularly required to talk and hear
• Vision abilities include
  • Close
  • Distance
  • Color
  • Ability to adjust focus

Work Environment

• Occasionally exposed to outside weather conditions
• Noise level is usually moderate
• Hours regularly exceed 40 hours a week

The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years.

Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K’s strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference.

Final determination on pay will be made by company leadership consistent with the scope of work and considering the candidates’ education, experience, skills, past performance, demonstrated leadership, and influence.

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans’ status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team.

Pre-employment drug testing (EOE)

100% Company-Paid Health Benefits!

PI982637dd9b25-37344-36887994