Engineering Structures Jobs in Peyton El Paso County Co Remote
371 positions found
Mgr Patient Safety RN
✦ New 🏢 UCHealth
$47.57 - $76.11 / hour
Description
Location: UCHealth UCHlth Leprino Building AMC, US:CO:Aurora
Department: Clinical Quality
Work Schedule: Full Time, 0.00 hours per pay period (2 weeks)
Shift: Days
Pay: $47.57 - $76.11 / hour. Pay is dependent on applicant's relevant experience
This position is an onsite role and does not offer a hybrid or remote option
Schedule a meeting with me - Recruiter: Kristine Feuerborn - [email protected] - (3
Summary:
Oversee the management of a facility and/or regional based patient safety program.
Responsibilities:
Develops facility and/or regional patient safety program priorities and effectively guides program to achieve zero preventable harm. Manages staff relations including performance management, staff satisfaction, and conflict management. Performs and oversees scheduling, recruitment, and payroll.
Oversees the timely evaluation and follow up of patient safety event reviews, including Root Cause Analyses, structured debriefs and Apparent Cause Analyses, to ensure thorough investigation and action planning to prevent recurrence. Conducts Failure Modes Effectiveness Analyses as a proactive tool to mitigate future patient harm.
Utilizes statistical methods to identify, evaluate, and report patient safety trends to key stakeholders.
Collaborates with Regulatory, Quality, Infection Prevention, Risk Management, Patient Representatives, Medical Staff, and Leadership to improve patient outcomes.
Within scope of job, requires critical thinking skills, decisive judgement and the ability to work with minimal supervision. Must be able to work in a fast-paced environment and take appropriate action.
Requirements:
Employees are our number one asset.
UCHealth promotes a culture that invests in professional success and personal well-being through a comprehensive total rewards program. *
Recognition
Health and well-being
Retirement and savings
Education and career growth
*Eligibility for some programs is based on an employee's scheduled work hours.
We improve lives. In big ways through learning, healing, and discovery. In small, personal ways through human connection. But in all ways, we improve lives.
UCHealth always welcomes talent. This position will be open for a minimum of three days and until a top applicant is identified.
UCHealth recognizes and appreciates the rich array of talents and perspectives that equal employment and diversity can offer our institution. As an equal opportunity employer, UCHealth is committed to making all employment decisions based on valid requirements. No applicant shall be discriminated against in any terms, conditions or privileges of employment or otherwise be discriminated against because of the individual's race, color, national origin, language, culture, ethnicity, age, religion, sex, disability, sexual orientation, gender, veteran status, socioeconomic status, or any other characteristic prohibited by federal, state, or local law. UCHealth does not discriminate against any qualified applicant with a disability as defined under the Americans with Disabilities Act and will make reasonable accommodations, when the do not impose an undue hardship on the organization.
Who We Are ( )
AF123
Location: UCHealth UCHlth Leprino Building AMC, US:CO:Aurora
Department: Clinical Quality
Work Schedule: Full Time, 0.00 hours per pay period (2 weeks)
Shift: Days
Pay: $47.57 - $76.11 / hour. Pay is dependent on applicant's relevant experience
This position is an onsite role and does not offer a hybrid or remote option
Schedule a meeting with me - Recruiter: Kristine Feuerborn - [email protected] - (3
Summary:
Oversee the management of a facility and/or regional based patient safety program.
Responsibilities:
Develops facility and/or regional patient safety program priorities and effectively guides program to achieve zero preventable harm. Manages staff relations including performance management, staff satisfaction, and conflict management. Performs and oversees scheduling, recruitment, and payroll.
Oversees the timely evaluation and follow up of patient safety event reviews, including Root Cause Analyses, structured debriefs and Apparent Cause Analyses, to ensure thorough investigation and action planning to prevent recurrence. Conducts Failure Modes Effectiveness Analyses as a proactive tool to mitigate future patient harm.
Utilizes statistical methods to identify, evaluate, and report patient safety trends to key stakeholders.
Collaborates with Regulatory, Quality, Infection Prevention, Risk Management, Patient Representatives, Medical Staff, and Leadership to improve patient outcomes.
Within scope of job, requires critical thinking skills, decisive judgement and the ability to work with minimal supervision. Must be able to work in a fast-paced environment and take appropriate action.
Requirements:
- Registered Nurse
- Certified Professional in Patient Safety
- Bachelor's degree Nursing.
- 3 years of patient safety or quality experience.
- State licensure as a Registered Nurse (RN).
- Certified Professional in Patient Safety required within 2 years of hire.
Employees are our number one asset.
UCHealth promotes a culture that invests in professional success and personal well-being through a comprehensive total rewards program. *
Recognition
- Performance bonus: UCHealth offers a 3-Year Incentive Bonus to recognize employee contributions to our success in quality, patient experience, organizational growth, financial goals and tenure. The bonus accumulates annually each October and is paid out in October during the third year of employment.
- Performance-based pay increase: The Annual Merit Pay Increase recognizes work performance that meets or consistently exceeds performance standards documented through UCHealth's established evaluation process and accounts for increased experience, skills and cost of living.
- Market reviews: All UCHealth positions are reviewed annually to ensure UCHealth base pay aligns with market standards. Base pay rates are adjusted as needed to stay market competitive.
Health and well-being
- Medical, dental and vision coverage.
- Access to 24/7 mental health and well-being support for employees and dependents.
- Discounted gym memberships and fitness resources.
- Free membership.
- Voluntary benefits such as accident insurance, critical illness insurance, group legal plan, identity theft protection, pet insurance, auto and home insurance, and employee discount programs.
- Time away from work: Paid time off (PTO), paid family and medical leave (inclusive of Colorado FAMLI), leaves of absence.
- New employees receive an initial PTO load with first paycheck.
- Employer-provided basic life and accidental death and dismemberment coverage with buy-up coverage options.
- Employer-provided short-term disability and long-term disability with a buy-up coverage option.
Retirement and savings
- 403(b) plan with employer matching contribution.
- Additional 457(b) plan may be available.
- Flexible spending accounts for health care and dependent day care; health savings account available when enrolled in high-deductible (HD) medical plan.
Education and career growth
- UCHealth provides access to academic degrees and certificate programs to promote professional and personal growth.
- Up to 100% of tuition, books and fees paid for by UCHealth for specific educational degrees.
- Other programs may qualify for up to $10,000/year pre-paid by UCHealth or up to $5,250/year in the form of tuition reimbursement.
- Access to LinkedIn Learning, which offers thousands of virtual courses and seminars, and internal professional development opportunities.
- Employees have access to free assistance navigating the Public Service Loan Forgiveness program and submitting their federal student loans for forgiveness.
*Eligibility for some programs is based on an employee's scheduled work hours.
We improve lives. In big ways through learning, healing, and discovery. In small, personal ways through human connection. But in all ways, we improve lives.
UCHealth always welcomes talent. This position will be open for a minimum of three days and until a top applicant is identified.
UCHealth recognizes and appreciates the rich array of talents and perspectives that equal employment and diversity can offer our institution. As an equal opportunity employer, UCHealth is committed to making all employment decisions based on valid requirements. No applicant shall be discriminated against in any terms, conditions or privileges of employment or otherwise be discriminated against because of the individual's race, color, national origin, language, culture, ethnicity, age, religion, sex, disability, sexual orientation, gender, veteran status, socioeconomic status, or any other characteristic prohibited by federal, state, or local law. UCHealth does not discriminate against any qualified applicant with a disability as defined under the Americans with Disabilities Act and will make reasonable accommodations, when the do not impose an undue hardship on the organization.
Who We Are ( )
AF123
permanent
Behavioral Health Clinical Therapist
✦ New 🏢 UCHealth
$33.82 - 50.73
Description
Location: UCHealth CeDAR, US:CO:Aurora Department: CeDAR Administration Work Schedule: Full Time, 80.00 hours per pay period (2 weeks) Shift: Days Pay: $33.82 - $50.73 / hour. Pay is dependent on applicant's relevant experience This position is an onsite role and does not offer a hybrid or remote option Career Ladder: UCHealth offers a structured way for you to grow your skills, responsibilities, and pay in this position. As you gain experience and expertise, you will have the opportunity to move through different levels of this career ladder. Summary:
Provides triage, assessment and treatment to patients and families, assists with disposition planning and provision of education and resources, initiates psychiatric holds. Operates as an independently licensed behavioral health clinician. Responsibilities:
Location: UCHealth CeDAR, US:CO:Aurora Department: CeDAR Administration Work Schedule: Full Time, 80.00 hours per pay period (2 weeks) Shift: Days Pay: $33.82 - $50.73 / hour. Pay is dependent on applicant's relevant experience This position is an onsite role and does not offer a hybrid or remote option Career Ladder: UCHealth offers a structured way for you to grow your skills, responsibilities, and pay in this position. As you gain experience and expertise, you will have the opportunity to move through different levels of this career ladder. Summary:
Provides triage, assessment and treatment to patients and families, assists with disposition planning and provision of education and resources, initiates psychiatric holds. Operates as an independently licensed behavioral health clinician. Responsibilities:
- Implements counseling/therapy for assigned patients in both individual and group settings. Interviews and assesses patients and/or patient's family, caregivers, and/or legal representatives.
- Determines, provides and/or arranges for needed internal and external services/interventions. Participates and/or arranges case reviews/care conferences to evaluate progress.
- Assists with discharge planning and processes, including identification of community-based resources, and provides referrals as part of the discharge plan. Assesses, collaborates and coordinates patient's discharge planning needs and readiness for discharge with other members of the care team.
- Utilizes appropriate teaching methods and/or referrals to ensure patient/family educational needs are met. Participates and/or trains new staff, students and interns as assigned.
- Within scope of job, requires critical thinking skills, decisive judgement and the ability to work with minimal supervision. Must be able to work in a fast-paced environment and take appropriate action.
- Master's Degree in Social Work, Counseling, Psychology, or a related field.
- State licensure as Licensed Clinical Social Worker (LCSW), Licensed Professional Counselor (LPC), Marriage and Family Therapist (MFT), or Licensed Addiction Counselor (ACD), or other licensure/certification may be acceptable as approved by department leadership.
- Performance bonus: UCHealth offers a 3-Year Incentive Bonus to recognize employee contributions to our success in quality, patient experience, organizational growth, financial goals and tenure. The bonus accumulates annually each October and is paid out in October during the third year of employment.
- Performance-based pay increase: The Annual Merit Pay Increase recognizes work performance that meets or consistently exceeds performance standards documented through UCHealth's established evaluation process and accounts for increased experience, skills and cost of living.
- Market reviews: All UCHealth positions are reviewed annually to ensure UCHealth base pay aligns with market standards. Base pay rates are adjusted as needed to stay market competitive.
- Medical, dental and vision coverage.
- Access to 24/7 mental health and well-being support for employees and dependents.
- Discounted gym memberships and fitness resources.
- Free membership.
- Voluntary benefits such as accident insurance, critical illness insurance, group legal plan, identity theft protection, pet insurance, auto and home insurance, and employee discount programs.
- Time away from work: Paid time off (PTO), paid family and medical leave (inclusive of Colorado FAMLI), leaves of absence.
- New employees receive an initial PTO load with first paycheck.
- Employer-provided basic life and accidental death and dismemberment coverage with buy-up coverage options.
- Employer-provided short-term disability and long-term disability with a buy-up coverage option.
- 403(b) plan with employer matching contribution.
- Additional 457(b) plan may be available.
- Flexible spending accounts for health care and dependent day care; health savings account available when enrolled in high-deductible (HD) medical plan.
- UCHealth provides access to academic degrees and certificate programs to promote professional and personal growth.
- Up to 100% of tuition, books and fees paid for by UCHealth for specific educational degrees.
- Other programs may qualify for up to $10,000/year pre-paid by UCHealth or up to $5,250/year in the form of tuition reimbursement.
- Access to LinkedIn Learning, which offers thousands of virtual courses and seminars, and internal professional development opportunities.
- Employees have access to free assistance navigating the Public Service Loan Forgiveness program and submitting their federal student loans for forgiveness.
permanent
Cardiac Sonographer
🏢 UCHealth
$42.01 - $58.82 / hour
Description
Location: UCHealth UCHlth Memorial Hosp Central, US:CO:Colorado Springs
Department: Echo Cardiology North
FTE: Full Time, 1.0, 80.00 hours per pay period (2 weeks)
Shift: Days
Pay: $42.01 - $58.82 / hour. Pay is dependent on applicant's relevant experience
Summary:
Performs echocardiogram procedures to assess cardiac structures and hemodynamics in accordance with applicable scope and standards of practice and independent of supervision.
Responsibilities:
Requirements:
We improve lives. In big ways through learning, healing, and discovery. In small, personal ways through human connection. But in all ways, we improve lives.
UCHealth invests in its Workforce.
UCHealth offers a Three Year Incentive Bonus to recognize employee's contributions to our success in quality, patient experience, organizational growth, financial goals, and tenure with UCHealth. The bonus accumulates annually each October and is paid out in October following completion of three years' employment.
UCHealth offers their employees a competitive and comprehensive total rewards package (benefit eligibility is based off of FTE status):
Loan Repayment:
UCHealth always welcomes talent. This position will be open for a minimum of three days and until a top applicant is identified.
UCHealth recognizes and appreciates the rich array of talents and perspectives that equal employment and diversity can offer our institution. As an equal opportunity employer, UCHealth is committed to making all employment decisions based on valid requirements. No applicant shall be discriminated against in any terms, conditions or privileges of employment or otherwise be discriminated against because of the individual's race, color, national origin, language, culture, ethnicity, age, religion, sex, disability, sexual orientation, gender, veteran status, socioeconomic status, or any other characteristic prohibited by federal, state, or local law. UCHealth does not discriminate against any qualified applicant with a disability as defined under the Americans with Disabilities Act and will make reasonable accommodations, when they do not impose an undue hardship on the organization.
Who We Are ( )
AF123
Location: UCHealth UCHlth Memorial Hosp Central, US:CO:Colorado Springs
Department: Echo Cardiology North
FTE: Full Time, 1.0, 80.00 hours per pay period (2 weeks)
Shift: Days
Pay: $42.01 - $58.82 / hour. Pay is dependent on applicant's relevant experience
Summary:
Performs echocardiogram procedures to assess cardiac structures and hemodynamics in accordance with applicable scope and standards of practice and independent of supervision.
Responsibilities:
- Reviews patient history and physician's orders. Educates patient regarding procedures, equipment and exam to ensure patient's understanding and cooperation. Sets expectations for patient receipt of exam results.
- Independently performs echocardiography procedures on patients. Selects and uses transducers according to anatomy; differentiates normal and abnormal structures; assures that sufficient information has been acquired to provide diagnosis.
- Selects appropriate exposure factors and imaging parameters. When indicated, prepares and administers contrast media and/or medications within scope of practice. Monitors patient condition and reports changes in status.
- Implements safety standards and performs appropriate quality control procedures on equipment. Troubleshoots, resolves, and/or reports equipment malfunctions. Analyzes results and identifies issues with the quality of imaging results. Enters, transmits and reports scan results.
- Within scope of job, requires critical thinking skills, decisive judgement and the ability to work with minimal supervision. Must be able to work in a fast-paced environment and take appropriate action.
Requirements:
- * Registered Sonographer
* Reg Diagnostic Cardiac Sonographer
* Registered Cardiovascular Sonographer - Graduate of an accredited Cardiac Sonography program OR Associate's degree in allied health OR a Bachelor's degree in any area.
Required Licensure/Certification: Registered Diagnostic Cardiac Sonographer (RDCS) by the American Registry for Diagnostic Medical Sonography (ARDMS), or Registered Cardiac Sonographer (RCS) by Cardiovascular Credentialing International (CCI).
Minimum Experience: None Required. 1 year preferred. - BLS through the American Heart Association or the American Red Cross CPR for the Professional Rescuer with card in-hand before start date. BLS or CPR card must be good through sixty days of hire.
We improve lives. In big ways through learning, healing, and discovery. In small, personal ways through human connection. But in all ways, we improve lives.
UCHealth invests in its Workforce.
UCHealth offers a Three Year Incentive Bonus to recognize employee's contributions to our success in quality, patient experience, organizational growth, financial goals, and tenure with UCHealth. The bonus accumulates annually each October and is paid out in October following completion of three years' employment.
UCHealth offers their employees a competitive and comprehensive total rewards package (benefit eligibility is based off of FTE status):
- Medical, dental and vision coverage including coverage for eligible dependents
- 403(b) with employer matching contributions
- Time away from work: paid time off (PTO), paid family and medical leave (inclusive of Colorado FAMLI), leaves of absence; start your employment at UCHealth with PTO in your bank
- Employer-paid basic life and accidental death and dismemberment coverage with buy-up coverage options
- Employer paid short term disability and long-term disability with buy-up coverage options
- Wellness benefits
- Full suite of voluntary benefits such as flexible spending accounts for health care and dependent care, health savings accounts (available with HD/HSA medical plan only), identity theft protection, pet insurance, and employee discount programs
- Education benefits for employees, including the opportunity to be eligible for 100% of tuition, books and fees paid for by UCHealth for specific educational degrees. Other programs may qualify for up to $5,250 pre-paid by UCHealth or in the form of tuition reimbursement each calendar year
Loan Repayment:
- UCHealth is a qualifying employer for the federal Public Service Loan Forgiveness (PSLF) program! UCHealth provides employees with free assistance navigating the PSLF program to submit their federal student loans for forgiveness through Savi.
UCHealth always welcomes talent. This position will be open for a minimum of three days and until a top applicant is identified.
UCHealth recognizes and appreciates the rich array of talents and perspectives that equal employment and diversity can offer our institution. As an equal opportunity employer, UCHealth is committed to making all employment decisions based on valid requirements. No applicant shall be discriminated against in any terms, conditions or privileges of employment or otherwise be discriminated against because of the individual's race, color, national origin, language, culture, ethnicity, age, religion, sex, disability, sexual orientation, gender, veteran status, socioeconomic status, or any other characteristic prohibited by federal, state, or local law. UCHealth does not discriminate against any qualified applicant with a disability as defined under the Americans with Disabilities Act and will make reasonable accommodations, when they do not impose an undue hardship on the organization.
Who We Are ( )
AF123
permanent
Respiratory Therapist - Float Pool
🏢 UCHealth
$31.61 - $47.41 / hour
Description
Location: UCHealth Anschutz Inpatient Pavilion, Aurora, CO
Department: UCHealth Enterprise Float Pool
Work Schedule: Full Time, 72.00 hours per pay period (2 weeks)
Shift: Day and Night Rotation
Pay: $31.61 - $47.41 / hour. Pay is dependent on applicant's relevant experience
This position is an onsite role and does not offer a hybrid or remote option
Career Ladder: UCHealth offers a structured way for you to grow your skills, responsibilities, and pay in this position. As you gain experience and expertise, you will have the opportunity to move through different levels of this career ladder.
Minimum Requirements:
At UCHealth, We Improve Lives
Picture yourself on a dynamic team improving lives in the following way(s):
Respiratory Therapist:
Employees are our number one asset.
UCHealth promotes a culture that invests in professional success and personal well-being through a comprehensive total rewards program. *
Recognition
Health and well-being
Retirement and savings
Education and career growth
*Eligibility for some programs is based on an employee's scheduled work hours.
We improve lives. In big ways through learning, healing, and discovery. In small, personal ways through human connection. But in all ways, we improve lives.
UCHealth always welcomes talent. This position will be open for a minimum of three days and until a top applicant is identified.
UCHealth recognizes and appreciates the rich array of talents and perspectives that equal employment and diversity can offer our institution. As an equal opportunity employer, UCHealth is committed to making all employment decisions based on valid requirements. No applicant shall be discriminated against in any terms, conditions or privileges of employment or otherwise be discriminated against because of the individual's race, color, national origin, language, culture, ethnicity, age, religion, sex, disability, sexual orientation, gender, veteran status, socioeconomic status, or any other characteristic prohibited by federal, state, or local law. UCHealth does not discriminate against any qualified applicant with a disability as defined under the Americans with Disabilities Act and will make reasonable accommodations, when the do not impose an undue hardship on the organization.
Who We Are ( )
Location: UCHealth Anschutz Inpatient Pavilion, Aurora, CO
Department: UCHealth Enterprise Float Pool
Work Schedule: Full Time, 72.00 hours per pay period (2 weeks)
Shift: Day and Night Rotation
Pay: $31.61 - $47.41 / hour. Pay is dependent on applicant's relevant experience
This position is an onsite role and does not offer a hybrid or remote option
Career Ladder: UCHealth offers a structured way for you to grow your skills, responsibilities, and pay in this position. As you gain experience and expertise, you will have the opportunity to move through different levels of this career ladder.
Minimum Requirements:
- Graduate of an accredited Respiratory Therapy program.
- Registered as a Respiratory Therapist (RRT) by the National Board for Respiratory Care (NBRC).
- State licensure if required by law.
- Advanced Cardiac Life Support
- PALS Certification
- Neonatal Resuscitation Program
- BLS through the American Heart Association or the American Red Cross CPR for the Professional Rescuer with card in-hand before start date. BLS or CPR card must be good through sixty days of hire.
At UCHealth, We Improve Lives
Picture yourself on a dynamic team improving lives in the following way(s):
- Provides top of scope practice in direct patient care environment utilizing respiratory therapy protocols and best practices to promote optimized care
- Values and effectively partners with a multidisciplinary team to achieve exceptional care outcomes
- Prioritizes wellness, a patient perspective and evidence-based practice
- Models proficiency through precepting those new to healthcare and/or UCHealth
- Welcomes new knowledge in a fast paced, innovative clinical environment
- Contributes to secure safety and quality at the point of care
Respiratory Therapist:
- Practices in technologically complex clinical setting managing ventilator integration to adaptive pulmonary support and airway management throughout multiple levels of care.
- Clinical ladders encourage internal growth and promotional opportunity through implantation of various clinical and process improvement projects at the unit, division, regional or system level.
Employees are our number one asset.
UCHealth promotes a culture that invests in professional success and personal well-being through a comprehensive total rewards program. *
Recognition
- Performance bonus: UCHealth offers a 3-Year Incentive Bonus to recognize employee contributions to our success in quality, patient experience, organizational growth, financial goals and tenure. The bonus accumulates annually each October and is paid out in October during the third year of employment.
- Performance-based pay increase: The Annual Merit Pay Increase recognizes work performance that meets or consistently exceeds performance standards documented through UCHealth's established evaluation process and accounts for increased experience, skills and cost of living.
- Market reviews: All UCHealth positions are reviewed annually to ensure UCHealth base pay aligns with market standards. Base pay rates are adjusted as needed to stay market competitive.
Health and well-being
- Medical, dental and vision coverage.
- Access to 24/7 mental health and well-being support for employees and dependents.
- Discounted gym memberships and fitness resources.
- Free membership.
- Voluntary benefits such as accident insurance, critical illness insurance, group legal plan, identity theft protection, pet insurance, auto and home insurance, and employee discount programs.
- Time away from work: Paid time off (PTO), paid family and medical leave (inclusive of Colorado FAMLI), leaves of absence.
- New employees receive an initial PTO load with first paycheck.
- Employer-provided basic life and accidental death and dismemberment coverage with buy-up coverage options.
- Employer-provided short-term disability and long-term disability with a buy-up coverage option.
Retirement and savings
- 403(b) plan with employer matching contribution.
- Additional 457(b) plan may be available.
- Flexible spending accounts for health care and dependent day care; health savings account available when enrolled in high-deductible (HD) medical plan.
Education and career growth
- UCHealth provides access to academic degrees and certificate programs to promote professional and personal growth.
- Up to 100% of tuition, books and fees paid for by UCHealth for specific educational degrees.
- Other programs may qualify for up to $10,000/year pre-paid by UCHealth or up to $5,250/year in the form of tuition reimbursement.
- Access to LinkedIn Learning, which offers thousands of virtual courses and seminars, and internal professional development opportunities.
- Employees have access to free assistance navigating the Public Service Loan Forgiveness program and submitting their federal student loans for forgiveness.
*Eligibility for some programs is based on an employee's scheduled work hours.
We improve lives. In big ways through learning, healing, and discovery. In small, personal ways through human connection. But in all ways, we improve lives.
UCHealth always welcomes talent. This position will be open for a minimum of three days and until a top applicant is identified.
UCHealth recognizes and appreciates the rich array of talents and perspectives that equal employment and diversity can offer our institution. As an equal opportunity employer, UCHealth is committed to making all employment decisions based on valid requirements. No applicant shall be discriminated against in any terms, conditions or privileges of employment or otherwise be discriminated against because of the individual's race, color, national origin, language, culture, ethnicity, age, religion, sex, disability, sexual orientation, gender, veteran status, socioeconomic status, or any other characteristic prohibited by federal, state, or local law. UCHealth does not discriminate against any qualified applicant with a disability as defined under the Americans with Disabilities Act and will make reasonable accommodations, when the do not impose an undue hardship on the organization.
Who We Are ( )
permanent
F
Side Hustle Specialist (Evenings & Weekends)
$300-$1,200 per month (part-time) - monthly
We’re seeking dependable individuals who want to build a side income alongside their full-time work. This role offers flexible tasks you can perform outside your regular job hours. You’ll be given structured guidance and tools to identify side hustles that complement your main job, without conflict or burnout.
Responsibilities:
Work through curated side-hustle ideas and evaluate which suit your skills and schedule
Test and implement methods to generate extra income (e.g. remote tasks, micro-projects)
Track your time and earnings; maintain simple reports
Adjust your workflow and focus on the side hustles that deliver the best return
Requirements:
Must have a full-time job already (or other main commitment)
Reliable internet access and a device (laptop, tablet or smartphone)
Basic organization skills and ability to work independently
Willingness to learn and experiment
Preferred Qualities:
Self-motivated
Good at managing time
Comfortable trying new things
Able to commit a few hours each week
Benefits:
Work on your own schedule (evenings/weekends)
Low risk; minimal overhead
Opportunity to scale income over time
Support and guidance provided
temporary
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded