Engineering Structures Scimago Jobs in Bothell, WA
100 positions found — Page 4
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components.
In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies.
Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies.
You will operate advanced material handling equipment to efficiently load and unload engines and struts.
Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence.
If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.Maintain personal and tool certifications, ensuring compliance with safety and operational standards.Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.
Do you meet this requirement?Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.Ability to lift up to 35 pounds.This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.Proficiency in reading, writing, and speaking EnglishPreferred Qualifications:1+ years of experience performing aircraft structural work or equivalate.1+ years of experience using high impact vibratory tools; such as bucking/riveting.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic programConflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Safety Sensitive Statement:This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Sept.
04, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Join Our Winning Team at Boeing!Boeing Commercial Airplanes (BCA) is hiring Mid-Level or Senior Propulsion Engineers specializing in Engine Performance to support our Propulsion System Engineering in the Puget Sound area of Washington.Engine Operability LeadIn the Engine Operability role, you will play a critical part in engine and airframe integration, leveraging a robust Engine Performance and Operability background, focused on achieving safe and airworthy Propulsion System designs.
You will be joining a dynamic team of engineers and leaders who prioritize technical growth and mentorship within their team.
The ideal candidate balances a forward-thinking approach, strong data analysis skills, leadership skills, and clear technical communication abilities to resolve complex engine operability challenges.This work supports our Propulsion Organization; a world-class team of over 1000 engineers across the product life cycle from product development to certification to fleet support.At Boeing, we are dedicated to safety, quality, innovation, and technical excellence.
Our team designs, builds, certifies, delivers, and maintains products and services that provide superior safety, quality, and value to our customers.
Join us in Engine Operability and help us redefine what's possible.Engine Performance We are looking for a motivated individual with a passion for engines and airplanes, eager to leverage their engine performance expertise to enhance aircraft capabilities.
In this role, you will play a critical part in generating and integrating engine data into cross-functional aircraft performance assessments.
You will be joining a dynamic team of engineers and leaders who prioritize technical growth and mentorship within their team.
The ideal candidate balances a forward-thinking approach, strong data analysis skills, and clear technical communication abilities to resolve complex engine performance challenges.
This work supports our Propulsion Organization; a world-class team of over 1000 engineers across the product life cycle from product development to certification to fleet support.
At Boeing, we are dedicated to safety, quality, innovation, and technical excellence.
Our team designs, builds, certifies, delivers, and maintains products and services that provide superior safety, quality, and value to our customers.
Join us in Engine Performance and help us redefine what's possible.Position Responsibilities :Analyzes steady-state engine performance and detailed thermodynamic cycle data, demonstrating an in-depth understanding of gas turbine engine thermodynamics and performance characteristics.Assesses engine operation across various conditions and certify operating characteristics, applying knowledge of regulatory compliance processes (FAA & EASA).Analyzes and communicates engine performance impacts on airplane subsystem performance, including proficiency in calculating in-flight thrust and understanding its implications.Collaborates with disciplines across the airplane (e.g.
Aero, Environmental Controls, Mech/Hyd, and Thermal) to provide engine performance expertise on assessing cross-functional system impacts.Ensures compliance with regulatory requirements and contributes to certification documentation, showcasing familiarity with means-of-compliance.Conducts data analysis and risk assessments for flight tests, utilizing strong analytical skills to support flight test planning and performance evaluations.Coordinates with engine supplier(s) on engine/airplane performance throughout an airplane program's lifecycle.
Supports product improvement initiatives and knowledge sharing within the team, committing to ongoing education in emerging technologies and methodologies in engine performance.Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, Aerospace Engineering, Mechanical Engineering 1+ years experience in propulsion and thermodynamicsPreferred Qualifications (Desired Skills/Experience):9+ years of related work experience or an equivalent combination of education (Master's, Ph D) and experience.Foundational knowledge of gas turbine engine operation and thermodynamicsExperience with engine performance modeling tools & methodsProficiency with Linux/Unix computing systems and shell scriptingFamiliarity with regulatory requirements for engine and airplane certification (e.g., 14 CFR Part 25, Part 33)Experience with integrated airplane simulation and engine model developmentProficiency with NPSS modeling and engine cycle model development and analysisPrior involvement in engine certification programs and/or flight test data analysisAdvanced knowledge of engine operability, icing, and transient analysisFamiliarity with propulsion system audits and compliance documentationStrong written and verbal communication skills
Experience working with engine suppliers and cross-functional teamsDrug Free Workplace:Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union: This is a union-represented position.Relocation: This position offers relocation based on candidate eligibility.
Note: Basic relocation will be offered for eligible internal candidates.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range Mid-Level (level 3): $114,750
- $155,250Summary pay range Senior (level 4): $138,550
- $187,450Applications for this position will be accepted until Mar.
24, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Everett, Washington.
As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations. Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical. A Color Vision Certification may be necessary for portions of this job. You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations. Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft.
Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections.
Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments.
Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment.
Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules.
Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.
Interpret and adhere to airworthiness directives, service bulletins, and other approved data.
Apply mathematical calculations to set up and use precision measuring tools for accurate measurements.
Create production aids as needed to facilitate work assignments.
Maintain necessary certifications, licenses, and permits for assigned work.
Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights up to 35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction).
Must be willing to work any shift, including days, evenings, nights, and weekends.
Preferred Qualifications:
FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.
5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience)
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.
Safety Sensitive Statement:
This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 06, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Defense, Space & Security (BDS) Mobility, Surveillance & Bombers (MS&B) is seeking KC-46 Mission Systems Avionics Engineers to join the KC-46 team as equipment managers in Everett, WA or Tukwila, WA .
This role will primarily be responsible for supporting engineering design, integration, test, certification, and hardware/software management for assigned mission systems avionics sub-systems.The Boeing KC-46 Pegasus is the USAF's new aerial refueling tanker aircraft designed to support multi-role missions including refueling, cargo/passenger transport, and medevac airlift.
The KC-46 is a military commercial derivative aircraft based on the Boeing 767-2 C aircraft and modified per USAF specifications for the primary mission of aerial refueling US and Allied aircraft using either the Hose & Drogue systems or the Boom.
The KC-46 is also equipped with a suite of self-defensive and tactical situational awareness systems that allows the aircraft to get closer to the fight when supporting combat missions.Our teams are currently hiring for a broad range of experience levels including Associate, Mid-Level or Senior Level Engineers.Position Responsibilities:Support the engineering design, development, analysis, testing, and certification of the mission avionics systems to ensure seamless integration with software and higher-level systems and platforms.Support the design, development, validation, and verification of system level requirements.Assist in the development of test plans and procedures in support of certification activities.Coordinate system-level integration for mission avionics hardware and software.Support the definition and execution of critical tests of various types to validate the performance of designs against system requirements.Provide technical management of relevant aspects of critical suppliers and Boeing software team members to ensure compliance with design requirements; support for products will encompass the entire lifecycle including proposal, development, production, and in-service support as well as flight and laboratory testing.Gather information to support proposal development and conduct trade studies for future upgrades and new business opportunities.Coordinate and ensure FAA, military certification, and Boeing airworthiness activities for the mission avionics systems and its components.Coordinate and consult with specialty engineering Integrated Product Teams (IPTs) such as safety, electromagnetic emissions, and cybersecurity.Provide troubleshooting support for production labs and aircraft when technical issues occur.Conduct technical issue investigations and Root Cause and Corrective Actions (RCCAs).This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.Basic Qualifications (Required Skills/Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.1+ years of experience in engineering.Preferred Qualifications (Desired Skills/Experience): Level 2: 1 or more years' related work experience or an equivalent combination of education and experience.
Level 3: 3 or more years' related work experience or an equivalent combination of education and experience.
Level 4: 5 or more years' related work experience or an equivalent combination of education and experience.
An ABET-accredited Bachelor's degree in electrical engineering or a Master's/Ph D in electrical engineering.Experience with Software Development Processes.Experience with Radio Frequency (RF) engineering principles.Experience with defensive systems.Experience with data networks.Experience with communication systems.Experience with navigation systems.Experience with flight management systems.Experience with mission control systems.Experience working with FAA and/or Military type certification requirements.Experience troubleshooting avionic equipment, general electronics, and/or aircraft systems.Experience with Equipment Manager (EM) Responsibilities for Avionics Line Replaceable Units (LRUs).Experience in hardware and software integration.Experience in data analysis and Root Cause Corrective Action (RCCA).Experience in Technical Subcontract Management working with suppliers.Experience developing requirements and performing requirements decomposition.Experience evaluating aircraft maintenance requirements, certifications or airworthiness directives.Relocation: This position offers relocation based on candidate eligibility.
Note: Basic relocation will be offered for eligible internal candidates.Conflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union:This is a union-represented position.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range for Associate level (Level 2): $98,600
- $133,400Summary pay range for Mid-Level level (Level 3): $119,850
- $162,150Summary pay range for Senior level (Level 4): $146,200
- $197,800Applications for this position will be accepted until Apr.
01, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Security ClearanceThis position requires the ability to obtain a U.
S.
Security Clearance for which the U.
S.
Government requires U.
S.
Citizenship.
An interim and/or final U.
S.
Secret Clearance Post-Start is required.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.The Enterprise Certification Processes team is seeking a Mid-Level (Level 3) or Senior (Level 4) Certification Systems Engineer
- Regulatory Administration & Airworthiness to join our team in Everett, WA.
If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we invite your application.The Regulatory Administration & Airworthiness (RA&A) Enterprise Certification Processes team is centrally responsible for integration of certification processes across our Global Enterprise (Commercial, Defense and Global Services).
Team members grow to become experts in the certification business and solve technical issues across the certification value stream.
We are owners of processes and documents, manage change and drive efficiency/ease of compliance all from a variety of sources.Understanding of the Boeing ODA Procedures Manual (BPM) and affected processes and procedures is strongly desired.
Experience working with the FAA is also strongly desired.
This position will interface with ODA Unit members such as Project Administrators and Engineering Unit Members.The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere.
The team enjoys problem solving through, developing action, data analysis and driving systems level solutions.
It is a dynamic and highly visible place of work.Position Overview:Leads/Contributes to cross-functional teams resulting in resolution of technical and certification issues.Coordinates technical messaging and partnering with the FAA on regulatory issuesDevelops strategic action plans for changes to certification processes and execute those plans through completion.Contributes to root cause corrective action plans for development and execution of noncompliance's, voluntary disclosures, informal corrective actions, formal corrective actions, etc.
including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans.Working knowledge of Boeing's Organization Delegation Authorization (ODA) procedures manual.Ensures proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance.Participates in establishing and promoting global regulatory advocacy strategies, trainings, tools, and methods.Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Level 3: 5+ years of related work experience or an equivalent combination of education and experience Level 4: 9+ years of related work experience or an equivalent combination of education and experience Experience working directly with the FAA and/or ODA on Type Certification projects 3+ years of experience in developing and/or contributing to processes, policies, and procedures in a regulated industry 3+ years of experience working in the Aerospace industry Technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)Preferred Qualifications (Desired Skills and Experience): Master's degree in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science Experience working as a Project Administrator (PA) or Design Approval Engineer (DAE) highly valued and encouraged to apply.
Experience working across the certification value stream.
Experience working with Type Authorization Inspection (TIA) Experience with certification processes Boeing uses to comply with 14 CFR 21.93, 21.95 and 21.97 Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts Experience developing presentations and presenting to multiple levels of an organization.
Experience investigating and finding solutions to complex technical or regulatory issues.
Experience recognizing and balance conflicting priorities.
Strong technical writing abilities.
Strong presentation skills.
Experience writing, reviewing, or approving Certification plans.Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range :Experienced (Level 3): $114,750
- $155,250Senior (Level 4) $141,100
- $190,900 Applications for this position will be accepted until Mar.
25, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications:
Experience inspecting welds / welds certification
Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications:
Experience inspecting welds / welds certification
Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications:
Experience inspecting welds / welds certification
Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington .This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety.
If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere.
The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions.
This is a dynamic and highly visible environment.Primary responsibilities:Provides technical guidance and training relative to complex safety and airworthiness mattersCoordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teamsReview certification plans, write letters to regulators, and understand compliance processLeading cross-functional teams resulting in resolution of technical issues.Coordinate technical messaging and partnering with the FAA on regulatory issuesOwn, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidanceDevelop strategic action plans for changes to certification processes and execute those plans through completionContribute to root cause corrective action plans for development and execution of noncompliance's, voluntary disclosures, informal corrective actions, formal corrective actions, etc.
including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plansBasic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
5+ years of experience working directly with the FAA and/or ODA on Type Certification projects 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
Experience with project management and self-managing projects.
Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees Ability to accomplish goals on a self-directed basis Experience leading cross-functional teamsPreferred Qualifications (Desired Skills and Experience): Experience in presenting data to customers, suppliers, and program and site leaders.
Knowledge of software development and Digital Services product portfolio is preferred.
Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
Understanding of Safety Risk Management/Bowtie methodology.
Experience working across the certification value stream Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage Experience identifying web application impact due to changes in certification requirements Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts Experience developing presentations and presenting to multiple levels of an organization Experience investigating and finding solutions to complex technical or regulatory issues Experience recognizing and balance conflicting prioritiesDrug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range :Experienced (Level 3): $114,750
- $155,250Senior (Level 4) $141,100
- $190,900 Applications for this position will be accepted until Mar.
21, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is looking for an Experienced Product Lifecycle Process Engineer to support software installation and loading processes at our Everett, Washington location.Position Overview: Seeking an Experienced Product Lifecycle Process Engineer to support the installation and validation of loadable software on aircraft and in lab or production environments.
This role collaborates with Design Engineers and Production Engineers to ensure procedures meet hardware/software requirements and safety standards, and to deliver clear, repeatable loading procedures, robust troubleshooting, and up-to-date user guides.
The ideal candidate possesses hands-on Airplane Systems experience, strong technical writing skills, and a commitment to operational reliability .Primary Responsibilities: Install loadable software on aircraft platforms and bench test environments in accordance with approved procedures.
Develop clear, step-by-step loading procedures and instructions for both on-aircraft and bench scenarios.
Collaborate closely with Design Engineers for each system to ensure loading procedures align with hardware/software requirements and safety standards.
Validate and verify loading procedures through testing, design reviews, and field trials; capture results and implement improvements.
Maintain and update user guides, procedure documents, and training materials as software and hardware evolve.
Troubleshoot loading issues, document root causes, perform corrective actions, and verify effectiveness.
Ensure compatibility with regulatory, airline-specific safety, security, and reliability requirements.
Provide training materials or sessions for technicians and engineers as needed; lead or participate in hands-on training.
Maintain change control, versioning, and traceability for all loading procedures.
Contribute to risk assessments and safety analyses related to software loading activities.
Support incident investigations related to loading activities and implement preventive actions.
Ensure proper documentation and alignment software integrity practices where applicable.Work Authorization:This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at the Everett, WA location.Basic Qualifications (Required Skills/ Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.5+ years of relevant engineering experiencePreferred Qualifications (Desired Skills/Experience): Knowledge of software version control, builds, and software configuration management Familiarity with avionics test equipment, load devices, and data logging tools Experience writing and maintaining Engineering procedures and documents Understand product requirements relevant to certification, configuration, data and data management and engineering processes Knowledge of ARINC loadable software standards Knowledge of BCA software loading procedures Familiarity with aircraft system design and development Familiarity with aircraft networks and architectureConflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union:This is a union-represented position.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range :$107,100
- $144,900Applications for this position will be accepted until Mar.
28, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
