Engineering Jobs in Endicott Broome County, NY

WHO WE ARE

Delta Engineers, Architects, & Surveyors (Delta) is a multidisciplinary AEC firm founded in upstate New York in 1976. Along with our corporate headquarters located near the intersection of Interstates 81, 86 and 88, Delta has additional offices across Central New York and Chevy Chase, MD, together with remote team members located across the US. We deliver engineering and architectural design services for multiple market sectors along with providing environmental, survey, landscape architecture, and ecological services to public and private clients located throughout the continental US. Delta team members take advantage of terrific opportunities to advance professionally in a supportive team-oriented culture while enjoying generous compensation and benefits package.

WHO WE NEED

We are seeking a versatile and team-oriented Structural Project Engineer in our Structural Team, ideally located in the Syracuse or Albany, NY area, or at our Endwell, NY office. Candidates located outside the designated office locations may qualify for full remote work, subject to company policy. The ideal candidate should have a Bachelor’s Degree in Civil / Structural Engineering, with a minimum of 6 years of relevant experience. A PE is also required. Experience should include structural analysis, design, and detailing for concrete, steel, and aluminum structures. Experience with cable design is preferred.

The primary duties associated with this position include:

• The candidate should be proficient with the International Building Code (IBC); ASCE-7; ACI 318; ADM-2020; and AISC.
• Performing challenging 3-dimensional structural analyses and designs for a wide variety of clients using various state-of-the-art design software, including RISA 3D, SAP, RAM, and RISA Foundation.
• Responsible for serving as lead project engineer, i.e., taking responsibility for developing design, preparing detailed structural drawings using AutoCAD and REVIT, and specifications. This includes coordinating the work of junior team members and amongst other trades.
• Solving engineering problems using experience, judgment, and education and knowing when to ask for assistance when required.
• Write and review related reports for the services provided.
• Scoping projects and assisting project managers with proposal creation.
• Serving as a Quality Control reviewer for the designs of team members.
• Assisting the Team Leader in initiating, developing, and implementing continuous team improvement initiatives.
• Supporting structural work in our building projects within the Structural Facilities Group as workload warrants.
• Attending client meetings/presentations in the daytime or evenings.
• Communicating with client representatives, contractors, and suppliers.
• Participating in site visits/inspections/documentation during construction.
• Work on a variety of projects including schools, industrial facilities, commercial buildings, and governmental projects.
• This position requires an individual that has strong technical abilities with good organizational and communication skills, and the ability to work in a fast-paced market.

Additional duties will include preparing structural designs; prepare structural design summaries and detailed drawings using AutoCAD and REVIT; consider alternate designs and value engineering; and meeting scheduled project deadlines.

Delta is driven to exceed our clients’ expectations on every project. Accordingly, the successful applicant for this position must be willing to occasionally work adjusted hours/overtime.

WHAT WE OFFER

Hiring Salary Range: $80,000-$110,000 (Salary to be determined by the applicant's education, experience, knowledge, skills, and abilities along with an internal equity and alignment with market area data.)

The following are a few of the benefits that we offer:

• Paid Holidays, Vacation, Sick time
• Health and Dental Insurance
• Optional Vision, LTD and Term Life Insurance
• Enhanced Short Term Disability
• 401K Retirement Plan
• Tuition Assistance Program
• Professional Licensing Reimbursement
• Recruitment Bonus Program

We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job ID: 517556

Exempt

National Pipe & Plastics, a CRH company, is one of North America’s largest PVC pipe producers, serving the water and energy markets from two east coast locations in Endicott, NY, and Greensboro, NC. But we’re more than just a manufacturer. Our long history of exceptional customer service and product quality enables us to be a trusted and strategic solutions partner to engineers, contractors, distributors, specifiers, and more. As part of the CRH Infrastructure Products business, we are leading the industry with innovative, sustainable solutions with a safety-first mindset.

Job Summary

The Production Supervisor is responsible for leading a manufacturing production team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet all productivity, safety, and quality goals. They are driven to continually improve performance and embrace changes that will help both their team and company meet production standards. They normally will lead a team of 10-20 team members.

Job Location

This position will be located at our plant in Endicott, NY.

Job Responsibilities

• Ensures a safe workplace is maintained and there is a safety mindset in all things we do
• Follows, and ensures others follow, all policies, standards, and safety requirements defined by the company
• Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards
• Hires, schedules, and supervises full time staff and additional temporary staff
• Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary
• Performs timely quarterly and annual reviews for all team members
• Facilitate team development and growth, employee skill development, problem-solving and resolution
• Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace
• Ensures a quality product is being produced and all quality processes are being followed
• Works directly with Quality Control, Engineering, and Maintenance, to improve quality, streamline efficiencies and reduce operating expenses
• Tracks productivity for measured efficiency and improvement and operates at or below the budgeted cost for production utilizing lean manufacturing procedures and cross training
• Oversees adherence to inventory control procedures to ensure inventory accuracy goals are constantly achieved
• Assist with troubleshooting and solving production issues
• Performs other duties as requested by management
• Demonstrated leadership in safety & environmental compliance
• Strong analytical, problem-solving, and critical thinking skills
• Ability to coach, develop and build a strong team of employees
• Strong listening and clear communication skills both written and verbal
• Ability to effectively resolve conflict
• Skilled at working effectively with cross functional teams
• Ability to manage multiple priorities simultaneously
• Demonstrated ability to work in a results-oriented environment

Job Requirements

• Minimum one year of supervisory experience required, manufacturing environment preferred
• High school diploma or equivalent required, college degree preferred
• Proficient in Microsoft Office including Word and Excel
• Ability to perform basic mathematical skills such as calculating percentages and volumes

Job Compensation/Benefits

• The annual salary is $70,000-85,000
• $2500 sign on bonus
• Annual bonus opportunity of 5%
• 401(k) plan / group retirement savings program
• Short-term and long-term disability benefits
• Life insurance
• Health, dental, and vision insurance
• Paid time off
• Paid holidays

What CRH Offers You

• Highly competitive base pay
• Comprehensive medical, dental and disability benefits programs
• Group retirement savings program
• Health and wellness programs
• An inclusive culture that values opportunity for growth, development, and internal promotion

About CRH

CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.

If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!

Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.

EOE/Vet/Disability

• CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Position: Sr. Hardware Design Engineer

Location: Endicott, NY - Onsite

Job Description Summary

Under general direction, has duties of instructing, directing, and checking the work of other electrical engineers. Performs an assortment of complex engineering duties such as the planning of manufacturing and the installation, operation, and maintenance of electrical apparatus. Provides existing support to activities in the use of electrical devices and energy for commercial, domestic, and industrial use. Works directly with engineers in other disciplines to augment production size and value. May provide work leadership and training to lower level professional and technical staff. May act as internal consultant providing technical guidance on most complex projects. This is the highest level non-management position. Typically requires a Bachelor's degree in Engineering and seven or more years of experience.

• Design of complex high speed digital circuit card assemblies
• Design, analysis and verification of Digital circuits for FPGA and microcontroller interfaces such as PCIE, SPI, I2C, UART, GPIO, DDR, Ethernet, ARINC, 1553, etc.
• Design, simulation and verification high speed interfaces (Signal Integrity)
• Circuit design tasks consist of part selection, schematic capture, PWB creation support, performance analysis and simulation and design verification testing.
• Support test and troubleshooting of systems, modules and sub-assemblies of digital modules
• Work closely with PWB packaging and layout engineers
• Technical writing skills: capable of creating required engineering documentation
• Generate and review the technical content of test procedures, drawings, engineering specifications, reports, Engineering Change Orders and other documentation
• Interface with other Engineering disciplines, Operations, Quality and other supporting functions to drive defect resolution to root cause
• Generate and implement improvements in product and test design and methodologies to reduce cost, increase yield and improve throughput
• Motivated self-starter who has the ability to work effectively in team environment
• Provide training and support to technicians and manufacturing personnel as required
• Lead/Mentor a team of junior engineers
• Interface with customers and suppliers as required
• Presentation of design to internal and customer review boards at milestone reviews.
• Support legacy design obsolescence issues and reverse engineering

MUST HAVE

• Experience with Siemens (Mentor) DX Designer
• Hyperlynx

Summary Description:

• High level design position involved in non-routine and complex assignments. Project Engineers and Project Architects work with the Project Manager to develop design solutions of a specific discipline which are incorporated into contract documents by the design team. While these positions are primarily technical, assistance with some project management duties is likely.

Primary Duties:

• Assist the PM in developing design parameters, scopes of service and person-hour estimates during the proposal stage
• Assign individual work tasks and provide guidance to subordinate team members of that design discipline. Discuss the desired expectations of the delegated work including the amount of time estimated to complete the work
• Responsible for the quality control of work products (e.g., reports, studies, drawings, letters, calculations, memos, etc.) for the specific discipline
• Responsible for the preparation of technical specifications
• Responsible for the processing of shop drawings and submittals
• Considers alternate designs and value engineering
• Responsible for meeting scheduled deadlines
• Monitor performance of project team members and provide feedback to the Project Manager. Discuss potential corrective action with the Project Manager as required
• Attend and/or lead client meetings/presentations – daytime or evenings
• Communicate with client representatives, contractors, suppliers, etc
• Participate and or lead site visits/inspections/documentation during construction

Qualifications

• Bachelor's degree in Electrical Engineering or related field
• Strong problem solving, technical, math and science skills
• Strong written and verbal communication

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Our firm is working with a growing Manufacturing plant in the Southern Tier of Upstate NY. They are looking for Senior Design Engineers to lead the development of advanced mechanical componentsResponsibilities

• Develop, design, and test fixtures and tools for various machining
• Develop manufacturing routings and analyze engineering change notices
• Participate in design for manufacturability reviews
• Lead product/process improvements and cost out initiatives.
• Perform root cause analysis
• Program CNC for various milling, turning and operations and ensure optimum cycle time and tools selection.

Qualifications and requirements

• 10 years+ in a shop floor manufacturing environment preferably aerospace products
• US Citizen
• Bachelor's degree in mechanical or manufacturing engineering or Master degree with 7 years of experience.
• Must have at least 5-years of CAD 3D & 2D drawings software experience preferably Creo and Esprit Edge CNC programming.
• Lean Six-Sigma process improvement experience
• At least 3-years experience in designing fixtures and tools for machining operations and assemblies
• Familiarity with vacuum and dip brazing processes

This role is onsite 5 days