Engineering Structures Jobs in Plano Texas Remote

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.

Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.

Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. LEADERSHIP AND MANAGEMENT RESPONSIBILITIES Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements. Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer. Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility. Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly. TECHNICAL MANAGEMENT RESPONSIBILITIES · Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.