Engineering Structures Jobs in Oxnard Ventura County Ca Remote

415 positions found — Page 2

Aviation Electrician's Mate
Salary not disclosed
Oxnard, California 1 week ago

Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.

Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.

Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.

What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.

Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.

Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.

Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Account Executive
Salary not disclosed
Camarillo, CA 1 week ago
B2B Sales Executive (Territory Manager)Streamline Office Solutions | Ventura County, CA

Base Salary + Uncapped Commission | Top Reps Earn $120K–$200K+

Are you a high-performing B2B sales professional who wants to control your income and build a long-term territory?

Are you tired of corporate red tape, capped commissions, or leadership that slows down deals instead of helping you win them?

At Streamline Office Solutions, we believe great salespeople succeed when they have freedom, support, and the ability to earn what they’re worth.

For over 30 years, we’ve helped businesses across Ventura, Santa Barbara, and Los Angeles Counties modernize their office technology and document workflows. Our sales team thrives in an environment built on trust, ownership, and performance.

We’re looking for a driven B2B Sales Executive / Territory Manager who enjoys prospecting, building relationships with business leaders, and delivering real solutions that improve how companies operate.

If you’re a hunter with an entrepreneurial mindset who wants to grow a territory and build a strong book of business, this could be the opportunity you’ve been looking for.

What You'll Do

• Develop and grow your assigned sales territory through prospecting and relationship-building

• Generate meetings through phone outreach, email campaigns, LinkedIn, networking, and in-person visits

• Conduct consultative discovery meetings with business owners, executives, and operations leaders

• Identify inefficiencies in office technology, printing workflows, and document management systems

• Present customized solutions including Managed Print Services, document management software, and office technology platforms

• Build long-term client partnerships and become a trusted advisor

• Maintain an organized pipeline using company sales tools and CRM

What We’re Looking For

3+ years of B2B sales experience

• Proven ability to prospect and close new business

• Strong communication, presentation, and relationship-building skills

• Competitive mindset with strong self-motivation

• Entrepreneurial attitude and ability to manage your own territory

• Experience in technology, office equipment, SaaS, IT services, or managed services is a plus

• Bachelor’s degree preferred but not required for experienced sales professionals

Compensation & Benefits

Base Salary: $60,000

Uncapped Commission Structure

Top Performers Earn $120K–$200K+ Annually

• Monthly and quarterly bonus opportunities

401(k) retirement plan

• Auto reimbursement / mileage support

• Cell phone reimbursement

• Ongoing training and professional development

• Established brand with strong local reputation

• Supportive leadership focused on helping salespeople win

Sales Tools & Support

We invest in tools and resources to help our sales team succeed.

• CRM and pipeline management tools

• Marketing support and lead generation programs

• Product specialists and technical support

• Industry-leading partners including Toshiba, Lexmark, and Epson

Career Growth Opportunities

At Streamline Office Solutions, top performers have opportunities to grow into:

• Senior Sales Executive

• Strategic Account Manager

• Sales Leadership roles

We believe in promoting from within and rewarding performance.

About Streamline Office Solutions

Streamline Office Solutions has been serving businesses throughout Ventura County and the Central Coast for more than 30 years.

We specialize in helping organizations improve productivity and reduce costs through advanced document solutions including:

• Managed Print Services

• Multi-function printers and production systems

• Document management software

• Scanning, copying, fax, and wide-format solutions

Our team culture blends the stability of an established company with the energy of a performance-driven sales organization.

We move fast, support each other, and celebrate success.

Apply Today

If you’re a motivated sales professional who wants to build a strong territory, grow your income, and work with a company that values top performers, we’d love to talk.

Apply today to start building your career with Streamline Office Solutions.

Not Specified
Fully Remote Radiologist
Salary not disclosed
Oxnard, CA, Remote 1 week ago

100% Remote Radiologist – All Subspecialties | FT, PT, Weekends


Physician-led radiology group in Florida seeking remote Diagnostic Radiologists for Pacific Time evening and overnight coverage. Flexible W-2 or 1099 options available. Ideal for West Coast physicians or moonlighters seeking high-quality specialty work.


Subspecialties Needed:

• Body Imaging

• Neuroradiology

• MSK

• Cardiothoracic


Requirements:

• ABR or AOBR certified

• U.S.-based

• Active U.S. license (IMLC a plus)


Highlights:

• $2,700 evenings | $3,560 nights (PST)

• 2 shifts/week ≈ $283K–$374K

• 4 shifts/week ≈ $567K–$747K+

• Uncapped production + quality bonus (100+ shifts/year)

• Reasonable RVU expectations

• Full benefits + malpractice with tail


Structured support, predictable shifts, and meaningful upside without excessive volume pressure.


Easy Apply encouraged or email CV directly to:


Remote working/work at home options are available for this role.
Not Specified
Executive Director
Salary not disclosed
Camarillo, CA 1 week ago

Executive Director - Senior Living Community


We are seeking an experienced Executive Director in Camarillo, CA

This is a full-time, permanent, salaried position with a trusted senior living operator. Our client places employees at the forefront. You can expect a salary of around $175,000 per year depending on experience. This role is hiring immediately.

Perks

  • Prestigious nationwide Non-Profit Senior Living operator
  • Strong local regional and VP support for team members
  • Great base salary, lucrative commission structure and good benefits package
  • Community with strong reputation in the local market

Sound like a good fit?

We would love to connect with you about this job — and help you open new doors in your career. Contact us anytime via:

  • Text: (949) 793-7711
  • Email:
  • Call: (949) 793-7711

Qualifications

  • 2+ years experience in the role of an Executive Director in Senior Living for Active Aging, Independent Living, Assisted Living, or Memory Care communities.
  • Must have or be able to obtain license.
  • Knowledge of all relevant regulations and policies.
  • Excellent skills in communication, management, organization, and problem-solving.

Responsibilities

  • Oversee all staff and staff-related tasks — including hiring, training, and conflict resolution
  • Ensure quality care for all patients
  • Facilitate communication with resident families
  • Assure compliance with all regulations, policies, and procedures
  • Prepare, maintain, and implement operations budget
  • Develop and carry out marketing strategies

To learn more about this role, connect with us quickly by texting (949) 793-7711, or emailing


Full Spectrum Search Group is a full-service healthcare recruiting agency specializing in long-term care leadership, C-level executives, and healthcare administrators. At Full Spectrum, our team of healthcare recruiters is dedicated to bringing exceptional operators and candidates together.

With over 29 years of collective experience, Full Spectrum has built management and leadership teams for some of the most prominent operators in the country. As a part of the Sanford Rose Associates International network of offices, our clients receive the personalized attention of a boutique search firm supported by the resources of the 9th largest executive search firm in the US. Our firm:

  • Is ranked among the Top 10 U.S. & Americas Search Firms
  • Has been featured in The Wall Street Journal, Fortune, Business Week, CNN
  • Has completed over 112,500 searches with a database of 2,540,000 candidates

The solution is here. Come thrive with us!

Full Spectrum is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Not Specified
Mechanical Engineer
🏢 Jobot
Salary not disclosed
Camarillo 2 weeks ago
Worldwide leader in products for medical/consumer, aerospace, automotive, and industrial applications! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.

Salary: $80,000
- $110,000 per year A bit about us: Our philosophy is to contribute to society through the creation of new value with innovative ideas, technologies, and products.

The success of this philosophy is evidenced through the varied and far-reaching markets that benefit from our materials, including medical/consumer applications, aerospace, automotive, and industrial.

Why join us? Meaningful Work! Industry Leading Products! Competitive Compensation Package! Complete Benefits Package! Accelerated Career Growth! Fun Company Activities! Many More! Job Details Responsibilities: Interface with customers to understand technical needs, performance requirements, and end-use conditions, providing expert advice and guidance.

Translate customer requirements into engineering specifications, drawings, and material/process recommendations, ensuring the development of products that meet or exceed customer expectations.

Participate in prototype builds, sample preparation, and validation testing.

Work with customers and tooling engineers/technicians to refine 3D CAD models for manufacturability.

Support the direct line manager in technical discussions, design reviews, and coordinated customer communication, contributing to the overall effectiveness of the team.

Assist with material selection, layup design, tolerance analysis, and process feasibility studies to ensure optimal product performance and manufacturability.

Develop composite component concepts using CAD and finite element analysis (FEA) tools, supporting Design for Manufacturability (DFM) activities.

Contribute to Stage-Gate deliverables, ensuring engineering tasks are completed on schedule and meet the highest standards of quality and precision.

Qualifications: Bachelor's degree in Mechanical or Aerospace Engineering or a related field.

A Master's degree or higher is a benefit.

2+ years of experience in a similar role within the manufacturing industry.

Understanding of composite materials, design for manufacturability, and new product introduction.

Proficiency in using SolidWorks and exposure to finite element analysis (FEA) tools.

Ability to contribute to to Stage-Gate deliverables and managing engineering tasks on schedule.

Excellent communication skills, with the ability to interface effectively with customers and translate their requirements into actionable engineering specifications.

Strong problem-solving skills, with the ability to anticipate and resolve issues proactively.

Ability to work effectively both independently and as part of a team, demonstrating a commitment to teamwork and collaboration.

Ability to manage multiple tasks and projects simultaneously, demonstrating excellent time management and organizational skills.

If you have a passion for design engineering and are open to working directly with customers to create unique engineering solutions, we would love to hear from you! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.

Jobot is an Equal Opportunity Employer.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.

Jobot also prohibits harassment of applicants or employees based on any of these protected categories.

It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Sometimes Jobot is required to perform background checks with your authorization.

Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Frequency varies for text messages.

Message and data rates may apply.

Carriers are not liable for delayed or undelivered messages.

You can reply STOP to cancel and HELP for help.

You can access our privacy policy here: /privacy-policy
Not Specified
Applications Engineer
🏢 Jobot
Salary not disclosed
Camarillo 2 weeks ago
Worldwide leader in products for medical/consumer, aerospace, automotive, and industrial applications! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.

Salary: $80,000
- $110,000 per year A bit about us: Our philosophy is to contribute to society through the creation of new value with innovative ideas, technologies, and products.

The success of this philosophy is evidenced through the varied and far-reaching markets that benefit from our materials, including medical/consumer applications, aerospace, automotive, and industrial.

Why join us? Meaningful Work! Industry Leading Products! Competitive Compensation Package! Complete Benefits Package! Accelerated Career Growth! Fun Company Activities! Many More! Job Details Responsibilities: Interface with customers to understand technical needs, performance requirements, and end-use conditions, providing expert advice and guidance.

Translate customer requirements into engineering specifications, drawings, and material/process recommendations, ensuring the development of products that meet or exceed customer expectations.

Support the direct line manager in technical discussions, design reviews, and coordinated customer communication, contributing to the overall effectiveness of the team.

Assist with material selection, layup design, tolerance analysis, and process feasibility studies to ensure optimal product performance and manufacturability.

Develop composite component concepts using CAD and finite element analysis (FEA) tools, supporting Design for Manufacturability (DFM) activities.

Contribute to Stage-Gate deliverables, ensuring engineering tasks are completed on schedule and meet the highest standards of quality and precision.

Qualifications: Bachelor's degree in Engineering or a related field.

A Master's degree or higher is preferred.

Minimum of 1+ years of experience in a similar role within the manufacturing industry.

Understanding of composite materials, design for manufacturability, and new product introduction.

Proficiency in using CAD and finite element analysis (FEA) tools.

Ability to contribute to to Stage-Gate deliverables and managing engineering tasks on schedule.

Excellent communication skills, with the ability to interface effectively with customers and translate their requirements into actionable engineering specifications.

Strong problem-solving skills, with the ability to anticipate and resolve issues proactively.

Ability to work effectively both independently and as part of a team, demonstrating a commitment to teamwork and collaboration.

Ability to manage multiple tasks and projects simultaneously, demonstrating excellent time management and organizational skills.

If you have a passion for engineering and a desire to work directly with our customers to create unique solutions towards their goals, we would love to hear from you! Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.

Jobot is an Equal Opportunity Employer.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.

Jobot also prohibits harassment of applicants or employees based on any of these protected categories.

It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Sometimes Jobot is required to perform background checks with your authorization.

Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Frequency varies for text messages.

Message and data rates may apply.

Carriers are not liable for delayed or undelivered messages.

You can reply STOP to cancel and HELP for help.

You can access our privacy policy here: /privacy-policy
Not Specified
Process Engineer
🏢 Jobot
Salary not disclosed
Camarillo 2 weeks ago
Worldwide leader in products for medical/consumer applications, aerospace, automotive, and industrial! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.

Salary: $100,000
- $135,000 per year A bit about us: Our philosophy is to contribute to society through the creation of new value with innovative ideas, technologies, and products.

The success of this philosophy is evidenced through the varied and far-reaching markets that benefit from our materials, including medical/consumer applications, aerospace, automotive, and industrial.

Why join us? Meaningful Work! Industry Leading Products! Competitive Compensation Package! Complete Benefits Package! Accelerated Career Growth! Fun Company Activities! Many More! Job Details Responsibilities: 1.

Utilize your experience in Process / Manufacturing Engineering to optimize manufacturing processes, improve productivity, and reduce costs.

2.

Apply Lean Manufacturing and Six Sigma principles to identify and eliminate waste, streamline processes, and improve product quality.

3.

Drive Continuous Improvement initiatives across the organization, leading cross-functional teams in the implementation of new processes and technologies.

4.

Learn and provide backup support for process engineering activities, including managing Bills of Materials (BOM) and production routers, and assisting with process documentation and updates.

5.

Coordinate with maintenance and technical teams on basic troubleshooting and preventive maintenance planning.

6.

Participate in improvement projects related to productivity, layout, and resource efficiency.

Qualifications: 1.

Bachelor’s degree or above in Engineering, Composites, Material Science, Chemistry, Polymer Science or related technical field preferred.

2.

Minimum of 5 years of experience in Process Engineering, Manufacturing Engineering, Lean Manufacturing, Six Sigma, and Continuous Improvement.

3.

Proven track record of driving process improvements and cost reductions in a manufacturing environment.

4.

Strong problem-solving skills, with an ability to analyze complex data, identify key trends, and develop effective solutions.

5.

Excellent communication and teamwork skills, with an ability to work effectively across all levels of the organization.

6.

Proficient in the use of process mapping and other process improvement tools.

Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.

Jobot is an Equal Opportunity Employer.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.

Jobot also prohibits harassment of applicants or employees based on any of these protected categories.

It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Sometimes Jobot is required to perform background checks with your authorization.

Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Frequency varies for text messages.

Message and data rates may apply.

Carriers are not liable for delayed or undelivered messages.

You can reply STOP to cancel and HELP for help.

You can access our privacy policy here: /privacy-policy
Not Specified
Principal RF Engineer
🏢 Jobot
Salary not disclosed
Camarillo 2 weeks ago
Lead cutting-edge RF Design projects from concept to launch across high-impact commercial and defense programs This Jobot Job is hosted by: Christina Finster Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.

Salary: $150,000
- $190,000 per year A bit about us: We are a leader in Space Communications Electronics.

We supply satellite RF units to Satellite OEMs.

We cover the frequency range from UHF through L, C, X, Ku, Ka and Q Bands.

Our team of highly experienced satellite and payload System Engineers and Program Managers, as well as world-class RF and Product Design engineers and analysts.

This is a team that you can depend on.

Why join us? R&D environment Advanced engineering team to work alongside with Benefits Cutting Edge Space Technology Job Details SUMMARY: As our Principal RF Engineer you will lead as a project engineer for RF products including Oscillators, Central Power Supply Units (CPSUs), Frequency Converters, and Amplifiers for our commercial space customers.

DUTIES & RESPONSIBILITIES: Lead design and development of complex RF products with emphasis on oscillator products Analyze customer requirements and constraints Generate detailed design proposals for customers and provide expert-level advice on trade-off discussions for design concepts Estimate total costs, including material, labor, test and development costs as well as lead time for new products to be quoted Independently complete RF system and circuit design Support analog control circuitry designs for features including voltage regulation, gain control, automatic level control, and temperature compensation Perform detailed analysis of compliance for electrical, mechanical, environmental and regulatory requirements (compliance matrix) for all new products being quoted Determines methods and procedures on new assignments Tune, Test, and Report on prototypes / engineering models Support Operations by creating test data sheets, supporting Integration and Test Provide clear, consistent technical judgment Invent new technologies Mentor junior engineers in areas of RF design and analysis EDUCATION & EXPERIENCE: Bachelor's degree in Electrical Engineering or equivalent related experience Minimum 8 years experience in the RF/Microwave industry Demonstrated RF/MW oscillator design knowledge and competence working in several oscillator topologies with emphasis on ultra-low phase noise Command of RF principles and theories (RF signal cascade, impedance matching, amplifier topologies, multipaction, NF, stability, distortion, etc.) Extensive experience with the simulation, design, test, and realization of RF components Expertise in commercial RF / Microwave 2.5D, 3D simulation software (HFSS, ADS, or Microwave Office/AWR preferred) Expert understanding of RF board-level design (component selection/placement, shielding, microstrip, lumped element matching, distributed matching, etc.) Experience with RF laboratory equipment and RF test methods Experience in all phases of RF product development from proposal phase through production Experience leading multiple projects in different phases of completion Experience reviewing and creating design documentation (schematics, assembly drawings, BOMs, test procedures, etc.) Familiar with schematic capture (OrCAD preferred) Experience reviewing work of junior engineers and providing technical guidance (technical mentoring) Strong oral and written communication skills Able to evaluate Lucix processes and industry best practices to identify areas for improvement Experience with InP VCO design preferred Microwave circuit design experience through Ka-band frequencies preferred Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.

Jobot is an Equal Opportunity Employer.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.

Jobot also prohibits harassment of applicants or employees based on any of these protected categories.

It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Sometimes Jobot is required to perform background checks with your authorization.

Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.

Frequency varies for text messages.

Message and data rates may apply.

Carriers are not liable for delayed or undelivered messages.

You can reply STOP to cancel and HELP for help.

You can access our privacy policy here: /privacy-policy
Not Specified
Residential Youth Caregiver - Relocation to Hershey, PA Required
Salary not disclosed
Oxnard, CA 2 weeks ago

Description:

Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students.

MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential.

Responsibilities include:


  • Providing daily supervision and mentorship
  • Managing household routines and student schedules
  • Administering medications and ensuring student wellness
  • Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students
  • Leading daily devotions and accompanying students to Sunday Chapel
  • Overseeing budgeting and household reporting

Upon hire, Flex Houseparents initially support various student homes and follow a working schedule of nine consecutive days on duty, followed by three days off. On weekdays, houseparents have unscheduled time while students are in school. Flex Houseparents eventually transition into a Placed Houseparent role, where they live and work with the same group of students in their own student home.

Benefits include:


  • Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more)
  • Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings
  • Relocation assistance and paid training provided

  • Paid time off provided at designated times throughout the year
Qualifications:

Qualifications include:


  • Experience working or volunteering with youth
  • This is a two-person role for couples legally married for at least two years
  • Both spouses must be age 27 or older
  • No more than three dependent children may reside in the student home
  • Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty
  • Pet limitations: only fish and one dog of approved breeds allowed
  • Valid U.S. driver’s license and ability to become certified to drive student home vans
  • Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited)
  • High school diploma or GED required
  • Ability to lift to 50 lbs.

  • Demonstrated integrity and professionalism; MHS staff serve as role models for students

This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit

permanent
Side Hustle Specialist (Evenings & Weekends)
$300-$1,200 per month (part-time) - monthly

We’re seeking dependable individuals who want to build a side income alongside their full-time work. This role offers flexible tasks you can perform outside your regular job hours. You’ll be given structured guidance and tools to identify side hustles that complement your main job, without conflict or burnout.

Responsibilities:

  • Work through curated side-hustle ideas and evaluate which suit your skills and schedule

  • Test and implement methods to generate extra income (e.g. remote tasks, micro-projects)

  • Track your time and earnings; maintain simple reports

  • Adjust your workflow and focus on the side hustles that deliver the best return

Requirements:

  • Must have a full-time job already (or other main commitment)

  • Reliable internet access and a device (laptop, tablet or smartphone)

  • Basic organization skills and ability to work independently

  • Willingness to learn and experiment

Preferred Qualities:

  • Self-motivated

  • Good at managing time

  • Comfortable trying new things

  • Able to commit a few hours each week

Benefits:

  • Work on your own schedule (evenings/weekends)

  • Low risk; minimal overhead

  • Opportunity to scale income over time

  • Support and guidance provided

temporary
Telecom & Contact Center Engineering Sr. Analyst (Hybrid)
Salary not disclosed

*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*

Position Summary:

Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.

As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.

You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.

Responsibilities include but not limited to:

  • Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms

  • Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions

Qualifications:

  • Hands-on experience engineering and supporting cloud-based telephony or contact center platforms

  • Strong understanding of VoIP technologies, SIP, and call routing concepts

  • RingCentral and RingCentral Contact Center engineering

  • NiCE inContact / CXone administration and development

  • Cyara or similar modern telephony orchestration platforms

  • Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments

  • Solid knowledge of networking concepts related to real-time communications

Preferred Qualifications:

  • Supporting remote contact center agents

  • REST API integrations and automation

  • Scripting using PowerShell or Python

  • Workforce management, call recording, or speech technologies

  • PSTN carrier and phone number lifecycle management

This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.

#LI-Hybrid**This position willhave a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$72,000.00 - $134,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Test Engineering Tech II - 401 Shift Days - Flexible Shift Options for Work-Life Balance (FLORENCE)
Salary not disclosed
JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Work from anywhere with rare travel demands (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer – Infrastructure Design (Remote) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Principal Mechanical Integration Engineer
Mechanical Design Engineering 
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
permanent
SAP Engineer - Licensing and Compensation (Hybrid)
🏢 Securian
Salary not disclosed
Saint Paul, MN, Hybrid 3 days ago

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

  • Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

  • Perform analysis, design, development, and integration on medium to high level complexity assignments.

  • Develop and support automation capabilities through webservices and APIs.

  • Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

  • Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

  • Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

  • Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

  • Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

  • Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

  • 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

  • Familiarity with SAP ICM/APM and ALM modules.

  • Strong problem-solving skills and ability to manage multiple priorities.

  • Excellent communication skills and ability to work cross-functionally.

  • Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

  • SAP Certification in relevant Modules

  • Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

  • Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

  • Ability to work independently and as part of a collaborative team.

  • Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$72,000.00 - $134,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Principal Thermal Rack Engineer (Rack Integration Solutions) - Hybrid Work Flexibility (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
temporary
Senior Engineer, Global Services - Hybrid
Salary not disclosed
Medina, Hybrid 6 days ago
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.

Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.

Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.

Visit us at to learn more and view our open positions.

Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.

must have the ability to travel Only W2 candidates are eligible for this position.

Third-party or C2C candidates will not be considered.

Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.

Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.

Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.

Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.

The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.

Need not have any tools/ software experience, CAD would be a plus.

Medical background will be a plus any regulatory background will be good.

Someone who was worked with Engineers, multitasking will be a great fit.

Ambiguity, adapt, multi-task and works with lead engineer in projects.

Support the team of Product core and represent service operations and supply chain.

Will be in charge of Service change implementation.

Focuses on design changes, process changes.

Collaborates with Service Process, Engineers, Technicians, impact of changes.

Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.

Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.

2.

Supports new product platform releases.

Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.

3.

Evaluates / makes recommendations on product releases related to design for serviceability.

Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.

4.

Works closely with design team to select, develop, and implement technologies across all medical device development programs.

5.

Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.

6.

Coordinates information flow between corporate and local/regional teams.

7.

Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.

8.

May represent Technical Services on new product development and/or lifecycle management core teams.

9.

May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.

10.

May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.

Must be well versed in core engineering disciplines (e.g.

mechanical, electrical, software, systems engineering).

2.

Highly motivated self-starter who is able to work with minimal supervision.

3.

Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.

4.

Experience with change control methodologies and configuration management principles is a plus.

5.

Experience with test engineering and/or reliability engineering principles is a plus.

6.

Ability to exercise independent judgment and draw conclusions based on available information.

7.

Good understanding of GMP and quality system requirements.

Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.

Medical device experience or other regulated industry experience preferred.

Experience in the use of Lean Six Sigma tools highly desirable.

About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.

The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.

DivIHN is an equal opportunity employer.

DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.

GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Not Specified
jobs by JobLookup