Education And Training Jobs in Bothell Washington

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.
• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.
• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.
• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.
• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.
• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.
• Screen paperwork for options, substitutions, and effectiveness of parts and materials.
• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.
• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.
• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.
• Coordinate and complete travelers, investigating and clearing check orders as necessary.
• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.
• Ensure that certifications for tools, test equipment, and personnel are current and compliant.
• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.
• Perform first article inspections and FAA conformities, coordinating results as required.
• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).
• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.
• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.
• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.
• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.
• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector
• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators
• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)
• Experience working with Microsoft Office (Excel, Word, PowerPoint)
• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.

Join our innovative team as a Silk Screener for Decorative Panels. In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels. Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity. Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials. If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up and perform multicolor decorative silk screen printing operations according to established procedures.
• Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.
• Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.
• Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.
• Work from blueprints, specifications, and verbal instructions to complete assignments accurately.
• Clean silk screens and maintain tools and equipment to ensure quality printing.
• Mix and match paint to established color samples, ensuring consistency and accuracy.
• Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.
• Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.
• Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.
• Check ink color using a color spectrometer and make adjustments as needed to match specifications.
• Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.
• Handle and dispose of hazardous materials in compliance with safety regulations.
• Maintain records of work performed and refile work packets in the ink room filing cabinet.
• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience silk screen printing.
• Experience mixing and color matching water based inks.
• Experience handling and disposing of hazardous materials per government regulations.
• Ability to recognize colors.
• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications:

• Perform ink formulation (e.g. measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).
• Experience working with overhead crane.
• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.00 – $49.92 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.

• Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.

• Conduct continuity checks to ensure proper functionality of electrical systems.

• Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.

• Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.

• Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.

• Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.

• Perform hand forming of electrical wiring and soldering as required to complete work assignments.

• Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.

• Execute necessary riveting tasks as part of the assembly process.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in electrical assembly installation.

• 1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).

• 1+ years of experience handling chemicals and/or hazardous materials.

• Ability to recognize colors.

• Ability to work in confined spaces.

• Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience as an Electrician or Apprentice.

• Completion of an electrical trade school program or have military related electrical experience.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 09, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett, Washington. 

As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety. Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings. By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft. Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role. Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance. Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities:  

• Obtain work assignments from the team leader or review relevant paperwork to determine tasks. 

• Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair. 

• Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches. 

• Use prints, specifications, and documents necessary to accomplish work effectively. 

• Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft.

• If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records. Disassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials. 

• Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders. 

• Fit and assemble detail components to repaired parts according to specifications and drawings. 

• Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.

• Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups. 

• Remove marks and scratches from metal surfaces using appropriate tools and techniques. 

• Seal edges of repair areas with color-matched sealant as required.

• Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed. 

• Document repairs identified by other mechanics and maintain personal certifications as required. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:  

• 1+ years of experience working with vinyl wallpaper, composites/non-metallic materials.

• Experience applying and evaluating decorative paint/ink for color match.

• Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all time.

Preferred Qualifications: 

• 1+ years of experience with aerospace or automotive spray painting.

• Experience working with detailed work instructions or reading and interpreting blueprints and drawings.

• Experience with touch-up painting.

• Enrollment in a Boeing partnered manufacturing related high school, community and technical college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $24.32 per hour with potential to earn up to $48.58 per hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 21, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

FlexCare is joining the Optum organization, which is a global organization that delivers care, aided by technology to help millions of people live healthier lives. The work you do with our team will directly improve health outcomes by connecting people with the care, pharmacy benefits, data and resources they need to feel their best. Here, you will find a culture guided by diversity and inclusion, talented peers, comprehensive benefits and career development opportunities. Come make an impact on the communities we serve as you help us advance health equity on a global scale. Join us to start Caring. Connecting. Growing together.

Are you a compassionate RN ready to make a difference? Join FlexCare's innovative team delivering IV therapy to patients with neurological, rheumatologic, gastroenterological, and immunological conditions.

*** This opportunity will work on-site at our FlexCare Infusion Center locations in Kirkland and Bellevue WA, must have some availability or flexibility to work as needed Monday-Friday, 8am-4pm ***

Primary Responsibilities:

• Provide direct IV care for pediatric and adult patients
• Prepare and administer sterile medications per protocol
• Monitor and respond to infusion reactions under NP supervision
• Communicate with providers and document clinical assessments
• Support order entry, lab review, and protocol updates
• Ensure accurate, timely documentation and participate in quality assurance

You'll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in.

Required Qualifications:

• ASN, BSN or MSN Degree
• Active RN license in your state of residence
• BLS and/or CPR certification, or willing to obtain upon hire
• Willingness to obtain additional licensure and/or ONS certification within 90 days
• 3+ years of infusion experience; solid IV skills essential
• Familiarity with EMR, Microsoft Office, HIPAA, OSHA, and INS standards
• Flexibility for on-call support may be required

Preferred Qualifications:

• Pediatric experience

Pay is based on several factors including but not limited to local labor markets, education, work experience, certifications, etc. In addition to your salary, we offer benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with us, you'll find a far-reaching choice of benefits and incentives. The hourly pay for this role will range from $28.94 to $51.63 per hour based on full-time employment. We comply with all minimum wage laws as applicable.

At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes - an enterprise priority reflected in our mission.

UnitedHealth Group is an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations.

UnitedHealth Group is a drug - free workplace. Candidates are required to pass a drug test before beginning employment.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Defense, Space & Security (BDS) KC-46 Tanker Program is seeking a Product Lifecycle Management Engineer to perform change integration functions for new and derivative products and provide technical support in Configuration Status Accounting tasks such as As-Built to As-Design reconciliation. This is a BDS position located in Everett, Washington, and reports to the PLM Manager of the KC-46 Configuration and Data Management team.

The KC-46 is a high-visibility, leading-edge Commercial Derivative airplane program to support the United States Air Force and International Customers. As a Product Lifecycle Management Engineer, you will use Program Management Best Practices to oversee the definition and integration of configuration and data management tasks that span multiple engineering functions and airplane level engineering projects and processes as the KC-46 program transitions from Development into Production phases. This position will be 100% onsite in Everett, WA.

Position Responsibilities:

• Collaborates/Leads the development, analysis, management and compliance verification of process and product baselines of complex products
• Defines, plans, coordinates and conducts (or leads) product and subsystem level technical design reviews and audits for new and derivative products.
• Coordinates/leads the integration and control of the configuration of Software and Hardware product elements and analyzes & resolves issues with engineering product structure.
• Develops, integrates and implements (or leads) engineering technical program plans including impacts, risks and incorporation of lessons learned spanning multiple engineering functions.
• Applies knowledge of the interface and integration constraints for complex systems to identify and analyze hardware, software, product and system impacts to effectively define an integrated change proposal.
• Creates, reviews and manages software description and software configuration documents and artifacts. Prepare SW deliverables meeting contract and CDRL (Contract Data Requirement List)
• Ensure consistent application of Configuration and Data management policies, processes and program management best practices, and those process documents are current and accurate.
• Understands and able to interpret contract requirements, Contractor Data Requirements List (CDRL) content related to Product Life Cycle include Configuration Management, Data Management and Configuration Status Accounting (CSA).

This position will be 100% onsite in Everett, WA

This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Basic Qualifications (Required Skills/Experience):

• Level 3: Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification
• Level 4: Bachelor's degree and typically 9 or more years' experience in an engineering classification or a Master's degree with typically 7 or more years' experience in an engineering classification
• Written and verbal communication skills with strong technical content.
• Experience and Knowledge of responsibilities and tasks performed by various Engineering Experience with Microsoft Office Applications; especially highly skillful with Excel as data process tool.
• Skills and ability to: collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
• Knowledge of drawing/data systems (e.g., ""used on"" drawings, part relationships, product data management) and configuration management principles and processes (e.g., part number control, revision level, naming conventions, product identification numbering systems ).
• Able to understand and interpret contract requirements, especially Contractor Data Requirements List (CDRL) content related to Configuration Status Accounting (CSA).

Preferred Qualifications:

• Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics). Knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., Operations, Logistics, Business).
• Familiar with relational database language and tools such as SQL Server, MySQL
• Familiar with application development languages and tools such as C-Sharp, HTML, CSS, JavaScript.

Relocation: 

This position does not offer relocation.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for 1st shift. Occasional alternative shifts as needed.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary Pay Range:

Level 3: $111,350-$150,650

Level 4: $135,150-$182,850

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This is not an Export Control position.

Education

Bachelor's Degree or Equivalent Required

Relocation

Relocation assistance is not a negotiable benefit for this position.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Confidential Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA), Avionics organization is seeking innovative and adaptable Electronic Systems Design and Analysis Engineers (Senior or Principal) to join our teams in Everett, WA .

Position Overview:

Our Avionics team play a crucial role in supporting the aircraft lifecycle, including research, design, analysis, build, certification, delivery, and in-service support for Boeing Commercial Airplane Systems.

Ideal candidate should demonstrate industry-leading expertise in one or more electronic systems across multiple aircraft, along with the ability to lead a team of engineers toward a common goal. Strong communication skills are essential, as effectively conveying complex technical ideas to senior leadership is critical for success in this role. You will collaborate directly with a global, multicultural team of engineers, as well as pilots, airline customers, suppliers, regulators, and various internal stakeholders, including lab operations, flight operations, logistics, financial operations, features strategy, and leadership across all Boeing commercial and military airplane programs. If this opportunity interests you, we would like to extend an invitation to join us.

Position Responsibilities:

• Develops and documents electronic and electrical system requirements.

• Designs hardware, software and interface specifications.

• Tests and validates to ensure system designs meet operational and functional requirements.

• Assists in monitoring supplier performance to ensure system integration and compliance with requirements.

• Ensures compliance with appropriate regulations and certification requirements, including ARP4754A, DO-178, and DO-254.

• Solves problems concerning fielded hardware and software over the entire product lifecycle.

• Research specific technology advances for potential application to customer and company business needs.

Work Authorization:

The position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options (Everett, WA).

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.

• 10+ years of experience working in an electrical design engineering environment.

• Experience in avionics design and a background in related fields within the avionics industry.

Preferred Qualifications (Desired Skills/Experience):

• Experience with Flight Management Systems, Displays, Communication Systems, Navigation and Radios, Inertial Reference Systems

• Pilot’s license and/or experience working in the flight deck

• Good written and spoken communication skills

• Exceptional organizational skills with attention to detail

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union:

This is a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bar

gaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

• Senior (Level 4): $146,200 - $197,800

• Principal (Level 5): $176,800 - $247,250

Applications for this position will be accepted until Mar. 23, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.