Engineering Structures Jobs in Plainfield Indiana Remote
411 positions found — Page 2
Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.
Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.
Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.
What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.
Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.
Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.
Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
TMC Transportation is the nation’s largest employee-owned, open deck transportation company. Founded in 1972 and headquartered in Des Moines, Iowa, TMC provides expert transportation services and supply-chain management solutions \throughout the 48 contiguous states. If you’re seeking a rewarding career at a dynamic company built on integrity, innovation and dedication to quality and customer service, then join us in our Destination of Excellence.
TMC Offers:
- Competitive Salary
- Comprehensive Benefit Package
- 401(k) Plan
- Employee Ownership - ESOP!
TMC Transportation has immediate full-time openings for Diesel Technician working out of our shop in Brownsburg, IN.
- Tuesday-Friday 4:30PM-3:00AM ($5 shift differential)
- Tuesday-Friday 7:30PM-6AM ($5 shift differential)
- Saturday, Sunday, Monday- 6PM-6AM ($10 shift differential)
Must be able to pass a criminal background and reference check as well as a drug screen and physical.
PRIMARY FUNCTION:
The primary function for a Diesel Technician will be to perform tractor preventative maintenance and repairs to advance mechanical and electrical troubleshooting procedures.
DUTIES AND RESPONSIBILITIES:
- Repair and maintain company tractors and/or trailers using hand tools, precision measuring instruments, and machine tools
- Diagnose, troubleshoot, and examine parts for defects and excessive wear
- Diagnose, troubleshoot, and repair electrical circuits utilizing computer based software diagnostic programs and printed wiring schematics
- Recondition, repair, and/or replace parts
- Perform routine maintenance checks including inspecting the brake system, wheel bearings, electrical system, and air systems
- Diagnose, troubleshoot, and repair engine/driveline/ABS related issues utilizing sound mechanical knowledge and computer-based diagnostic programs
- Ability to set up and use common cutting, welding, and metal fabrication tooling and equipment as needed to complete trailer repairs
- Other duties as assigned
MINIMUM QUALIFICATIONS/EXPERIENCE:
- Technical school degree and/or previous tractor/trailer repair experience
- Must have valid Driver’s License
- Must be attentive to detail
- Strong oral and written communication skills required
- Must be able to handle a fast-paced, physically demanding workload
- Must be able to pass a drug screen and background check
PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT:
- While performing the duties of this job, the employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, or crawl
- Must be able to lift 100lbs repetitively and overhead
- Must be able to climb on/off trailers throughout the shift
Job Type: Full-time
Benefits:
- 401(k)
- 401(k) matching
- Dental insurance
- Flexible spending account
- Health insurance
- Life insurance
- Paid time off
- Referral program
- Retirement plan
- Tuition reimbursement
- Vision insurance
Experience:
- Diesel Engine Repair: 1 year (Required)
Ability to Commute:
- Brownsburg, IN 46112 (Required)
Job Title: PCS-2
Duration: 3-year Contract
Location: Plainfield, IN
**Scheduler role, looking for P6 experience**
**hybrid, 3 days/week in office**
The Planet Group is seeking a Project Controls Specialist II that has had experience with project controls and worked with individuals of varying levels in various organizations and suppliers.
Project Controls Specialist II Qualifications
Required
- Graduation from a two-year college or university - business, finance, project management, engineering, technical, or equivalent
- Minimum of 2 years of project controls scheduling experience using primavera (P6)
- Minimum of 5 years of project controls scheduling experience using primavera (p6) in lieu of a degree
- Working knowledge of project controls principles
- Working Knowledge to Proficiency with project management / project controls concepts / computer applications such as scheduling software, financial tools, spreadsheets; proven collaborative team member
- Preferred Graduation from a four-year college or university -business, finance, project management, engineering, technical, or equivalent. PMI or AACE certification (the following or equivalent are acceptable - PMP, CAPM, PMI-SP, AACE-CCC, AACE-PSP, AACE-CEP, AACE-EVP)
- Software such as Primavera, Business Objects, Passport, MS Office Suite, Prolog, Visio, Powerplant, Maximo, PeopleSoft
Project Controls Specialist II
- Description Responsible for initiating and completing routine aspects of project control assignments with general oversight
- Workers effectively apply fundamental project controls principles and procedures to work that is fairly complex and varied
- An understanding of associated project controls software, must have hands on experience using primavera (P6) as the scheduling software
- Will also perform project cost analysis, forecasting and variance analysis
- Have experience / capability to lead schedule review meetings and work with the project team to obtain information to build / update the project schedule
Here, you’ll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry.
You will help our customers keep their vehicles in shape and on the road.
Whether you’re looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you.
Why is this job awesome? For starters, no day is the same.
You’ll get to work on lots of different types of equipment—not just one manufacturer.
We work hard to get the job done, but we also make sure you have the time you need to do the job right.
Safety and reliability are our top priorities.
Working alongside experienced supervisors and master technicians, we’ll teach you about our vehicle maintenance processes and the cutting-edge technology we use.
And we will make sure you are getting the industry certified training you need to succeed and grow your career.
You’ll learn from the best in the industry.
We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools.
If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team.
Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske’s technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums: 2nd shift ($2.50/hr), 3rd shift ($3.50/hr) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider) • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver’s license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.
• Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role.
The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years.
Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.
• Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required.
Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.
Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period.
• The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls.
• The associate must be able to work safely at heights using applicable ladders and elevated working platforms.
• The associate must be able to safely work in all weather conditions.
• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.
• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds.
Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward.
With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.
Visit Go Penske to learn more.
Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 4304 W Morris St Primary Location: US-IN-Indianapolis Employer: Penske Truck Leasing Co., L.P.
Req ID: 2602080
• Practical experience with Microbiology method verification and routine testing practices, EM Monitoring and basic knowledge of method/equipment validation principle and methodologies preferred • HPLC knowledge is required • Ability to interpret analytical data and convert into technical documentation • Basic knowledge and understanding of aseptic principles and techniques Applicant Notices & Disclaimers For information on benefits, equal opportunity employment, and location-specific applicant notices, click here At SPECTRAFORCE, we are committed to maintaining a workplace that ensures fair compensation and wage transparency in adherence with all applicable state and local laws.
This position's starting pay is: $40.00/hr.
Verifying that product quality attributes Implementing changes to the quality system Ensure sound quality decisions are made Identify ways to provide quality control and quality assurance through the inspection and reporting process Ensure accuracy and completeness of quality review Adhere to the laboratory's quality control policies Adhere to all requirements of established quality systems Ensure awareness of quality issues on the project Perform quality check on manufacturing shop drawings Provide quality inspections on all related items Develop and implement quality systems and procedures Perform quality check on metal fabrication documents Assist in quality audits and perform corrective actions Maintain high standards for quality work and responsiveness Assist in coordinating external vendor and subcontractor quality audits Take the initiative to improve the quality of operations and to improve and maintain a quality culture with a goal of consistency Take the initiative to improve the quality of operations and to improve and maintain a quality culture Conducting and forming corrective action plans for internal quality audits, customer quality audits and regulatory inspections Assist quality, engineering and production personnel with investigations of part defects or any quality related issues Review quality data and make proposals for continuous improvement
We’re seeking dependable individuals who want to build a side income alongside their full-time work. This role offers flexible tasks you can perform outside your regular job hours. You’ll be given structured guidance and tools to identify side hustles that complement your main job, without conflict or burnout.
Responsibilities:
Work through curated side-hustle ideas and evaluate which suit your skills and schedule
Test and implement methods to generate extra income (e.g. remote tasks, micro-projects)
Track your time and earnings; maintain simple reports
Adjust your workflow and focus on the side hustles that deliver the best return
Requirements:
Must have a full-time job already (or other main commitment)
Reliable internet access and a device (laptop, tablet or smartphone)
Basic organization skills and ability to work independently
Willingness to learn and experiment
Preferred Qualities:
Self-motivated
Good at managing time
Comfortable trying new things
Able to commit a few hours each week
Benefits:
Work on your own schedule (evenings/weekends)
Low risk; minimal overhead
Opportunity to scale income over time
Support and guidance provided
We’re looking for people interested in a part-time remote opportunity to supplement their main income. This position is ideal for professionals, freelancers, and anyone who wants to improve their financial situation with flexible, manageable work.
You’ll receive access to structured resources explaining simple, effective ways to earn extra income using your existing skills and free time.
Responsibilities:
Review step-by-step guides and apply them independently
Choose methods that fit your experience and lifestyle
Monitor and report your own results to measure progress
Maintain consistency and reliability
Requirements:
Reliable internet connection and basic computer literacy
Strong self-motivation and time management
Comfortable working independently
Willingness to learn new approaches
Benefits:
Remote and flexible schedule
No selling or cold calling
Practical ways to build a stable side income
Opportunity for long-term financial growth
Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.
Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.
Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.
What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.
Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.
Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.
Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.
Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.
Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.
What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.
Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.
Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.
Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Position Summary:
Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.
As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.
You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.
Responsibilities include but not limited to:
Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms
Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions
Qualifications:
Hands-on experience engineering and supporting cloud-based telephony or contact center platforms
Strong understanding of VoIP technologies, SIP, and call routing concepts
RingCentral and RingCentral Contact Center engineering
NiCE inContact / CXone administration and development
Cyara or similar modern telephony orchestration platforms
Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments
Solid knowledge of networking concepts related to real-time communications
Preferred Qualifications:
Supporting remote contact center agents
REST API integrations and automation
Scripting using PowerShell or Python
Workforce management, call recording, or speech technologies
PSTN carrier and phone number lifecycle management
This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.
#LI-Hybrid**This position willhave a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
