Engineering Structures Jobs in Suffolk Va Remote

• Routine blueprint reading and technical writing to accomplish work tasks.
• Daily use of tools such as micrometers, height gauges, Vernier calipers, and dividing heads to support tasking.
• Operate machine tools in varying tolerances according to need (from thousands upwards).
• Non routine maintenance and repair the portable machines tools.
• Routine use of hoisting and rigging equipment for heavy pieces such as forklifts and chain falls
• Responsible for system tolerance determination and application.
• Daily tasking will involve work on the following:
  • Rudders and Steering systems to include blue checking and fitting, piano wire alignment method, stock straightness determination, hydraulic and pneumatic controls.
  • Bearings and Bushings to include lubrication types and methods, piano wire fit and alignment method, dial indicator alignment.
  • Engines, Motors, and Generators: diesel engines, gas or steam turbines, generators, motors, reduction gears, clutches, PTO's, mount arrangements, systems flushing, heat exchanger (shell/tube and plate/frame), heat exchanger and systems leak testing.
  • Propulsion Shafting to include: CPP shafting, hydraulic couplings, clearance (water bearings), wear downs (oil bearings), Piano wire alignment method, dial indicator alignment, FRP spark test, bearing contact determination, shaft straightness (run out) determination.
  • Seals to include gaskets, packing, and \"O\"-rings, lips & labyrinth, mechanical, tightness testing.
  • Valve work: leak testing, seat types, packing/gasketing/lubrication, lapping, seat types (materials and types).
  • Propellers to include Keyed, Tapered, Flanged & Key fits- Solid and Built, CPP Systems, Polishing.
  • K. Pumps to include Valving (internal & external), Bearing & Sealing arrangements, Alignment (dial indicator & laser).
  • Deck machinery: gear boxes, bearings/seal arrangements, alignments, drivers (electric, mechanical, or hydraulic), sheaves, cables, turrets, booms
• Instruct lower classes of machinists, manage work/personnel assignments and the requisition of job materials.
• Upholding a safe work environment is key daily tasks require safe handling/use/storage of gasses; safe work practices; PPE; tank safe opening practices; lock-out/tag-out; confined space practices; respirator/harness fit; oil spill response.
  

• Must have a high school diploma or equivalent and at least seven (7) years of experience as a Machinist.
• Must have experience with manual lathes and mills.
• Must be able to read and comprehend blueprints, drawings and other technical trade related documents
• Must have adept mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per drawings, sketches, and verbal or written instructions.
• Must have clean driving record.
  

• Technical training preferred.
  

• Position requires you to gain and maintain access to government and military installations, often requiring completion of stringent background checks and screenings.
• May require the ability to obtain and maintain appropriate level of security clearance depending on the contract.
• Must be able to provide proper documentation as needed to process access/clearance (e.g. birth certificate, identification card, etc.).
  

• Frequent Travel; 50% or less.
• International travel required on a nonstandard routine.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• May ride ships at sea for extended periods
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
• Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.
  

• 
  
• Reports directly to the Production Manager. Once assigned, reports directly to the project Foreman in the performance of his/her responsibilities.
  
• Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
  
• Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
  
• Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.
  
• Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.
  
• Lays out material prior to performing machining operations to prevent possible errors.
  
• Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.
  
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
  
• Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.
  
• Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.
  
• Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
  
• Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.
  
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
  
• Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.
  
• Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.
  
• Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
  
• Expertly performs all tasks required as a Welder.
  
• Provides mentoring to junior craftsman.
  
• Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.
  
• Performs work outside of trade if necessary.
  

• 
  
• High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.
  
• 5 years' experience as a welder.
  
• Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.
  
• Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.
  
• Ability to obtain and maintain access to US Navy ships and government facilities.
  
• Ability to travel.
  
• Ability to communicate effectively, work independently or in a group.
  
• Ability to do basic math, i.e. add, subtract, divide and multiply.
  
• Ability to read, write, speak, and comprehend English.
  

• Ability to obtain and maintain a Secret security clearance.

Dermatologist

Bayview Physicians Group, one of Virginia’s largest independent, multi-specialty medical groups, is seeking a Board Eligible/Board Certified Dermatologist to join our thriving team in Suffolk, VA —one of the fastest-growing communities in the Hampton Roads region.

This is an outstanding opportunity to establish a busy, high-demand dermatology practice within a large, well-established medical center. The position comes with an existing patient base, strong referral network, and robust administrative support, allowing you to focus on delivering exceptional patient care from day one.

What we offer:

• Above market earning potential (competitive compensation structure)
• Performance incentives
• Flexible work/life balance
• Modern EMR platform – eClinicalWorks (eCW) office-based EMR shared with Bayview’s multi-specialties
• Full Benefits: Health, Dental, and Vision
• 401K Retirement
• CME allowance
• Paid time off
• Potential signing bonus
• Potential relocation allowance
• Malpractice and tail coverage

Responsibilities:

As a Dermatologist with Bayview Physicians Group, you will provide expert medical and surgical, dermatologic care to a diverse patient population:

• Perform comprehensive skin examinations and evaluate dermatologic conditions
• Diagnose and treat benign and malignant skin conditions
• Perform in office dermatologic procedures such as:
  • Skin biopsies
  • Cryotherapy
  • Electrosurgery
  • Excision of lesions and cysts
  • Intralesional injections
• Supervision of an APP

Please send your CV to