Engineering Jobs in Croton On Hudson

About the Company

At MetroWall, we hold our values close to heart, with respect being the cornerstone of our interactions. We believe that fostering a respectful environment not only enhances collaboration but also drives innovation. Overcoming obstacles is part of our journey, and we view challenges as opportunities to grow and improve. By embracing these challenges, we consistently strive to exceed expectations, delivering exceptional results and setting new standards in our industry. Together, these values create a culture of excellence and continuous improvement. Alignment with these values is critical to the success of any employee at MetroWall.

About the Role

The Manufacturing Engineer acts as the bridge between Engineering and Production, owning all aspects of process definition, manufacturability, and continuous improvement for MetroWall’s glass partition, door, and framing systems.

RELOCATION ASSISTANCE NOT AVAILABLE.

Responsibilities

Process Design & Standardization:

• Develop, document, and maintain manufacturing processes for aluminum and door assembly operations
• Create Standard Operating Procedures (SOPs), setup sheets, visual work instructions, and tool/fixture lists
• Define operation sequences, routing steps, and cycle times in ERP (Epicor/Kinetic)
• Establish and maintain machine capability matrices, ensuring processes align with equipment limitations

Design for Manufacturability (DFM):

• Participate in NPI and R&D project reviews to ensure designs are manufacturable within MetroWall’s equipment and process constraints
• Collaborate with Product Design Engineers to optimize part geometry, tolerances, and hardware selection
• Approve manufacturability sign-offs prior to product release (NPI Phase Gate)

Process Improvement & Cost Reduction:

• Analyze production performance data to identify waste, bottlenecks, and rework causes
• Implement Kaizen and lean initiatives
• Lead trials to validate improved processes, new jigs, or revised toolpaths

Collaboration & Support:

• Work closely with Production Managers to ensure practical implementation of processes
• Support Production Engineers during complex custom projects or prototypes
• Serve as a technical escalation point for production issues

Document & Revision Control:

• Maintain all process documentation under version control (aligned with Engineering ECO system)
• Link controlled documents to Epicor Work Orders and routings
• Audit shop floor adherence to latest revision

Safety & Compliance:

• Ensure compliance with OSHA and internal safety standards
• Integrate safety instructions directly into work procedures

Qualifications:

• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering.
• 3+ years of manufacturing experience (preferably architectural aluminum/glass or similar fabrication).
• Hands-on understanding of CNC machining, cutting, drilling, and assembly operations.
• Familiarity with Epicor/Kinetic, AutoCAD/Inventor, and Lean manufacturing tools.
• Strong documentation and communication skills.
• Ability to work cross-functionally between Engineering and Production.
• Strong organizational abilities to manage multiple tasks and projects simultaneously. Skilled in identifying issues, analyzing options, and implementing effective solutions in a timely manner.
• Keen attention to detail with a commitment to producing high-quality work, ensuring accuracy and precision in all tasks.

Work Environment

• Office & Field

Additional Responsibilities:

• Work with all members of the MetroWall team to deliver a level of customer service that exceeds the expectations of our customers
• Assist sales team personnel in selecting solutions for clients
• Continuously improve existing/new internal processes and deliverables
• Obtain thorough understanding of MetroWall products and their capabilities in order to provide support to other teams/team members

About Us

Imagine the innovation and expertise behind the world’s leading cosmetic brands, brought to you by a distinguished Italian company with a legacy of excellence. Since 1972, Intercos Group has been at the forefront of color cosmetics, pencils, nail polish, skincare, and personal care products. We pride ourselves on being the only cosmetics manufacturer that combines top-tier quality and advanced technology with a global reach and a personalized touch.

With 15 commercial offices and 15 production facilities across 12 countries, Intercos Group brings a local approach to a global stage. We continually set the standard for beauty, crafting exceptional product lines for brands worldwide. As one of the largest suppliers in the cosmetics industry, we are a leading force in the research, development, and production of beauty products, shaping the future of the industry with every season.

Position Summary

The Quality Control Manager is responsible for all aspects of Quality measurement, product inspection and in-process testing in West Nyack, NY. The primary responsibility is to ensure that Quality Control personnel perform the required inspection accurately and as specified by the appropriate quality documentation. This position will allocate resources to efficiently maintain orders on schedule.

Essential Functions

• Quality Control – Product Inspection and Release

1. Testing of materials required to produce a finished product and the final product to confirm compliance to issued specifications.
2. QC Inspectors are responsible for (but not limited to)
3. Physical – Dimensions, Hardness, Drop test, tap test, net weight; Visual – Color (e.g. color matching), Appearance; Sensory - Odor, Texture

• Product Disposition

1. Determine final disposition of all products
2. Responsible for approving and rejecting all batches
3. Management of Product Hold and Disposition

• Quality Control Documentation/Samples for Clients

1. Conversion of Product Specifications to Production Line Documentation (checklists, forms)
2. Finished Product Documentation to be issued to Clients, (e.g. COA)
3. Pre-Shipment Samples to Clients

• Management of Documents and Product Samples Retention Requirements

1. Records /Documentation review and sign off for OTC Products

• Monitor and Confirm production operations conforming to specifications or requirements

1. Line Clearance
2. Critical Process Parameter Line Set Up

• Management of Staff
• Manage QC work schedules; accountable for QC team’s work hours
• Responsible for allocating QC personnel to the production line
• Perform staff performance evaluation
• Responsible for the training of the QC personnel, the discipline and morale of the staff.
• Perform other duties and projects as assigned.

Job Qualifications

• Bachelor’s degree in Applied Sciences or Engineering (e.g., Biology, Chemistry, Physics, or a related field).
• At least 5 years of experience in Quality Management, QA, or QC.
• Proven expertise in Quality Management in cosmetic industry
• Familiarity with Quality Systems, including GMP and GLP, in an FDA-regulated industry.
• Strong critical thinking and problem-solving skills, with the ability to identify and resolve issues promptly, analyze information effectively, and develop alternative solutions.
• Excellent interpersonal and communication skills.
• Capable of managing and developing staff.
• Collaborative team player.
• Self-motivated and proactive.

Job Benefits

Health Insurance: Comprehensive medical, dental, and vision coverage

Retirement Plans: 401(k) plan, often with company matching

Life Insurance: Coverage for employees in the event of death or disability

Paid Time Off (PTO): Vacation days, sick leave, and personal days

Holidays: Paid company holidays and floating holidays

Professional Development: Training programs and opportunities for career advancement

Performance Bonuses: Annual merit increase and/or bonus based on individual performance

Company Events: Team-building activities, social events, and company outings

Employee Assistance Programs (EAPs): Confidential counseling and support services for personal and professional issues.

EEO

Intercos Group is committed to creating a diverse and inclusive workplace where everyone is valued and respected. We believe that a wide range of perspectives and experiences enhances our innovation and success. We are an Equal Opportunity Employer and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or any other legally protected status. All qualified applicants are encouraged to apply and will receive consideration for employment without regard to any of these characteristics. We are dedicated to providing a work environment that is free from discrimination and harassment and promotes equal opportunity for all.

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

JOB SUMMARY

This position is the Lead Maintenance person for Production startup. This position leads maintenance activities in the Company for all process/packaging and utility systems to aid in smooth startup and operations.

Performs work to keep machines, mechanical equipment, and the systems of buildings in repair.

DUTIES & ESSENTIAL JOB FUNCTIONS:

• Coordinates and leads start-up Maintenance Technicians to address and resolve start-up issues.
• Upon production start time, diagnose, troubleshoot, and repair startup problems.
• Troubleshoots and resolves other production issues.
• Communicates startup issues to the maintenance and Engineering team.
• Upon completion of start up duties, performs other maintenance duties as directed by Managers.
• Develops solutions to avoid recurring startup issues.
• Enters and completes work orders with documentation in FIIX.
• Becomes proficient in diagnosing and troubleshooting controls and electrical issues.
• Performs routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions.
• Inspects, operates, or tests machinery or equipment to diagnose machine malfunctions.
• Adjusts functional parts of devices or control instruments, using hand and measuring tools.
• Pipe fitting; HVAC maintenance; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs.
• Trains and/or supervises maintenance personnel.

OTHER FUNCTIONS AND RESPONSIBILITIES:

• Follows all safety, Lock-Out/Tag-Out procedures, and food safety Company protocols.
• Reports all safety or quality problems to management, QA, and SQF practitioner.
• Performs other duties as assigned.

QUALIFICATIONS and COMPETENCIES:

• Minimum High school diploma or general education degree (GED), and 5 to 10 years of related experience and/or training, or equivalent combination of education and experience required.
• Required knowledge in electrical and HMI controls.
• Computer skills required: Microsoft Office Suite; CMMS Systems, General PC skills and comfort level.
• Other skills required:
• Bilingual with Proficiency in English and Spanish
• Ability to learn and work with electronic process controllers, HMI interfaces.
• Comfort level troubleshooting advanced PLC controlled equipment
• Basic understanding of network systems
• Electrical experience with 480V switchgear and controls, 120V and 24V controls.
• Mechanical experience and proficiency in general equipment troubleshooting and repair
• Prior experience with root cause analysis of process failures.
• Preferred 5 to 10 years of experience with all aspects of production plant maintenance.
• Preferred experience within the food manufacturing industry.
• Computer skills preferred: FIXX

COMPETENCIES:

• Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures.
• Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan.
• Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed.
• Judgement - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions.
• Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
• Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.

PHYSICAL DEMANDS AND WORK ENVIRONMENT:

WORK ENVIRONMENT:Hours are Monday – Friday, 3:00 am to 11:00 am onsite in Congers, NY with additional days/hours as needed. This is not a hybrid / remote position.

• Plant and laboratory employees cannot have allergies to milk, eggs, tree nuts, peanuts, soy and wheat.
• Continually required to stand and walk.
• Occasionally required to sit.
• Continually required to utilize hand and finger dexterity.
• Continually required to climb, balance, bend, stoop, kneel or crawl.
• Continually required to talk or hear.
• Occasionally required to taste or smell.
• Frequently exposed to wet and/or humid conditions (non-weather).
• Continually works near moving mechanical parts.
• Frequently works in high, precarious places.
• Occasionally works around fumes, airborne particles, or toxic chemicals.
• Frequently exposed to outside weather conditions.
• Occasionally exposed to extreme heat or cold (non-weather).
• Occasionally exposed to bloodborne and airborne pathogens or infectious materials.
• While performing the duties of this job, the noise level in the work environment is usually moderate.
• The employee must frequently lift and/or move up to 100 pounds, following safe lifting procedures.
• Specific vision abilities required by this job include: close vision; distance vision; color vision; peripheral vision; depth perception and ability to adjust focus.
• Specialized equipment, machines, or vehicles used: Maintenance Tools, Pickup Truck, Fork Lift, Scissor lift and other lift devices.

The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Star Kay White is an equal opportunity and E-Verify employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, disability (physical or mental), age, sexual orientation, pregnancy, breastfeeding, gender, gender identity or expression, transgender status, national origin, ancestry, military/veteran status, citizenship status, genetic information, predisposing genetic characteristics, familial or marital status, status as a victim of domestic violence, prior arrest or conviction record, or any other characteristic protected under federal, state, or local law. Star Kay White is committed to providing equal opportunity to individuals with disabilities in employment. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act, the New York Human Rights Law, or local laws.

Must be 18 years or older to apply.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

About the Company

At MetroWall, we hold our values close to heart, with respect being the cornerstone of our interactions. We believe that fostering a respectful environment not only enhances collaboration but also drives innovation. Overcoming obstacles is part of our journey, and we view challenges as opportunities to grow and improve. By embracing these challenges, we consistently strive to exceed expectations, delivering exceptional results and setting new standards in our industry. Together, these values create a culture of excellence and continuous improvement. Alignment with these values is critical to the success of any employee at MetroWall.

About the Role

The Engineering Project Manager (EPM) leads product design initiatives and oversees custom engineering solutions. This role focuses on managing new product development, ensuring successful market launches, and handling custom projects in collaboration with R&D, sales, and engineering teams.

Responsibilities

R&D Project Management & Product Launch:

• Lead the planning, execution, and monitoring of product development projects, from concept to market launch, ensuring alignment with business objectives and market needs.
• Collaborate with R&D, production, and sales teams to ensure new products are manufacturable, cost-effective, and innovative.
• Develop project timelines, manage budgets, and allocate resources efficiently to meet project goals.
• Gather and implement feedback from customers and internal teams to refine and improve product designs.
• Assist in go-to-market strategies, including product positioning and promotion plans.

Custom Project Management:

• Collect custom project requests through established sales channels, or capture any that bypass the process, ensuring they are reviewed with R&D before moving forward.
• Once a custom project is confirmed, oversee the handoff to the engineering team and provide guidance as needed to ensure smooth execution.
• Collaborate with R&D to develop innovative solutions for complex custom projects, ensuring the engineering team successfully implements the designs according to plan.

Collaboration & Technical Support:

• Act as the main liaison between sales, R&D, and engineering teams to ensure the seamless execution of both product design and custom projects.
• Provide technical oversight throughout the project lifecycle, from design to production and installation, ensuring alignment with the initial project plan.
• Communicate project status and resolve any technical challenges that arise during execution, working closely with all involved departments.
• Assist internal teams with project specifications and technical guidance, ensuring quality and consistency in both standard and custom solutions.

Qualifications

• Bachelor’s degree in Mechanical Engineering or a closely related field.
• Solid experience in product design, product lifecycle management (PLM), and new product introduction (NPI). Ability to lead and manage the development of new products from concept through to production, ensuring alignment with business objectives and market needs.
• Advanced proficiency in AutoCAD and Autodesk Inventor for creating and modifying detailed design drawings, 3D models, and prototypes.
• Strong verbal and written communication skills for effective collaboration with cross-functional teams, stakeholders, and customers. Ability to clearly convey design concepts and project updates.
• Excellent communication, organizational, and problem-solving skills
• Highly organized, capable of managing multiple projects and tasks efficiently. Adept at troubleshooting design challenges and implementing effective solutions quickly.
• A meticulous approach to design work, ensuring precision and accuracy throughout the product development process.
• PMP (Project Management Professional) certification preferred.

Work Environment

• Office and Field

Additional Responsibilities

• Work willingly with all members of the team to foster a collaborative and innovative work environment.
• Stay informed on industry trends, emerging technologies, and competitive products to drive continuous improvement and innovation.

Equal Opportunity Statement

MetroWall is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. MetroWall's management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs, and general treatment during employment.

• Design, implement, and oversee the installation and maintenance of HVAC systems in commercial and residential settings.
• Conduct comprehensive assessments of existing HVAC systems and recommend improvements or replacements as necessary.
• Collaborate with architects and contractors to ensure the successful integration of HVAC systems in building designs.
• Prepare detailed reports and documentation, including designs, project costs, and compliance requirements.
• Troubleshoot and resolve HVAC-related issues promptly and professionally.
• Stay current with the latest HVAC technologies and industry trends to provide the most effective solutions to our clients.
• Ensure compliance with local, state, and federal HVAC engineering standards and regulations.

• Bachelor's degree in Mechanical Engineering or a related field.
• Professional Engineer (PE) certification is required.
• Minimum of 5 years' experience in commercial and residential HVAC engineering.
• In-depth knowledge of HVAC systems, including design, installation, and maintenance.
• Strong project management skills, with the ability to manage multiple projects simultaneously and deliver on time and on budget.
• Proficiency in using industry-standard software for HVAC design and analysis.
• Commitment to staying current with the latest HVAC technologies and industry trends.