Engineering Jobs in Delano Wright County, MN

Location: 100% on- site in Delano, MN at a medical manufacturign facility

About the Company

Trelleborg Medical Solutions partners with the world’s leading medical device and biopharmaceutical companies, collaborating from concept to commercialization to bring to market impactful solutions that improve patient quality of life. It leverages decades of design and manufacturing experience, in-depth knowledge of polymer materials and a deep understanding of customer applications and end-use environments to deliver pioneering, engineered solutions for transformative health technologies. Utilizing its global quality system and engineering and manufacturing network, the company is a production partner of choice for medical device and biopharmaceutical companies.

About the Role

We are seeking a Senior Manufacturing Engineer to join the Delano team. Follows good manufacturing practices (GMP) and principles to provide engineering support and develop robust manufacturing processes. Has a primary role in the engineering of new, modified and/or existing manufacturing operations in a clean-room environment. Apply engineering theory and principles to ensure that the Value Stream for specific products is optimized using Lean Sigma tools.

Responsibilities

• Analyze product specifications and translate these into manufacturing processes to establish production rates, achieve expected quality levels and establish reliability of finished product.
• Identifies tooling related issues and communicates/works with a tool maker to resolve the issues.
• Develop manufacturing methods for new and existing products, establish labor standards and develop product cost information.
• Meticulously document all manufacturing process information and sequences within the Trelleborg document control system.
• Identify opportunities for improvement to existing processes and methods using data or observation. Develop the improvements and implement them as quickly as practical.
• Make improvements to production rates and reduce scrap by identifying and implementing new and better equipment, processes or human factors methods.
• Assist production in troubleshooting production problems with individual components, individual processes and help improve the situation to assure customer delivery dates and superior quality.
• Review production schedules and engineering specifications to resolve production problems.
• CAPA- Active member of the CAPA team responsible for implementing permanent corrective actions.
• DMR- Participate in determination of product DMR disposition plan and approval with the VS team.
• Follow ISO 13485 and 21 CFR part 11 and part 820 and Trelleborg Quality System protocols.
• Execution of DOE's, problem solving, FMEA's, validations, control plans, continuation engineering for products.
• Actively Support Production, Engineering and Quality departments.
• Senior Manufacturing Engineer: including all the above.
• Mentors Manufacturing Engineers and Technicians through experiences and education as opportunities arise.
• Develops ideas and strategies to improve operational efficiency, add value, aid business performance and work towards a culture of continuous improvement.
• Successfully manages multiple high-profile projects simultaneously.

Qualifications

• Bachelor’s Degree in Industrial, Manufacturing or Mechanical Engineering or related discipline or equivalent combination of education and experience.
• Lean Sigma Green or Black Belt certification.
• Polymer Science, Lean Kaizen or other specialized background.
• 7 years of experience in manufacturing engineering or related discipline.
• Demonstrated leadership skills.
• Medical device manufacturing experience.

Required Skills

• Ability to read, write, speak and understand the English language.
• Ability to communicate clearly by conveying and receiving ideas, information, and direction effectively.
• Ability to demonstrate adequate job knowledge to deliver a world-class performance.
• Ability to challenge oneself to consistently meet all goals and deadlines.
• Willingness to strive for excellence by producing work that is free of errors and mistakes.
• Desire to delight both customers and coworkers by offering encouragement, fostering teamwork and addressing conflict appropriately.
• Commitment to making improvements company-wide.
• Demonstrated competence using Microsoft Office.
• Use of statistical analysis software.
• Interpersonal skills and good communication technique.
• Ability to coordinate multiple projects and deadlines, manage and identify the scope.
• Act as a project leader on major projects.
• Lean Manufacturing- Proficient in the use of problem-solving tools such as 5 why, Fishbone, 8D, etc.
• Understanding of manufacturing processes for medical components and devices.
• Good understanding of metrology principles and methods.

Salary Range: $95,000 - $123,000 based on experience.

Equal Opportunity Statement

Trelleborg Medical Solutions is committed to diversity and inclusivity in the workplace.

Guided Search Partners is an Executive Search firm that is built on the principles of Trust, Transparency, Specialization, and True Long-term Relationships. Our goal is to provide the best experience for both our clients and candidates. We specialize in delivering the upper echelon of candidates in Food & Beverage Manufacturing to clients for their needs in FSQA, Operations, Engineering/Maintenance, and R&D.

Role Description

We're partnered with a repeat client looking for a 1st Shift QA Supervisor. The organization is a privately owned food manufacturer who is undergoing some tremendous growth and expansion. This is an opportunity to join an organization that puts it's employees first and can offer plenty of room for advancement.

Qualifications

• BS Science related preferred but not a must have
• 3+ years' FSQA Experience
• Must come from food manufacturing
• Some previous supervisory experience

Please apply directly If this is an opportunity you’d like to explore further. If you or someone you know is looking for other opportunities in the food and beverage industry, please email us directly at to get connected with an expert in the space!

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Job Tittle: R&D Component Engineer

Duration: 06-month contract

Location : Maple Plain, MN

Your Responsibilities Will Include:

• Evaluating and approving parts to ensure compliance with requirements

• Inspect, analyse, potentially rework, review, test and disposition components to ensure functionality

• Perform both design and project tasks related to the inspection, testing, and production support of implantable orthopedic devices and associated non-implantable delivery instruments

• Assist in research and development of new components, assemblies, and processes to support product development and continuation activities

• Perform dimensional, strength of materials, mechanism movement, and/or manufacturability analysis

• Generate test methods and protocols, perform tests, analyze data, generate reports for product verification, and present findings as needed to cross-functional stakeholders

• Perform various product engineering tasks as necessary to support R&D and operations

• Communicate updates to the program manager and other various cross-functional team members as it relates to task completion and schedule adherence relative to overall business goals and objectives

• Evaluate and solve technical challenges either individually or as part of a team by: collaborating cross-functionally to troubleshoot issues and implement solutions; actively participating in problem solving sessions and/or brainstorming; systemically and logically working through issues using personal skills/experience and/or pulling in resources as needed; and designing and conducting experimental testing to appropriately characterize and evaluate solutions

• Participate in engineering meetings, technical working groups, and project management discussions

• Assist in the building, prototyping, modifying, and testing of engineering components

• Assist with prototyping, assembling, characterizing, validating inspection processes, rework instructions, and/or test methods

• Follow safety protocols, quality SOP's, and regulatory requirements in all tasks and activities

• Comply with applicable design-related standards published by external regulatory bodies

• Properly document activities in accordance with best engineering practices, company procedures, and regulatory requirements

• Perform other duties as needed and assigned

Minimum Qualifications

• Bachelor's degree in engineering (Mechanical, Manufacturing, Industrial, Biomedical, or technical equivalent) with 0-3 years of related work experience or an equivalent combination

• Hands-on experience in metrology and familiarity with metrological equipment

• Experience in the use of analytical methods including statistics, DOE, and associated SW tools (Minitab)

• Strong problem-solving skills, attention to detail, and the ability to work both independently and as a team

• Self-starter with proven ability to successfully work with minimal supervision

• Desire to learn and meaningfully contribute to the team

• Good teamwork and interpersonal skills

• Good written and verbal communication

• Ability to multitask, prioritize, and meet project deadlines with high attention to detail

Preferred Qualifications

• Hands-on experience with prototyping tools (3D printing, hand and/or power tools, manual and/or CNC machining, etc.), measurement tools (Keyence, Micro-Vu), and mechanical testing equipment

• Working knowledge of current CAD tools, SolidWorks experience preferred

• Experience working within an ISO certified or FDA registered work environment

• Familiarity with medical device quality systems and regulations

• Demonstrated cross-functional teamwork in technically demanding environment

• Strong bias for action and ability to shift as needed to support changing business needs

Join a High-Impact MedTech Team in Maple Plain!

Randstad, in partnership with our client, is looking for a motivated and detail-oriented R&D Component Engineer to join a dynamic, growing team supporting a recently acquired medical device startup.

If you are a \"hands-on\" engineer who loves seeing how parts come together—and you want to work in an environment where your contributions directly impact patient safety and product innovation—this is the place for you!

The Fast Facts

• Role: R&D Component Engineer (Level I)
• Location: Maple Plain, MN (100% On-Site)
• Pay Rate: $37.00/hr
• Term: 6-Month Contract (Temporary)
• Target Start: March 23, 2026
• Top Skills: Inspection, Qualification, and Component Disposition

The Opportunity

In this role, you aren't just a number; you are a key member of a small, agile engineering team. You will act as the technical bridge between design and manufacturing, partnering across R&D, Quality, and Supply Chain to ensure every mechanical part used in these orthopedic products is reliable, compliant, and ready for production.

What You'll Do

• Evaluate & Approve: Inspect and analyze mechanical components using equipment like Laser Scanning and Micro-Vu to ensure they meet strict requirements.
• Problem Solve: Troubleshoot technical challenges and collaborate with the team to implement smart, cost-effective solutions.
• R&D Support: Assist in prototyping and building new components, assemblies, and test methods.
• Documentation: Create drawings, specifications, and change orders while maintaining high-quality standards (ISO/FDA).
• Collaborate: Participate in design reviews and technical working groups to move projects forward.

Who You Are

• Educated & Eager: Bachelor's degree in Engineering (Mechanical, Manufacturing, Biomedical, etc.) and 0–3 years of experience.
• Technical Savvy: Hands-on experience in metrology and analytical methods (like Minitab).
• A \"Maker\" at Heart: (Preferred) You enjoy 3D printing, CAD (SolidWorks), or working with CNC/machine tools.
• Safety Minded: Comfortable working in a cleanroom environment and lifting up to 30 lbs.
• A Team Player: You're a self-starter who communicates well and loves to learn.

Ready to help us shape the future of orthopedic care? Apply today!

Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

At Randstad, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact .

Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Randstad offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility).

This posting is open for thirty (30) days.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.