Engineering Structures Scimago Jobs in Whitewater, CO

JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.

SHIFTS AVAILABLE

1st: 7:00 AM - 3:30 PM

2nd: 3:00 PM - 1:30 AM

ESSENTIAL DUTIES & RESPONSIBILITIES

- Safely perform all tasks.

- Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components

- Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.

- Operate a variety of CNC Mills or Lathes and other hand and power machines.

- Assemble cutting tools.

- Maintain 6S requirements in work area.

JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS

- Blueprint reading including Geometric Dimensioning & tolerancing

- Understand G and M codes/Mazatrol

- Capable of performing some heavy labor, ability to lift 50-75 lbs.

- Good communication skills (verbal and written)

- Good working knowledge of hand measuring and inspection tools

EDUCATION & EXPERIENCE REQUIREMENTS

- High School/GED or higher education, preferred

- 2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus

- Mazak Mill, Integrex, or other multi-axis machining experience, preferred.

- Or an equivalent combination of education, training or experience.

This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.

SHIFTS AVAILABLE

1st: 7:00 AM - 3:30 PM

2nd: 3:00 PM - 1:30 AM

ESSENTIAL DUTIES & RESPONSIBILITIES

- Safely perform all tasks.

- Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components

- Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.

- Operate a variety of CNC Mills or Lathes and other hand and power machines.

- Assemble cutting tools.

- Maintain 6S requirements in work area.

JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS

- Blueprint reading including Geometric Dimensioning & tolerancing

- Understand G and M codes/Mazatrol

- Capable of performing some heavy labor, ability to lift 50-75 lbs.

- Good communication skills (verbal and written)

- Good working knowledge of hand measuring and inspection tools

EDUCATION & EXPERIENCE REQUIREMENTS

- High School/GED or higher education, preferred

- 2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus

- Mazak Mill, Integrex, or other multi-axis machining experience, preferred.

- Or an equivalent combination of education, training or experience.

This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.

SHIFTS AVAILABLE

1st: 7:00 AM - 3:30 PM

2nd: 3:00 PM - 1:30 AM

ESSENTIAL DUTIES & RESPONSIBILITIES

- Safely perform all tasks.

- Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components

- Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.

- Operate a variety of CNC Mills or Lathes and other hand and power machines.

- Assemble cutting tools.

- Maintain 6S requirements in work area.

JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS

- Blueprint reading including Geometric Dimensioning & tolerancing

- Understand G and M codes/Mazatrol

- Capable of performing some heavy labor, ability to lift 50-75 lbs.

- Good communication skills (verbal and written)

- Good working knowledge of hand measuring and inspection tools

EDUCATION & EXPERIENCE REQUIREMENTS

- High School/GED or higher education, preferred

- 2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus

- Mazak Mill, Integrex, or other multi-axis machining experience, preferred.

- Or an equivalent combination of education, training or experience.

This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.

SHIFTS AVAILABLE

1st: 7:00 AM - 3:30 PM

2nd: 3:00 PM - 1:30 AM

ESSENTIAL DUTIES & RESPONSIBILITIES

- Safely perform all tasks.

- Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components

- Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.

- Operate a variety of CNC Mills or Lathes and other hand and power machines.

- Assemble cutting tools.

- Maintain 6S requirements in work area.

JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS

- Blueprint reading including Geometric Dimensioning & tolerancing

- Understand G and M codes/Mazatrol

- Capable of performing some heavy labor, ability to lift 50-75 lbs.

- Good communication skills (verbal and written)

- Good working knowledge of hand measuring and inspection tools

EDUCATION & EXPERIENCE REQUIREMENTS

- High School/GED or higher education, preferred

- 2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus

- Mazak Mill, Integrex, or other multi-axis machining experience, preferred.

- Or an equivalent combination of education, training or experience.

This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.

  SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM

ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.

JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools

EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.

This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.

  SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM

ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.

JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools

EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.

This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.

SHIFTS AVAILABLE

1st: 7:00 AM - 3:30 PM

2nd: 3:00 PM - 1:30 AM

ESSENTIAL DUTIES & RESPONSIBILITIES

- Safely perform all tasks.

- Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components

- Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.

- Operate a variety of CNC Mills or Lathes and other hand and power machines.

- Assemble cutting tools.

- Maintain 6S requirements in work area.

JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS

- Blueprint reading including Geometric Dimensioning & tolerancing

- Understand G and M codes/Mazatrol

- Capable of performing some heavy labor, ability to lift 50-75 lbs.

- Good communication skills (verbal and written)

- Good working knowledge of hand measuring and inspection tools

EDUCATION & EXPERIENCE REQUIREMENTS

- High School/GED or higher education, preferred

- 2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus

- Mazak Mill, Integrex, or other multi-axis machining experience, preferred.

- Or an equivalent combination of education, training or experience.

This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.

 
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM

ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.

JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools

EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.

This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Description: Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education.

This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed.

Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students.

MHS is hiring married couples to serve as Full-time Flex Houseparents.

In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home.

Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential.Responsibilities include:Providing daily supervision and mentorshipManaging household routines and student schedulesAdministering medications and ensuring student wellnessDriving students to activities, as well as planning and actively engaging in developmental and recreational activities with studentsLeading daily devotions and accompanying students to Sunday ChapelOverseeing budgeting and household reportingUpon hire, Flex Houseparents initially support various student homes and follow a working schedule of nine consecutive days on duty, followed by three days off.On weekdays, houseparents have unscheduled time while students are in school.

Flex Houseparents eventually transition into a Placed Houseparent role, where they live and work with the same group of students in their own student home.

Benefits include:Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more)Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savingsRelocation assistance and paid training providedPaid time off provided at designated times throughout the yearQualifications: Qualifications include:Experience working or volunteering with youthThis is a two-person role for couples legally married for at least two yearsBoth spouses must be age 27 or olderNo more than three dependent children may reside in the student homeCommitment to a smoke-free and weapon-free campus; no alcohol permitted while on dutyPet limitations: only fish and one dog of approved breeds allowedValid U.S.

driver’s license and ability to become certified to drive student home vansComfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited)High school diploma or GED requiredAbility to lift to 50 lbs.Demonstrated integrity and professionalism; MHS staff serve as role models for studentsThis is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses.

For consideration, both spouses must complete individual employment applications.

To learn more and apply, visit/>
.