Engineering Jobs in Belleville West Virginia

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Overview:

“Together We Make Life Better”. Our quality engineering, sustainable solutions and safety record inspire everything we do. Our diverse and inclusive workforce allows for all employees to feel valued and safe to give their opinions and improve our company.

Tata Consulting Engineers USA, LLC, (TCE), is a multi-disciplinary engineering organization offering a full range of integrated engineering design, project support, procurement and construction management services to the energy and chemicals industries.

Position Summary:

Performs routine and moderately difficult design assignments, which require knowledge and skill in basic drafting techniques, E3D, 2D & 3D CAD software, procedures, knowledge of applicable industry standards, and design standards with minimal supervision.

Responsibilities:

Develops under minimal supervision, CADD drawings from design sketches or catalog information.

Demonstrates a continuing consciousness of safety in daily activities, and implemented in work designed.

Prepares moderately complex engineering and constructions drawing from scratch, sketches or verbal instruction, utilizing manual or computer-assisted drafting/design techniques.

Marks up works in progress for others to draft (or CADD).

Performs related fundamental engineering support tasks such as updating computer lists, filing prints, distributing drawings, making simple calculations, proofreading reports, compiling Bills of Material, etc.

Communicates the design process with assigned discipline and coordinates work with other disciplines on assigned projects.

Checks basic layouts, designs and general arrangements of other designers and drafters for accuracy and compliance with code and company client standards and soundness of design basis used.

May utilize information from vendor prints, catalogs, technical manuals, etc. to do design work.

Field notes are neatly arranged, accurate and complete.

Sketches are readable by anyone and include all pertinent dimensions, notes and job number.

Uses time efficiently. Promptly act on established goals, understand constructive advice, and adjust to changing directions.

Performs tasks aware of the schedule requirements. Recognize that we all have internal and external customers who are dependent on the quality and timeliness of our output to meet their commitments. Coordinate assigned work to support all customers.

Keeps supervisor informed of progress.

Quality assurance for personal work assignments.

Supports field assignments as required.

Independently undertake actions, make recommendations, or provide notification when potential problems and opportunities are discovered or additional assignments are required.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write more detailed correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Knowledge of algebra and basic trigonometry is required.

Must demonstrate a proficiency in utilizing computer assisted techniques for difficult design applications.

Ability to apply common sense understanding to carry out instructions furnished in written, oral and diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Top Requirements for the Position:

Proficient with E3D

Proficient with AutoCAD

Proficient with CADWorx and Plant 3D

BIM 360 Experience

Experience with Laser Scanning/Total Station activities a plus.

Ability to perform Field Data Acquisition duties, including taking accurate measurements, walking, climbing stairs/ladders. Experience with Laser Scanning/Total Station activities a plus.

Education Requirements:

High school education or equivalent with basic drafting courses training from vo-tech or other applicable program.

Minimum of nine to ten years of technical work experience.

As an alternative, a minimum of three years of education in an associate or bachelor degree program for the relevant discipline with six plus years of experience in that discipline.

Experience based on knowledge, skills, and abilities may qualify with the approval of Director of Engineering.

EEO Statement:

Tata Consulting Engineers USA, LLC (“TCE”) is an equal opportunity and affirmative action employer committed to promoting diversity, equity, and inclusion in our workplace. We do not discriminate on the basis of race/ethnicity, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, veteran's status, or any other characteristic protected by local, state, or federal laws, rules, or regulations.

In compliance with federal law, all candidates hired will be required to verify their identity and eligibility to work in the United States and to complete the required employment eligibility verification form after acceptance of a formal TCE offer letter through our onboarding system.

Fraud Alert:

Please be aware that there have been instances of fraudulent job offers being made in the name of TCE by unauthorized individuals or organizations. We want to make it clear that TCE will never ask for any type of payment information during our interview process. Please be advised all email communications from TCE will come from our business email addresses, which end in '@ '. If you receive any suspicious job-related emails from any other domain, please do not respond to them and disregard any requests for personal or financial information. If you have any concerns about the legitimacy of a job offer or communication, please contact us through our website at