Engineering Structures Jobs in Rio Del Mar, CA

• 
  
• You will perform reviews of documents associated with completed work and trade processes.
  
• You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
  
• You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
  
• You will serve as an Expert Welder leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination.
  
• This position requires the ability to lift and carry items weighing 50 pounds.
  
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
  
• Must maintain visual inspection qualifications per VT-271.
  

• 
  
• Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget
  
• Follow written work instructions
  
• Work under minimal supervision on duties and tasks that are frequently non-routine, adapting procedures, techniques, tools, materials and/or equipment to meet special needs
  
• May perform more detailed tasks requiring deeper knowledge and experience in the specified processes and procedures
  
• Rely on experience and judgment to plan and accomplish assigned goals
  
• Able to effectively communicate with other functional departments, such as Engineering, Purchasing, Manufacturing, Engineering, Quality, and Sales departments
  
• Resolve most questions and problems, referring only the most complex issues to higher levels
  
• Serve as a resource to others in the resolution of complex problems and issues
  
• Be a self-starter and demonstrate good decision making ability
  
• Must maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS)
  
• Proper use of required PPE
  
• May periodically assist in orienting and training lower level employees
  
• May participate in LEAN Events, \"Six S\" activities, action teams etc.
  
• Support, communicate, reinforce and defend the mission, values and culture of the organization
  
• Perform advanced-level assembly functions, which may include: prep, mechanical, harness, cable, printed circuit board sub-assemblies, spray application, and inspection, typically working from models and/or drawings, within Production
  
• May perform soldering and installation of components to contract specifications, using a wide range of tools and equipment
  
• Interpret blueprints, Process Flow Instructions and other written or verbal instructions
  
• Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule, within budget and to SPC standard practices
  
• Must be trained across all assembly stages, work w/Engineering to build 1st articles by interpreting print/specification with no process provided and the ability to interpret/assemble all units in dept
  
• If required, perform all aspects of inspection: in-process, final and source; allocate partial points - 3 points in-process - 3 points final - 4 points source
  

• 
  
• Cleanroom experience
  
• Solder Certification (J-STD-001)
  

• High school diploma or GED with a minimum of 5 years of experience in specialty area e.g. welding, tool making
  

Company Description

Soil Retention Products, Inc. a Southern California based company, manufactures and distributes a line of Plantable concrete systems®, including the Verdura® retaining wall system; Drivable Grass®, a permeable, flexible and plantable paving system; and Enviroflex®, a plantable interlocking ACB revetment system.

Soil Retention Systems, Inc. is a recognized General Engineering Contractor with licenses in California, Nevada, and Arizona. The company has successfully installed over 15 million square feet of retaining wall systems with an impeccable track record of zero failures. Known for its industry-leading production rates of up to 2,500 square feet per day, Soil Retention Systems delivers fast, efficient, and high-quality installation services. Highly trained crew members, proven Verdura® wall system, and state-of-the-art equipment are integral to maintaining this standard of excellence.

Role Description

This is a full-time role for a Sales Engineer, based in Carlsbad, CA. The Sales Engineer will focus on providing presentations, attending industry events, estimating, project management, technical support during the sales process, building strong client relationships, and effectively communicating technical details to both technical and non-technical stakeholders. The individual will collaborate with internal teams to ensure tailored solutions meet client needs and contribute to overall business growth.

Qualifications

• Enjoy sales and networking
• 2+ years experience in plan preparation. Civil engineering land development preferred
• Bachelor's degree in Civil Engineering or related field preferred. PE a plus.
• Strong Communication, both written and verbal, to conduct presentations, convey technical details effectively and build client relationships

Company Description

IDE Technologies is a global leader in water treatment solutions, specializing in the development, engineering, construction, and operation of advanced desalination, water reuse, and industrial water treatment plants. Our mission is to deliver sustainable, resilient, and high-quality water infrastructure while protecting public health and the environment. IDE Americas serves clients across the United States, including some of the largest seawater desalination facilities in operation.

Position Summary

The Director of Regulatory Compliance (DORC) serves as IDE Americas’ senior environmental, occupational health, and safety executive, accountable for establishing and overseeing comprehensive EHS programs across all phases of company operations including project bidding, design, construction, commissioning, and long-term O&M. The DORC provides executive-level leadership and direction for environmental permitting, regulatory compliance, workplace safety, emergency preparedness, and environmental stewardship across all IDE Americas facilities and pilot projects in the continental U.S.

This position serves as the primary Legally Responsible Person (LRP) for environmental and occupational health and safety matters, representing IDE before federal, state, and local regulatory agencies, and ensuring company-wide compliance with all applicable environmental laws, permits, safety standards, and operational agreements. The DORC also acts as a key stakeholder and representative in industry forums, government-led regulatory development processes, and enforcement actions (e.g., NOVs, consent orders, hearings, abatement negotiations).

Core Responsibilities

Environmental Compliance and Regulatory Engagement

• Serve as the designated Legally Responsible Person (LRP) representing IDE Americas before federal, state, and local agencies on matters related to environmental permitting, enforcement, and regulatory oversight.
• Lead all environmental regulatory strategies, including permitting, negotiation of permit conditions, regulatory response, and policy interpretation across all IDE Americas facilities and projects.
• Oversee multi-jurisdictional environmental compliance programs in coordination with agencies such as the State and Regional Water Quality Control Boards (SWRCB/RWQCB), California Environmental Protection Agency (CalEPA), U.S. Environmental Protection Agency (EPA), U.S. Army Corps of Engineers, U.S. Coast Guard, California Coastal Commission, CUPAs, APCDs, and other federal, state, and local entities.
• Direct preparation and timely submission of required regulatory reports and data, including NPDES Discharge Monitoring Reports (DMRs), CIWQS uploads, CDP filings, CERS entries, eGGRT, EPCRA Tier II, TRI, and SWMP Annual Reports.

Executive EHS Program Leadership

• Provide strategic leadership for the development, implementation, and ongoing improvement of IDE’s integrated Environmental, Health, and Safety (EHS) program, encompassing permitting, reporting, risk mitigation, and compliance assurance.
• Establish company-wide EHS policies and performance metrics in alignment with corporate values, client expectations, and evolving regulatory requirements.
• Regularly interface with IDE Technologies (Israel) to coordinate international compliance alignment, support project oversight, and deliver quarterly EHS performance presentations to IDE Technologies’ Board of Directors.

Operational Risk Management and Site Leadership

• Actively lead field-based audits, inspections, and O&M activity reviews at project sites throughout North America, with a focus on identifying and mitigating environmental and occupational risks.
• Serve as IDE’s Project Environmental Coordinator (PEC) for shoreline and offshore infrastructure work, including coordination of marine operations such as intake pump servicing, crane-supported offshore deployment/recovery, diver-assisted inspections, and emergency response activities.
• Direct on-site regulatory walkthroughs, contractor coordination, and compliance readiness activities during construction, commissioning, and operational phases of each project.

Occupational Health and Safety Oversight

• Oversee all aspects of IDE Americas’ occupational health and safety programs, ensuring compliance with State and Federal OSHA, and facility-specific health and safety standards
• Supervise the Occupational Health & Safety Officer and guide the implementation of key safety programs including confined space entry, LOTO, respiratory protection, hazard communication, industrial hygiene, and injury/illness prevention.
• Lead internal investigations into safety incidents, near misses, and hazardous conditions, and coordinate regulatory notifications, root cause analyses, and corrective action planning.

Organizational Development and Reporting

• Recruit and retain a high-performing EHS team and cultivate a culture of excellence, accountability, and proactive risk management across all departments.
• Develop and administer the annual EHS departmental budget, including line-item forecasts for environmental monitoring, regulatory consulting, capital safety improvements, training initiatives, and environmental settlements.

Knowledge Skills and Abilities (KSAs)

• Strategic Regulatory Leadership: Demonstrated ability to lead, manage, and improve regulatory compliance and EHS programs across large, multi-facility operations with complex permitting, legal, and operational components. Must be capable of representing IDE as the Legally Responsible Person (LRP) in regulatory negotiations, permit proceedings, and hearings with federal, state, and local agencies.
• Environmental and Occupational Health Proficiency: In-depth understanding of environmental permitting and reporting under NPDES, CIWQS, CDPs, and other federal/state programs, as well as direct oversight experience of occupational safety programs governed by OSHA and Cal/OSHA. Strong working knowledge of field-based risk management, industrial hygiene, confined space programs, and marine/offshore compliance.
• Agency and Stakeholder Engagement: Proven ability to build and maintain effective relationships with regulatory bodies (e.g., SWRCB, RWQCB, EPA, CalEPA, CUPAs, APCDs, USCG, Army Corps), city governments, NGOs, clients, and third-party contractors. Able to navigate complex regulatory landscapes and serve on multi-agency technical advisory groups or steering committees.
• Communication and Representation: Exceptional written and verbal communication skills, with experience preparing regulatory submittals, enforcement responses, internal reports, and board-level presentations. Must be capable of delivering strategic updates to IDE Technologies (Israel), including quarterly EHS KPI presentations to the Board of Directors.

Minimum Requirements

• Education: Bachelor’s degree in environmental engineering, Environmental Science, Business Management, or a closely related technical discipline. Equivalent combinations of education and directly relevant experience (e.g., Associate’s degree plus 10 additional years of progressively responsible environmental permitting and regulatory compliance experience) may be considered.
• Experience: Minimum of 10 years of direct experience managing environmental permitting, regulatory compliance, and reporting responsibilities as the designated Legally Responsible Person (LRP) or equivalent, within utility, industrial process, or large-scale water/wastewater treatment environments. At least 5 of those years must be in a senior or executive leadership capacity with oversight responsibilities across multiple jurisdictions or sites.
• Regulatory Expertise: Deep working knowledge of the National Pollutant Discharge Elimination System (NPDES), California Ocean Plan, and brine/ocean discharge permit frameworks, with hands-on experience navigating marine and coastal environmental regulations, source water protection, and the regulatory landscape governing seawater desalination and potable water production.
• Multi-Jurisdictional Oversight: Demonstrated ability to manage compliance obligations across multi-site and multi-state operations involving strict adherence to local, state, and federal environmental statutes—including permitting, inspections, and regulatory reporting across all lifecycle phases (design, construction, commissioning, and operations).
• Technical Proficiency: Strong applied understanding of water quality laboratory analysis, AWWA Standard Methods, and the ability to interpret and extrapolate water quality data to support regulatory compliance and facility operations.
• Communication & Analysis: Exceptional technical writing skills, environmental data analytics capability, and the ability to translate compliance data into operational and risk-reduction insights for executive decision-makers.

The salary listed is dependent upon qualifications and experience and may be higher or lower than what is listed.

• Ensure work is done safely and meets quality standards.
• Must have own basic skill related tools and equipment if not supplied by the workplace.
• Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames.
• Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools.
• Locate and mark reference lines, such as center, buttock, and frame lines.
• Position parts in hull of ship.
• Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
• Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding.
• Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
• May prepare molds and templates for fabrication of nonstandard parts.
• May tack weld clips and brackets in place prior to permanent welding.
• May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines.
• Ensure work is done safely and meets quality standards.
• Assemble items as instructed by floor supervisor.
• Keep work areas clean and organized and take proper care of all equipment and facilities.
• Follow all company rules and policies.
• Provide a great level of attention to detail and focus on the given task.
• Work with team members to maximize productivity and efficiency.
• Prepare product for shipment.
• Report any unsafe work conditions or practice to supervisor.
• Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
  

• None
  

• Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
• Familiarity with the metric system
• Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
• Ability to stand continuously for long periods of time.
• Ability to identify and measure material.
• Ability to follow instructions given both verbally and in written form.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic.
• Knowledge of machines and tools, including their designs and uses.
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
  

• High school graduate, or GED preferred.
• Six months to one-year related experience and/or training
• Experience with steel, aluminum and/or stainless steel required.
  

• Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime.
• Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions.
• Work over extended periods of time in tightly configured confined spaces.
• Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
  

• Measuring tapes, rulers, squares, levels, chalk lines, saws, shears, plasma cutters, oxy-fuel torches, angle grinders, welding machines, welding torches, electrodes, welding masks, cranes, hoists, chains, slings, come-alongs, hammers, screwdrivers, wrenches, pliers, vise grips, clamps, files, deburring tools, drills, grinders, sanders, impact wrenches, reciprocating saws, air hammers (pneumatic), riveters (pneumatic), forklifts, pallet jacks, trolleys, and other tools. Items listed are a representative sample but not an all-inclusive list.
  

• May be made to enable qualified individuals with disabilities to perform essential job functions.
  

Company Description

Cannon Building, a leading general contractor specializing in life science, healthcare, commercial/institutional, and industrial sectors, is seeking an experienced Superintendent to oversee and drive the successful delivery of healthcare construction projects in the San Diego area.

As a Superintendent at Cannon Building, your primary focus will be the Cannon Building’s Safety Plan at the jobsite. Work with the Project Manager to develop a project schedule. Monitor with and assist the Project Manager in the execution of the project financial goals. Provide quality control by studying drawings, questioning uncertain details, continuously walking the job and inspecting each trades work and compare it to the contract documents. Be a problem solver prior to the work taking place and ensure that the work meets or exceeds the requirements of the contract documents.

Role Description

This is a full-time, on-site role for a Construction Superintendent – Life Science at Cannon Building. Based in Carlsbad, CA, the Construction Superintendent will oversee daily on-site operations of construction projects, ensuring they are executed on time, within budget, and meet quality and safety standards. Responsibilities include managing crews and subcontractors, ensuring compliance with safety protocols, preparing and following project schedules, and coordinating resources and materials to optimize efficiency. The role requires collaboration with project management teams and maintaining clear communication with stakeholders.

Responsibilities:

Project Planning and Coordination:

•  Monitor and document all SWPPP, BMP and storm related paperwork related to the project including job surveys and updating of the SWPPP plans and keeping all files up to date.

Leadership and Communication:

•  Provide leadership by using effective verbal and written communications to manage the subcontractors and field personnel as well as interact with the Owner, Architect and Consultants on behalf of the company.
• Organize and lead project meetings, prepare minutes, and ensure all parties understand and fulfill their obligations.

 Contract and Compliance Management:

• Ensure compliance with general conditions and contract requirements, monitoring contract documents for conformance and execution.
• Negotiate subcontract and purchase order terms, oversee subcontract execution, and manage subcontractor claims.

 Project Documentation and Systems:

• Utilize Procore to manage project documentation and costs, overseeing the preparation and reporting of RFIs, submittals, inspections, safety reports, change orders, and related documents.
• Confirm all contracts are signed and insurance is in place prior to allowing any personnel on the jobsite to perform any work. Reads and has a working knowledge of subcontracts and change orders. Review weekly project logs for insurance, RFIs, Submittals, and Material Delivery Logs to ensure the proper delivery of materials, equipment and labor to the project.
• Review shop drawings along with Project Manager to help ensure compliance with the construction documents.

Quality and Safety Assurance:

• Participate in Operations and Safety meetings, promoting and enforcing jobsite safety.
• Start up the project assessing safety requirements and site logistics. Schedule and document safety start up meetings with the subcontractors reviewing Cannon Building’s safety requirements, OSHA requirements, Site Specific Safety requirements and reporting requirements.
• Monitor work quality and perform regular inspections to ensure construction standards are consistently met.
• Enforce strong safety culture, conducting regular safety meetings, inspections, and ensuring compliance with OSHA and other safety regulations.

Travel Requirements:

•  Travel may be required; the position is based out of the San Diego region, with travel for projects as needed in Orange, Los Angeles, or San Diego counties.

Qualification and Requirements

Experience Requirement: Demonstrates a working knowledge of commercial construction with a minimum of five years of experience in this area with a focus on Life Science and Pharmaceutical

· Education/Training: Bachelor’s degree in construction management, Civil Engineering, or a related field preferred. Additional certifications in OSHPD/HCAI regulations and construction safety are a plus

· Experience as Lead Superintendent for Life Science/Pharmaceutical projects

Project Experience: Project experience valued at $2 Million or greater as a Superintendent.

• Minimum of 5 previous project experience managing Life Science/ Pharmaceutical

Excellent Written and Communication Skills: Candidates must possess excellent written and verbal communication skills, enabling effective interaction with clients, stakeholders, team members, and other project participants. Strong presentation and negotiation skills are essential to manage client expectations and influence project outcomes.

Technical Expertise: In-depth understanding of construction techniques, including reinforced concrete, wood framing methods, and engineering details, as well as electrical, mechanical, and plumbing systems.

Technical Proficiency: Proficient computer skills in Microsoft Office Suite, project management software

(Procore or similar), scheduling software (MS Project or similar), PDF management (Bluebeam), and BIM software (AutoCAD, Revit, Navisworks, or similar).

Strategic and Analytical Thinking: Ability to think strategically and make informed decisions, including analyzing project requirements, assessing risks, and developing effective strategies to meet project goals. Proactive approach to problem-solving.

Financial Management: Advanced skills in budgeting, financial management, and cost control, including developing and monitoring project budgets, tracking expenses, and ensuring financial objectives are met. Experience in managing project contracts and subcontractors.

Risk Management: Deep understanding of risk management principles and techniques, including identifying potential risks, developing risk management strategies, and implementing mitigation plans to minimize project disruptions.

 Quality Assurance: Strong focus on quality control and assurance, ensuring compliance with relevant codes, standards, and specifications. Experience in conducting quality audits and implementing quality control measures.

Client Management: Maintains good working relationships with City Officials and Inspectors. Schedules all City Inspections in advance to ensure schedule commitments are met.

Who We Are:

Cannon Building is a leading Life Science, Commercial/Institutional, Healthcare, and Industrial builder, providing highly efficient, cost-effective construction solutions with a commitment to safety and an uncompromising standard of quality. Cannon Building is proud to be a family-owned business, celebrating its 30th year in operation. We empower our employees to take the lead in achieving their own, unique goals. Our company culture is one of teamwork, inclusiveness, growth, leadership and creativity.

We respect and rely on one another for exceptional results. We promote an environment of collaboration, enjoy working together, and celebrate the success of our clients, knowing that customer success is the basis for our long-term success. To learn more about our work culture, visit our Company Website.

Our Mission: To develop long-term working relationships by providing premier commercial construction services.

Our Vision: To efficiently deliver quality projects with the highest level of customer satisfaction.

Our Values: We are professional, ethical, innovative, and accountable.

Seeking a flexible, detailed oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. Proven expertise in healthcare with a strong network of industry contacts. Experience in Life Sciences, Construction, or similar fields is beneficial.

Compensation:

Salary: $120k to $160k DOE

Offers a competitive compensation package that includes a 401(k) plan with match: employee group dental, vision, life, and disability. Medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; paid holidays, vacation, and sick time; FSA

Work with the Director of Merchandising on the planning, development, and execution of

an organization's merchandise strategy. This role involves analyzing market trends, and making data-driven decisions to optimize product assortment, pricing, and inventory levels. The goal is to maximize sales and profitability while ensuring that the merchandise aligns with the company's brand and customer expectations.

The strategic link between the product team and our cross functional partners in marketing, planning and sales.

Assortment Planning:

• Participate in merchandising strategies and creation of seasonal assortment plans to build profitable assortments that will meet internal margin goals
• Partner with Director of Merchandising on seasonal style line plan creation and maintenance including but not limited to style number creation, color codes, and product variable data coding for PLM system
• Set and adjust pricing strategies to optimize sales and
• profitability, taking into account competitive pricing, cost structures, and market dynamics.

Business Reporting & Analysis:

• Assist in monitoring weekly sales, analyzing style performance and market trends to better understand channel specific needs and opportunities
• Learn to understand target customers by shopping retail stores and providing competitive analysis to enhance brand strategies and opportunities
• Assist in the development of inventory and markdown strategies that fuel company sales objectives

M&D Calendar:

• Assist the Director of Merchandising in maintaining the design calendar and development process to ensure timely completion
• Participate in development Milestone Meeting preparation, including sketch reviews, line assortment reviews, proto reviews, pricing and margin reviews, and internal sales presentations

GTM Calendar:

• Work with Director of Merchandising to set seasonal primary and secondary product marketing stories
• Develop Briefs for Creative Production
• Complete Channel Boxes in GTM Calendar

Sample Management

• Work closely with production to manage incoming photo samples
• Organize, maintain, and prepare samples for merchant presentations and requests from
• business partners
• Manage and organize the sample archive

Wholesale and E-Commerce Asset Creation

• Collaborate with the creative team on product descriptions
• Create shot list for seasonal photo assets and work closely with in-house photographer to
• ensure completion
• Work with Director of Merchandising on styling of both mens and womens collections, and
• assist on photoshoots
• Review photo assets and ensure they meet Outerknown standards

ESSENTIAL SKILLS & QUALIFICATIONS:

• Bachelor’s Degree or equivalent experience in design, business, or marketing
• Apparel merchandising/buying background required; contemporary menswear experience
• a plus, planning experience a plus
• An understanding of the Outerknown brand and mission and how they translate to the
• collections at the e-commerce level
• Demonstrated ability to set initiatives and deliver results while maintaining a positive
• attitude
• Self-motivated and organized with a strong work ethic and ability to excel in a team
• environment

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Description

General program information and/or position overview.

Leidos is seeking a skilled and detail-oriented Electronics Technician to contribute to cutting-edge engineering efforts within our Undersea Systems Division (USD). This role is a unique opportunity to drive innovation in underwater vehicle systems, maritime sensors, subsea telemetry, and ISR solutions that support critical defense and national security missions at Naval Information Warfare Center, Pacific (NIWC PAC).

Leidos’ USD is a recognized leader in C4ISR technologies, delivering innovative, mission-critical solutions across sensor networks, unmanned systems, and tactical platforms. We’re known for achieving “industry firsts” in the most challenging maritime domains.

The selected candidate will be part of an elite, top-notch group responsible for the development, manufacture, and testing of electro-mechanical devices for use with Unmanned Vehicles and other undersea systems and maritime mission applications. This individual will work closely with the government engineering team through all project phases. The ideal candidate will perform assembly, installation, testing, and evaluation of precision underwater products as directed by engineering and lead integration personnel. They will also be able to read, interpret, and work with engineering schematics and drawing markups to produce mission-ready equipment.   Tasking may include soldering, circuit board repairs, wire harness construction, mechanical assembly, boat operations/installations, bench testing, cable construction, fiber-optic systems, high-power systems, communication networks, and molding & encapsulation. Handling highly delicate scientific instruments is required. Travel for test events and installations may be required.     

Join us and be part of a world-class team delivering unmatched solutions for today's most pressing maritime missions. 

This position will require the candidate to hold a Secret Clearance.

This position will require the candidate to work a 9/80B schedule (80 hours of work into nine days over a two-week period, allowing for every other Friday off) to align with the NIWC government team.

• Primary Responsibilities.
• Assemble, test, and troubleshoot small, printed circuit boards, adhering to soldering quality standards such as IPC-A-610 or equivalent
• Perform precision silicon molding for components that meet high-performance standards
• Conduct cable terminations with accuracy, ensuring long-term reliability
• Build and test wiring harnesses
• Assemble mechanical hardware (from small board-level items all the way up to large infrastructure-type assemblies)
• Able to troubleshoot and correct electrical and mechanical issues
• Perform in-lab testing
• Manage logistics to include shipping, receiving, and material control
• Stock, pack, and load trailers/containers for out-of-area testing
• Verify system functionality using advanced electronic testing tools, such as soldering stations, multimeters, oscilloscopes, and environmental simulators
• Collaborate with engineers and team members to improve production processes and address technical challenges
• Maintain detailed documentation of work performed and adhere to safety and quality standards
• Apply innovative problem-solving techniques to resolve technical challenges in high-stakes environments
• Requires frequent movement around piers, docks, and facility spaces
• Required to transport or lift objects weighing up to 50 pounds across the facility
• Requires constant use of hands/fingers to operate machinery, tools, or computer equipment
• Requires ability to move about the warehouse, stoop, kneel, or reach for extended periods
• Ability to climb ladders up to 20 ft
• Able and willing to work aboard marine vessels of various sizes, sometimes overnight
• Requires work in various temperatures and inclement weather
• Required work in /or in loud production environments

• Basic Qualifications.
• High school diploma or equivalent; associate degree or certification in electronics or a related field preferred.
• Proficiency in cable and wire termination methods for both wet and dry applications, including various connectors.
• Proficiency in both Through-Hole and Surface-Mount Technologies and assembly practices, with adherence to established standards.
• Ability to assemble printed circuit boards with components as small as 0201 under a microscope.
• Strong skills in using tools such as soldering irons, multimeters, and oscilloscopes.
• Attention to detail and problem-solving capabilities in working with precise electronic components.
• Ability to interpret technical drawings and schematics.
• Excellent communication and teamwork abilities.
• Proven ability to solve problems creatively and effectively, even with constrained resources or incomplete information.
• Must be flexible and responsive to customer needs.
• Must be well-organized and detail-oriented.
• Ability to work on several projects concurrently.
• Familiarity with hand and power tools such as electric drills, saws, landscaping tools, etc.
• US Citizenship.
• Must be able to receive a DoD Secret security clearance if not already active.

• Preferred Qualifications.
• Knowledge of industry standards and quality assurance practices for electronic systems.
• Experience in a manufacturing or laboratory environment, particularly with high-performance systems.
• Familiarity with advanced troubleshooting techniques for small electronic components.

SUBSEAMSS

If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.

For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

About Leidos

Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit and Benefits

Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at Your Data

Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at

If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission.

Commitment to Non-Discrimination

All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.