Engineering Structures Jobs in Shively Kentucky Remote
439 positions found — Page 3
Company Description
Founded in 1983, Squire Boone Village is a leading wholesale provider of candies, souvenirs, gifts, and jewelry. With innovative displays and custom-printed products, the company helps customers create unique, branded merchandise that sets their stores apart. Squire Boone Village's products can be found in thousands of locations worldwide. The company is inspired by the adventurous and pioneering spirit of its namesake, Squire Boone.
Role Description
This is a full-time on-site role for an Import Compliance & Product Safety Specialist based in New Albany, IN. The Import Compliance & Product Safety Speciailist/Manager is responsible for overseeing all import regulatory compliance, customs classification, and product safety testing requirements for the company. This role ensures full compliance with U.S. Customs and Border Protection (CBP) regulations, the Consumer Product Safety Improvement Act (CPSIA), the Consumer Product Safety Act (CPSA), applicable ASTM standards, and marketplace-specific requirements such as Amazon testing protocols.
This position will lead testing strategy, certification management, HTS classification, duty optimization, broker coordination, and audit readiness. The role is critical to protecting the company from shipment delays, penalties, recalls, and unnecessary duty expense.
Key Responsibilities
CPSIA / CPSA Product Safety Compliance
- Ensure compliance with CPSIA requirements for children’s products and other applicable CPSA-regulated product categories.
- Manage all required Children’s Product Certificates (CPCs) and General Certificates of Conformity (GCCs).
- Oversee required third-party laboratory testing and ensure testing certificates accompany each applicable import shipment.
- Maintain a system to track annual testing renewals and prevent certificate expirations.
- Develop testing strategies to group products into families where permissible to reduce testing costs.
- Ensure proper documentation retention to support audits, investigations, or product recalls.
- Maintain awareness of CPSC updates and regulatory changes.
ASTM & Product Development Integration
- Ensure testing aligns with applicable ASTM safety standards (including toy standards where applicable).
- Collaborate with Product Development and Engineering teams to ensure new products are designed to meet CPSIA, CPSA, and ASTM standards prior to production.
- Provide compliance guidance during product design to avoid costly redesigns or failed testing.
- Establish pre-production compliance review checkpoints.
Amazon & Marketplace Compliance
- Monitor and implement Amazon testing and documentation requirements.
- Ensure laboratory reports and compliance documentation meet Amazon’s most current protocols.
- Maintain organized compliance files to quickly respond to Amazon documentation requests.
- Monitor updates to marketplace compliance rules and proactively implement changes.
Import & Customs Compliance
- Determine and maintain accurate HTS tariff classifications.
- Optimize duty rates by ensuring proper classification and eligibility for trade programs.
- Validate country of origin determinations and customs valuation accuracy.
- Review commercial documentation for customs accuracy.
- Manage post-entry corrections, amendments, or prior disclosures if needed.
Broker & Freight Forwarder Management
- Serve as primary liaison with customs brokers and freight forwarders.
- Ensure required testing certificates and compliance documentation are submitted with each applicable import shipment.
- Provide clear filing instructions to brokers.
- Resolve customs clearance issues efficiently.
- Reduce reliance on outside consulting firms by maintaining internal compliance expertise.
Recordkeeping, Audits & Risk Management
- Maintain meticulous records in compliance with customs and CPSC recordkeeping requirements.
- Prepare documentation in the event of a CPSC audit or product recall.
- Conduct internal compliance reviews.
- Develop and maintain written compliance procedures.
Duty Management & Cost Optimization
- Gradually assume responsibility for customs duties management and tariff code strategy.
- Analyze duty spending and identify savings opportunities.
- Evaluate eligibility for duty mitigation programs.
- Ensure classifications are defensible and compliant while financially optimized.
Qualifications
Required:
- Bachelor’s degree in supply chain, International Trade, Regulatory Affairs, or related field (or equivalent experience).
- 5+ years of experience in import compliance, customs, or product regulatory compliance.
- Strong knowledge of:
- CPSIA & CPSA regulations
- CPSC testing and certification requirements
- ASTM safety standards (particularly for toys, if applicable)
- HTS tariff classification
- Experience managing third-party laboratory testing programs.
- Experience working with customs brokers and freight forwarders.
- Strong documentation management and audit readiness experience.
- Ability to interpret regulatory language and implement practical processes.
Preferred:
- Licensed Customs Broker (LCB)
- Certified Customs Specialist (CCS)
- Experience in children’s products, toys, or regulated consumer goods
- Experience with Amazon Seller Central compliance systems
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
PRINCIPALES REALISATIONS ATTENDUES
* Mettre en uvre et respecter le systeme de gestion environnementale.
* Participer aux activites obligatoires exigees par l'UB et le MMW.
* Respecter les exigences de securite.
* Assurer la qualite produite.
* Respecter le niveau de production.
* Respecter les instructions de verification du produit.
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.
Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
Are you ready to elevate your career? Michelin is looking for an outstanding Maintenance Technician (Experienced) - SRC to become part of our team in Louisville. This is an outstanding opportunity to join a company that prioritizes innovation, collaboration, and excellence.
What You Will Do- Mentor troubleshooters and maintainers in scheduled work, ensuring the application of maintenance methods and promoting the use of Bibsolv +.
- Ensure all job practices are performed in compliance with safety, environmental protection, and quality standards, maintaining traceability and documentation in BMA.
- Optimize resources used during interventions, ensuring the use of spare parts is efficient and that equipment maintains sustained energy performance.
- Avoid equipment failures and guarantee the availability of spare parts, completing repairs within an optimized timeframe.
- Collaborate with the Reliability team and RSTEC to effectively schedule planned interventions, applying Maintenance Plans.
- Improve TRS-P by analyzing and proposing improvements, ensuring the frequency and duration of maintenance activities meet quality standards.
- Support MDP processes by analyzing events from the previous day and addressing requirements from briefings.
- Control the impact of equipment evolution by analyzing potential consequences on reliability, quality, and maintenance efficiency.
- A Two-Year degree (experience will be considered in lieu of degree); a Bachelor's Degree or equivalent experience is preferred.
- Experience in a Union Environment.
- Outstanding interpersonal abilities, enabling professional interaction with external partners, suppliers, customers, and colleagues across all organizational tiers.
- Strong teamwork, leadership, and organizational skills.
- Effective problem-solving, critical thinking, and process/product relationship knowledge.
- Strong command of Microsoft Office Suite and the capacity to quickly learn internal software systems.
Why Michelin?
At Michelin, we believe in fostering an encouraging and inclusive environment where every team member can thrive. Join us and be part of a world-class team dedicated to achieving excellence. We offer competitive compensation, professional development opportunities, and a chance to create a significant impact!
#LI-EO2
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
- Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
- Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
- Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
- Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
ASRC Electrical Troubleshooter Responsibilties:
-Safely maintain plant electrical power distribution including transformers, switch gears, panels and associated wiring. Troubleshoot and repair all plant electrical systems
such as balers, robots, conveyors, etc.
-Must be able to troubleshoot and repair components such as motors, starters, PLCs, etc.
-Compliance to all safety requirements is a must, such as LOTO and PPE equipment
- Effectiveness of all interventions (prevent breakdowns, cure the default within an optimized time, solutions to deal with recurring defects / problems...)
- Efficiency of all interventions (resources used, consumption of spare parts)
- Documented interventions and quality of the encoding
- Maintenance plans carried out and compliant (transformers, protective devices, substation visits, thermographic analyzes, ...)
Required Qualifications:
- Must be 18 years of age
- Applicant must have a High School Diploma/GED or equivalent
And one or more of the following:
- 2-3 years' experience in a relevant maintenance position
- Associates degree relevant to the open maintenance position
- Journeyman's card relevant to the open position
- Military Background with technical training relevant to the open position
- Must pass entry level skills assessment in the craft relevant to the open position
- Must be able to pass a Company physical including a hair drug screen
Job Salary and Benefits:
- Level 1 pay $39.70 Level 2 pay $41.27 after 120 days provided you are a
- journeyman in your trade. Also $1.25 adder for shift pay.
- Plus a $1500.00 sign on bonus.
- Plus A $2500.00 retention bonus after employment of 1 year.
And all Personal Protective Equipment (PPE)
- Overtime is available
- Paid Holidays, Vacation and Medical Leave
- Ability to join our Emergency Response Team w/Firefighter Credentials
- Deferred Compensation Retirement and 401K Plans
- Company Paid Medical, Rx Drug, Dental and Life Insurance
- Voluntary Vision Plans and Supplemental Life Insurance Offered
- Other benefits - Tools, Uniforms, Safety Shoe allowance, Rx Safety Glasses
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
- Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
- Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
- Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
- Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
Build a Career That Matters with One of the World's Most Respected Employers!
- - - - - - - - - - - -
On road service technician
Ready to Shape the Future of Innovation?
Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.
The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.
Why Michelin?
Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.
Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.
Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .
This position is not available for immigration sponsorship.
We build the future with people like you. Begin your career with Michelin today!
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
