Engineering Structures Jobs in None, NY

The Rockland County Department of Highways, Drainage Division, is seeking a Director of the Drainage Agency. The work is specialized diverse, and complex in nature.

This is administrative and managerial work of a complex nature that involves responsibility for developing and implementing policies and procedures to implement safe, efficient and modern stream maintenance and drainage programs. The work is performed under the general direction of the Superintendent of Highways and in accordance with Federal and New York State applicable laws and regulations and Rockland County objectives and policies. Supervision is exercised over professional and technical employees. Develops policies and procedures with respect to drainage programs and makes recommendations to the Superintendent of Highways regarding same. Arranges for the engineering, construction, improvement, repair and maintenance of County streams, water courses, drainage courses, and tributaries and ensures that services are in compliance with policies and regulations. Oversees the administration of drainage-related capital projects, including but not limited to monitoring funding, supervising contract bid processes, ensuring compliance with regulations and project requirement. Responds to emergencies (e.g. severe flooding) by inspecting and monitoring flooding and related conditions, acting as liaison with County officials and first responders to exchange information and resolve problems, preparing reports regarding flood damage and related conditions in order to obtain New York State and Federal funding. Completes applications and prepares documents to secure New York State Department of Environmental Conservation (DEC) permits, as needed, regarding dam safety, streams, aquatic habitats, wetland programs, etc. Acts as liaison to a variety of governmental agencies and units of government, as needed, including but not limited to the Army Corp of Engineers, the New York State Department of Environmental Conservation, towns and village, etc. Approves plans, specifications and estimates for construction, maintenance and repair of stream watercourses and tributaries. Directs the control of trees, brush and weeds within the bounds of County streams. Plans and directs a program to inform residents about the programs and functions of the Drainage Agency. Oversees the Drainage Agency’s permit application process and ensures compliance with the Rockland County Stream Control Act as it applies to activities within areas under the jurisdiction of the Drainage Agency. Plans and directs a Stream Maintenance program, maintains records and makes reports. Acts for and in place of the Superintendent of Highways with respect to drainage matters, as needed. May provide legal opinions regarding Federal, New York State, and Rockland County laws that pertain to drainage matters. May inventory and purchase machinery, equipment and materials.

Thorough knowledge of New York State Department of Environmental Conservation requirements and regulations, thorough knowledge of general practices and regulations regarding stream maintenance and general construction procedures. Good knowledge of administrative procedures and techniques, especially as they pertain to a comprehensive modern stream maintenance and drainage programs, ability to plan, develop and implement general policies and procedures for a modern and efficient stream and drainage system, including stream maintenance and construction. Ability to establish and maintain cooperative relationships with others, including elected officials and Federal and New York representatives. Have the ability to understand and interpret laws and regulations that pertain to drainage-related matters. Ability to effectively communicate, both orally and in writing Also does related work as required.

Minimum Qualifications:

• A Bachelor’s degree or higher in Civil Engineering, Civil Engineering Technology, Environmental Engineering, or comparable curriculum or;
• A New York State license to practice law and
• Four (4) years of post-degree supervisory, administrative or management experience that substantially involved responsibility for drainage and/or environmental programs and projects (e.g., development of policies and procedures, supervision of staff, enforcement, providing legal opinions and/or litigating related matters, overseeing the implementation of programs and projects, etc.).

Other Requirements and Information:

• Must be a Resident of Rockland County.
• This is a competitive position in Civil Service and reachability on an eligible list following a civil service examination would be a requirement for permanent appointment.

Salary and Benefits:

Salary and benefits are competitive with the public sector market including but not limited to the following:

• $122,000.00 Annual Salary (as of January 1, 2026)
• 40 Hour work week
• Medical, Dental and Vision
• Time off including vacation, personal and holiday time
• New York State Pension eligibility
• Other benefits, including, but not limited to deferred compensation, tuition reimbursement, leadership and other professional development training

How to Apply:

Interested candidates should email a completed Rockland County employment application, to

Click here to access the online application.

Position open until filled.

Job Title: Account Director – Facilities Management

Location: New York City, NY

Salary: Up to $200K per annum + Annual Bonus

About the Role: We are seeking an experienced and dynamic Account Director to oversee a major financial services facilities management account in New York City, NY. The ideal candidate will have a deep understanding of facilities management, technical engineering, and financial management, and will play a key role in ensuring the smooth operation of the client’s facilities.

Key Responsibilities:

• Lead the day-to-day facilities management operations for a key client’s Manhattan site and 6 remote sites across the US including Los Angeles, San Francisco and Washington, DC, ensuring the highest standards of service delivery across all areas of facilities and building maintenance.
• Manage and develop client relationships, acting as the primary point of contact for all facilities-related matters.
• Oversee and manage the facilities team, ensuring efficient and effective delivery of maintenance, health and safety compliance, and site services.
• Provide technical engineering support and guidance to ensure all building systems (HVAC, electrical, plumbing, etc.) are functioning optimally.
• Implement cost-effective strategies to improve the quality of facilities services while ensuring budgetary targets are met.
• Develop and maintain financial reporting, including budgets, forecasts, and cost analysis to drive operational efficiency.
• Monitor and ensure the successful completion of any capital projects, upgrades, or renovations in line with client expectations.
• Ensure compliance with all health, safety, and regulatory requirements across the site.

Qualifications and Experience:

• Extensive experience in facilities management, with a proven track record of managing large-scale operations and delivering exceptional service to clients.
• Strong technical engineering knowledge or understanding of building systems and maintenance operations.
• Financial acumen with the ability to develop and manage budgets, track expenses, and optimize costs.
• Previous experience working in a senior account management or senior-level role, ideally in a complex environment.
• Strong leadership and team management skills, with a demonstrated ability to develop and motivate a diverse team.
• Excellent communication and interpersonal skills, with the ability to work effectively with both internal teams and external stakeholders.

Additional Skills:

• Highly organized with excellent project management abilities.
• Proactive and solution-focused, with the ability to anticipate client needs and act accordingly.
• Ability to manage multiple priorities and work under pressure to meet deadlines.

This is an excellent opportunity to join a global facilities management team and take ownership of a critical account, ensuring a high level of service and operational excellence. If you have the skills and experience we’re looking for, apply today!

• $100-$120k annual base salary
• Highly visible role with direct impact on revenue and market share
• Local travel visiting clients and new prospects
• Collaborate with engineering and operations leaders on advanced technologies
• Amazing Benefits, Company culture, Bagels and Lunch on the company every Friday! Amazing tenure as well.
  
  

• Grow and maintain OEM customer relationships
• Identify and pursue new business through research and industry events
• Generate leads, prepare quotes, and close orders
• Deliver technical presentations and negotiate contracts
• Forecast sales and manage CRM reporting
• Partner cross-functionally to align market needs with engineering solutions
  
  

• Bachelor’s degree in a technical or engineering discipline
• Background in OEM or technical sales environments
• Ability to read schematics and present complex technical concepts
• Proficiency in Microsoft Office and CRM platforms
• Authorized to work in the U.S. and able to travel internationally
  
  

Construction Project Manager

Location: Buffalo, NY

Hire Type: Direct Hire

Pay Range: $75,000 – $100,000 plus bonus

Work Type: Full-time

Work Model: Field

Positional Overview

The Imagine Group is recruiting for a Construction Project Manager on behalf of our client, a leading electrical design, engineering, construction, and maintenance contractor headquartered in Buffalo, NY with a legacy of serving commercial, industrial, institutional, and utility clients. The organization delivers comprehensive power systems, lighting, controls, and infrastructure solutions — from high-voltage substations to low-voltage systems and 24/7 emergency service — supported by in-house expertise in engineering and project execution.

In this role, you will be responsible for overseeing electrical construction projects from pre-construction planning through final completion, ensuring work is delivered on time, within budget, and in accordance with contract specifications. You will coordinate field teams, subcontractors, and clients, manage schedules and financials, and proactively address project risks to drive successful outcomes and maintain strong customer relationships.

Role & Responsibility:

• Build relationships with customers and introduce complete portfolio of company services where appropriate.
• Collaborate with all company divisions when working with new and existing customers to ensure exceptional project delivery.
• Adhere to IBEW rules and regulations and all customer, Local, State and Federal codes and standards.
• Manage and oversee construction project lifecycle to include:
• Contract, Finance, and budget:
• Understanding the full scope of a project based on contract documents and or scope letter.
• Manage customer requests for estimates in a timely manner.
• Manage and track the Change Order process to effectively keep the project moving forward. This includes maintaining the contract value in Foundation is accurate with the work being performed.
• Manage and prepare all invoices per the contract and or the customers’ specific requirements.
• Manage the project budget by tracking (and reviewing weekly) the projects committed costs and actual cost vs estimated costs and estimated cost to complete.
• Setup and review weekly cost codes (based on all projects being over 1000 man\hours).
• Create and manage subcontracts for necessary work to be performed on the project.
• Work collaboratively with the foreman on progress of project to ensure the project is appropriately staffed and field employees have all required tools & equipment to perform their job safely and efficiently.
• Procure materials with the intension of just-in-time delivery; resolve delivery issues and site logistics challenges with safety and efficiency in mind.
• Work in conjunction with other trades on jobsite to meet project objectives.
• When required, manage the submittal approval process to ensure compliance with contract specifications and installation methodology.
• Create and drive a construction schedule that aligns with the owner/construction manager’s schedule.
• Create and manage all subcontracts where labor is required to be performed.
• Create and manage all participation requirements per the project contract.
• Manage the RFI Process.
• Ensure project closeout documents are submitted in a timely manner.

Skills & Experience

• Bachelor’s Degree in a related field (construction or project management, engineering, etc.) preferred
• Five years in the commercial electrical trade preferably running projects as a foreman.
• Field experience coordinating with construction management.
• Extensive knowledge of project scheduling, bids, take-offs, change orders, and contracts.
• Demonstrated ability to develop relationships and assist in winning projects
• Demonstrated ability to run a profitable portfolio.
• Exceptional initiative, execution and communication skills, both oral and written.
• Exceptional analytical, motivational, and leadership skills.
• Journeyman or Master Electrician's license a plus.
• Ability to work in a fast-paced work environment with tight deadlines

About Us:

At Biz2Credit, we are looking for individuals who are ready to join a dynamic and innovative fintech company on a mission to change the lending landscape for small businesses. Our values of Collaboration, Responsibility, Empowerment, Disruption, Innovation, and Trust guide everything we do, and our purpose of helping small businesses succeed drives us forward.

As a company, we believe that with the right tools and support, small business owners can achieve their dreams, and we're here to make that happen. That's why we're dedicated to developing cutting-edge solutions, like our Biz2X platform, a fully configurable SaaS solution that leverages artificial intelligence and machine learning to make lending more efficient, effective, and accessible.

But we're more than just another FinTech company. We're a team of individuals who bring their unique personalities, backgrounds, and experiences to work every day. We believe that diversity makes us stronger, and that's why we value a culture that is inclusive and supportive. We're looking for people who are excited about the opportunity to make a difference, who want to work in an environment that is both challenging and fun, and who are eager to bring their whole selves to work.

So, if you're someone who is eager to join a company that is making a real impact, who values a positive and inclusive workplace culture, and who is ready to be a part of a team that is changing the lending landscape, we want to hear from you. Come join us and be a part of something truly special at Biz2Credit.

About the Role

Biz2Credit is launching a new small-business credit card, and we are hiring a Director of Credit Card Risk Strategy to build and scale the risk engine that powers the product. This role sits within the Risk organization and focuses on designing and executing the fraud and credit strategies required to safely grow a new card portfolio.

You will own fraud and credit risk strategy across the full lifecycle, partner with Data Science on model development, work with product and engineering to implement rules and logic, and collaborate with vendors who support fraud detection, identity verification, and credit decisioning. This is a hands-on, analytics-driven role for someone who has built or scaled card risk systems before.

Key Responsibilities

Fraud Risk Strategy & Analytics

• Develop and manage fraud strategies across the full credit card lifecycle: KYC, KYB, onboarding, transaction monitoring, disputes, and chargebacks
• Build and optimize fraud rules, signals, and decisioning logic
• Partner with Data Science to develop or enhance fraud models
• Monitor fraud KPIs, emerging patterns, and loss trends to adjust strategy
• Work with fraud vendors and platforms to implement rules, workflows, and detection capabilities

Credit Risk Strategy & Analytics

• Own credit line assignment, credit line increases (CLI), credit line decreases (CLD), and ongoing credit monitoring
• Develop and refine credit risk segmentation, cutoffs, and exposure strategies
• Partner with Data Science online assignment models and credit risk models
• Build dashboards and analytics to track credit performance, delinquencies, and portfolio trends
• Continuously optimize credit policies to balance growth and risk

Card Program Buildout & Scaling

• Contribute to building the fraud and credit risk foundation for a new credit card program
• Support scaling of the portfolio through iterative strategy, analytics, and model improvements
• Ensure risk systems, rules, and logic are implemented correctly across product, engineering, and vendor platforms

Cross‑Functional Collaboration

• Work closely with product, engineering, operations, and external vendors to launch and scale long duration programs
• Translate risk strategy into technical requirements for implementation
• Partner with compliance teams as needed; deep expertise not required, but familiarity with Reg Z, Reg B, FCRA, and UDAAP is helpful

Qualifications

• 5–10+ years of experience in credit card fraud risk, credit risk, risk analytics, or risk modeling
• Hands‑on experience with fraud lifecycle management: KYC, KYB, onboarding, transaction monitoring, disputes, chargebacks
• Experience with credit line strategy: limit assignment, CLI, CLD, and credit monitoring
• Strong analytics background; proficiency in SQL required, Python preferred
• Experience working with fraud and/or credit risk vendors and platforms (e.g., decision engines, fraud tools, KYC/KYB providers)
• Experience building or scaling risk strategies for a credit card program
• Ability to work cross functionally with product, engineering, data science, and vendors
• Familiarity with compliance requirements for credit cards; ability to partner with compliance teams

Who Thrives in This Role

• Someone who has built or scaled a credit card risk engine
• A fraud + credit strategist who is equally comfortable with rules, analytics, and models
• A hands-on operator who can design strategy and also dig into SQL
• Someone who enjoys cross-functional execution and long-term program building
• A risk expert who wants to shape the foundation of a new card product

About the Role

We are seeking a detail-oriented CAD Drafter to support our engineering and manufacturing teams by producing accurate technical drawings for fabrication and assembly. This role focuses on translating engineer-provided designs, sketches, and specifications into clear, production-ready drawings used on the shop floor.

This is an ideal role for early-career drafters or technically minded professionals looking to grow in an industrial manufacturing environment.

Key Responsibilities

Drafting & Documentation

• Create and revise 2D and basic 3D CAD drawings for mechanical components, assemblies, and layouts
• Convert redlines, sketches, and engineer markups into accurate CAD drawings
• Maintain drawing accuracy, dimensions, tolerances, and bill of material references
• Update existing drawings based on engineering changes or manufacturing feedback

Engineering Support

• Work closely with engineers, designers, and manufacturing teams to ensure drawings meet production needs
• Assist with drawing organization, revision control, and file management
• Help prepare documentation packages for fabrication, welding, machining, or assembly

Quality & Standards

• Follow internal drafting standards, title blocks, and naming conventions
• Ensure drawings comply with basic GD&T, ANSI, and company design standards
• Support quality checks by correcting drawing errors and inconsistencies

Required Qualifications

• 1–3 years of CAD drafting experience or relevant technical education/training
• Proficiency in AutoCAD and/or SolidWorks (2D required, 3D preferred)
• Ability to read and interpret basic engineering drawings and specifications
• Strong attention to detail and accuracy
• Comfortable working in a fast-paced manufacturing environment

Preferred Qualifications

• Experience supporting fabrication, welding, machining, or industrial manufacturing
• Familiarity with:
• Basic GD&T
• Bill of Materials (BOMs)
• Revision control and drawing change processes
• Associate degree, technical certificate, or coursework in drafting, engineering, or CAD design

What Success Looks Like

• Drawings are clear, accurate, and ready for fabrication with minimal rework
• Engineering changes are incorporated quickly and correctly
• Strong collaboration with engineers and shop personnel
• Consistent adherence to drafting standards and deadlines

Join the team leading the next evolution of virtual care.

At Teladoc Health, you are empowered to bring your true self to work while helping millions of people live their healthiest lives.

Here you will be part of a high-performance culture where colleagues embrace challenges, drive transformative solutions, and create opportunities for growth. Together, we're transforming how better health happens.

Summary of Position

The Principal AI Security Engineer is a senior technical leader on the AI Security team, responsible for designing, building, and operating security controls for generative AI and Machine Learning (ML) systems across their full lifecycle: data, training, deployment, and runtime.

This role is deeply hands-on: you will work directly with data science, MLOps, platform, devops and application teams to secure LLMs, RAG systems, AI agents, and AI-enabled products. You will also lead the intake and review process for AI use cases, helping the organization adopt AI safely and at scale in a highly regulated environment.

The ideal candidate combines:

* Strong security engineering and cloud architecture experience

* Deep, current familiarity with modern AI/LLM tooling and practices

* Familiar and can cover basic coding within the AI tooling space (python, others)

* The ability to communicate clearly with senior leadership and influence enterprise-wide strategy

Essential Duties and Responsibilities

Secure AI / ML platforms and workloads

* Lead security architecture and threat modeling for AI/ML systems, including LLMs, RAG pipelines, agents, and AI-powered applications.

* Design and implement security controls as code (services, libraries, infrastructure-as-code, policy-as-code) for AI/ML platforms and workloads.

* Lead and help setup the basic infrastructure needed to safely rollout AI - MCPs, LLMs, pipelines, Test harness for AI (ie: harmbench), intake automation.

* Partner with data science and MLOps teams to harden:

• Data ingestion and labeling
• Training and fine-tuning pipelines
• Model registries and deployment workflows
• Inference APIs, agents, and integrations

* Define and champion secure reference architectures and patterns for common AI use cases and focus on composable architecture.

AI use case intake & governance

* Design, implement, and continuously improve the intake, triage, and review process for AI/ML and generative AI use cases across the organization.

* Build and automate self-service workflows (e.g., request forms, risk questionnaires, routing, approvals) that balance speed of delivery with security, privacy, and compliance with a focus on risk scoring and scorecards.

* Define risk-based criteria for AI use case approval, including data sensitivity, model and vendor selection, integration patterns, and control requirements; this will involve in re-mapping the complete end to end lifecycle.

* Review proposed AI solutions from concept through deployment, providing clear, actionable guidance to product and engineering teams.

* Maintain visibility into the AI use case portfolio and risk posture, and provide regular reporting to leadership and governance bodies.

Monitoring, detection & assurance

* Establish and maintain monitoring and detection for AI-specific threats, such as:

• Prompt injection and jailbreak attempts
• Data exfiltration and sensitive data exposure
• Misuse or abuse of AI tools and agents
• Anomalous model or pipeline behavior

* Integrate AI/ML systems with existing logging, SIEM, and incident response processes.

* Lead or participate in AI-focused security assessments, red-teaming, and adversarial testing; drive remediation and verification.

Strategy, leadership & enablement

* Help define and evolve the organization's AI security strategy, standards, and roadmap in partnership with Security, Engineering, Data, Legal, Privacy, and Risk.

* Translate global privacy, data sovereignty, and regulatory requirements into practical technical controls for AI workloads across multiple cloud environments.

* Prepare and deliver executive-ready briefings and narratives on AI security risks, controls, and progress.

* Mentor other engineers and serve as THE internal subject matter expert on AI/ML security, generative AI, and LLM-based systems.

Qualifications Expected for Position

• 7+ years of experience in information security, security engineering, or related fields, including significant time building and securing production systems.
• 3+ years of hands-on experience with AI/ML technologies (such as LLMs, RAG, model training/fine-tuning, MLOps, or AI-powered products), including implementation of security controls or guardrails for these systems.
• Strong programming skills in one or more relevant languages (e.g., Python, TypeScript/JavaScript, Go, or similar), with a track record of contributing to production-grade tools, services, or libraries.
• Deep understanding of cloud security architecture and controls on at least one major cloud platform (AWS, Azure, or GCP), including identity, networking, secrets management, data protection, logging, and monitoring.
• Experience designing and implementing controls in a highly regulated environment; healthcare or financial services preferred.
• Demonstrated ability to lead complex technical initiatives across multiple teams, from problem definition through design, implementation, and adoption.
• Proven ability to communicate complex technical and risk topics clearly to both engineering teams and senior leadership.

Preferred Qualifications:

* Practical experience securing LLM- and genAI-based systems, such as:

• RAG architectures backed by internal data
• AI assistants, copilots, or agents integrated with enterprise tools
• Fine-tuned models and model hosting platforms

* Experience with AI IDE tools

• cursor, windsurfer, others
• Knows the security problems and has practical solutions that balances innovation with innovation.

* Familiarity with AI/ML frameworks and ecosystems (e.g., TensorFlow, PyTorch, Scikit-learn) and/or modern LLM development stacks and IDEs (e.g., API-based LLMs, self-hosted models, AI-enhanced coding tools).

* Experience with:

• Security for data pipelines, feature stores, and model registries
• Detection engineering or SIEM tuning for AI-related events
• Red-teaming or adversarial testing of AI systems

* Evidence of ongoing engagement with AI and security (such as side projects, open-source contributions, lab environments, publications, or conference talks).

* Familiarity with emerging AI security and safety standards and forward-looking industry guidance and horizon reports.

* Relevant certifications (e.g., cloud security, security engineering, or governance) are a plus.

* Strong analytical and problem-solving skills, with the ability to operate effectively in a fast-evolving technical and regulatory landscape.

* High level of integrity and ethical conduct.

This role is a fit if you:

* Regularly build, break, or secure AI/ML or LLM-based systems in your day-to-day work or personal projects.

* Are comfortable reading and writing code, experimenting with new AI tools, and wiring them into real systems.

* Enjoy turning ambiguous AI ideas and risks into concrete architectures, controls, and automation.

* Can move fluidly between deep technical discussions and concise, executive-level explanations.

This role is not a fit if you:

* Prefer to focus solely on policy, governance, or vendor assessments without hands-on technical work.

* Do not actively engage with current AI/LLM tooling, research, and emerging practices.

* "Describe a specific LLM or AI/ML system you have secured. What were the main risks and what controls did you implement?"

* "What AI tools, libraries, or environments do you actively use or experiment with today (work or personal), and for what?"

* "What do you see as the most important AI security or safety developments on the horizon over the next few years, and why?"

The base salary range for this position is$180,000 - $190,000. In addition to a base salary, this position is eligible for a performance bonus and benefits (subject to eligibility requirements) listed here: Teladoc Health Benefits 2026.Total compensation is based on several factors including, but not limited to, type of position, location, education level, work experience, and certifications.This information is applicable for all full-time positions.

We follow a Flexible Vacation Policy, intended for rest, relaxation, and personal time. All time off must be approved by your manager prior to use. You will also receive 80 hours of Paid Sick, Safe, and Caregiver Leave annually. This applies to full-time positions only. If you are applying for a part-time role, your recruiter can provide additional details.

As part of our hiring process, we verify identity and credentials, conduct interviews (live or video), and screen for fraud or misrepresentation. Applicants who falsify information will be disqualified.

Teladoc Health will not sponsor or transfer employment work visas for this position. Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.

Why join Teladoc Health?

• Teladoc Health is transforming how better health happens. Learn how when you join us in pursuit of our impactful mission.

• Chart your career path with meaningful opportunities that empower you to grow, lead, and make a difference.

• Join a multi-faceted community that celebrates each colleague's unique perspective and is focused on continually improving, each and every day.

• Contribute to an innovative culture where fresh ideas are valued as we increase access to care in new ways.

• Enjoy an inclusive benefits program centered around you and your family, with tailored programs that address your unique needs.

• Explore candidate resources with tips and tricks from Teladoc Health recruiters and learn more about our company culture by exploring #TeamTeladocHealth on LinkedIn.

As an Equal Opportunity Employer, we never have and never will discriminate against any job candidate or employee due to age, race, religion, color, ethnicity, national origin, gender, gender identity/expression, sexual orientation, membership in an employee organization, medical condition, family history, genetic information, veteran status, marital status, parental status, or pregnancy). In our innovative and inclusive workplace, we prohibit discrimination and harassment of any kind.

Teladoc Health respects your privacy and is committed to maintaining the confidentiality and security of your personal information. In furtherance of your employment relationship with Teladoc Health, we collect personal information responsibly and in accordance with applicable data privacy laws, including but not limited to, the California Consumer Privacy Act (CCPA). Personal information is defined as: Any information or set of information relating to you, including (a) all information that identifies you or could reasonably be used to identify you, and (b) all information that any applicable law treats as personal information. Teladoc Health's Notice of Privacy Practices for U.S. Employees' Personal information is available at this link.

We areseekingan experienced and forward-thinkingSolution Architect - Data Engineeringto lead the design and implementation of scalable, secure, and high-performance data solutions. The ideal candidate will have deep expertise withPython and SQL, experience with data warehouses (Snowflake or something similar), a strong command ofengineering best practices(includinglinters and code formatters, project organization, and managing environments), and practical experience buildingCI/CD pipelinesto ensure robust, automated delivery of data pipelines and services.

• 
  
• Architect Scalable Data Solutions
  Design and implement end-to-end data engineering architectures that are scalable, maintainable, and performant across batch and real-time processing systems.
  

• 
  
• Engineering Leadership
  Lead by example with high-quality Python code,utilizinglinters (e.g.,pylint,flake8,black) and enforcing code cleanliness, readability, and best practices across teams.
  

• 
  
• CI/CD Pipeline Development
  Build, manage, and optimize CI/CD pipelines using tools such asGitHub Actions,GitLab CI,CircleCI, orJenkinsto automate testing, code quality checks, and deployment of data engineering components.
  

• 
  
• Data Governance & Quality
  Establish data validation, logging, and monitoring strategies to ensure data integrity and reliability at scale.
  

• 
  
• Collaborate Cross-Functionally
  Work closely with data scientists, software engineers, DevOps, and business stakeholders to translate requirements into technical solutions and ensure alignment with overall enterprise architecture.
  

• 
  
• Mentorship & Code Reviews
  Provide guidance to junior developers, lead technical reviews, and enforce clean coding standards throughout the data engineering team.
  

• 
  
• 7+ years of experience in software or data engineering, with 3+ years in an architectural or technical leadership role.
  

• 
  
• Expert-levelproficiencyinPython and SQL, with a deep understanding of best practices, performance tuning, and maintainable code patterns.
  

• 
  
• Proven experience withlinters,formatters, and other static analysis tools to ensure code quality and compliance.
  

• 
  
• Hands-on experience designing and implementingCI/CD pipelinesfor data pipelines, APIs, and other backend services.
  

• 
  
• Solid knowledge of modern data platforms and technologies (e.g., Spark, Airflow,dbt, Kafka, Snowflake,BigQuery, etc.).
  

• 
  
• Strong understanding of software engineering practices such as version control, testing, and continuous integration.
  

• 
  
• Experience working in cloud environments (AWS, GCP, or Azure).
  
• Familiarity with Infrastructure as Code (IaC) tools like Terraform or CloudFormation.
  
• Understanding of security, compliance, and governance in data pipelines.
  
• Excellent communication and documentation skills.
  
• Strong leadership presence with the ability to mentor and influence teams.
  
• Problem-solver with a focus on delivering value and simplicity through technology.
  

We offer a Total Rewards package that includes medical and dental coverage, 401(k) plans, flex spending, life insurance, disability, employee discount program, employee stock purchase program and paid family benefits to support you and your family.The salary range for this position is posted below. Where an employee or prospective employee is paid within this range will depend on, among other factors, actual ranges for current/former employees in the subject position, market considerations, budgetary considerations, tenure and standing with the Company (applicable to current employees), as well as the employee's/applicant's skill set, level of experience, and qualifications.

It is the policy of our company to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, ethnicity, gender, age, religion, creed, national origin, sexual orientation, gender identity, marital status, citizenship, genetic information, veteran status, disability, or any other basis prohibited by applicable federal, state, or local law.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The employer will make reasonable accommodations in compliance with the American with Disabilities Act of 1990. The job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and other job functions are subject to modification. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions.

For applicants to jobs in the United States: In compliance with the current Americans with Disabilities Act and state and local laws, if you have a disability and would like to request an accommodation to apply for a position with our company, please email .

Mechanical Design Engineer - Complex Custom Equipment

Company Description

Our client specializes in manufacturing industrial machinery and equipment for customers in a variety of sectors. They are looking for a Mechanical Design Engineer at their site near Buffalo, NY. This is an onsite position that is involved with the development, design and complete engineering definition of products for fabrication in conjunction with sales proposals and customer input, satisfying customer needs.

This is an excellent opportunity to join a client who are going through an exciting growth period, offering an excellent culture and long-term progression.

The Role

The Mechanical Design Engineer will oversee knowledge of the project specific engineering schedule, and also mitigate potential issue with the schedule and any conflicts or delays to the supervisor.

The role will also require you to read and interpret Process and Instrumentation Diagrams, participate in project kick-off meetings, have a complete understanding of project specifications and customer expectations.

Other responsibilities include understanding and knowing how to apply common codes and standards, working with Project Engineers in a team environment to create conceptual designs to support sales and detailed designs, and managing multiple projects and balancing requirements to keep all the projects on schedule.

Requirements

• Strong Mechanical Design experience in a full time role within a similar industry sector.
• Previous experience of working within a manufacturing floor and exposed to design work.
• Bachelor's degree in Mechanical Engineering from an accredited university.
• Experience with 3D modelling and 2D drafting, including experience with Autodesk Inventor design software and parametric modelling techniques.
• Experience in designing complex custom equipment highly desirable.

This role is paying an excellent basic salary in addition to a generous benefits package.

Scope of Job
PowerFlex, an EDF power solutions company, is a leading national provider of intelligent onsite energy solutions that support cost-effective and low-carbon electrification and transportation. We deliver integrated solar, storage, EV charging, and microgrid systems, to businesses and organizations. As a single full-service provider, PowerFlex customizes clean technology solutions to help clients achieve their energy and sustainability goals. Through the comprehensive PowerFlex X platform, based on proprietary technology, PowerFlex leverages patented smart software to control, monitor, and optimize a client's distributed energy resources to reduce cost and maximize return on investment. Our technology is deployed at scale to prominent commercial customers such as Adobe, DHL, Prologis, Target, and municipalities such as County of LA. PowerFlex is a top 5 provider in each of Commercial Solar, Storage and EV Charging in the US.

The Interconnection Specialistis responsible formanaging the end-to-end utility interconnection process for commercial and industrial (C&I) solar and battery energy storage projects. Theobjectiveof this role is to drive the interconnection process frominitialsubmission to signed agreement, meeting all schedulemilestonesand providing consistent status updates to internal stakeholders. The Interconnection Specialist mitigates project risk,optimizestimelines for utility interconnection approval, and ensures that distributed energy resources are successfully integrated into the electrical grid.

Location
This role is open to be a hybrid role out of one of our offices (Mountain View, CA,San Diego, CA orLos Angeles, CA. or New York City, NY)

Responsibilities

• Coordinate utility feedback and deficiency responses to progress interconnection applications through utility studies nationally.
• Ensureall interconnection submissions areaccurate, complete, andtimely.
• Manage relationships with third-party engineering vendor partners to oversee the creation of interconnection drawings, single-line diagrams, and technical exhibits.
• Serve as the primary point of contact for utility representatives to negotiate study timelines, resolve technical discrepancies, andexpeditethe approval process.
• Proactively develop and grow strategic relationships with utility representatives and engineering departments to improve communication channels andexpediteproject reviews.
• Maintain an up-to-date knowledge base of utility tariffs, interconnection rules, and net metering policies across variousjurisdictionsto support project feasibility assessments.
• Facilitate project-specific review meetings with utility representatives, developmentengineersand project developers to review results and options to move project forward
• Facilitate regular status meetings with development engineers and project developers to provide visibility into interconnection milestones and potential bottlenecks.
• Ensure all final approved utility documentation and correspondence are organized and archived within the project management system for a clean transition to the Execution team.
• Collaborate with Business Development Analysts and Project Development teams to evaluate new utility markets, providing critical research on interconnection timelines, estimated costs, and application processes.
• Collaborate withPowerFlex'sPolicy Team to escalate issues and file complaints as needed

Qualifications
Education/Experience

• Bachelor's degree in a related field or equivalent practical experiencerequired; B.S. preferred
• 2-4 years of relevant experience

Skills/Knowledge/Abilities

• Project Management: Strong organizational skills with the ability to manage a high volume of projects simultaneously across different utilities and stages of development.
• Communication: Exceptional negotiation and relationship-building skills, witha track recordof successfully navigating utility bureaucracies to resolve technical or administrative bottlenecks. The Interconnection Specialist will alsobe responsible forcoordinating with several internal teams to drive project success.
• Vendor Management:Demonstratedability to manage third-party engineering consultants, ensuring deliverables meet strict technical standards and project deadlines.
• Regulatory Expertise:Understanding ofutility tariffs such as California Rule 21 (or equivalent state-specific interconnection rules).
• Market Research: Ability to analyze and synthesize utility manuals andstatepolicies to help guide the business development team in new geographic markets.
• Software Skills:Proficiencyin project management software (e.g., Salesforce, Smartsheet, or Procore).

Compensation
The pay range for this position is $90,360 to $110,440 annually. Title and compensation will be determined based on experience and may align to either the Project Developer or Senior Project Developer level. This position is eligible for PowerFlex's comprehensive Health and Welfare plans including but not limited to medical, dental, vision, 401(k) retirement plan and paid time off. The total compensation for this position may include an annual performance bonus (or other incentive compensation, as applicable). PowerFlex's compensation packages carefully consider a candidate's qualifications, experiences, and education in relation to the position.

Physical Requirements
Remaining in a seated position.Long hours oncomputerkeyboard. Prolonged periods of standing and/or walking.

Working Conditions
Approximately 90% of the time is spent in the office environment,utilizingcomputers (frequent use of MS Word, MS Excel, Outlook, Access, PowerPoint,Publisherand Adobe etc.), telephones, and general office equipment.Possibly 10%of the time is spent traveling to conferences or meetings or field traveling to project sites.

----------------------------------------------------------------------------------------------------------------------

Applicant Certification and Acknowledgment

By submitting this application, you are certifying that all information provided is true and complete to the best of your knowledge. You understand that any false, misleading, or omitted information may disqualify you from consideration for employment or result in termination if already employed. You also release the company from any liability resulting from your failure to provide accurate information.

DEI Statement

Our company-wide approach to diversity, equity and inclusion is focused on our workplace, community and business outcomes. We believe Diversity, Equity & Inclusion (DEI) is a key component to our mission of delivering renewable solutions and leading the transition to a sustainable energy future. As such, we strive to become a workplace that is diverse, equitable, and inclusive. Our aspiration is to build a culture of belonging and accountability by creating opportunities for growth and continuous learning to ensure progress.

EEO Statement

PowerFlex is committed to building a diverse and inclusive workplace. We are a proud Equal Opportunity Employer and prohibit discrimination based on age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions), and sexual orientation.

Privacy Notice to California Job Applicants

For information on Privacy Notice to California Job Applicants, click here.

Privacy Policy

PowerFlex is committed to protecting the privacy of your personally identifiable information, for more information click here.

Special Accommodation Language

If you require assistance or accommodation while seeking employment with PowerFlex, please contact Human Resources at or . Please note that these communication alternatives are for accommodation requests and not for general employment inquiries.

GEICO is seeking a visionary and strategic HR 1st Line of Defense Control/Risk Director to drive risk management and controls across our Human Resources (HR) functions. This high-impact role is designed for an initiative-taking leader who excels in partnership, thrives in collaborative environments, and brings a strong action-oriented approach. The ideal candidate will champion a process mindsetidentifying enhancement and re-engineering opportunities and leveraging AI and automation to deliver efficiency and effectiveness in key HR activities. Most importantly, this leader will demonstrate a \"can do\" mentality, focused on \"getting to yes\" and breaking down barriers to achieve solutions that align with both risk management objectives and business priorities.

This hybrid role requires on-site presence three days per week at one of GEICO's office locations: Chevy Chase, MD; Chicago, IL; Dallas, TX; or New York, NY.

• Strategic Partnership: Build and nurture strong relationships across HR, business units, and Technology functions to seamlessly integrate risk management into HR initiatives.
• Risk-Based Approach: Understand and prioritize business needs, applying a risk-based mindset to HR processes and controls.
• Process Mindset & Innovation: Advocate for process improvement, actively seeking opportunities for enhancement, re-engineering, and leveraging AI or automation to maximize efficiency and effectiveness.
• Can Do Mentality & Getting to Yes: Approach challenges with optimism, persistence, and resourcefulnessalways striving to find practical solutions and drive consensus that aligns business objectives with risk mitigation.
• Continuous Improvement: Deliver ongoing transformation within HR controls, supporting business growth and compliance through innovative process changes.
• Governance and Compliance: Develop, implement, and maintain policies and procedures that fulfill regulatory requirements and uphold internal standards.
• Team Leadership: Build, guide, and empower a collaborative team focused on designing, monitoring, and remediating HR controls.
• Stakeholder Communication: Clearly and effectively communicate risk events, issues, and process updates to HR leadership, the Audit Committee, and external auditors.
• Training and Awareness: Lead educational sessions for HR staff on risk management, controls, and compliance.

• Bachelor's degree in human resources, business, finance, or a related field; or equivalent relevant experience.
• 8+ years of experience in risk management, internal controls, or compliance, preferably within HR or large, complex organizations.
• Demonstrated partnership and collaboration skills, with the ability to influence stakeholders across diverse functions.
• Initiative-taking, action-oriented mindset with a focus on results and continuous improvement.
• Process-driven, with the ability to propose and implement enhancement opportunities, including re-engineering and AI/automation.
• Excellent written and verbal communication skills, with the ability to distill and present complex issues clearly.
• Strong prioritization skills for thriving in fast-paced, changing environments.

• Master's degree in HR, business, or finance (HR certifications or risk management credentials are a plus).
• Experience with data analysis, process automation, or HR analytics.
• Background in SOX compliance, forensic audit, or control design relating to HR.

This is an exceptional opportunity to join GEICO during a period of transformationleading impactful change in HR risk management, promoting a culture of \"getting to yes,\" and helping shape the future of our organization.

Annual Salary $146,575.00 - $229,600.00. The above annual salary range is a general guideline. Multiple factors are taken into consideration to arrive at the final hourly rate/annual salary to be offered to the selected candidate. Factors include, but are not limited to, the scope and responsibilities of the role, the selected candidate's work experience, education and training, the work location as well as market and business considerations.

At this time, GEICO will not sponsor a new applicant for employment authorization for this position.

The GEICO Pledge:

Great Company: At GEICO, we help our customers through life's twists and turns. Our mission is to protect people when they need it most and we're constantly evolving to stay ahead of their needs.

We're an iconic brand that thrives on innovation, exceeding our customers' expectations and enabling our collective success. From day one, you'll take on exciting challenges that help you grow and collaborate with dynamic teams who want to make a positive impact on people's lives.

Great Careers: We offer a career where you can learn, grow, and thrive through personalized development programs, created with your career and your potential in mind. You'll have access to industry leading training, certification assistance, career mentorship and coaching with supportive leaders at all levels.

Great Culture: We foster an inclusive culture of shared success, rooted in integrity, a bias for action and a winning mindset. Grounded by our core values, we have an established culture of caring, inclusion, and belonging, that values different perspectives. Our teams are led by dynamic, multi-faceted teams led by supportive leaders, driven by performance excellence and unified under a shared purpose.

As part of our culture, we also offer employee engagement and recognition programs that reward the positive impact our work makes on the lives of our customers.

Great Rewards: We offer compensation and benefits built to enhance your physical well-being, mental and emotional health and financial future.

• Comprehensive Total Rewards program that offers personalized coverage tailor-made for you and your family's overall well-being.
• Financial benefits including market-competitive compensation; a 401K savings plan vested from day one that offers a 6% match; performance and recognition-based incentives; and tuition assistance.
• Access to additional benefits like mental healthcare as well as fertility and adoption assistance.
• Supports flexibility- We provide workplace flexibility as well as our GEICO Flex program, which offers the ability to work from anywhere in the US for up to four weeks per year.

The equal employment opportunity policy of the GEICO Companies provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability or genetic information, in compliance with applicable federal, state and local law. GEICO hires and promotes individuals solely on the basis of their qualifications for the job to be filled.

GEICO reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job, unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and associates. GEICO also provides a work environment in which each associate is able to be productive and work to the best of their ability. We do not condone or tolerate an atmosphere of intimidation or harassment. We expect and require the cooperation of all associates in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all associates and applicants.

Job Title: Planner

Location: Hauppauge, NY

Zip Code: 11788

Start Date: Right Away

Pay Rate: $32.83 - $41.04/hr

Shift: 1st Shift, M-F. 8.5 hour day with .5 for lunch

Keywords: #HauppaugeJobs; #HauppaugeJobs;

Benefits:

* Medical / Health Benefits with multiple plan options, Flexible Spending Accounts, Dental and Vision

* 401k

* On the job training / cross-training

* Life Insurance, disability insurance

* Voluntary life insurance for family members available.

* Accident and critical illness insurance optional.

* Scheduled performance reviews

* Referral program

SUMMARY:

Ensures performance to the master production schedule to achieve division objectives for customer service, inventory levels, and configuration management. Plans, prepares, issues, and controls basic production schedules and material requirements to ensure a controlled flow of approved materials timed to meet production requirements.

ESSENTIAL FUNCTIONS:

* Identifies common raw material and component requirements for production from engineering and production specifications. Ensures accurate item master schedules and bill of materials.

* Advises management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials, and services are provided as needed.

* Confirms materials supply is available to meet demand. Prepares work orders or purchase requests for the production or purchase of components or parts to support master production schedule, shop load, and inventory requirements. Coordinates material movements between internal work and storage areas and/or outside processing or suppliers to ensure materials are available when needed.

* Schedules and expedites the movement of parts by means of move orders and/or stock transfers to meet customer shipping dates. Projects hardware availability for assembly build schedule update and development of monthly sales plan objectives.

* Analyzes inventory usage, scrap, and waste, and identifies and quantifies potential problems and causes that would impact the ability to achieve inventory level objectives.

* Advises and assists management in resolving problems concerning over shipments, shortages, engineering changes, and cancellation of orders. Monitors component shortage status. May prepare detailed layouts of component shortage requirements on assigned programs over three-month horizon.

* Maintains configuration control on all open orders and appropriate data files as required by division policies and procedures.

* Coordinates cross-functional activities with Quality Assurance, Manufacturing, Purchasing, Engineering, Inventory Control, Shipping/Receiving, and Contract Administration to ensure a smooth flow of materials through the production process and consistent information regarding status and priorities.

* Recommends changes to improve product or process efficiency and/or reduce cost using continuous improvement principles.

* Maintains professional and technical knowledge by attending educational workshops, reviewing technical and/or trade publications, establishing networks, and/or participating in professional associations.

* Complies with federal, state, and aerospace industry regulations; ensures adherence to requirements and advises management on needed actions. Complies with policies and procedures in Government/Commercial Practices Manual (GPM/CPM).

* Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional or project team responsibilities (e.g., continuous improvement).

QUALIFICATIONS:

* Professional entry level position. Bachelor"s degree in business administration or a related field; may be actively pursuing and is currently studying upper-division core curriculum courses; OR has passed the CPIM national certification basics exam and is committed to achieving the CPIM national certification; OR has completed a certification program in production and inventory control.

* Knowledge of general manufacturing and business operations and key manufacturing resources planning theories and principles including continuous improvement methods (e.g., pull systems, process mapping, JIT).

* General knowledge of legal and regulatory requirements related to production control.

* General knowledge of manufacturing resource planning systems and standard business application software.

* Ability to research and analyze data and develop recommendations or resolve problems by drawing on internal information and referring to prior decisions.

* Ability to work with only general work direction and instructions regarding the scope of assignments and determine priority and order of assignments.

* Ability to read, analyze, and interpret financial reports and policies.

* Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.

* Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and self-development activities.

Position Description

Ryder is hiring an experiencedSenior Level Diesel Technicianin Cheektowaga, NY — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Call Michelle or text “Cheektowaga” to 9 to speak with a recruiter today.

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $35.91 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $2500 at 30 days and $2500 at 90 days
  
  
• Tool Box/Tool Allowance
  
  
• Schedule: Tuesday–Saturday
  
  
• Hours: Second ShiftTuesday - Friday 3:00 pm -11:30 pm – Saturday 7:00 am -3:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, required
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  

ADDITIONAL REQUIREMENTS:

• 
  
• Ability to perform all T3 tasks
  
  
• Must have demonstrated advanced analytical and repair skills in vehicle maintenance
  
  
• Effective interpersonal communication skills
  
  
• Must have basic computer skills: PC, Windows, mouse, etc.
  
  
• Must be able to lift up to 50 pounds
  
  
• Must be available to work shift work/weekends and on call duty as required
  
  
• Prefer ASE Certification in PM, Brakes, A/C, electrical, Electronics or ASE Master Mechanic
  
  
• Required to operate shop computers and diagnostic test equipment proficiently
  
  
• Must have minimum tool requirement
  
  
• Must road test vehicles as necessary
  
  
• Demonstrated ability to coach/mentor/influence others
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete all OEM on-line diagnostic scan tool software courses as required by location fleet mix. (completed within 365days)
  
  
• Complete Instructor led OEM courses as required to support location fleet mix.
  
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Performs complex repairs with minimal (if any) support.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents
  
  
• Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable.
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns.
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Coaches/Mentors other level technicians
  
  
• Advise shop management and other technicians on shop repairs
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 6 days ago (3/13/2026 11:13 AM)

Requisition ID 2

Location (Posting Location) : State/Province NY

Location (Posting Location) : City CHEEKTOWAGA

Location (Posting Location) : Postal Code 14225

Category Technicians/Service Employees6

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000068

Min Pay USD $35.91/Hr.

Max Pay USD $35.91/Hr.

How will you make an impact?
This onsite opportunity is a CNC Programmer role, where the individual will be responsible for developing and maintaining CNC machining processes.

Location/Division Specific Information: Elmira, NY – Engineering Technician II – CNC Programmer. Jabil Elmira is a manufacturing and assembly facility where employees build, test, inspect, and support the production of various products. It includes engineering, quality, materials, and production operations typical of a Jabil manufacturing site.

What will you do?

• Provides technical support for existing processes, including hands-on troubleshooting and failure analysis for milling machines, lathes, EDMs and other CNC equipment.

• Performs programing, qualification, implementation and debugging of CNC programming and functional framework for new and updated machining processes.

• Performs measurement of parts using manual gaging and automated methods.

• Uses data driven decision making for CNC program corrections and improvements.

• Participates in creation of machine requirements for modifications and new builds.

• Participates in machine selection, vendor functional acceptance, site acceptance activities, installation and qualification activities.

• Participates in cutting tool selection, custom cutting tool design, sourcing and testing.

• Participates in tool holder selection, fixture selection, fixture design, sourcing and testing.

• Performs installation, alignment and qualification of machine components including 4th and 5th axis rotary tables, integrated tool setters, touch probes and live tool spindles. 

• Participates in training of Machine Operators on equipment maintenance, tool change, tool setting, tool offsets, data transfers and other routine operational requirements.

• Provides input on creative ways to reduce costs by streamlining processes and systems.

• Acts as a role model for Machine Operators in terms of attitude, machine asset care, troubleshooting, adherence to processes and decision making.

• May perform other duties and responsibilities as assigned.

How will you get here?

Education and Experience

• Associate’s degree preferred; or minimum of two years related experience and/or training

• High School Diploma or GED preferred not required or equivalent experience

• Minimum of 2 years of CNC programming experience.

Knowledge, Skills, Abilities  

• Experience with troubleshooting machine mechanical systems required.
• Experience with technical drawings, geometric dimensioning and tolerancing required.
• Understanding of calculations related to metal cutting (speeds, feeds, rpm, etc.).
• Experience with CNC equipment and related programming software is required. General CNC-ISO programming required (G codes/M codes) – Fanuc and/or Siemens desired
• Working knowledge CAD/CAM software required. Experience with Mastercam and CAD/CAM post processing desire ​
• Strong computer skills including Microsoft Office, specifically Word and Excel.
• Ability to prioritize work-schedules and coordinate multiple tasks.

Additional Job Requirements

• Supports and operates in a proactive, safe, climate-controlled environment

• Mix of sitting and standing with up to 7 hours per day standing.

• Requires lifting and maneuvering fixtures, material and other equipment up to 50 pounds.

• Willing to adjust schedule to support 2nd, 3rd and weekend operations on occasion as needed.

• Standard working hours apply with potential for overtime as needed.

• Readiness to work in conditions that may be warm, cool and/or noisy along with exposure to oil, coolants and other manufacturing related chemicals.

CTG's long-standing Fortune 500 client of over 15 years has a W2 contract assignment for a Project Manager III.

Type: Long-term contract

Job Title: Project Manager III

Location: Fairport, NY

Candidates must be able to commute and work onsite in Fairport, NY

Pay Rate: Based on experience

Work Hours: M-F 8am-5pm

Education: BS in Engineering (Mechanical, Optical, or related field preferred) or Associate's Degree with significant relevant experience.

Description

Lead technical programs and cross-functional teams to deliver on schedule, budget, and scope. Collaborate with internal and external customers, manage program risks, and ensure alignment with strategic goals. Develop business cases, oversee product testing, and communicate progress, risks, and milestones to stakeholders and leadership.

Requirements & Qualifications

• 5–7+ years managing technical programs
• Project management and leadership experience
• Proven ability to lead technical teams and build strong customer relationships
• Cross-functional collaboration across commercial, technical, and technology teams
• Budget, schedule, and resource management
• Skilled in MS Project, Microsoft Office (Excel, Word, PowerPoint)
• Analytical, practical decision-making and problem-solving
• Strong verbal and written communication across organizational levels
• Process discipline and attention to detail

Desired Skills:

• MS degree or higher in engineering/optics
• Experience with program management systems and product transfer to manufacturing
• Familiarity with SAP or similar systems

Additional Information

• No third-party resumes will be accepted
• Drug testing and/or other employment-related inquiries may be conducted
• Applicants with criminal histories considered in compliance with laws
• Must be able to work on a W2 Tax basis (no C2C or third-party vendors)
• CTG is an Equal Employment Opportunity employer and an E-Verify Company

WHAT YOU WILL BE DOING

Develop, document, and maintain manufacturing processes for aerospace and industrial components in a high-mix, low-volume manufacturing environment, with a focus on continuous improvement throughout the process.

Manufacturing/Test Engineers are responsible for cultivating and driving company-wide productivity initiatives, regularly maintaining a healthy pipeline of continuous-improvement ideas, and assisting in developing an effective site strategy and plan. This position supports the assembly and test areas by implementing effective processes, programs, instructions, etc. Additional duties and responsibilities may be required based on organizational needs.

Maximize Productivity

• Continuously drive the development and implementation of productivity projects supporting the strategic direction of the business unit.
• Contribute to the productivity project funnel to achieve annual goals, report progress to team members, and management.
• Drive $400,000 of cost savings a year.
• Lead the team to develop and track relevant operations metrics with the goal of continuous improvement.

Process Automation

• Utilize LabVIEW, PLC programming, robotics, and emerging automation technology to develop automated and semi-automated processes for the assembly and test of aerospace products.
• Collaborate with Design Engineering and Manufacturing Engineering to develop tooling and fixtures in support of improved process efficiency.

Support New Business efforts

• Work with Purchasing and Design Engineering to provide cost estimates and advise on manufacturability for new business opportunities.
• Work with Design Engineering to develop and review Acceptance Test Procedures for new business programs.

Support Ongoing Production

• Develop and document methods and processes for manufactured parts and assemblies through routings, operation sketches, tool sheets, set-up information, and assembly instructions.
• Using lean strategies and methodologies, improve upon inefficient processes, eliminate single-point failure areas, and implement process automation initiatives.
• Work with the Supply Chain and Operations teams to influence site strategy, planning, and execution.
• CNC tooling and fixture design, assembly, and test fixture design.
• Day-to-day support for production operations.

WHAT IS NEEDED FOR THIS ROLE

• Candidates for this role must be a US Person (under export regulations): US Citizens, a refugee/asylee, or a Green Card holder.
• Bachelor’s Degree in an Engineering or Technical discipline and 5+ years’ experience.
• Proficient with CAD Software (Autodesk Inventor preferred).
• Experience in robust fixture and tooling design.
• Proficient in programming (LabVIEW preferred).
• Lean Six Sigma project experience.
• Continuous Improvement.
• Geometric Dimensioning and Tolerancing.
• Automation.
• Product Assembly (hydraulic, electro-hydraulic, and pneumatic components preferred).
• Hydraulic, electro-hydraulic, and pneumatic valve testing.
• Mechanical Troubleshooting.
• Technical Writing (Work Instructions, Policies, and Procedures).
• Good interpersonal communication skills and a team player, ability to direct the work of others.
• Ability to promote and maintain manufacturing process standardization.
• Ability to manage and prioritize multiple projects.

Physical Demands

Individuals may need to sit or stand as needed. May require walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder heights, below the waist or lifting as required to file documents or store materials throughout the workday. Proper lifting techniques required. May include lifting up to 10 pounds for files and computer printouts on occasion. The performance of this position may occasionally require exposure to the manufacturing areas, where, under certain conditions, the use of personal protective equipment, such as safety glasses with side shields and mandatory hearing protection, is required. Primary environment: ambient room temperatures, lighting, and traditional office equipment as found in a typical office environment.

Pecan POS is seeking a skilled and detail-oriented QA Automation Engineer to join our growing engineering team. In this role, you will be responsible for designing, developing, and maintaining automated testing frameworks to ensure the reliability, performance, and scalability of our point-of-sale (POS) platform used by hospitality businesses.

You will collaborate closely with software engineers, product managers, and QA specialists to improve software quality, reduce regression risk, and support continuous integration and delivery. This is an excellent opportunity to contribute to a fast-paced environment where quality and innovation are critical to delivering reliable transaction systems.

• Design, develop, and maintain automated test frameworks for web and API testing

• Create and execute automated regression, integration, and end-to-end tests

• Collaborate with developers and product teams to define test strategies and acceptance criteria

• Identify, document, and track defects through resolution

• Integrate automated tests into CI/CD pipelines to support continuous delivery

• Perform API testing and validate system integrations

• Conduct root cause analysis and contribute to quality improvements

• Maintain test environments and test data for consistent automation execution

• Participate in code reviews and support quality engineering best practices

• Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent experience)

• 3+ years of experience in software testing and automation

• Strong experience with automation tools such as Selenium, Cypress, Playwright, or similar frameworks

• Experience with API testing tools such as Postman or RestAssured

• Familiarity with programming languages such as Java, Python, JavaScript, or C#

• Experience with SQL and database validation

• Understanding of Agile development and the software testing lifecycle

• Experience with version control systems such as Git

• Strong problem-solving and analytical skills

• Experience testing POS systems, fintech platforms, or payment processing systems

• Experience with CI/CD tools such as Jenkins, GitHub Actions, or GitLab CI

• Familiarity with cloud environments (AWS, Azure, or GCP)

• Experience with performance testing tools such as JMeter or k6

• Fully remote work environment

• Competitive salary

• Opportunity to work on mission-critical transaction systems

• Collaborative engineering-focused culture

• Professional development and growth opportunities

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Business Overview

KINESSO is the technology-driven performance marketing agency providing actionable growth for both our agency partners and clients. We turn 'action' into 'outcome' for our clients, leveraging our unique capabilities in optimization, analytics, AI, and experimentation. KINESSO has brought together the collective power of what was formerly Matterkind, Reprise, P3, and Kinesso under one collective entity that will serve as the most powerful delivery engine in the industry. We have extensive offerings spanning across performance marketing and data and technology. Fueled by a deep understanding of consumer behavior, we offer an end-to-end engine of planning and optimization while also delivering on data-driven strategy for social platforms, actionable growth in e-commerce, and creating curated marketplaces specific to each client's function and needs. The company has more than 6,000 employees operating in more than 60 countries. Learn more at Summary

TheLead Product Designer for our Activation product group will lead and scale design strategy across multiple interrelated product lines within our larger suite of industry-leading digital solutions. This role is ideal for a strong design individual contributor who leads by example and is highly collaborative, thriving at the intersection of strategy, innovation, and execution. We're looking for someone who is curious, passionate and ready to grow in bringing a systems-thinking mindset to complex product ecosystems.

As a product design lead, you will execute and advocate for improved quality of design standards across the team, and mentor a team of diverse designers. Our team is highly people-centered - we are looking for someone who fits in with our culture of strong empathy, desire to understand challenges deeply, eats feedback for breakfast and always innovating on how we can better collaborate and align with each other. You will champion user-centered design practices and ensure a cohesive, state-of-the-art experience across products. You look forward to daily close collaboration with other designers, product, engineering, product solutions, marketing, agency and executive stakeholders to align design with business goals and user needs.

You will report into the Director of Product Design, supporting and leading a team designers across UX/UI and creative direction needs. You will be involved in every step of the design process - envisioning, creating, maintaining, and evolving products throughout the product life cycle. You take initiative in growing your researching, wireframing, prototyping, designing, andteam dynamicspractice - leading by example. We are looking for a leadthat is excited about the opportunity to mentor a small team of designers by leading design reviews and deepen our relationships with product owners.

Design Execution and Leadership

• 
  
• Actively design for multiple subproducts in the Activation product group, identifying common themes and identifying best-practice assets, templates and components for the product group
  
• Provide hands-on feedback and creative direction to team members on key projects, particularly those with high strategic importance
  
• Champion human-centered, accessible, inclusive and ethical design practices
  
• Work with the Director of Product Design on developing forward-looking, holistic design vision across multiple product lines
  
• Translate company and product roadmaps into actionable design priorities, ensuring scalability, consistency, and excellence
  
• Advocate for design as a strategic advantage across the Activation product group
  

Cross-Functional Collaboration

• 
  
• Partner with Product, Engineering, and Data teams to ship features that are intuitive, elegant, and impactful
  
• Act as the design voice in business and scrum meetings, providing insight into customer needs, usability, and experience metrics
  
• Work closely with marketing and brand teams to ensure seamless end-to-end user journeys
  

Innovation & User Insights

• 
  
• Stay ahead of industry trends, tools, and technologies to keep the organization on the cutting edge of design excellence
  
• Promote research-driven design, balancing qualitative insights and quantitative data to inform decisions
  
• Bonus: Actively understands and/or uses AI and agentic workflows, bringing insights into both ways of working and product priorities
  

• 
  
• 5+ years in product design (UX/UI)
  
• Expert in Figma
  
• Deep understanding of user-centered design principles, design systems, and dual agile development processes
  
• Strong understanding of atomic design practices and extendingdesign system patterns for new scenarios
  
• Facilitates appropriate research/UX/UI activities needed across the design process
  
• Very organized, strong attention to detail, and high personal standards of design standards and hygiene
  
• Eager to learn new skillsets and try new ways of thinking
  
• A proactive problem solver
  
• Experience mentoring, teaching or instructing junior and peer designers
  
• Passion for coaching, learning from and inspiring small teams of designers in quality of work and design standards
  
• Experience balancing design needs across multiple, interrelated product lines.
  
• Strong portfolio showcasing modern, scalable product experiences for web
  
• Excellent communication, presentation, and stakeholder management skills
  
• Experience working in fast-paced, cross-functional, product-led organizations
  
• A growth mindset and bias toward action
  

• 
  
• Experience with B2B SaaS or complex enterprise platforms, especially for media planning / advertising technology products
  
• Background in design operations, systems thinking, or service design
  
• Fluency in modern design, prototyping and animation tools (Figma, Adobe)
  
• Familiarity with analytics and research platforms (analytics, survey, A/B testing tools)
  
• Experiments with AI platforms and resources (Chat GPT, Runway, Midjourney, Perplexity, Adobe Firefly, etc.)
  
• Complementary design skillsets such as motion graphics, animation, illustration, 3D/4D/XR, machine learning, data visualization
  
• A passion for crafting exceptional product experiences
  
• A strong design point of view-paired with openness to feedback and iteration
  
• Empathy for both users and your cross-functional partners
  
• Experience or interest in adtech, marcomm or ad agencies
  

We offer a Total Rewards package that includes medical and dental coverage, 401(k) plans, flex spending, life insurance, disability, employee discount program, employee stock purchase program and paid family benefits to support you and your family. The salary range for this position is posted below. Where an employee or prospective employee is paid within this range will depend on, among other factors, actual ranges for current/former employees in the subject position, market considerations, budgetary considerations, tenure and standing with the Company (applicable to current employees), as well as the employee's/applicant's skill set, level of experience, and qualifications.

It is the policy of our company to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, ethnicity, gender, age, religion, creed, national origin, sexual orientation, gender identity, marital status, citizenship, genetic information, veteran status, disability, or any other basis prohibited by applicable federal, state, or local law.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The employer will make reasonable accommodations in compliance with the American with Disabilities Act of 1990. The job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and other job functions are subject to modification. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions.

For applicants to jobs in the United States: In compliance with the current Americans with Disabilities Act and state and local laws, if you have a disability and would like to request an accommodation to apply for a position with our company, please .