Engineering Jobs in Fraser Michigan Remote

Electrical Systems Engineer

Location: Madison Heights, Michigan

Salary Range: $125,000/year to $140,000/year; The salary may be negotiable based on experience, education, geographic location, and other factors.

Job Summary

This position leads the design and development of electrical control systems for vehicle applications, bridging customer requirements with technical solutions. The role combines electrical engineering, embedded software development, and systems integration expertise to deliver tested, production-ready control systems while maintaining direct customer engagement throughout the development lifecycle.

Job Functions:

• Capture and document customer system/hardware/software requirements
• Design and develop system wiring, including wiring schematics, conductor, connector and terminal selection
• Specify, design and develop control system electronics hardware, sensors, and actuators
• Design, develop, and verify software and control algorithms to meet requirements
• Perform data analysis and system control tuning/calibration
• Perform system testing and troubleshooting, ensuring a control system meets requirements
• Effectively interface with co-workers and customers in meetings

Minimum qualifications:

Bachelor's degree in electrical engineering, computer engineering, mechanical engineering, or computer science

• Minimum 5 years of post-graduate working experience in controls (automotive or military vehicle level preferred)
• Experience with at least one of the following software languages: MATLAB/Simulink/State flow, C, or C++
• Experience with CANbus, Serial, and Ethernet communications
• Ability to read, understand and create electrical schematics, and a good understanding of electrical and electronics basics
• Excellent verbal, written, and interpersonal skills, including the ability to write concise technical reports
• Initiative to work independently and handle several assignments simultaneously
• Able to manage time to ensure projects are completed by deadline
• Ability to independently absorb new technical assignments
• Must be willing to support limited travel
• US Citizen

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at

Equal Opportunity Employer/Veterans/Disabled

Benefits offerings include but are not limited to:

• 401(k) with match
• Medical insurance
• Dental Insurance
• Vision assistance
• Paid Time Off

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

Key Responsibilities

• Develop and support the design of exterior components and assemblies from concept through production using CAD. Ensure designs meet functional, aesthetic, and manufacturability requirements.
• Manage the release of production-ready parts, drawings, and Bills of Material (BOM) through PLM systems such as Teamcenter while supporting program milestones and engineering documentation.
• Work closely with suppliers on feasibility, design for manufacturing (DFM), tooling development, and technical reviews to ensure parts meet cost, quality, and timing targets.
• Support validation activities including DVP&R development, testing coordination, and design verification to ensure components meet durability, fit, finish, and performance standards.
• Partner with Styling, Studio, Manufacturing Engineering, CAE, and Program Management teams to ensure exterior components align with vehicle styling intent and production requirements.
• Support DFMEA development and manage engineering changes (ECR/ECO) to resolve design issues and improve product quality throughout the development cycle.
• Provide engineering support during prototype builds, pilot builds, and production launch to address fit, finish, and assembly concerns.

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or a related engineering discipline.
• 3–8+ years of experience in automotive exterior trim design, development, or release engineering.
• Experience using CATIA V5/V6, or similar CAD software for 3D modeling and design development.
• Understanding of plastic injection molding, composite materials, tooling development, and painted exterior components.
• Experience with GD&T, DFMEA, DVP&R, and PPAP processes.
• Familiarity with automotive regulatory requirements such as NHTSA and FMVSS related to exterior vehicle components.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

Plans and oversees engineering activities and projects within the department. Develops and directs teams to design, optimize, and implement new manufacturing processes and equipment into production. Drives continuous improvement efforts in process design, cost savings, quality improvements, and resource utilization.

Job Responsibilities and Essential Duties:

• 
  
• Responsible for engineering projects, incorporating newest manufacturing technologies & methods, resolving engineering problems, and improving existing manufacturing processes/equipment.
  
• Responsible for upstream equipment qualification deliverables (URS, FAT, SAT, etc.).
  
• Prioritize and communicate project priorities based on current business needs.
  
• Responsible for achieving product quality, productivity, and standard cost goals.
  
• Maintain compliance with all regulatory standards for product and personnel safety.
  
• Guide, direct, and coordinate facility moves, process transfers, and new equipment installations ensuring improved product quality, manufacturing efficiencies, production yields, and reduce product costs.
  
• Support nonconformance investigation.
  
• Responsible for identification and communication with external machine builders and systems integrators.
  
• Support manufacturing objectives as specified by the management team by promoting investigation, inventiveness, creativity and solutions to various process, implementation, and material flow/control problems.
  
• Communicate new ideas, technology advances, and opportunities to management team for review, evaluation and action.
  
• Responsible for developing and maintaining department expense and capital budget(s).
  
• Create and maintain a safe environment. Ensure legal requirements and safety policies are enforced.
  
• Assist in special projects as needed.
  
• Contributes to team effort by accomplishing related duties as requested.
  

Required Knowledge, Skills and Abilities:

• 
  
• Ability to work with flexible and changing production schedules.
  
• Must be able to collaborate effectively with others, and work well within cross-functional teams and across multiple sites, as applicable.
  
• Self-motivated and have the ability to manage projects and problem solve on a regular basis.
  
• Highly organized with strong project management and technical abilities.
  
• Demonstrated ability to develop strategies that will help build a positive manufacturing environment.
  
• Ability to communicate with machine builders and system integrators.
  
• Strong negotiation skills required.
  
• Strong computer skills, including MS Office applications (Word/Excel) are required.
  

Minimum Requirements:

• 
  
• Bachelor's degree in Engineering, Industrial Management, or related field or equivalent.
  
• Minimum 10 years of experience within a manufacturing or process development environment, preferably within the Medical Device Industry.
  

Quality Requirements:

Build Quality into all aspects of their work by maintaining compliance to all quality requirements.

• 
  
• Ensure compliance to all FDA and Worldwide Quality & Compliance regulations (As applicable to the job function).
  
• Must have the education and experience to understand and comply with U.S. and Worldwide medical device regulations (As applicable to your job function).
  
• Attend all required Quality & Compliance training at the specified interval.
  
• Adopt the "Beyond Compliance Quality Culture" in the work environment; always meet and exceed requirements.
  

Environmental/Safety/Physical Work Conditions:

• 
  
• Ensures environmental consciousness and safe practices are exhibited in decisions.
  
• Duties are performed in an office/manufacturing/warehouse environment. May require the use of personal protective equipment as dictated by the work area.
  

The physical demands described here are a representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The salary range for this position is between $94,000-$118,000/annually depending on experience and location, with a 5% STIP bonus

#LI-MV1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The R&D Test Engineer is responsible for being the lead in development of test methodology and test plan development supporting the verification and validation testing for medical devices, including improvements. This position will also support the authoring and execution of test protocols. This position is an individual contributor role.

Job Responsibilities and Essential Duties:

• 
  
• Translate Design Requirements into Design Verification and Validation (V&V) Testing
  
• Own Test Method Validation (TMV) for novel testing approaches
  
• Design test setup and methodology for product testing
  
• Own novel complex protocol development
  
• Lead test failure investigations and document deviations
  
• Chair cross-functional reviews for protocols, test reports, and deviations
  
• Research different test methods and standards
  
• Advise and support improvements to verification and validation SOPs and tools
  
• Write work instructions, protocols, reports
  
• Perform other product development and laboratory tasks on an as-needed basis
  

Required Knowledge, Skills and Abilities:

• 
  
• Meet the qualifications of the job through education, training, or prior experience
  
• Experience with current industry practices for performing and documenting verification
  
• Ability to communicate within the discipline and with others who are perhaps not as technically trained
  
• Ability to work collaboratively with others and share deliverable responsibilities among the team
  
• Work in an organized, methodical manner
  
• Excellent written and oral communication skills
  
• Adequate computer skills (Microsoft Office Suite)
  
• Able to take precise measurements
  
• Able to solve problems
  
• Able to troubleshoot
  
• Able to analyze & interpret data
  

Minimum Requirements:

• 
  
• Bachelor's degree in R&D or Engineering preferred
  
• 3-5 years' experience in R&D or related field
  

Quality Requirements:

Build Quality into all aspects of their work by maintaining compliance with all quality requirements.

• 
  
• Ensure compliance with all FDA and Worldwide Quality & Compliance regulations (As applicable to the job function).
  
• Must have the education and experience to understand and comply with U.S. and Worldwide medical device regulations (As applicable to your job function).
  
• Attend all required Quality & Compliance training at the specified interval.
  
• Adopt the "Beyond Compliance Quality Culture" in the work environment; always meet and exceed requirements.
  

Environmental/Safety/Physical Work Conditions:

• 
  
• Use of computer and telephone equipment and other related office accessories/devices to complete assignments
  
• Able to lift to 15 lbs.
  
• Ability and willingness to travel to outside test labs to execute/support any offsite lab testing activities
  
• Wear face masks and PPE wherever required.
  
• Integrate environmental considerations into all aspects of work and maintaining compliance to all environmental, health, and safety requirements
  
• Ensure review of all processes and activities for potential environmental improvements and implement necessary changes as applicable to the job function.
  
• Must have general understanding, at a minimum, of Getinge Environmental Policy.
  
• Consider environmental legislation and regulations as a minimum requirement
  
• May require sitting or standing for long periods of time depending on the project.
  

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

$90,000-$105,000/annually + 4% STIP

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.