Engineering Structures Jobs in Orchid Florida Remote
386 positions found
Responsibilities include leading a team of I&T engineers through the product life cycle, from initial requirement analysis for testability to designing and developing test plans and flows.
Additionally, this role involves defining, planning, and implementing strategies for test, verification, validation, qualification, and acceptance testing.
Provide mastery-level system integration and test engineering expertise to a team.
Lead space hardware and software integration and verification testing at acceptance, proto-flight, and qualification levels for all relevant environments (vibration, thermal, vacuum) Develop verification plans, test procedures, and test flows, and lead the execution of test procedures.
Document test results in reports to ensure system requirements are met.
managing the Test Bed and Simulators used during integration and test activities.
Identify and resolve technical issues and anomalies during integration and testing, collaborating with cross-functional teams to address discrepancies.
Collaborate with cross-discipline teams (systems, mechanical, structural, thermal, power, optical, RF, electrical) in development, integration, and execution.
Represent Space Integration & Test engineering during major system level design reviews including System Requirements Review (SRR), Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), and Test Readiness Reviews (TRR), and Pre-Shipment Review (PSR) Qualifications: Bachelor’s Degree and a minimum of 12 years of engineering experience.
Graduate Degree and a minimum of 10 years of engineering experience.
In lieu of a degree, a minimum of 16 years of engineering experience Experience with system-level space requirements verification, including allocation, testability, flow down, analysis, testing, and demonstration.
Experience with space hardware/software integration, testing, and troubleshooting Experience with Flat Sats and simulators Secret Clearance Preferred Additional Skills: Technical leadership experience in an SI&T role Experience designing Mechanical Ground Support Equipment (MGSE) and/or Electrical Ground Support Equipment (EGSE) for large space vehicles.
Power, Thermal, Communications (Optical or RF), Data Management, Structures, Mechanisms, GNC, Propulsion, Configuration/Packaging, Software, Fault Management, Harness Proficiency with Interface Definition Documents (IDDs) and Interface Control Drawings (ICDs) Expertise in requirements management, traceability, and verification using IBM Rational DOORS and MBSE tools (CAMEO) Experience directly interfacing with customers (both prime contractors and end customers) to resolve technical issues during the development and sell-off of space hardware.
Experience in risk management LI-KB1 LI-KB1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
The PLM Integration and Test Lead designs, develops the overall integration and testing scheme/approach for the new PLM development and then manages the overall integration and testing activates of the PLM team to ensure PLM capabilities function as an element and within the integrated L3Harris system with high quality and reliability for sustained business success.
Essential Functions: Leads the design and development of the Integration and test plan with the PLM Leads Develops and manages overall Test and Integration Plan and leads implementation and tracking of the plan for the PLM DT Drives a Design for Test and Integration mindset in the overall PLM Team Ensures each capability is functionally validated and performance achieved in the integrated system for successful business execution Leads team in the development of efficient and robust test methodologies Organizes use cases and scenarios to test Grades and ranks test and integration activities to enable prioritization based on risk, criticality, etc Leads teams in conducting independent Failure Modes Effects Analysis of IT Vendor designs to identify high risk, high probability modes of failure, prioritize importance and mitigation activities Leads interface between L3Harris functional I&T team execution and IT/contractor developing and setting reporting workflow and expectations for individual capability working groups Manages the troubleshooting interface with IT and vendors Track and monitors and reports functional progress of test and integration Manages, tracks and reports functional integration and test activities status Organizes program and business specific I&T activities Qualifications: Bachelor’s Degree (in Engineering, Computer Science, or related technical field) and minimum 9 years of prior relevant experience.
Graduate Degree and a minimum of 7 years of prior related experience.
In lieu of a degree, minimum of 13 years of prior related experience Experience in large-scale PLM implementation, development, test or migration projects.
Experience with mechanical and electrical engineering design processes, configuration management principles, and product data management.
Experience with a major PLM platform and its integration with major MCAD and ECAD tools.
Preferred Additional Skills: Familiarity with the specific challenges and requirements of the Aerospace & Defense (A&D) industry TS/SCI Clearance LI-KB1 L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
L3Harris Engineering & Program Finance Hiring Event for Cleared Talent in Melbourne, Florida.
Overview: Join our team that's not merely aiming for the stars — we're actively sculpting the future of space, cyber, air, and sea technology! Our expanding teams in Software Engineering, Systems Engineering, Integration and Test, Network Planning, and Program Finance are dedicated to influencing the trajectory of these critical domains.
We engage with every product and service provided, fostering a vibrant and welcoming atmosphere that harnesses problem-solving skills, creativity, and data analytics to confront the industry's most thrilling challenges, all while contributing to the security of our nation.
Date: Wednesday, April 1st Time: 2:00
- 5:30pm Location: Will be provided in invite Please note, this event is not for recent or new college graduates.
Opportunities at L3Harris: Software Engineers Systems Engineers Space Vehicle Engineers Systems, Integration and Test RF Engineers Network Planning Engineers Program Finance Contracts Trade Compliance Qualifications: Minimum of a Bachelor’s degree 3 years experience in your field OR an additional 4 years in lieu of a degree (we have senior level roles as well that require 12 years experienced with a Bachelor’s degree) An active DoD Security Clearance or ability to obtain one which requires US Citizenship and a detailed background investigation Relevant experience within aerospace, defense, or technology industries.
Benefits of Joining L3Harris: Innovative Projects: Contribute to pioneering advancements in space systems technology.
Global Impact: Work on projects with far-reaching global influence.
Professional Development: Thrive in a collaborative workplace that promotes career advancement.
Compensation & Flexibility: Receive robust compensation, flexible work arrangements, and a full spectrum of benefits.
Dedication to Excellence: Join a team dedicated to innovation where your work contributes to the greater good in defense, aerospace, and beyond.
9/80 work schedule: Every other Friday off! Click 'APPLY NOW' to register for this event.
Should we have opportunities that align with your background we’ll send you an invite with details about the event.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
L3Harris Engineering & Program Finance Hiring Event for Cleared Talent in Melbourne, Florida.
Overview: Join our team that's not merely aiming for the stars — we're actively sculpting the future of space, cyber, air, and sea technology! Our expanding teams in Software Engineering, Systems Engineering, Integration and Test, Network Planning, and Program Finance are dedicated to influencing the trajectory of these critical domains.
We engage with every product and service provided, fostering a vibrant and welcoming atmosphere that harnesses problem-solving skills, creativity, and data analytics to confront the industry's most thrilling challenges, all while contributing to the security of our nation.
Date: Wednesday, April 1st Time: 2:00
- 5:30pm Location: Will be provided in invite Please note, this event is not for recent or new college graduates.
Opportunities at L3Harris: Software Engineers Systems Engineers Space Vehicle Engineers Systems, Integration and Test RF Engineers Network Planning Engineers Program Finance Contracts Trade Compliance Qualifications: Minimum of a Bachelor’s degree 3 years experience in your field OR an additional 4 years in lieu of a degree (we have senior level roles as well that require 12 years experienced with a Bachelor’s degree) An active DoD Security Clearance or ability to obtain one which requires US Citizenship and a detailed background investigation Relevant experience within aerospace, defense, or technology industries.
Benefits of Joining L3Harris: Innovative Projects: Contribute to pioneering advancements in space systems technology.
Global Impact: Work on projects with far-reaching global influence.
Professional Development: Thrive in a collaborative workplace that promotes career advancement.
Compensation & Flexibility: Receive robust compensation, flexible work arrangements, and a full spectrum of benefits.
Dedication to Excellence: Join a team dedicated to innovation where your work contributes to the greater good in defense, aerospace, and beyond.
9/80 work schedule: Every other Friday off! Click 'APPLY NOW' to register for this event.
Should we have opportunities that align with your background we’ll send you an invite with details about the event.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.
Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.
L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success.
Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech.
With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
L3Harris Engineering & Program Finance Hiring Event for Cleared Talent in Melbourne, Florida.
Overview: Join our team that's not merely aiming for the stars — we're actively sculpting the future of space, cyber, air, and sea technology! Our expanding teams in Software Engineering, Systems Engineering, Integration and Test, Network Planning, and Program Finance are dedicated to influencing the trajectory of these critical domains.
We engage with every product and service provided, fostering a vibrant and welcoming atmosphere that harnesses problem-solving skills, creativity, and data analytics to confront the industry's most thrilling challenges, all while contributing to the security of our nation.
Date: Wednesday, April 1st Time: 2:00
- 5:30pm Location: Will be provided in invite Please note, this event is not for recent or new college graduates.
Opportunities at L3Harris: Software Engineers Systems Engineers Space Vehicle Engineers Systems, Integration and Test RF Engineers Network Planning Engineers Program Finance Contracts Trade Compliance Qualifications: Minimum of a Bachelor’s degree 3 years experience in your field OR an additional 4 years in lieu of a degree (we have senior level roles as well that require 12 years experienced with a Bachelor’s degree) An active DoD Security Clearance or ability to obtain one which requires US Citizenship and a detailed background investigation Relevant experience within aerospace, defense, or technology industries.
Benefits of Joining L3Harris: Innovative Projects: Contribute to pioneering advancements in space systems technology.
Global Impact: Work on projects with far-reaching global influence.
Professional Development: Thrive in a collaborative workplace that promotes career advancement.
Compensation & Flexibility: Receive robust compensation, flexible work arrangements, and a full spectrum of benefits.
Dedication to Excellence: Join a team dedicated to innovation where your work contributes to the greater good in defense, aerospace, and beyond.
9/80 work schedule: Every other Friday off! Click 'APPLY NOW' to register for this event.
Should we have opportunities that align with your background we’ll send you an invite with details about the event.
L3Harris Technologies is proud to be an Equal Opportunity Employer.
L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.
All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.
L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance.
Security clearances may only be granted to U.S.
citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer.
Please click here for the E-Verify Poster in English or Spanish .
For information regarding your Right To Work, please click here for English or Spanish .
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
