Information Technology Jobs in Everett Washington

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.

Join our innovative team as a Silk Screener for Decorative Panels. In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels. Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity. Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials. If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up and perform multicolor decorative silk screen printing operations according to established procedures.

• Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.

• Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.

• Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.

• Work from blueprints, specifications, and verbal instructions to complete assignments accurately.

• Clean silk screens and maintain tools and equipment to ensure quality printing.

• Mix and match paint to established color samples, ensuring consistency and accuracy.

• Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.

• Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.

• Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.

• Check ink color using a color spectrometer and make adjustments as needed to match specifications.

• Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.

• Handle and dispose of hazardous materials in compliance with safety regulations.

• Maintain records of work performed and refile work packets in the ink room filing cabinet.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience silk screen printing.

• Experience mixing and color matching water based inks.

• Experience handling and disposing of hazardous materials per government regulations.

• Ability to recognize colors.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. 

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications:

• Perform ink formulation (e.g. measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).

• Experience working with overhead crane.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.00 – $49.92 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.

Join our innovative team as a Silk Screener for Decorative Panels. In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels. Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity. Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials. If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up and perform multicolor decorative silk screen printing operations according to established procedures.

• Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.

• Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.

• Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.

• Work from blueprints, specifications, and verbal instructions to complete assignments accurately.

• Clean silk screens and maintain tools and equipment to ensure quality printing.

• Mix and match paint to established color samples, ensuring consistency and accuracy.

• Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.

• Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.

• Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.

• Check ink color using a color spectrometer and make adjustments as needed to match specifications.

• Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.

• Handle and dispose of hazardous materials in compliance with safety regulations.

• Maintain records of work performed and refile work packets in the ink room filing cabinet.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience silk screen printing.

• Experience mixing and color matching water based inks.

• Experience handling and disposing of hazardous materials per government regulations.

• Ability to recognize colors.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. 

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications:

• Perform ink formulation (e.g. measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).

• Experience working with overhead crane.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.00 – $49.92 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.