Engineering Structures Scimago Jobs in Edwards
40 positions found — Page 2
J
Weapons - Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 seeks motivated and experienced Weapons System Integration Engineers in the analysis of host aircraft/store compatibility requirements for captive carriage and release/launch of Armament Systems in compliance with MIL-STD-1760, MIL-STD-1553, and Universal Armament Interface (UAI protocols).
This involves knowledge of electrical interface logic, logical, and logistical compatibility between US and foreign fighter/bomber/UAV aircraft, suspension and release equipment, and stores (including their embedded computer hardware and software systems).
Aircraft integration activities, aircraft integration meetings, and aircraft Systems Integration Laboratory (SIL) test activities to ensure an operator's perspective of aircraft integration and employment are successfully accomplished for weapon and carriage systems.
Airworthiness certification activities, to include participation in testing, flight clearance, safe separation and jettison testing, development of test plans technical reports and data analysis packages evaluating system and subsystem interfaces.
These interfaces include but are not limited to aircraft interfaces, ground subsystem interfaces, and interfaces associated with participant interoperability within the network (characteristics of which include radio frequency (RF), link margin, RF bandwidth and baseband modulation).
Responsible for providing real-time support for flight test from a mission control room.
Some knowledge in reading bit data, binary, hex, embedded systems, and bus data hierarchy and Python coding.
Ideal candidates will possess: Desired aircraft weapons flight test experience.
Ability to obtain and maintain Secret security clearance with eventual elevation to Top Secret Advanced knowledge and recognized ability in the technical/professional field DESIRED QUALIFICATIONS Mission Control Room experience for elevated risk weapons testing Ground test experience Test planning Safety planning Ability to work independently and within team setting Strong communication Ability to become a structures subject matter expert.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to 185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 seeks motivated and experienced Weapons System Integration Engineers in the analysis of host aircraft/store compatibility requirements for captive carriage and release/launch of Armament Systems in compliance with MIL-STD-1760, MIL-STD-1553, and Universal Armament Interface (UAI protocols).
This involves knowledge of electrical interface logic, logical, and logistical compatibility between US and foreign fighter/bomber/UAV aircraft, suspension and release equipment, and stores (including their embedded computer hardware and software systems).
Aircraft integration activities, aircraft integration meetings, and aircraft Systems Integration Laboratory (SIL) test activities to ensure an operator's perspective of aircraft integration and employment are successfully accomplished for weapon and carriage systems.
Airworthiness certification activities, to include participation in testing, flight clearance, safe separation and jettison testing, development of test plans technical reports and data analysis packages evaluating system and subsystem interfaces.
These interfaces include but are not limited to aircraft interfaces, ground subsystem interfaces, and interfaces associated with participant interoperability within the network (characteristics of which include radio frequency (RF), link margin, RF bandwidth and baseband modulation).
Responsible for providing real-time support for flight test from a mission control room.
Some knowledge in reading bit data, binary, hex, embedded systems, and bus data hierarchy and Python coding.
Ideal candidates will possess: Desired aircraft weapons flight test experience.
Ability to obtain and maintain Secret security clearance with eventual elevation to Top Secret Advanced knowledge and recognized ability in the technical/professional field DESIRED QUALIFICATIONS Mission Control Room experience for elevated risk weapons testing Ground test experience Test planning Safety planning Ability to work independently and within team setting Strong communication Ability to become a structures subject matter expert.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to 185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Navigation - Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 is looking for a Navigation/ Identification Friend or Foe engineers who are experienced with flight vehicles (Manned/Unmanned), guided munitions, and UAS systems.
The successful applicants will support Developmental Test & Evaluation of Navigation and guidance, and/or support Guidance, Navigation and Control development on advanced weapon systems to meet critical needs for warfighters.
Engineers in this position are responsible for the developmental test and evaluation and analysis of guidance, navigation and autopilot algorithms, and operational flight software.
Additionally, selected candidates will validate and verify performance and supporting ground and flight tests with pre-flight predictions and post-flight analyses.
Incumbents will review and provide input to Technical Review Board (TRB), Safety Review Board (SRB), and Report Integrated Product Teams (RIPT) meetings.
Candidates will also provide coordination (ground test to flight test) for all projects and assist in the coordination of input from allied engineering disciplines (avionics, armament, electronic warfare, flying qualities, performance, structures, subsystems, and signatures).
Qualifications: GNC, Signal Processing, and/or Modeling / Simulation experience Engineering experience in system applications to include at least one of the following: Digital and/or modern control systems Signal processing Verification and validation System-level performance assessments GPS/INS navigation systems, sensors, and algorithms Assured Positioning, Navigation, and Timing (APNT) systems, sensors, and algorithms for navigation in GPS-degraded environments Experience with MATLAB, Python, C, C++, and/or Object-Oriented design Experience with GNC and/or Signal Processing algorithms within a simulation or physical environment Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in Engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to $185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 is looking for a Navigation/ Identification Friend or Foe engineers who are experienced with flight vehicles (Manned/Unmanned), guided munitions, and UAS systems.
The successful applicants will support Developmental Test & Evaluation of Navigation and guidance, and/or support Guidance, Navigation and Control development on advanced weapon systems to meet critical needs for warfighters.
Engineers in this position are responsible for the developmental test and evaluation and analysis of guidance, navigation and autopilot algorithms, and operational flight software.
Additionally, selected candidates will validate and verify performance and supporting ground and flight tests with pre-flight predictions and post-flight analyses.
Incumbents will review and provide input to Technical Review Board (TRB), Safety Review Board (SRB), and Report Integrated Product Teams (RIPT) meetings.
Candidates will also provide coordination (ground test to flight test) for all projects and assist in the coordination of input from allied engineering disciplines (avionics, armament, electronic warfare, flying qualities, performance, structures, subsystems, and signatures).
Qualifications: GNC, Signal Processing, and/or Modeling / Simulation experience Engineering experience in system applications to include at least one of the following: Digital and/or modern control systems Signal processing Verification and validation System-level performance assessments GPS/INS navigation systems, sensors, and algorithms Assured Positioning, Navigation, and Timing (APNT) systems, sensors, and algorithms for navigation in GPS-degraded environments Experience with MATLAB, Python, C, C++, and/or Object-Oriented design Experience with GNC and/or Signal Processing algorithms within a simulation or physical environment Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in Engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to $185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Instrumentation Electrical Design Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES An Instrumentation Electrical Design Engineer performs a variety of engineering assignments in planning and overseeing research, design, development, manufacturing, testing, installation, integration, sustainment, operation, and maintenance of diverse software, electronic, and/or mechanical equipment and systems.
Employee will be responsible for the following functions/duties: Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements Verify and comply with engineering documentation standards and test procedures Prepare, deliver, and submit technical papers and perform engineering studies Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work Develop, maintain, and produce technical documentation and system/subsystem specifications Direct interface with customers at all levels from quotation to final design and test activities Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation Perform other job-related duties, as required REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor of Science in Engineering from an ABET-accredited academic institution and four (4) years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of two (2) years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area Working knowledge of computer systems and computer-based engineering tools Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills and the ability to work under deadlines The incumbent must possess a valid, state issued driver's license.
Must be able to obtain and maintain security clearance.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $105,510 to $146,653 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting to 20 pounds, constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES An Instrumentation Electrical Design Engineer performs a variety of engineering assignments in planning and overseeing research, design, development, manufacturing, testing, installation, integration, sustainment, operation, and maintenance of diverse software, electronic, and/or mechanical equipment and systems.
Employee will be responsible for the following functions/duties: Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements Verify and comply with engineering documentation standards and test procedures Prepare, deliver, and submit technical papers and perform engineering studies Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work Develop, maintain, and produce technical documentation and system/subsystem specifications Direct interface with customers at all levels from quotation to final design and test activities Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation Perform other job-related duties, as required REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A Bachelor of Science in Engineering from an ABET-accredited academic institution and four (4) years of related engineering experience, or an accredited Master of Science in Engineering and a minimum of two (2) years of related engineering experience, or an accredited doctorate degree in engineering are required for this position.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area Working knowledge of computer systems and computer-based engineering tools Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills and the ability to work under deadlines The incumbent must possess a valid, state issued driver's license.
Must be able to obtain and maintain security clearance.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $105,510 to $146,653 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting to 20 pounds, constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Radar Fusion - Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 seeks motivated and experienced junior to senior Radar Fusion engineers to support flight test operations at Edwards AFB.
Candidates will be responsible for testing radar systems that integrate radar fusion techniques to enhance object detection and tracking capabilities.
Contribute to developmental test & evaluation and apply Model‑Based Systems Engineering (MBSE) practices to create and maintain digital system models.
Collaborate with cross‑functional teams to validate requirements and ensure seamless integration.
Desired Experience: Signal Processing: Proficient in signal processing algorithms and radar signal processing techniques to optimize radar system performance.
Collaboration: Work closely with cross-functional teams, including software and hardware engineers, to ensure radar systems meet industry standards and safety regulations.
Radar Fusion Engineers must stay current with the latest advancements in radar technology and have a solid understanding of radar principles and related fields.
Testing and Validation: Conduct rigorous simulations, ground and flight tests to verify radar system functionality and ensure compliance with safety standards.
Technical Documentation: Assist in the development of technical documentation, interim reports, and maintain databases for system and subsystem specifications.
Data Analysis: Perform Radar Fusion engineering data analysis and modeling for radar and electronic‑warfare subsystems.
Desired Qualifications: Experience in systems engineering, developmental test and evaluation, and application of processes and data analysis tools.
Experience with Radar and Electronic Warfare principles, and sensor operations Knowledge of Low Observables (LO) applications Strong oral and written communication skills Experience working independently and in cross functional or small technical teams Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in Engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to $185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 seeks motivated and experienced junior to senior Radar Fusion engineers to support flight test operations at Edwards AFB.
Candidates will be responsible for testing radar systems that integrate radar fusion techniques to enhance object detection and tracking capabilities.
Contribute to developmental test & evaluation and apply Model‑Based Systems Engineering (MBSE) practices to create and maintain digital system models.
Collaborate with cross‑functional teams to validate requirements and ensure seamless integration.
Desired Experience: Signal Processing: Proficient in signal processing algorithms and radar signal processing techniques to optimize radar system performance.
Collaboration: Work closely with cross-functional teams, including software and hardware engineers, to ensure radar systems meet industry standards and safety regulations.
Radar Fusion Engineers must stay current with the latest advancements in radar technology and have a solid understanding of radar principles and related fields.
Testing and Validation: Conduct rigorous simulations, ground and flight tests to verify radar system functionality and ensure compliance with safety standards.
Technical Documentation: Assist in the development of technical documentation, interim reports, and maintain databases for system and subsystem specifications.
Data Analysis: Perform Radar Fusion engineering data analysis and modeling for radar and electronic‑warfare subsystems.
Desired Qualifications: Experience in systems engineering, developmental test and evaluation, and application of processes and data analysis tools.
Experience with Radar and Electronic Warfare principles, and sensor operations Knowledge of Low Observables (LO) applications Strong oral and written communication skills Experience working independently and in cross functional or small technical teams Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in Engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to $185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Instrumentation Operations Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
What You Will Do with JT4 The Instrumentation Operation Engineer has the responsibility of modification, installation, testing, evaluation, repair, and documentation of airborne test instrumentation, data acquisition systems, as well as the operation and performance of ground support equipment.
FUNCTIONS AND DUTIES Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments.
Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines.
Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects.
Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements.
Verify and comply with engineering documentation standards and test procedures.
Prepare, deliver, and submit technical papers and perform engineering studies.
Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work.
Develop, maintain, and produce technical documentation and system/subsystem specifications.
Direct interface with customers at all levels from quotation to final design and test activities.
Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications.
Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation.
Perform other job-related duties, as required.
EXPERIENCE Analog and digital electronic fundamentals, familiar with various sensors like strain gauges, accelerometers, and thermal sensors, while also possessing an understanding of digital logic and EU conversions Multi-meter, O-scope, spectrum analyzer, signal generator, to accomplish tasks such as checkout, calibration, troubleshooting and repair Schematics, mechanical drawings, wire diagrams, wire repair, block diagrams and technical publications IRIG 106 Telemetry Standards & TTC hardware/software A variety of electrical, instrumentation, and avionics on aircraft including bench testing REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with a minimum of two years of related engineering experience or have an accredited doctorate degree in engineering are required for this position.
Incumbent will be required to qualify for and maintain a government security clearance and must have a valid, current state driver's license.
Must have or be able to obtain a DOD security clearance.
Must be able to obtain special access.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs.
Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area.
Working knowledge of computer systems and computer-based engineering tools.
Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
Excellent communication and analytical skills.
Planning/organizational skills and the ability to work under deadlines.
The candidate must possess a valid, state issued driver's license.
Must be able to obtain and maintain security clearance.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $92,000 to $160,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting to 20 pounds, constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
What You Will Do with JT4 The Instrumentation Operation Engineer has the responsibility of modification, installation, testing, evaluation, repair, and documentation of airborne test instrumentation, data acquisition systems, as well as the operation and performance of ground support equipment.
FUNCTIONS AND DUTIES Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments.
Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines.
Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects.
Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements.
Verify and comply with engineering documentation standards and test procedures.
Prepare, deliver, and submit technical papers and perform engineering studies.
Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work.
Develop, maintain, and produce technical documentation and system/subsystem specifications.
Direct interface with customers at all levels from quotation to final design and test activities.
Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications.
Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation.
Perform other job-related duties, as required.
EXPERIENCE Analog and digital electronic fundamentals, familiar with various sensors like strain gauges, accelerometers, and thermal sensors, while also possessing an understanding of digital logic and EU conversions Multi-meter, O-scope, spectrum analyzer, signal generator, to accomplish tasks such as checkout, calibration, troubleshooting and repair Schematics, mechanical drawings, wire diagrams, wire repair, block diagrams and technical publications IRIG 106 Telemetry Standards & TTC hardware/software A variety of electrical, instrumentation, and avionics on aircraft including bench testing REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with a minimum of two years of related engineering experience or have an accredited doctorate degree in engineering are required for this position.
Incumbent will be required to qualify for and maintain a government security clearance and must have a valid, current state driver's license.
Must have or be able to obtain a DOD security clearance.
Must be able to obtain special access.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs.
Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area.
Working knowledge of computer systems and computer-based engineering tools.
Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
Excellent communication and analytical skills.
Planning/organizational skills and the ability to work under deadlines.
The candidate must possess a valid, state issued driver's license.
Must be able to obtain and maintain security clearance.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $92,000 to $160,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting to 20 pounds, constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Performance & Flying Qualities - Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 seeks motivated and experienced Performance and Flying Qualities Engineers to support flight test operations at Edwards AFB located in California.
P&FQ ENGINEER RESPONSIBILITIES: Be part of engineering team in test strategy development in concert with program office focal points.
Provide assessments of pre-CDR test planning processes and documents.
Significant contributor of a wide variety of flight planning, execution, analysis, and reporting documents.
Junior to Senior experience of P&FQ test and evaluation engineering to include envelope expansion, air data, performance, flying qualities, and flight controls.
Provides technical consultation to other organizations or customers.
Directs interface and liaison with internal and external customers at all levels of test activities, design reviews, and technical working group meetings to comply with requirements and specifications.
Reviews completion and implementation of systems additions and/or enhancements and recommends corrections in technical application and analysis to management.
Prepares, delivers, and submits technical papers and performs data analysis.
Maintains technical project responsibility for assigned tasks and advises management of progress in support of the technical and administrative direction of project operations.
DESIRED QUALIFICATIONS Must use excellent communications skills, both verbal and written, in day-to-day project activities as well as in briefing customers and in writing reports and proposals.
Must have a working knowledge of computer systems and computer-based engineering tools.
Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in Engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to $185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 seeks motivated and experienced Performance and Flying Qualities Engineers to support flight test operations at Edwards AFB located in California.
P&FQ ENGINEER RESPONSIBILITIES: Be part of engineering team in test strategy development in concert with program office focal points.
Provide assessments of pre-CDR test planning processes and documents.
Significant contributor of a wide variety of flight planning, execution, analysis, and reporting documents.
Junior to Senior experience of P&FQ test and evaluation engineering to include envelope expansion, air data, performance, flying qualities, and flight controls.
Provides technical consultation to other organizations or customers.
Directs interface and liaison with internal and external customers at all levels of test activities, design reviews, and technical working group meetings to comply with requirements and specifications.
Reviews completion and implementation of systems additions and/or enhancements and recommends corrections in technical application and analysis to management.
Prepares, delivers, and submits technical papers and performs data analysis.
Maintains technical project responsibility for assigned tasks and advises management of progress in support of the technical and administrative direction of project operations.
DESIRED QUALIFICATIONS Must use excellent communications skills, both verbal and written, in day-to-day project activities as well as in briefing customers and in writing reports and proposals.
Must have a working knowledge of computer systems and computer-based engineering tools.
Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in Engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to $185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Instrumentation Operation Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
What You Will Do with JT4 The Instrumentation Operation Engineer has the responsibility of modification, installation, testing, evaluation, repair, and documentation of airborne test instrumentation, data acquisition systems, as well as the operation and performance of ground support equipment.
FUNCTIONS AND DUTIES Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments.
Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines.
Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects.
Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements.
Verify and comply with engineering documentation standards and test procedures.
Prepare, deliver, and submit technical papers and perform engineering studies.
Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work.
Develop, maintain, and produce technical documentation and system/subsystem specifications.
Direct interface with customers at all levels from quotation to final design and test activities.
Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications.
Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation.
Perform other job-related duties, as required.
EXPERIENCE Analog and digital electronic fundamentals, familiar with various sensors like strain gauges, accelerometers, and thermal sensors, while also possessing an understanding of digital logic and EU conversions Multi-meter, O-scope, spectrum analyzer, signal generator, to accomplish tasks such as checkout, calibration, troubleshooting and repair Schematics, mechanical drawings, wire diagrams, wire repair, block diagrams and technical publications IRIG 106 Telemetry Standards & TTC hardware/software A variety of electrical, instrumentation, and avionics on aircraft including bench testing REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with a minimum of two years of related engineering experience or have an accredited doctorate degree in engineering are required for this position.
Incumbent will be required to qualify for and maintain a government security clearance and must have a valid, current state driver's license.
Must have or be able to obtain a DOD security clearance.
Must be able to obtain special access.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs.
Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area.
Working knowledge of computer systems and computer-based engineering tools.
Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
Excellent communication and analytical skills.
Planning/organizational skills and the ability to work under deadlines.
The candidate must possess a valid, state issued driver's license.
Must be able to obtain and maintain security clearance.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $92,000 to $160,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting to 20 pounds, constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
What You Will Do with JT4 The Instrumentation Operation Engineer has the responsibility of modification, installation, testing, evaluation, repair, and documentation of airborne test instrumentation, data acquisition systems, as well as the operation and performance of ground support equipment.
FUNCTIONS AND DUTIES Perform as a lead of a development, sustainment, or operations and maintenance team on more complex engineering assignments.
Independently perform a range of design, development, analysis, or review tasks under generally established project deadlines.
Complete design specifications, analyses, or design reviews for complex projects Generate complete design specifications for more complex projects.
Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements.
Verify and comply with engineering documentation standards and test procedures.
Prepare, deliver, and submit technical papers and perform engineering studies.
Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work.
Develop, maintain, and produce technical documentation and system/subsystem specifications.
Direct interface with customers at all levels from quotation to final design and test activities.
Acts as liaison for design reviews and technical working group meetings to comply with requirements and specifications.
Conduct site visits and experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendation.
Perform other job-related duties, as required.
EXPERIENCE Analog and digital electronic fundamentals, familiar with various sensors like strain gauges, accelerometers, and thermal sensors, while also possessing an understanding of digital logic and EU conversions Multi-meter, O-scope, spectrum analyzer, signal generator, to accomplish tasks such as checkout, calibration, troubleshooting and repair Schematics, mechanical drawings, wire diagrams, wire repair, block diagrams and technical publications IRIG 106 Telemetry Standards & TTC hardware/software A variety of electrical, instrumentation, and avionics on aircraft including bench testing REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with a minimum of two years of related engineering experience or have an accredited doctorate degree in engineering are required for this position.
Incumbent will be required to qualify for and maintain a government security clearance and must have a valid, current state driver's license.
Must have or be able to obtain a DOD security clearance.
Must be able to obtain special access.
In addition, an Engineer III must possess the following qualifications: Mastery of concepts, principles, and practices of engineering that enable the employee to serve as a technical authority on projects relating to the specific programs.
Knowledge and skill sufficient to apply the latest developments in engineering to solve problems in the specialty area.
Working knowledge of computer systems and computer-based engineering tools.
Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
Excellent communication and analytical skills.
Planning/organizational skills and the ability to work under deadlines.
The candidate must possess a valid, state issued driver's license.
Must be able to obtain and maintain security clearance.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $92,000 to $160,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting to 20 pounds, constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Autonomy - Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 is hiring employee's entry to senior level Autonomy Engineers.
As an Autonomy Engineer, you will contribute directly to the Developmental Integration & Evaluation, and deployment of 6th Generation aircraft.
Develop test plans and procedures for the integration, characterization, and testing of complex test Navigation, Defense Aviation Systems, Intelligence, Surveillance, and Reconnaissance platforms, Command & Control, Automation, Flight Controls, Guidance Navigation & Control, and Inertial Navigation Systems, Global Navigation Satellite System Integration, and Navigation Error Modeling.
Execute tests, collect and analyze test data to optimize performance, and support system design enhancements.
Perform system performance modeling to demonstrate performance compliance in support of the development, characterization, and testing of new deliverable test systems.
Work with engineering staff to document changes made to hardware and deviations from standard procedures as necessary.
Preferred qualifications: Experience in Flight Test Engineering.
Experience building digital models and simulations Unmanned Aerial Systems.
Experience validating and verifying navigation systems in operational test environments.
Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).
REQUIRMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to $185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 is hiring employee's entry to senior level Autonomy Engineers.
As an Autonomy Engineer, you will contribute directly to the Developmental Integration & Evaluation, and deployment of 6th Generation aircraft.
Develop test plans and procedures for the integration, characterization, and testing of complex test Navigation, Defense Aviation Systems, Intelligence, Surveillance, and Reconnaissance platforms, Command & Control, Automation, Flight Controls, Guidance Navigation & Control, and Inertial Navigation Systems, Global Navigation Satellite System Integration, and Navigation Error Modeling.
Execute tests, collect and analyze test data to optimize performance, and support system design enhancements.
Perform system performance modeling to demonstrate performance compliance in support of the development, characterization, and testing of new deliverable test systems.
Work with engineering staff to document changes made to hardware and deviations from standard procedures as necessary.
Preferred qualifications: Experience in Flight Test Engineering.
Experience building digital models and simulations Unmanned Aerial Systems.
Experience validating and verifying navigation systems in operational test environments.
Candidates must have, or be able to obtain, a Secret Clearance with the eventual upgrade to Top Secret clearance and must be eligible for Sensitive Compartmented Information (SCI).
REQUIRMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and four years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to $185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Engineer IV - JSE Edwards AFB, CA
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
RANGE POSITION DESCRIPTION
- ESSENTIAL FUNCTIONS AND DUTIES This role requires a versatile and skilled engineer to provide critical support to the Joint Simulation Environment (JSE) program.
The position involves managing technical requirements, developing test plans, and creating engineering software tools to advance modeling and simulation capabilities.
The ideal candidate will integrate seamlessly with ongoing test and training activities.
Key Responsibilities: Provide direct engineering support to manage existing and future modeling and simulation (M&S) Technical Requirements.
Develop, implement, and maintain engineering software tools using Python or C++ to support system analysis and operations.
Support test planning working groups, technical design reviews, and other related testing activities.
DESIRED QUALIFICATIONS Demonstrated experience in software development with Python or C++.
Strong communication, and analytical skills with a proven ability to work in a technical team environment.
Experience in developing and managing technical plans or requirements.
Working knowledge of computer systems and integrated software application programs.
Experience with the Joint Simulation Environment (JSE).
Knowledge of 5th Gen aircraft systems (e.g., F-22, F-35).
Prior experience in a modeling and simulation environment.
Basic understanding of statistics and data analysis principles.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The incumbent must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience.
The incumbent must have comprehensive knowledge of concepts, principles, and practices of engineering to provide consultative services on development programs and in the design and development of systems and components.
The position requires knowledge and skill sufficient to apply the latest developments in engineering to solve complex problems in the specialty area.
The incumbent must have excellent communication and analytical skills and must possess effective planning/organizing skills.
The incumbent must have a working knowledge of computer systems and computer-based engineering tools.
The incumbent must possess well-developed leadership skills and have the ability to investigate, troubleshoot, and design solutions to problems from a broad prospective.
The incumbent must possess a valid, state-issued driver's license.
Must be able to obtain and maintain security clearance.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $125,000 to 150,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting to 20 pounds, constant sitting with occasional use of a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
RANGE POSITION DESCRIPTION
- ESSENTIAL FUNCTIONS AND DUTIES This role requires a versatile and skilled engineer to provide critical support to the Joint Simulation Environment (JSE) program.
The position involves managing technical requirements, developing test plans, and creating engineering software tools to advance modeling and simulation capabilities.
The ideal candidate will integrate seamlessly with ongoing test and training activities.
Key Responsibilities: Provide direct engineering support to manage existing and future modeling and simulation (M&S) Technical Requirements.
Develop, implement, and maintain engineering software tools using Python or C++ to support system analysis and operations.
Support test planning working groups, technical design reviews, and other related testing activities.
DESIRED QUALIFICATIONS Demonstrated experience in software development with Python or C++.
Strong communication, and analytical skills with a proven ability to work in a technical team environment.
Experience in developing and managing technical plans or requirements.
Working knowledge of computer systems and integrated software application programs.
Experience with the Joint Simulation Environment (JSE).
Knowledge of 5th Gen aircraft systems (e.g., F-22, F-35).
Prior experience in a modeling and simulation environment.
Basic understanding of statistics and data analysis principles.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The incumbent must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience.
The incumbent must have comprehensive knowledge of concepts, principles, and practices of engineering to provide consultative services on development programs and in the design and development of systems and components.
The position requires knowledge and skill sufficient to apply the latest developments in engineering to solve complex problems in the specialty area.
The incumbent must have excellent communication and analytical skills and must possess effective planning/organizing skills.
The incumbent must have a working knowledge of computer systems and computer-based engineering tools.
The incumbent must possess well-developed leadership skills and have the ability to investigate, troubleshoot, and design solutions to problems from a broad prospective.
The incumbent must possess a valid, state-issued driver's license.
Must be able to obtain and maintain security clearance.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $125,000 to 150,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting to 20 pounds, constant sitting with occasional use of a computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
J
Electro Optics/Infrared - Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 has an immediate need for Electro Optics/Infrared (EO/IR) engineers to support technical work and professional engineering in the development, sustainment, and operation of unique EO/IR systems to support the USAF Test & Evaluation mission.
This involves systems engineering from inception to operation, including requirements development, modeling and simulation, acquisition, validation, verification, operation, and sustainment, both individually and as part of a team.
Job Description Develop plans and procedures for the integration, characterization, and testing of complex EO/IR test capabilities.
Play a significant role in the definition and development of EO/IR test products.
Develop system specifications, including design verification methods, calibration, and test procedures for EO/IR test systems.
Execute tests, collect and analyze test data to optimize performance, and support system design enhancements.
Perform system performance modeling, tolerance analysis, and requirements flow-down analysis to demonstrate performance compliance in support of the development, characterization, and testing of new deliverable test systems.
Collaborate with Software Engineering to develop tests for infrared/visible cameras, laser tests, and test equipment control for both deliverable and in-house test equipment.
Work with engineering staff to document changes made to hardware and deviations from standard procedures as necessary.
Conduct concept design and analysis to support potential new customer applications.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to 185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JT4 will be hiring multiple candidates for this position with varying experience and skill levels.
Salary ranges will be based on skill level and education.
JOB DUTIES
- ESSENTIAL FUNCTIONS JT4 has an immediate need for Electro Optics/Infrared (EO/IR) engineers to support technical work and professional engineering in the development, sustainment, and operation of unique EO/IR systems to support the USAF Test & Evaluation mission.
This involves systems engineering from inception to operation, including requirements development, modeling and simulation, acquisition, validation, verification, operation, and sustainment, both individually and as part of a team.
Job Description Develop plans and procedures for the integration, characterization, and testing of complex EO/IR test capabilities.
Play a significant role in the definition and development of EO/IR test products.
Develop system specifications, including design verification methods, calibration, and test procedures for EO/IR test systems.
Execute tests, collect and analyze test data to optimize performance, and support system design enhancements.
Perform system performance modeling, tolerance analysis, and requirements flow-down analysis to demonstrate performance compliance in support of the development, characterization, and testing of new deliverable test systems.
Collaborate with Software Engineering to develop tests for infrared/visible cameras, laser tests, and test equipment control for both deliverable and in-house test equipment.
Work with engineering staff to document changes made to hardware and deviations from standard procedures as necessary.
Conduct concept design and analysis to support potential new customer applications.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE The candidate must have a Bachelor of Science in Engineering from an ABET-accredited academic institution and 4 years of related engineering experience or have an accredited Master of Science in Engineering with at least 2 years of related engineering experience or have an accredited doctoral degree in engineering.
The candidate must have mastery of concepts, principles, and practices of engineering that enables the employee to serve as a technical authority on projects relating to the specific programs.
The position requires sufficient knowledge and skill to apply the latest developments in engineering to solve problems in the specialty area along with excellent communication and analytical skills.
The candidate must have a working knowledge of computer systems and computer-based engineering tools and possess planning/organizing skills.
The position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
The candidate must possess a valid, state-issued driver's license.
The candidate must be able to obtain and maintain a DoD security clearance up to top secret with special access.
Must be a U.S.
citizen.
SALARY The expected salary range for this position is $110,000 to 185,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
Not Specified
jobs by
✓ All jobs loaded