Engineering Structures Scimago Jobs in Wickliffe Ohio Remote
390 positions found
Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at and embark on a rewarding career journey with Austin.
Under close supervision, the employee will learn to perform routine aspects of estimating assignments to acquire the basic principles of estimating. Sections of a total project estimate will be delegated to the employee to prepare estimated quantities and costs. This position will usually specialize in a particular discipline (Mechanical, Structural, Electrical or Architectural). Request for costs will be sent to vendors or subcontractors in the local area where construction will be done, and the results will be analyzed and verified with historical data and research.
Essential Functions
Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions
- Lean how to ensure accurate quantities of materials needed and the pricing of these materials in a specific discipline and section of a project to realistically predict the cost to construct.
- Assist in the completion of estimates in a timely fashion to allow adequate review by superiors.
- Regularly communicate with subcontractors to ensure accurate pricing
- Gain knowledge of the need to re-evaluate cost estimates throughout the design phase of a project and prepare change orders of items in the Estimator’s discipline to account for scope of work changes.
- Learn to coordinate his/her section of the estimate with other disciplines to ensure all elements of the estimate are accounted for.
- Obtain applicable labor rates and quotations for materials and systems to establish an accurate estimate.
- Excellent communication skills.
Required Education and Experience
- Actively enrolled in a 4 or 5-year degree program in Construction Management, Architecture or Engineering.
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
The Austin Company is an EEO and DFWP Employer
Austin is wholly owned subsidiary of Kajima.
Finishing Technician
Emerging from MIT, Poly6 is an exciting, innovative manufacturing company that specializes in the development and production of advanced additive manufacturing and ceramic components for aerospace turbomachinery. We deliver high-performance products that meet the rigorous demands of quality, durability, and precision required for next-generation turbine engines while helping reduce greenhouse gas emissions.
At Poly6, you will have the opportunity to work alongside a highly talented team to solve problems in one of the world's most complex engineering sectors: aviation.
What we Offer:
* Weekly Pay for Hourly Employees
* Comprehensive Benefit Plans
* Quarterly Bonus Opportunity
* 401k with Company Match
* Emphasis on Employee Engagement
* Paid Holidays and Vacation Time
* Tuition Reimbursement
* Opportunities for Advancement
Position Overview:
The Finishing Technician supports daily manufacturing operations in the areas of safety, product quality, throughput, and workplace organization. This role performs hands on finishing, patching and repairing parts within the process flow of ceramics-based finished goods. The technician will use visual magnification techniques and equipment and machines to assist in the validation of production to meet daily and weekly production targets.
Key Responsibilities:
* Finish intricate, ceramic components by removing or repairing various types of visual and feature indications with precision tools and techniques.
* Perform in-process and final inspections using calibrated instruments and visual standards to ensure dimensional accuracy and cosmetic quality.
* Follow detailed work instructions, SOPs, and quality standards in compliance with regulatory requirements.
* Achieve team production and efficiency goals by meeting or exceeding operational and quality standards.
* Collaborate with engineers and quality teams to resolve build or process issues and support continuous improvement.
* Work cross functionally to perform ad-hoc duties as assigned to promote a culture of teamwork and efficiency such as assisting in develop and execution of engineering experiments as requested. Communicate effectively with production leadership, Quality, and Engineering to identify and resolve production issues.
* Maintain a clean, organized, and safe workspace in accordance with 6S and EHS policies and adherence to PPE and chemical hygiene protocols.
* Follow all PPE safety rules and policies for a safety-first culture such as safety glasses, safety shoes, gloves, and lab coats in designated areas.
Qualifications & Requirements:
Education & Experience:
* High School Diploma or GED, or equivalent certification/proven work experience.
* 0+ years of work experience in manufacturing, or another related field.
* Experience in a fast paced or additive manufacturing environment a plus. Exposure to using various lab instrumentation and test equipment a plus.
* Ability to pass standard vision and hearing test as part of pre-employment testing.
* High level of attention to detail and dexterity to perform work on detailed surfaces with repetitive small hand movements
* Comfortable working with hazardous materials in a controlled environment.
Other Required Knowledge, Skills, & Abilities
* Ability to work individually and in a team environment to achieve company deadlines accurately and efficiently.
* Experience with adherence to 6S standards and in a regulated safety and operational procedure environment.
* Ability to follow work and safety instructions and perform standard operating procedures with basic autonomy. Ability to follow accurately SOPs, work instructions, and SDS (Safety Data Sheet) documentation.
* Ability to perform basic math such as addition, subtraction and multiplication.
* Basic experience with Microsoft Office Suite products, and database systems (Oracle) to record production workflow for continuous manufacturing of operations for efficiency and equipment output.
* Ability to perform intermittent movement up and down stairs throughout a shift in a lab and manufacturing environment.
* Ability to sit for long periods of time in front of a microscope doing repetitive motions.
* Occasional flexibility in schedule to meet production demands due to time sensitive operations.
NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment.
Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen.
This is a full time position
Manufacturing Engineer | Precision Optics | Medical Device Manufacturing
A growing global medical device manufacturer focused on advanced ophthalmic technology is seeking a Manufacturing Engineer to support precision optical lens fabrication and assembly operations. This role partners closely with engineering, quality, and production teams to improve manufacturing processes, support production, and drive continuous improvement across the operation.
This is an opportunity to work on highly precise products that support vision care while contributing to process innovation and manufacturing excellence.
Key Responsibilities
• Develop, document, and optimize manufacturing processes for precision optical lens fabrication and assembly
• Develop and maintain metrology processes used to measure optical lens assemblies in production
• Partner with optical design engineers to ensure designs are manufacturable at scale
• Collaborate with cross functional teams to support quality and long term product reliability
• Lead manufacturing improvements including sourcing equipment and establishing new processes
• Provide day to day production floor support by troubleshooting build issues and improving yields
• Work with optical component suppliers to optimize product delivery and qualify new suppliers or components
• Create detailed manufacturing work instructions and process validation documentation
• Implement new manufacturing technologies and automation aligned with business goals
• Design tools and fixtures to improve manufacturing efficiency
• Develop manufacturing approaches for optical components using existing or newly proposed equipment
• Conduct root cause analysis and troubleshoot equipment or process failures on the production floor
• Drive continuous improvement related to process efficiency, yield, production rates, and cost
• Maintain project documentation and communicate updates during project status meetings
• Apply Lean manufacturing principles to reduce variability and improve yield
• Support capital equipment planning, evaluation, and implementation
• Maintain compliance with quality systems and medical device regulations
Minimum Requirements
• Bachelor’s degree in an engineering discipline
• 5+ years of experience as a Manufacturing Engineer
• Experience designing and implementing machines, equipment, or manufacturing processes in production environments
• Hands on problem solver able to work independently with minimal supervision
• Strong time management and ability to manage competing priorities
• Knowledge of Lean manufacturing practices and principles
• Experience with root cause analysis techniques
• Strong analytical and troubleshooting skills
• Ability to read and interpret engineering drawings
• Strong written and verbal communication skills across multiple organizational levels
• Familiarity with ISO standards and quality systems
• Experience driving productivity or cost savings initiatives
• Strong collaboration, influence, and change management skills
• Experience developing or optimizing Bills of Materials and manufacturing routings
• Basic project management experience
Preferred Qualifications
• Experience with optical manufacturing processes such as grinding and polishing
• Hands on experience working in an aspheric optical manufacturing environment
• Familiarity with optical metrology equipment such as interferometers
• Experience with machine programming
• Experience using statistical analysis tools such as Minitab
Description
Principal Advisor, Central Sterile Processing (System‑Level Strategic Leader)
Reporting directly to the Senior Director of Perioperative and Procedural Services, the Principal Advisor for CSP serves as the system's senior subject‑matter expert and strategic leader for this procedural domain. In this capacity, the leader will functions as an enterprise‑level authority responsible for establishing standard practices, policies, and procedures for daily operations. The role also provides oversight and input into the system capital replacement plan and operational KPIs. Additionally, this role leads accreditation readiness efforts and partners closely with the Quality Institute to ensure continued compliance across all UH locations. Operating within a matrixed structure, this role provides dotted‑line guidance to local operational leaders and manages a small, focused team responsible for delivering systemwide initiatives
A Brief Overview
The Principal Advisor, Procedural Areas serves as a clinical and strategic subject matter expert and resource across the health system, providing expert consultation, strategic guidance, and performance oversight for the assigned procedural areas of expertise, such as Central Sterile Processing/High Level Disinfection (CSP/HLD), Operating Rooms (OR), Endoscopy, and Cath/Interventional Radiology (IR) Labs. This role supports standardization, quality improvement, and regulatory compliance across all facilities, working collaboratively with local leaders to drive excellence in patient care, operational efficiency, and staff development. This position holds dotted-line authority to influence and support local managers and directors, aligning practices with system-wide goals, although the depending on the area, they may have direct reports. This position will develop and implement standardized departmental policies, procedures, and quality objectives. The position will also gather, analyze, and share key performance indicators (KPIs) across the system to support transparency, promote accountability, and drive continuous improvement at both the local and system levels. Additionally, this position will lead the creation and maintenance of a system-wide education and competency plan in collaboration with others.
What You Will Do
* Key Responsibilities:
* System-Level Leadership & Strategic Oversight: Serve as the system-wide clinical expert for assigned procedural specialty (CSP/HLD, OR, Endoscopy, Cath/IR) based on evidence based best practices, protocols, and technological advancement to enhance patient safety, workflow efficiency and clinical outcomes.
* Collaborate with local leaders to standardize workflows, optimize scheduling, and improve throughput and resource utilization.
* Serve as a liaison between system leadership and local procedural teams, translating enterprise-wide strategy into operational execution. Assist local leaders to translate strategic goals into operational practices across facilities.
* Lead or support initiatives to improve efficiency, safety, and patient outcomes (e.g., turnover time, block utilization, scope management, radiation safety), by utilizing process improvement initiatives using Lean, Six Sigma, or PDSA methodologies.
* Depending on the assigned procedural area, this role may include direct reports and associated people management and local budgetary responsibilities.
* Policy Development & Standardization
* Develop, review, implement, and maintain system-wide policies, protocols, and standard operating procedures related to assigned area of expertise. Partner with local leadership to support training, ensure consistent application, and monitor compliance across all sites.
* Ensure alignment with current regulatory and accreditation standards (e.g., AORN, DNV, JCAHO, AAMI, CMS, ACC). Support local leaders in preparing for surveys, audits, and inspections, ensuring alignment with standards and documentation requirements.
* Promote consistent application of best practices across all sites, including technology integration, including electronic health records (EHR), image management systems, and inventory systems.
* Training, Education & Competency
* Assist in design and deliver ongoing education programs, competency assessments, and professional development plans throughout system.
* Provide subject matter expertise for local leaders during staff onboarding and ongoing professional development activities.
* Act as a subject matter expert in regulatory standards and clinical technologies.
* Quality Improvement & Data Analysis
* Analyze system-wide performance data, audit results, and dashboard metrics to identify trends and improvement opportunities. Monitor and analyze key performance indicators (KPIs) such as volume trends, case mix, supply costs, radiation exposure, and outcomes.
* Collaborate with local teams and system leadership to develop and implement targeted quality improvement initiatives. Support audit activities and review documentation accuracy to ensure compliance with safety and quality standards.
* Participate in or lead root cause analyses and process improvement initiatives
* Regulatory & Compliance Support
* Stay current with evolving regulatory requirements and industry standards. including infection control, safety, and documentation standards.
* Serve as the internal resource for regulatory and accreditation readiness, supporting local managers in compliance efforts.
* Review and revise system-wide recommendations based on regulatory updates.
* Resource & Inventory Management
* Provide expert advice on system-wide capital equipment, instrumentation, supply chain strategies.
* Support budget planning and procurement efforts in collaboration with system and local hospital leadership.
Additional Responsibilities
* Participate in system-wide committees, task forces, and strategic initiatives.
* Foster a culture of safety, learning, and clinical excellence.
* Ensure adherence to PHI and confidentiality standards.
* Perform other duties as assigned.
* Performs other duties as assigned.
* Complies with all policies and standards.
* For specific duties and responsibilities, refer to documentation provided by the department during orientation.
* Must abide by all requirements to safely and securely maintain Protected Health Information (PHI) for our patients. Annual training, the UH Code of Conduct and UH policies and procedures are in place to address appropriate use of PHI in the workplace.
Qualifications
Education
* Bachelor's Degree Nursing, Healthcare Administration, Cardiovascular Technology, Radiologic Technology, or related field (Required)
* Master's Degree MSN, MHA, MBA, or related (Preferred)
Work Experience
* Minimum of 7-10 years of clinical and operational leadership experience in sterile processing (Required)
* 3+ years system-level or multi-site experience, preferably in a matrixed organization. (Required)
Knowledge, Skills, & Abilities
* Strong analytical and data interpretation skills. (Required proficiency)
* Excellent communication, facilitation, and relationship-building abilities. (Required proficiency)
* Ability to influence without direct authority and navigate complex organizational structures. (Required proficiency)
* Deep understanding of regulatory and accreditation standards. (Required proficiency)
Licenses and Certifications
* Active clinical license or certification (e.g., RN, RCIS, RCES, ARRT, CRCST, CSPDT, CER,CIS) required based on specialty. (Required)
* Specialty certifications (e.g., CNOR, CVRN, CEPS, Lean Six Sigma) (Preferred)
* Preferred Certifications: Certified Sterile Processing Manager (CSPM) or Certified Healthcare Leader (CHL).
Physical Demands
* Standing Occasionally
* Walking Occasionally
* Sitting Constantly
* Lifting Rarely up to 20 lbs
* Carrying Rarely up to 20 lbs
* Pushing Rarely up to 20 lbs
* Pulling Rarely up to 20 lbs
* Climbing Rarely up to 20 lbs
* Balancing Rarely
* Stooping Rarely
* Kneeling Rarely
* Crouching Rarely
* Crawling Rarely
* Reaching Rarely
* Handling Occasionally
* Grasping Occasionally
* Feeling Rarely
* Talking Constantly
* Hearing Constantly
* Repetitive Motions Frequently
* Eye/Hand/Foot Coordination Frequently
Travel Requirements
* 50% Hybrid/remote with regular onsite presence required. Up to 50% travel across system hospitals and procedural areas. Flexibility to adjust schedule to support early procedures or late meetings as needed.
Industrial Safety Manager
Cleveland, OH
Job Summary:
The Industrial Safety Manager plays a key role in shaping and maintaining a proactive safety culture across operational environments that may include distribution, production, and logistics functions. This position provides both strategic direction and day-to-day leadership by implementing safety programs, supporting leadership and employee training, and fostering organization-wide engagement to ensure workplace safety remains a core operational priority.
Requirements:
Several years of experience in workplace safety in industrial or operational settings such as production, logistics, or distribution environments.
Relevant industry-recognized safety certifications or advanced regulatory training are highly valued.
Practical understanding of workplace safety standards and regulatory compliance requirements applicable to operational environments.
General familiarity with transportation-related safety considerations and compliance practices is beneficial.
Knowledge of employee injury management processes and incident response procedures.
Demonstrated ability to collaborate across teams and drive initiatives through strong relationship-building and influence.
Welcome to ConsultNet, a premier national provider of technology talent and solutions. Our expertise spans across project services, contract-to-hire, direct search, and managed services onshore, nearshore, and hybrid. For over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact. Our comprehensive service offerings cover a wide range of technology and engineering positions across key markets nationwide. Learn more at .
We champion equality and inclusivity, proudly supporting an Equal Opportunity Employer policy. We welcome applicants regardless of Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other status protected by law.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
