Engineering Structures Jobs in Richardson Tx Remote
539 positions found — Page 8
Electronics Repair Specialist (RICHARDSON)
Salary not disclosed
JOB SUMMARY
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
temporary
SMT Equipment Maintenance Specialist (Evening Shift) (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets.
Job Responsibilities
- Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
- Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
- Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
- Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
- Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
- Document all maintenance activities, repairs, and process changes accurately and thoroughly.
- Participate in root cause analysis for production defects and implement effective solutions.
- Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
- Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
- Flexibility to work night shifts, including weekends and holidays as required.
Job Qualifications
- Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
- Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
- Strong understanding of SMT processes, equipment operation, and common defects.
- Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
- Ability to read and interpret schematics, technical drawings, and equipment manuals.
- Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
- Familiarity with IPC standards and quality control principles.
- Excellent problem-solving skills and attention to detail.
- Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
- Proficient in using standard hand tools, diagnostic equipment, and computers.
- Ability to lift up to 35 lbs and stand for extended periods.
The SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets.
Job Responsibilities
- Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
- Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
- Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
- Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
- Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
- Document all maintenance activities, repairs, and process changes accurately and thoroughly.
- Participate in root cause analysis for production defects and implement effective solutions.
- Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
- Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
- Flexibility to work night shifts, including weekends and holidays as required.
Job Qualifications
- Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
- Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
- Strong understanding of SMT processes, equipment operation, and common defects.
- Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
- Ability to read and interpret schematics, technical drawings, and equipment manuals.
- Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
- Familiarity with IPC standards and quality control principles.
- Excellent problem-solving skills and attention to detail.
- Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
- Proficient in using standard hand tools, diagnostic equipment, and computers.
- Ability to lift up to 35 lbs and stand for extended periods.
temporary
SMT Process Technician (6am-2:30pm Weekdays) (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.
Job Responsibilities
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.
Job Responsibilities
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
temporary
Diagnostic Technician II (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
temporary
Circuit Board Testing Technician (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
temporary
Sr. Principal Electrical Integration Engineer - Data Center (Remote) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Sr. Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
temporary
Senior Electrical Design Expert - Remote Data Center Integration (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Sr. Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
temporary
Sr. Principal Electrical Integration Engineer - Data Center (Remote) - Includes global project travel opportunities (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Sr. Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design:
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration:
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation:
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture:
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation:
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience:
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
temporary
Sr. Principal Electrical Integration Engineer - Data Center (Remote)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Sr. Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization : Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
Jabil has an exciting opportunity for a highly experienced and technically proficient Principal Electrical Engineer to engage in the design, fabrication, and integration of electrical systems for data center power and cooling products, as well as factory enablement projects. This role includes full-stack electrical design from generator systems to AI rack integration zones, with a focus on PDUs, UPS systems, MV/HV power distribution, phased power infrastructure, and controls architecture. The ideal candidate will bring deep technical expertise and a passion for delivering scalable, reliable, and compliant infrastructure solutions.
The Sr. Principal Electrical Integration Engineer will manage and oversee the electrical systems essential for the data center, energy storage systems, and HVAC applications. This role will involve developing specifications, selecting key components, routing wires and cables, establishing connections, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
Product & System Design :
- Knowledge of high-efficiency power conversion and point-of-load regulation for AI/ML server racks (BBU, rPDU).
- Understanding of rack power zoning, load balancing, and redundancy strategies for tiered compute workloads.
- Ensure electrical systems are properly integrated into fabricated enclosures and structural assemblies.
- Lead the electrical design and integration of UPS systems, power conversion units, and safety interlocks.
- Develop and maintain single-line and three-line diagrams for power distribution systems, ensuring clarity, accuracy, and compliance with NEC, IEEE, and UL standards.
- Design and validate three-phase power systems, including load balancing, fault protection, and redundancy strategies for high-availability environments.
- Engineer and integrate medium-voltage (MV) and high-voltage (HV) power distribution components such as switchgear, transformers, busways, and protective relays.
- Specify and qualify electrical components including circuit breakers, contactors, CTs/PTs, surge protection devices, isolation switches for MV/HV applications and the design and development of wiring harnesses
Factory & Facility Integration :
- Design end-to-end electrical distribution systems from generator and utility interface to AI rack integration zones.
- Coordinate with cross functional teams to ensure electrical infrastructure aligns with facility layout, safety codes, and operational requirements.
- Plan and implement power redundancy, load segmentation, and scalable distribution architectures to support high-density compute environments.
- Ensure proper grounding, EMI shielding, and thermal management across all facility-level electrical systems.
Fabrication & Implementation :
- Define fabrication processes including panel building, cable routing, and system integration, ensuring manufacturability and serviceability.
- Perform electrical load calculations, short-circuit analysis, arc flash studies, and thermal modeling using tools such as ETAP, SKM PowerTools, or EasyPower.
- Lead design reviews, risk assessments, and validation testing to ensure compliance with UL, IEC, NEC, CE, RoHS, and REACH standards.
- Interface with suppliers and customers resolve fabrication and quality issues, and ensure adherence to specifications.
- Support prototype builds, field deployments, and customer engagements to gather feedback and refine designs.
Controls Architecture :
- Develop and implement electrical controls architecture for power and cooling systems, including PLCs, SCADA integration, and remote monitoring capabilities.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Collaborate with software and automation teams to ensure seamless integration of control systems with facility and product-level infrastructure.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
Leadership & Documentation :
- Develop and maintain engineering documentation including BOMs, test procedures, and engineering change orders (ECOs).
- Mentor junior engineers and provide technical leadership across cross-functional teams.
- Drive continuous improvement initiatives focused on cost reduction, design for manufacturability (DFM), and product scalability
How will you get here?
Education :
- Bachelor’s Degree in Electrical Engineering or related engineering discipline.
Experience :
- 10+ years of experience in electrical design and fabrication, with a focus on data center or industrial power systems
- Proficiency in ECAD tools (AutoCAD Electrical, EPLAN, SolidWorks Electrical) and integration with mechanical CAD platforms
- Strong understanding of MV/HV power distribution, lithium-ion UPS systems, and three-phase electrical infrastructure
- Experience with electrical analysis tools (ETAP, SKM PowerTools, EasyPower)
- Proven experience in facility-level electrical design and construction support and Excellent leadership, communication, and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
Preferred Qualifications:
- Master’s Degree in Electrical Engineering
- Active Professional Engineer (PE) license
- Experience with data center infrastructure: UPS systems, switchgear, CRAC units, and PDUs
- Familiarity with global compliance standards: UL, CE, RoHS, REACH, and IEEE.
- Hands-on experience with panel fabrication, wiring, and system integration
- Knowledge of thermal and mechanical constraints in electrical enclosure design and experience working with global suppliers and contract manufacturers
- Experience in WindChill and DevOps
Remote working/work at home options are available for this role.
permanent
Engineer, Compute Systems - IT Infrastructure - Full Time (Hybrid)
🏢 Guthrie
Salary not disclosed
Job Description
Position is hybrid with requirement to travel to Sayre, PA at least once a month.
Summary:
The Engineer, Compute System Engineering is responsible for the implementation and support of compute based infrastructure, including public, private and hybrid cloud deployment models to support critical healthcare operations across The Guthrie Clinic (TGC). This role ensures high availability and performance for clinical systems, patient care services, and administrative functions across the network. The Engineer collaborates with IT teams, vendors, and hospital stakeholders to align server infrastructure with organizational goals and regulatory requirements. This position will be a technology advocate throughout the organization for the effective application of technology to meet business needs and to support business changes and growth. Technology functions include cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
Experience:
About Us
Joining the Guthrie team allows you to become a part of a tradition of excellence in health care. In all areas and at all levels of Guthrie, you’ll find staff members who have committed themselves to serving the community.
The Guthrie Clinic is an Equal Opportunity Employer.
The Guthrie Clinic is a non-profit, integrated, practicing physician-led organization in the Twin Tiers of New York and Pennsylvania. Our multi-specialty group practice of more than 500 physicians and 302 advanced practice providers offers 47 specialties through a regional office network providing primary and specialty care in 22 communities. Guthrie Medical Education Programs include General Surgery, Internal Medicine, Emergency Medicine, Family Medicine, Anesthesiology and Orthopedic Surgery Residency, as well as Cardiovascular, Gastroenterology and Pulmonary Critical Care Fellowship programs. Guthrie is also a clinical campus for the Geisinger Commonwealth School of Medicine.
Remote working/work at home options are available for this role.
Position is hybrid with requirement to travel to Sayre, PA at least once a month.
Summary:
The Engineer, Compute System Engineering is responsible for the implementation and support of compute based infrastructure, including public, private and hybrid cloud deployment models to support critical healthcare operations across The Guthrie Clinic (TGC). This role ensures high availability and performance for clinical systems, patient care services, and administrative functions across the network. The Engineer collaborates with IT teams, vendors, and hospital stakeholders to align server infrastructure with organizational goals and regulatory requirements. This position will be a technology advocate throughout the organization for the effective application of technology to meet business needs and to support business changes and growth. Technology functions include cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
Experience:
- Preferred three to five (3 to 5) years of experience in implementing and managing Windows and Open Systems server infrastructure hybrid cloud solutions in an enterprise environment; healthcare experience preferred.
- Highly experienced information systems professional with a strong technical background and proven track record of accomplishments in a large, complex multi-level organization .
- Strong technical knowledge of VMWare ESX and Microsoft Hyper-V.
- Expertise in Microsoft Windows, Linux and AIX operating systems and management.
- Familiar with hyperconverged infrastructures such as VxRail.
- Familiar with Microsoft Azure Arc, System Center, Admin Center and SCCM.
- Familiar with cloud platforms (e.g., AWS, Azure, Google Cloud).
- Experience in infrastructure-as-code (e.g., Terraform, CloudFormation) and containerization (e.g., Docker, Kubernetes).
- Experience in scripting (PowerShell, Python, Bash, etc.)
- Familiar with application delivery solutions such as Citrix.
- Experience with storage and data protection replication methodologies.
- Experience with Epic Infrastructure such as Hyperspace.
- Experience with ITSM functionalities such as change control, CMDB and ticketing systems.
- Strong knowledge of healthcare information systems (e.g., Epic, Cerner), cybersecurity and clinical operations.
- Prior experience delivering high availability systems in a 24/7 environment across geographically dispersed business units.
- Demonstrated ability to facilitate evaluation of technologies and achieve consensus on technical standards and solutions among a diverse group of information technology professionals.
- Demonstrated commitment to customer service who has provided responsive and effective support, developed solid working relationships with customers, and delivered high quality, value-added services that met/exceeded customer expectations.
- Equally adept at developing technology strategies and the operation of existing technical infrastructures. Significant experience and knowledge of computing architecture and implementation of networked computing structures.
- Polished professional with demonstrated information technology experience and strong communication skills that can rapidly gain and maintain credibility with customers and IT colleagues.
- Bachelor’s degree in Information Technology, Computer Science, Healthcare Administration or related field strongly desired or an equivalent combination of education and experience.
- Preferred certifications include Microsoft Certified: Azure Fundamentals, VCP-DCV, ECSA.
- Responsible for installation and maintenance of server infrastructure along with upgrading/configuration and the life cycle management of hardware.
- Monitors functions of server infrastructure to ensure acceptable performance.
- Creates and maintains documentation related to server configuration and environments.
- Serves as subject matter expert across server operating systems and solutions (Microsoft Windows Server, Linux, AIX, VMWare ESX, Microsoft Hyper-V)
- Troubleshoots and resolves server and virtualization incidents.
- Maintain server patching to address security vulnerabilities.
- Collaborate with cloud compute architect to design and build functional server environments.
- Provide level 2 escalation support and troubleshooting to resolve complex server incidents and tasks.
- Stay current on cloud and systems engineering trends (e.g., serverless computing, containerization, AI-driven automation) and evaluate their potential to enhance TGC operations.
- Ensure systems, applications and data are high availability, backed up and/or replicated to meet disaster and business recovery requirements.
- Implement and enforce security requirements to protect Azure-based systems and data.
- Anticipates and provides solutions for complex problems and issues, recommends upgrades and enhancements. Rapidly absorbs complex technical and conceptual information to identify issues and implications. Able to present understandable alternatives to both technical and non-technical individuals at all levels of the organization.
- Monitors industry trends, maintains knowledge of developments in cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
- Promotes the use of TGC’s PMO methodology and standards to manage IT initiatives.
- Demonstrates commitment to customer service by providing responsive and effective support, developing solid working relationships with customers and IT colleagues, and delivering high quality, value-added services that exceed customer expectations.
- Demonstrates a commitment to excellence in Customer Service with all internal and external customers of TGC.
- Performs related duties as assigned and unrelated duties as requested.
About Us
Joining the Guthrie team allows you to become a part of a tradition of excellence in health care. In all areas and at all levels of Guthrie, you’ll find staff members who have committed themselves to serving the community.
The Guthrie Clinic is an Equal Opportunity Employer.
The Guthrie Clinic is a non-profit, integrated, practicing physician-led organization in the Twin Tiers of New York and Pennsylvania. Our multi-specialty group practice of more than 500 physicians and 302 advanced practice providers offers 47 specialties through a regional office network providing primary and specialty care in 22 communities. Guthrie Medical Education Programs include General Surgery, Internal Medicine, Emergency Medicine, Family Medicine, Anesthesiology and Orthopedic Surgery Residency, as well as Cardiovascular, Gastroenterology and Pulmonary Critical Care Fellowship programs. Guthrie is also a clinical campus for the Geisinger Commonwealth School of Medicine.
Remote working/work at home options are available for this role.
permanent
jobs by
✓ All jobs loaded