Engineering Jobs in Gibbstown, NJ

• Competitive salary
• Lead maintenance operations in a high-volume manufacturing facility
• Opportunity to drive reliability improvements and reduce downtime
• Work in a collaborative, unionized production environment
• Influence plant performance across safety, quality, delivery, and cost
  
  

• Lead and coach maintenance technicians to ensure safe, efficient operations
• Drive preventive and predictive maintenance programs to maximize equipment uptime
• Monitor asset performance and analyze reliability data to prevent failures
• Coordinate maintenance schedules with operations, sanitation, and engineering teams
• Ensure compliance with safety, food safety, and GMP standards
• Track maintenance activities and asset history using CMMS/EAM systems
• Develop action plans to reduce downtime, waste, and equipment failures
• Participate in plant performance meetings and implement follow-up improvements
  
  

• Be able to do the job as described
• Strong understanding of reliability fundamentals such as root cause failure analysis and downtime analysis
• Experience using CMMS/EAM systems to track asset performance and maintenance planning
• Knowledge of HACCP, food safety, and GMP standards within a manufacturing environment
• Familiarity with condition-based monitoring tools and predictive maintenance processes
  
  

• Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1.
• Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job.
• Fabricate, weld, and assemble stainless steel components used in bakery production equipment, conveyors, racks, and support structures.
• Perform TIG, MIG, and stick welding on stainless steel, mild steel, and aluminum materials.
• Repair damaged bakery equipment, including mixers, conveyors, ovens, pans, racks, and piping using cutting, burning, and welding techniques and equipment.
• Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage.
• Modify existing equipment to improve production efficiency or meet operational requirements.
• Prepares, assembles, and tacks weld parts and surfaces to be welded.
• Interpret blueprints, schematics, and fabrication drawings to complete projects accurately.
• Ensure all fabricated equipment meets food safety and sanitary welding standards for food manufacturing.
• Grind, polish, and finish welds to maintain hygienic surfaces suitable for food production.
• Work closely with the maintenance and engineering teams to support plant projects and equipment upgrades.
• Maintain welding equipment, tools, and fabrication shop area.
• Follow OSHA safety regulations and food safety policies (GMPs).
• Assist with installation of new bakery equipment and production lines.
• Notifies supervisor when faulty equipment or defective materials are discovered.
• Performs other related duties as assigned.
  
  

• Strong knowledge and experience in TIG welding as well as MIG welding.
• Thorough understanding of machines and tools used in welding including but not limited to designs, uses, maintenance and repair.
• Must have knowledge, experience and ability to weld steel, aluminum and stainless-steel using Arc, Tig, and Mig welding methods.
• Knowledge of metal cutting, grinding, and finishing
• Knowledge of fabrication layouts and measurements
• Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints.
• Excellent ability to read and listen to assignments given in a variety of forms.
• Basic understanding of mathematics as it relates to welding assignments.
• Mechanical aptitude
• Ability to Problem-solve and troubleshoot equipment.
  
  

• High school diploma or GED required.
• Completion of a formal apprenticeship in welding or metal fabrication.
• Minimum 2–5 years welding/fabrication experience, preferably in food manufacturing, bakery, or industrial environments.
• Experience with stainless steel sanitary welding is strongly preferred.
• Ability to read and interpret technical drawings and blueprints.
• Knowledge of GMP, food safety, and sanitary design standards.
• Must be able to weld components that are vertical, flat, or overhead.
• Must have enough manual dexterity and stability as required for precision work.
• Must be able to see details at close range.
• Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.
• May require working nights, weekends, or overtime depending on production needs.
  
  

• Repair and maintain machinery and equipment in accordance with diagrams, operational manuals and manufacturing specifications
• Direct mechanic helpers engaged in repairing and maintaining parts of machinery and equipment
• Diagnosing malfunctions in equipment and machinery based on observation of machinery and applying knowledge from experience.
• Follow operation manuals, manufacturer’s instructions and engineering specifications
• Perform preventive maintenance functions as directed
• Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators to assist with repairs and troubleshooting
• Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown in line with OSHA requirements.
• Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved.
• Interpret specifications, blueprints and job orders to workers
• Anticipate potential problem areas and delegate course of action to be taken
• Know where emergency STOP, and START/STOP buttons are located
• Responsible for following all Lock Out/Tag Out procedures for machine when necessary
• Must be safety conscious
• Maintain a safe and clean working environment by complying with procedures, rules and regulations
• Complete a Food Safety Incident Report if an incident occurs
• Follow all company GMP procedures.
• Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1.
• Willing to work any shift and overtime as required
• Perform all special requests by Lead Mechanic/Maintenance Supervisor/ Maintenance Manager
  
  

Company Description

John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies.

We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards.

John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries.

Job Description

Under general supervision, the Seal Repair Technician is responsible for all processes related to disassembly and assembly of rotating equipment. The Seal Repair Technician follows instruction from a Repair job packet and router to perform DCI (Dismantle Clean and Inspect) and gives a written description of the wear and condition of critical components seal.

This position completes all inspection forms taking pictures of all critical components and uses inspection equipment for proper documentation of the assembly. With assistance identifies, inspects and evaluates material returned, determines repair operations, performs simple shop operations, verify specifications, initiate work and purchase orders.

Receives John Crane parts and materials returned by customers and branch offices. Evaluates from a condition of material, checks current drawing revisions and general product knowledge whether material is repairable or non-repairable.

• Identifies and inspects material returned.
• Ensures all components are properly cleaned and free from foreign material per departmental procedures
• Performs the assembly of the seal once the repair has been released to the shop and all components have been replaced or reconditioned and marked ready for assembly.
• Under close supervision, repairs returned seals and seal parts.
• May perform parts structuring, checks cost structure, and determines price of repair, ensures assembly is structured correctly, and price repair.
• Determines necessary repair operations, ensures BOM (bill of materials) / drawings / repair parts match.
• Performs simple operations on drill press (single spindle), tool post grinder, bead blast polisher and lapping machine.
• Verifies part specifications with measuring instruments such as micrometer, vernier caliper, dial indicator and optical flats.
• May initiates purchase orders for new jobs if vendors are involved.
• Consults with Engineering or Sales departments as necessary.
• Maintains necessary records and small inventory of seal parts used for repair orders.
• Works from factory work orders, prints, rework orders and verbal instructions.
• Assists newer repair personnel as necessary.
• Sets up and troubleshoots lapping machines for repair maintenance.
• May perform direct contact with customers on service and/or phone, checks computer system for credit and address information, price repairs

Qualifications

• High School Diploma or equivalent.
• Experience in mechanical assembly positions
• Experience with mechanical seals is a plus

#Smiths

Additional Information

With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Network, and Neurodiversity.

Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor.

Job Summary:

This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports.

Responsibilities:

Accident prevention actively identify, correct and/or report safety hazards to prevent accidents.

Actively identify and pursue cost reduction and efficiency/profit improvement opportunities.

Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product.

Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff.

Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications.

Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials.

Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests.

Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications.

Determines acceptability or rework by conducting inspections and physical tests of reworked product.

Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based.

Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes.

Contributes to team effort by accomplishing related results as needed.

Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator

Performs other duties as assigned

Must be able to fulfill essential job function in a consistent state of alertness and safe manner.

Why work for Sea Box?

We offer benefits to our full-time employees that include:

• Health Insurance
• Dental Insurance
• Vision Insurance
• Basic and Voluntary Life
• Long-Term Disability
• Flexible Spending Accounts
• Employee Assistance Program
• Paid Time Off
• Paid Holidays, Bereavement, Jury Duty
• 401(k) with company match
• Employee Referral Program

Employees are eligible for most benefits on the 1st of the month following date of hire.

Salary Range: $45,000 - $60,000

Location: This position is onsite (non-remote) at the Companys corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Companys normal 8:30am 5:30pm hours of operation.

Experience: 3-5 years work related experience.

Education: High school diploma or equivalent. ASQ or AWS Certifications helpful.

PI62a13e37c857-26289-39975106

We are seeking a highly motivated Quality Engineer (QE) to join our Quality team.

This role is responsible for ensuring that supplied materials and components meet internal and external requirements for quality and compliance.

The ideal candidate will have hands-on experience with SAP, a strong understanding of outbound logistics and shelf life labeling, and a working knowledge of aerospace quality clauses and industry standards.

Essential Functions: Lead quality assurance activities from onboarding through lifecycle support.

Perform audits, assessments, and root cause investigations for non-conformances.

Collaborate with suppliers to ensure compliance with customer quality clauses and AS9100/ISO9001 standards.

Review and validate shelf life labels, certifications, and documentation for outbound shipments.

Monitor performance and implement corrective actions using 8D, 5-Whys, or similar tools.

Utilize SAP to manage supplier data, track inspections, and process quality notifications.

Coordinate with purchasing, logistics, and engineering teams to resolve supply chain quality issues.

Qualifications: 3 years of experience in a Supplier Quality, Manufacturing Quality, or related role in the aerospace or defense industry.

Proficiency in SAP for quality and supply chain processes.

Familiarity with outbound logistics, labeling requirements, reviewing CoC's, and shelf life management.

Strong understanding of aerospace quality clauses, contracts, and regulatory requirements (e.g., FAA, EASA, DoD).

Excellent communication, organizational, and problem-solving skills.

ASQ Certified Quality Engineer (CQE) or similar certification is a plus.

In compliance with pay transparency requirements, the salary range for this role is $51,132.00-128,970.00.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

d24ad0b8-823f-4e68-a892-2986ccdf7392

Key Role Description

Responsibilities primarily involve day-to-day support of pipeline and terminal process control systems and associated applications, including, but not limited to, distributed regulatory control systems (SCADA and LDS systems), programmable logic controllers (PLCs), and process history data systems. Responsibilities also include support for the control portion of MIPC pipeline and terminal projects and day-to-day technical support to various other departments within the organization including operations, reliability, and IT. Much of the work is project-orientated and requires working on a number of projects and priorities simultaneously.

Role Specific Competencies

At Monroe, we have identified nine specific competencies we expect all leaders of our organization to possess. These competencies are incorporated as a part of our Selection, Performance Management /Review and Developmental processes. The competencies and activities for this role are detailed below:

Technical Knowledge - demonstrates the specific skills necessary for the assignments, understands the background and points of leverage to be effective in the role.

* Responds to the day-to-day needs of MIPC's pipeline and facilities, particularly where those needs are impacted by the process control or process data history systems.
* System Configuration and Administration.
* Databases and Graphical Displays for Control Room Operations
* System interfaces, business data processes, and reporting.
* Work with Regulatory Compliance, Operations, and Reliability and Maintenance Departments on projects to determine points that need to be brought back into the SCADA system when performing SCADA integration of remote field sites.
* Participate in detailed CAT and lineouts testing to meet regulatory requirements.
* Work closely with the IT and third-party SCADA vendor to configure and test communications from the SCADA System to remote PLC's and Flow Computers.
* Work with field personnel in a real-time environment to troubleshoot data problems and communication problems between the remote PLC site and SCADA.
* Work with the pipeline controllers to make sure the SCADA application is always providing them the ability to control the pipeline.
* Develops system application specifications utilizing business knowledge and tests developed programs to ensure proper functionality and implementation
* Provide 24x7 support to the Control Center
* Supports other functions such as:
o Communications troubleshooting (primary and backup)
o MIPC IT support
o Maximo programing liaison
o Leak detection support
o IT/PLC critical spare list development
o Cybersecurity training
o Other systems: TopTech, tank gauge system, Omni Flow Computers

Knowledge of Work Areas and Responsibilities - demonstrates a clear understanding of role and responsibilities within specific area, flexible and agile in adapting to changes or exploring opportunities and challenges.

Communications - Verbal and Written - includes written and verbal communications, delivers presentations and has good listening skills.

Problem Solving and Conflict Leadership - strives to understand contributing factors, works to resolve complex situations, and helps individuals to resolve conflicts.

Delivering Results - Sense of Urgency - defines appropriate goals, works toward achieving goals, articulates vision and steps for achievement, meets deadlines and provides timely status updates and follow-through.
* Responsiveness to off-hours, weekends and holidays issues may be required.

Teamwork/Cooperation - accountable to team, works to meet established deliverables, appreciates view of team members and is respectful of others.

Initiative - takes action, seeks new opportunities, and strives to see projects to completion.

Work Reliability/Quality - strives to eliminate errors, accurate work is a priority, and seeks opportunities to improve product/services.

Integrity and Trust - honest, accountable, upholds ethics standards and maintains confidentiality.

Education, Experience, and Skill Requirements

* Bachelor degree in Computer Science, Engineering or equivalent. Experience will be considered in lieu of degree.
* 2-5 years of experience with SCADA/PLC systems
* Gas, and/or Liquids pipeline experience preferred with a working knowledge of measurement technologies, process control automation, device protocols, networking, and telecommunications.
* Strong problem solving, technical, and functional skills with the ability to multi-task.
* Detail-oriented with strong analytical and troubleshooting skills and be willing to learn.
* A working knowledge of real-time systems, particularly SCADA systems or PLCs and RTUs is preferred.
* Solid Microsoft skills with an emphasis in advanced Excel. Pluses include; SQL and Microsoft development tools .Net and Visual Studio.
* A basic understanding of pipeline hydraulics.
* A basic understanding of PLC and RTU communication protocols and TCP/ IP communications.
* SCADA application with remote site integration experience.
* Familiarity with PHMSA Control Room Management (CRM) processes and guidelines.

65 % Inside Work 35% Outside Work 5 % Extreme Temperatures
10 % Excessive Noise 90 % Sitting 10 % Standing
90 % Operating Computer 20 % Lifting 40 lbs. 10 % Traveling
10 % Exposure to Hazards

Key Role Description

The Metals Supervisor leads the mechanics and support crafts responsible for maintaining fixed equipment in the refinery. This includes, but is not limited to heaters, boilers, ducting, vessels, piping, valves, and structural steel. This role oversees union metals mechanics, contractors (union and non-union), and outside shops to successfully complete their tasks in a safe and cost-effective manner. The Metals Supervisor assures all maintenance work complies with applicable safety, engineering, safe work practice standards, laws, and regulations.

Role Specific Competencies

At Monroe, we have identified eleven specific competencies we expect all leaders of our organization to possess. These competencies are incorporated as a part of our Selection, Performance Management/Review and Developmental processes. The competencies and activities for this role are detailed below:

Technical Knowledge - demonstrates the specific skills necessary for the assignments, understands the background and points of leverage to be effective in the role.

• 
  
  
• Conduct morning tool box talks with work crews
  
  
• Directs the daily activities of metals mechanics, metals contractors, and support crafts in maintaining refinery equipment and facilities
  
  
• Achieves high levels of craft productivity through improved performance; solving problems, reliability and reducing costs.
  
  
• Review Weekly Schedule and work packages for every job and provide to work crews. Communicate changes as required
  
  
• Execute the Daily and Weekly Maintenance Schedules and communicate with Scheduler for any changes
  
  
• Prepare & Lead Pre-Job Meetings
  
  
• Adhere to the break-in work process and handle all Emergency / Break-In work as required
  
  
• Follow job plans and communicate with Planner for needed changes
  
  
• Provide Planner feedback for any planning deficiencies (Missed steps, materials, Man-hours, etc.)
  
  
• Perform follow-up rounds with crews, both Monroe and contractor, regularly throughout shift (no greater than every two hours) Items to be evaluated include:
  
  

• 
  
  
  • 
    
    
  • Following safe work practices
    
    
  • Barriers to success
    
    
  • Any required help to the crew
    
    
  • Job progress
    
    
  • Crew size and productivity
    
    
  • Work package available and job plan being followed
    
    
  
  
  
• Enforce start, stop & break times
  
  
• Work with others at peer level to ensure quick and efficient resolution to issues
  
  
• Elevate issues promptly to Leadership when required
  
  
• Confirm job plan steps in Maximo daily before 2:30 schedule meeting.
  
  
• Review following week's schedule and provide feedback by end of shift Thursday before final version
  
  
• Provide daily updates on all work under your supervision - accurate communication of end of shift status
  
  
• Communicate status of on-going work with Operations and OMC
  
  
• Arrange overtime & off-hour coverage for employees and contractors as required
  
  
• Support reliability improvements
  
  
• Support on-call maintenance system as needed throughout the year
  
  

Knowledge of Work Areas and Responsibilities - demonstrates a clear understanding of role and responsibilities within specific area, flexible and agile in adapting to changes or exploring opportunities and challenges.

• 
  
  
• Attends the daily scheduling meeting to communicate effectively with other Maintenance departments and Operations to resolve any scheduling issues, priority changes, and any problems between Crafts, Operations, Maintenance and other departments.
  
  
• Consults with the Fixed Equipment Reliability Engineering group to improve reliability and ensure that maintenance work meets the requirements of mechanical, process, metallurgical and environmental codes, policies and standards.
  
  
• Attends the daily morning maintenance and operations meeting to discuss any schedule breakers for the day and coordinate with other maintenance crafts on any exceptions to the daily schedule.
  
  
• Initiates requisitions for required materials, tools and contractor services as required including tool room materials.
  
  
• Reviews and approves employee's time.
  
  
• Knows and consistently applies company policies, procedures and the collective bargaining agreement.
  
  

Communications - Verbal and Written - includes written and verbal communications, delivers presentations and has good listening skills.

Problem Solving and Conflict Leadership - strives to understand contributing factors, works to resolve complex situations, and helps individuals to resolve conflicts.

Delivering Results - Sense of Urgency - defines appropriate goals, works toward achieving goals, articulates vision and steps for achievement, meets deadlines and provides timely status updates and follow-through.

Teamwork/Cooperation - accountable to team, works to meet established deliverables, appreciates view of team members and is respectful of others.

Initiative - takes action, seeks new opportunities, and strives to see projects to completion.

Work Reliability/Quality - strives to eliminate errors, accurate work is a priority, and seeks opportunities to improve product/services.

Integrity and Trust - honest, accountable, upholds ethics standards and maintains confidentiality.

Leadership Capability - provides strong leadership, sets a good example, skilled decision maker, motivator and encourager.

People Development/Coaching - offers feedback, coaches employees appropriately, rewards employees wisely, takes mentoring role, challenges and develops employees and offers opportunity.

• 
  
  
• Interacts with direct reports on a daily basis to ensure clear and open communications; alignment with goals and objectives; and to proactively address progress, concerns and questions.
  
  

Education, Experience, and Skill Requirements

Minimum Qualifications:

• 
  
  
• 5 years of maintenance supervisory experience in a high-risk industry such as refining, petrochemical, or chemical processing.
  
  
• High School Diploma or equivalent experience required; AA or BS Degree preferred.
  
  
  • 
    
    
  • Proficient with Microsoft Word, Outlook, and Excel as well as CMMS software.
    
    
  • Demonstrated proficiency in all of Role Specific Competencies.
    
    
  
  
  

Key Role Description

The Pipeline Engineer sustains project management and integrity management for reliable operations in compliance with all Federal and State Pipeline Regulations of all pipeline and facility assets. Performs front end studies, cost estimates, detailed design, and construction support of gathering and transmission pipelines & tanks in the MIPC system. Assumes responsibility for pipeline engineering and project management including scope, estimates, schedule and budget. Reviews all proposed construction on the pipeline Right-of-Way and corresponds with property owners. Maintains pipeline GIS system and integrity program. Responsible for the pipeline capital and expense projects, budgeting and forecasting. Maintains and promotes a focus on MIPC's final deliverables and maintains effective communications with other refinery engineering teams.

Role Specific Competencies

At Monroe, we have identified eleven specific competencies we expect all leaders of our organization to possess. These competencies are incorporated as a part of our Selection, Performance Management/Review and Developmental processes. The competencies and activities for this role are detailed below:

Technical Knowledge - demonstrates the specific skills necessary for the assignments, understands the background and points of leverage to be effective in the role.

• 
  
  
• Ensures compliance with federal, state and local regulations, company policy and required integrity inspections and follows/contributes to pipeline industry best practices
  
  
• Sets the example for safety excellence including element owner in MIPC's Pipeline Safety Management System (PSMS), risk management, follow-up and closure of action items, leveraging learnings across the organization.
  
  
• Manages MIPC project work from the development stage through completion to ensure customer satisfaction. Includes project development, bidding, permits, land owner notifications, easements, technical clarifications, contractor oversite, budgeting / forecasting, management of change (MOC), field implementation, inspection oversite and project documentation closure.
  
  
• Owner of the Geographic Information System (GIS) and responsible for the Tech department's updates utilizing previous Risk studies, Field Investigation Reports (IFR's), Cathodic Protection (CP), Integrity, High Consequence Area (HCA) data, Environmental and many other inputs.
  
  
• Assumes budgeting stewardship of OpEx/CapEx as well as interfacing with marketing and general project management oversight.
  
  
• Prepares and maintains design basis and assist with the project planning, scheduling, manpower estimates; Prepares cost estimates including material, equipment, and labor costs.
  
  
• Develops specifications and drawings for construction, utilizing engineering practices, standards, codes and procedures.
  
  
• Prepares bid documents for material, equipment, and construction.
  
  
• Prepares material and equipment requisitions and review vendor drawings and bids to determine compliance with specifications.
  
  
• Consults with construction personnel, concerning design constructability as related to field conditions, sequencing and scheduling of construction activities.
  
  
• Interfaces with the client's technical personnel on specific project design items or tasks
  
  
• Responsible for all equipment design documentation and manages reliability engineering efforts at the Pipeline.
  
  
• Provide technical support and observation services during design and construction.
  
  
• Responds to all Design One Calls submitted to MIPC.
  
  
• Interacts frequently with MIPC Operation, Maintenance & Tech/Regulatory Leads, with key technical and industry trade associations to establish best practices and ensure the facilities are in compliance with all applicable regulations, including participation in trade committees and/or teams.
  
  
• May function with responsibility for monitoring work activities of a project team and ensuring that all project work is performed in accordance with Company procedures.
  
  
• Provides recommendations for system operational improvements through submission of capital and expense projects as part of the annual budgeting process and performs budget re-forecasting as appropriate. Maintains long-term capital budget.
  
  
• Participates in ALL Emergency Response activities, is IC-300 trained (or able to acquire said training w/ MIPC), participates in IC responses and exercises and capable of acting as Planning Section Chief during an incident 24/7/365, or other roles as/where needed.
  
  

• 
  
  
• Leads and promotes a safety culture by ensuring emergency and safety procedures, policies, documentation procedures and equipment operating parameters are within all applicable regulations (DOT and PSMS).
  
  

Knowledge of Work Areas and Responsibilities - demonstrates a clear understanding of role and responsibilities within specific area, flexible and agile in adapting to changes or exploring opportunities and challenges.

Communications - Verbal and Written - includes written and verbal communications, delivers presentations and has good listening skills.

Problem Solving and Conflict Leadership - strives to understand contributing factors, works to resolve complex situations, and helps individuals to resolve conflicts.

Delivering Results - Sense of Urgency - defines appropriate goals, works toward achieving goals, articulates vision and steps for achievement, meets deadlines and provides timely status updates and follow-through.

Teamwork/Cooperation - accountable to team, works to meet established deliverables, appreciates view of team members and is respectful of others.

Initiative - takes action, seeks new opportunities, and strives to see projects to completion.

Work Reliability/Quality - strives to eliminate errors, accurate work is a priority, and seeks opportunities to improve product/services.

Integrity and Trust - honest, accountable, upholds ethics standards and maintains confidentiality.

Minimum Qualifications:

• 
  
  
• Minimum of 5 years' pipeline experience in a high-risk industry.
  
  
• Bachelor's degree in a technical discipline or equivalent project and/or engineering work experience
  
  
• Proficient in Microsoft Office products; prior experience with Maximo & GIS System preferred.
  
  
• Demonstration of successful completion (schedule/cost) of small and/or mid-cap projects
  
  
• Demonstrated proficiency in all of Role Specific Competencies.
  
  

• Strategic Leadership:
  • Able to define a vision for a site of approximately 200 staff members, including the development of a 3 to 5 year operating plan
  • Prior experience managing responsibility of the P&L and balance sheet for a manufacturing site.
  • Deliver annual revenue, profit, EBITDA, and cash targets through effective P&L management.
  • Execute capital projects on average of +$10M to ensure facilities, equipment, and systems meet production demand and compliance requirements.
  • Develop and execute site master plan which includes building talent capabilities that results in the site meeting branded large pharma industry standards to facilitate new business.
• Regulatory & Compliance:
  • Ensure strict adherence to cGMP, FDA, and DEA regulations for controlled substances.
  • Maintain FDA audit readiness and compliance with OSHA, EPA, DEA and other regulatory agencies.
• Process Excellence & Operational Performance:
  • Drive process improvement initiatives, lean manufacturing, and digital transformation to optimize throughput and reduce costs.
  • Assess site operations and drive execution of cost reduction initiatives to improve productivity and profitability of products
  • Implement best practices for manufacturing
  • Deep understanding in Process Safety Management, Environmental understanding, including wastewater treatment plant operations and security programs.
  • Oversee ERP and compliance systems (including D365) for operational efficiency.
• Commercial & Customer Focus:
  • Partner with Commercial teams to define and execute strategies for revenue growth and customer satisfaction.
  • Ensure timely delivery of products in compliance with regulatory requirements.
• People Leadership:
  • Recruit, develop, and retain high-caliber talent through succession planning and performance management.
  • Demonstrates deep understanding on cultural transformation
  • Foster a culture of engagement, accountability, and continuous improvement.
• Business Development:
  • Enable the site to deliver late -phase/commercial CDMO programs that include the acquisition of new customers, tech transfer and scale up production.
  • Participate in strategic initiatives including market expansion, technology alliances, and evaluation of new products.
  • Support acquisition and rationalization activities as needed.
    
    

• Bachelor’s degree in Chemical Engineering, Chemistry, Pharmaceutical Sciences, or related field (advanced degree preferred).
  
  

• 15+ years in API small molecules pharmaceutical manufacturing leadership roles, with proven expertise in cGMP, FDA, and DEA compliance for APIs and controlled substances.
• Proven experience in generics manufacturing with knowledge and capabilities to meet big pharma branded business.
• Demonstrated success in operational turnarounds, quality remediations, or start-up of manufacturing facilities.
• Strong background in process optimization and continuous improvement methodologies.
  
  

• Exceptional leadership, communication, and change management skills.
• Detail oriented, advance analytical capabilities and high learning agility
• Ability to manage complex operations and deliver results in a dynamic environment.
• Understanding transactional process improvements
• Understand how to develop and implement operating mechanism and meeting structure to manage operations at the site, including the definition and implementation of KPIs and tier meetings.
  
  

• Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies.
• Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs.
• Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs.
• Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you do not meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team.
  
  

Company Description

Battaglia Electric, Inc. specializes in electrical contracting, telecommunications, security, audio-visual (AV), and distributed antenna systems (DAS) installations. With over 30 years of experience, Battaglia is committed to delivering manufacturer-certified installations while ensuring safety, quality, and customer satisfaction. We work across diverse industries, including corporate, utility, data center, healthcare, transportation, and higher education, offering services for projects ranging from under $5 million to over $40 million. Our expert team focuses on developing and maintaining long-term relationships by delivering reliable and efficient solutions on time and within budget. The company is based in New Castle, Delaware, and provides comprehensive electrical and power services, including installation, maintenance, and emergency restoration.

Role Description

This is a full-time, on-site role for an Assistant Project Manager located in Essington, PA. The Assistant Project Manager will assist in overseeing project timelines, budgets, and deliverables to ensure successful project execution. Key responsibilities include expediting project components, assisting in logistics management, coordinating inspections, supporting project documentation, and ensuring all work meets quality and safety standards. The role demands effective collaboration with various teams to achieve project goals seamlessly.

Qualifications

• Proficiency in Expediting and Logistics Management
• Strong skills in Project Management, including organization and prioritization
• Familiarity with Inspection and quality assurance processes
• Understanding of team coordination and progress monitoring
• Excellent communication and interpersonal abilities
• Proven attention to detail and problem-solving skills
• Bachelor’s degree in Electrical Engineering or equivalent experience preferred
• Experience in the electrical or related industries is a strong advantage

• Supervises the caliber of treatment and care of the patients.
• Directs the staffing and administration of a nursing unit or floor.
• Facilitates a team culture that encourages and rewards excellence in patient care.
• The Nurse Manager is a registered nurse who manages the financial, human, and other resources for the provision of quality patient care for an assigned area over a twenty-four hour period.

• Master's Degree in Nursing; Nursing Administration preferred
• Registered Nurse in the state of Pennsylvania required.
• Three (3) years of nursing experience, including hospital clinical practice experience required.
• Basic Life Support (BLS) required
• 7 years of OR experience strongly preferred.
• CNOR certification preferred or within one year of hire.
• Previous leadership experience required.

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See Jefferson Health Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

• Collaborate with the Director of Nursing Education and Professional Development (NEPD), Clinical Directors, Clinical Educators, Clinical Nurse Specialists, Nurse Managers and Assistant Nurse Managers to assess, plan, implement and evaluate orientation, in-service education, continuing education, and competency programs for predominantly Patient Care Technicians (PCTs) and occasionally to professional nursing staff.
• Serves as a clinical resource to PCTs and professional nursing staff to integrate and maintain standards of care and collaborate with nursing leadership to develop unit based clinical competencies.
• This position requires providing service to the following age population(s), young adults to frail elderly, depending on the assigned specialty, in a manner that demonstrates an understanding of the functional/developmental age of the individual served.

• Licensed as a Registered Nurse in Pennsylvania.
• MSN preferred.
• American Heart Association BLS required.
• Specialty Certification preferred.
• Minimum of three years of nursing experience in an acute care setting required, care of the adult patient preferred.
• Demonstrates competency in teaching/learning process, organizational skills, and computer literacy.
• Demonstrates expert clinical, communication, and teaching skills.
• Ability to manage multiple responsibilities and to work independently.
• Must be able to work rotating shifts.

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See Jefferson Health Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

• Oversee automation and control system design activities for assigned projects.
• Develop controls sections of User Requirement Documents (URDs).
• Analyze safety instrumented systems and design safety-rated interlock systems.
• Prepare Requests for Proposal (RFPs) for controls-related project work.
• Manage external contractors to ensure on-time, on-budget project delivery.
• Own all plant-level control architectures, programming, and documentation.
• Serve as the site expert for control systems to ensure effective in-house troubleshooting and updates.
• Participate in ongoing process improvement initiatives.
• Maintain and update all automation and control system hardware and software documentation.
• Maintain control system backups, recovery systems, and procedures.
• Apply cGMP requirements to all job functions and ensure compliance in all documentation.
• Support audit readiness and participate in FDA, regulatory, and customer audits as required.
• Perform other duties as assigned based on skills and business needs.
  
  

• Bachelor’s degree in Electrical Engineering, Chemical Engineering, or a related field with at least 2 years of relevant experience, or 7+ years of practical experience in lieu of a Bachelor's degree.
• Experience in process control and automation.
• Proficiency in Microsoft Office (Outlook, Word, Excel).
• Ability to read and interpret repair manuals, specifications, drawings, and schematic diagrams.
• Excellent communication and interpersonal skills.
• Strong organizational skills and attention to detail.
• Good technical writing skills.
  
  

• Experience with technical concepts, practices, and procedures in bulk pharmaceutical or chemical manufacturing.
• Experience in the operation, maintenance, troubleshooting, and programming of DeltaV Distributed Control Systems and Allen Bradley PLC systems.
  
  

• Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies.
• Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs.
• Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs.
• Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don’t meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team.
  
  

Position Description

Ryder is hiring a Senior Level Diesel Technician in Woolwich Township, New Jersey — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $30.50 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 2:30 pm – 11:00 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Woolwich Township” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 week ago (3/11/2026 1:05 PM)

Requisition ID 2

Location (Posting Location) : State/Province NJ

Location (Posting Location) : City WOOLWICH TOWNSHIP

Location (Posting Location) : Postal Code 08085

Category Technicians/Service Employees5

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $30.50/Hr.

Max Pay USD $30.50/Hr.

A family-owned business since 1924, A. Duie Pyle provides a range of integrated transportation and distribution solutions throughout the Northeast and Mid-Atlantic. Supported by our vast network of Less-Than-Truckload (LTL) service centers, warehouse facilities, and dedicated locations, we have the ability to offer flexible and seamless integrated solutions tailored to our customer's needs.

Simply put, when it comes to integrated supply chain solutions, Pyle People Deliver. Our promise is to provide outstanding service as it remains to be our first and foremost mission.

Position Summary:

We are seeking a Senior Data Architect to lead the design, modernization, and operational excellence of our enterprise data platform. This role blends hands on data architecture with cloud and on prem platform engineering, reliability, and DevOps practices.

The ideal candidate brings deep experience designing scalable data solutions, modernizing database environments, implementing automation and CI/CD pipelines, and driving platform reliability across mission critical systems. This role requires both strategic architectural thinking and hands on implementation across cloud services, relational databases, automation tooling, and enterprise system integrations.

The responsibilities of the position include, but are not limited to:

Data Platform Architecture & Modernization

• Architect scalable, secure, and high availability data platforms across cloud/hybrid environments
• Designing and overseeing database modernization initiatives (e.g., On-prem SQL server to managed services such as RDS or equivalent)
• Defining data storage strategies across relational and operational systems
• Establishing standards for availability, resilience, performance optimization, and cost efficiency
• Producing architectural diagrams and documentation to guide implementation and long-term platform strategy

Data Ingestion & Integration

• Designing and implementing scalable ingestion pipelines across enterprise systems
• Developing ingestion and transformation logic using SQL and Python
• Supporting integration patterns across APIs, batch systems, and event-driven architectures
• Designing monitoring and alerting mechanisms to ensure ingestion reliability and observability
• Enabling data availability for analytics and operational reporting without compromising system performance

Cloud & Infrastructure Engineering

• Architecting and managing cloud-based data services
• Designing monitoring frameworks using tools such as CloudWatch, New Relic, or equivalent
• Optimizing cloud infrastructure costs while maintaining performance and reliability
• Supporting secure access patterns, identity management, and operational governance

DevOps & Platform Reliability

• Implementing CI/CD pipelines for data and database deployments (Azure DevOps or similar)
• Establishing version control and automated deployment standards for data environments
• Improving SDLC processes for database and data platform releases
• Ensuring high system availability (99.9%+ targets) and proactive incident management
• Supporting incident response processes and RCA for data related systems and/or outages

Database Architecture & Performance Optimization

• Designing relational database schemas for scalability and performance
• Clearly define and implement indexing, partitioning, and query optimization standards
• Implementing backup, disaster recovery, business continuity and high availability strategies
• Guiding database tuning and performance monitoring practices

Governance & Technical Leadership

• Establishing data architecture standards and naming conventions
• Driving platform documentation and operational best practices
• Partnering with application, infrastructure, and analytics teams
• Serving as technical authority across data centric initiatives
• Mentoring engineers through design reviews and architecture governance

To be qualified for this position, you must possess the following:

• 8+ years of experience in data architecture, cloud engineering, or platform focused roles
• Strong experience with designing, implementing, and maintenance of data solutions across on-premises and cloud platforms (Snowflake/Databricks/MS Fabric, and SQL Server)
• Advanced SQL proficiency and strong Python coding skills
• Proven experience modernizing enterprise database environments
• Experience implementing CI/CD pipelines for data platforms, preferably Azure DevOps
• Strong understanding of database performance tuning and availability design
• Experience designing systems for high availability and operational reliability

The following skills are preferred, but not required:

• Experience with CDC, streaming, or event-driven ingestion architectures is a plus
• Familiarity with enterprise CRM (Salesforce, home grown) or billing platforms (Great Plains, Dynamics) and data integration across these as data sources into a cloud DWH
• Experience with Elasticsearch or similar search/indexing platforms
• Knowledge of cost optimization in data cloud environments – across storage, usage and data accessibility
• Experience working in highly regulated or operationally critical industries, influencing data governance principles and industry best practices

For a full job description associated with this posting, please contact A. Duie Pyle's Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications.

We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

• Professionally and systematically defines, designs, develops, monitors, and refines an asset maintenance plan that includes:
  • Value-added preventive maintenance tasks for new and existing equipment.
  • Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems.
• Develops and provides input to a risk management plan that will anticipate reliability-related and non-reliability related risks that could adversely impact plant operations.
• Participates in the development of criteria for and evaluation of equipment and technical MRO suppliers and technical maintenance service providers.
• Develops engineering solutions to repetitive failures and all other problems that adversely affect plant operations. These issues may include capacity, quality, cost or regulatory compliance issues. To fulfill this responsibility, the reliability engineer applies data analysis techniques that could include:
  • Reliability modeling and prediction
  • Fault tree analysis
  • Six Sigma methodology
  • Root cause analysis (RCA) and root cause failure analysis (RCFA)
  • Failure reporting, analysis and corrective action system (FRACAS)
• Works with Production to perform analyses of assets including:
  • Asset utilization
  • Equipment effectiveness
  • Remaining useful life
  • Other parameters that define operating condition, reliability and costs of assets.
• Provides technical support to maintenance personnel.
• Participates in the development of design and installation specifications along with commissioning plans and participates in the final commissioning of new installations.
• Applies value analysis to repair/replace, repair/design and make/buy decisions.
• Carry out any other duties which are within the employee’s skills and abilities whenever reasonably instructed.
  
  

• BS/MS in Mechanical Engineering, Reliability Engineering, or equivalent degree.
• Minimum of 5 years of maintenance and reliability, production management, engineering or operations experience.
• Experience with and a thorough understanding of technical concepts, practices and procedures in bulk pharmaceutical manufacturing, and related support systems.
• Strong knowledge of preventive maintenance programs and the tools associated with failure detection (i.e. vibration analysis, oil monitoring and thermography) as well as the software associated with them.
• Working knowledge of Computerized Maintenance Management Systems.
• Experience working with Microsoft Office (Outlook, Word, Excel, Project, and Visio)
• Ability to read and understand repair manuals, specifications, drawings, and schematic diagrams.
• Excellent communication and interpersonal skills.
• Excellent organizational skills and detail oriented.
• Good technical writing skills
• Must be able to work independently with minimal supervision.
• Lean/Six Sigma experience.
  
  

• Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies.
• Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs.
• Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs.
• Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don’t meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team.
  
  

Job Description

The position will be responsible to provide site safety leadership, ensure facility compliance with company’s safety standards, implement safety directives, improve safety performance, and ensure facility safety policies and procedures are aligned with governmental regulations. This position will also be responsible for Environmental efforts, overseeing Occupational Health and Safety.

Job Duties

• Incident/Exposure Reporting and Investigation. Manager and implement the Incident/Exposure Reporting and Investigation program. Ensure the program prescribes methods and practices for reporting and investigating incidents.
• Worker’s Compensation Claim Management, in partnership with Human Resources. Review, monitor, and manage the claims process. Manage the early return to work and modified duty program, monitor and analyze accident and injury trends, identify areas of increased training and emphasis of incident prevention.
• Emergency Action Plan. In conjunction with facilities and engineering, ensure company’s EAP is current and implemented. Ensure appropriate individuals are trained in the processes and procedures should the plan be activated.
• Ensure and coordinate all forklift drivers, machine operators, sanitation workers, mechanics, DOT drivers are licensed accordingly, trained and with compliance.
• Maintain companies Personal Protective Equipment, Machine Safety & Equipment usage, Lockout/Tagout, Hazardous Communication etc. are communicated to employees accordingly, and training is performed as required.
• Ensure Record Keeping and Posting Requirements documentation are maintained per mandated record retention regulations.
• Coordinate monthly meetings.
• Perform weekly/monthly/quarterly inspections of both plant facilities and report any and all concerns to management.
• Works with Human Resources Management to conduct monthly employee committee meetings.

Work & Qualification Requirements

• 7+ years of progressive safety experience
• Excellent verbal and written communication skills
• Thorough knowledge of applicable regulations (OSHA)
• Creativity, innovation and the ability to solve problems and generate viable solutions.
• Must have good time management skills and be able prioritize duties.
• Bilingual in English and Spanish is preferred but not required.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.