Engineering Structures Jobs in Morgantown Wv Remote
408 positions found
Perform and analyze clinical laboratory procedures and tests within scope of licensure associated with the preparation of specimens for the anatomical study of their microscopic structure in support of the hospital's mission of patient care.
MINIMUM QUALIFICATIONS:
EDUCATION, CERTIFICATION, AND/OR LICENSURE:
1. Bachelor’s Degree in Histotechnology or related field.
PREFERRED QUALIFICATIONS:
EDUCATION, CERTIFICATION, AND/OR LICENSURE:
1. Histotechnologist Certification (HTL) with the American Society of Clinical Pathologists (ASCP).
2. Qualification in Immunohistochemistry (QIHC) Certification through (ASCP).
EXPERIENCE:
1. One (1) year of laboratory experience in histopathology
CORE DUTIES AND RESPONSIBILITIES: The statements described here are intended to describe the general nature of work being performed by people assigned to this position. They are not intended to be constructed as an all-inclusive list of all responsibilities and duties. Other duties may be assigned.
1. Perform assigned laboratory procedures (e.g., but not limited to, specimen accessioning and processing, inventory, ordering, embedding, tissue cutting and staining, frozen section production, special stains for cellular structures, immunohistochemistry).
2. Prepare tissue and produce microscopic slides using a wide variety of tissue techniques (i.e., fixation, embedding, sectioning and standard staining) to produce accurate reproducible results to meet the needs of patients as requested by the physicians.
3. Operate basic and advanced laboratory equipment/instruments (e.g., cryostats, tissue processors, microtomes, knife sharpeners, slide stainers, embedding centers, distillation system, pH meters, special stain units, IHC instrumentation) consistent with manufacturers’ instruction manuals, and with laboratory SOP. Perform quality assurance, quality control, and required equipment maintenance and troubleshooting procedures, calibration and quality control on instruments.
4. Record all work, (e.g., blocks cut, special stains, slides, immunoperoxidase slides, frozen section slides, immunofluorescent slides, re-cut slides, autopsy and surgical slides, decals, conference, teaching and research),
5. Maintain effective communication with laboratory sections, other hospital departments and public, as necessary to assure dissemination of information and the identification/resolution of problems.
6. Participate in the educational endeavors of the institution to meet the current and future needs of the department. Participate as required, in the education of medical students, residents, PA students, School of Medicine students, MLS and Histotechnology students and technicians.
7. Recognize errors, medical and technical problems and utilize expertise to perform minor and major troubleshooting and appropriate and timely problem resolution. Provide input for development of quality assurance and quality control procedures.
8. Participate in planning and implementing change and maintaining and improving productivity through attendance and participation in tech meetings, projects, and discussions with supervisor.
PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
1. Able to stand and/or sit for long periods of time.
2. Visual acuity must not be impaired. Color differentiation is required.
3. Manual dexterity for instrument operation including microscope.
WORKING ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
1. Noisy environment.
2. Foul or unpleasant odors.
3. Perform procedures and operate instrumentation while wearing protective apparel.
4. May be exposed to virus, disease, and infection from patients and specimens.
SKILLS AND ABILITIES:
1. Able to use a computer keyboard, monitor and mouse
2. Able to communicate verbally, written and electronically with healthcare personnel, families and patients.
3. Able to use numerous types of laboratory equipment.
4. Able to follow complex procedures with minimal guidance.
Additional Job Description:
The successful applicant will join Ruby’s Histology laboratory located within the Health Science Center, working alongside other Histotechnologists under the supervision of the Histology Supervisor and the Anatomic Pathology Manager. This role involves rotating duties and responsibilities within the lab and requires flexibility to work one of two shifts, Monday through Friday: either 5:00 AM to 1:30 PM or 7:30 AM to 4:00 PM. The candidate must adhere to departmental policies and standard operating procedures, possess a general knowledge of Histology practices, and demonstrate strong troubleshooting skills, multitasking ability, and attention to detail in a fast-paced environment.
Our restaurants are staffed with amazing people, and we are looking for more.
The RGM leads the operation of the restaurants and has the overall responsibility for making sure the restaurant meets GPS Hospitality standards of quality, service and cleanliness.
The RGM does not do this alone, as they work with a team of managers.
RGM's bonus on performance, both operationally and financially.
Here are the top five (5) responsibilities of the job: (P&L) Hit Your Sales and Profit Budget Every Period (Systems) Execute Accurate Projections and Schedules While Working All Shifts (Safety) Maintain a Safe and Clean Restaurant (People) Hire and Train Service Obsessed Crew and Shift Leaders (Accounting) Tight Restaurant Controls Job Duties: Ensure team provides outstanding service and satisfied guests Hire, train and coach the restaurant team Utilize GPS Hospitality Systems to run a high-quality restaurant, especially accurate projections and great schedules Implement restaurant controls, especially cash & inventory Frequent contact, both inside and outside the restaurant, with the public, business, and various community organizations to develop and improve the restaurant’s public relations Meet standards for speed of service, food safety and cleanliness Demonstrate strong critical thinking skills Maintain a clean and safe working environment and ensure all equipment is clean and maintained Work all shifts (breakfast, lunch, dinner late night & weekends) each week.
Work at least one (1) full weekend each period Follow all government regulations, employment law, food safety, operations policies and cash policies and implement all accounting controls Supervise in accordance with GPS values, traits and behaviors Communicate effectively with all levels of management about plans, progress and problems Successfully implement all marketing promotions Participate in the implementation of company policies, standards, training and management development Train and develop the capabilities of Assistant Managers and Manager Trainees in the areas of management skills and technical knowledge to provide for growth Job Requirements: 3-5 years of General Manager experience in a restaurant or retail setting High School Diploma or GED preferred Excellent customer service skills Must be able to perform under pressure in a high-volume setting Must have reliable vehicle and valid driver's license Must be at least 18 years of age & authorized to work in the US ServSafe certification preferred About our benefits: We offer a passionate, fun and positive work environment, with a welcoming and supportive team, along with… Strong, performance-based bonus program Regular performance reviews Health & Life Benefits HSA program Generous Paid Time Off benefits Employee Rewards & Recognition Program Career development through structured training programs EEO Statement GPS Hospitality is an Equal Opportunity employer.
All persons shall have the opportunity to be considered for employment without regard to their race, color, religion, creed, national origin, ancestry, lineage or citizenship status, age, disability, gender (including pregnancy, childbirth and other related conditions), sexual orientation, genetic information / characteristics, veteran or military status, marital status or any other characteristic provided by applicable federal, state or local laws.
ADAA GPS Hospitality will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operation of our business, in accordance with applicable federal, state and local law.
If you believe you require such assistance to complete this form or to participate in the interview process, please contact Human Resources at 77
Being good neighbors – helping people, investing in our communities, and making the world a better place – is who we are at State Farm. It is at the core of how we operate and the reason for our success. Come join a #1 team and do some good!
Grow Your Skills, Grow Your Potential
Responsibilities
Join our team as a Property Field Inspection Claim Specialist and showcase your expertise in handling accident and weather-related claims for homeowners, commercial properties, and large losses.
We are looking for an experienced and highly skilled professional to contribute to our dynamic team. You will be the first point of contact to meet with our insureds, explain coverage, estimate damages, and help them through the claims process while providing Remarkable service.
Key Responsibilities:
- Conduct on-site inspections and assessments of property damages for both residential and commercial claims
- Collaborate with policyholders, insurance agents, and other involved parties to gather information and resolve claims efficiently
- May occasionally require interacting with parties who express strong emotions or concerns about ongoing inspections or claim resolutions
- Provide exceptional customer service throughout the claims process, addressing inquiries and concerns promptly and professionally
- Gather necessary evidence, document findings, and prepare detailed reports to support the claims handling process
- Investigate and adjust both personal and commercial property claims with exposures up to $500,000
- Evaluate coverage and policy terms to determine the validity of claims and ensure compliance with local regulations
- Negotiate and settle claims within the authorized limits, considering policy provisions, industry standards, and company guidelines
Where you'll work: This position is located in Morgantown, WV. Competitive candidates should reside within one of the listed zip codes and will service this same territory:
26374 264 26444 265 26519 2652 6541 26542 26543 26544 26546 26547 2656 6719 26726 2675
This is a Remote-Field position in which you will work from home and utilize a mobile office/vehicle for in-person appointments. Although the primary work location is in the field, with a commutable distance from home, there will be opportunities for virtual work to be completed at home. Additionally, there may be occasions where you will be required to travel outside your assigned area to assist in other territories.
Hours of operation are continually evaluated and may change based on business need. Successful candidates are able and willing to work flexible schedules and may be asked to work overtime and/or irregular hours.
Qualifications
Competitive candidates must demonstrate:
- Experience as a Property Field Inspection Claim Specialist in the insurance industry, specifically in property claims
- Strong knowledge of property insurance policies, coverage and claim handling practices
- Knowledge of both residential and commercial building construction
- Familiarity with local regulations and compliance requirements in your assigned territory
- Excellent communication and interpersonal skills to effectively interact with clients, agents, and other stakeholders
- Proven effective communication skills to handle difficult/emotional conversations with a customer-minded focus
- Proven ability to assess damages, estimate repair costs, and negotiate settlements
- Detail-oriented with strong organizational and analytical skills
- Proficient in using claims management software and other relevant tools
- Physical agility to allow for: frequent lifting, carrying and climbing a ladder; ability to navigate roofs at various heights for inspection of both residential and commercial structures; ability to crawl in tight spaces
- May be required to complete Rope and Harness Safety Training.
- A valid driver's license is required
Preferred:
- Bachelor's Degree in a related field or equivalent work experience
- Experience in handling complex or high-value claims
- Construction background
- Water mitigation inspection experience
- Xactimate, XactContents
Additional Details:
- Employees must successfully complete all required training, including applicable licensing exam(s) and background checks required of various state(s).
- State Farm recently implemented new pre-employment assessments. Candidates that have previously taken an assessment may be asked to participate in additional testing
Our Benefits
Because work-life balance is a priority at State Farm, compensation is based on our standard 38:45-hour work week!
- Potential starting salary range: $59,059.65 - $90,000 annually
- Starting salary will be based on skills, background, and experience
- High end of the range limited to applicants with significant relevant experience
- Potential yearly incentive pay up to 15% of base salary
At State Farm, we offer more than just a paycheck. Check out our suite of benefits designed to give you the flexibility you need to take care of you and your family!
- Get Paid! On top of our competitive pay, you are eligible for an annual raise and bonus.
- Stay Well! Focus on you and your family’s health with our robust health and wellbeing programs. State Farm pays most of your healthcare premium, and we offer multiple healthcare plan options, including a high deductible plan. All medical plans provide 100% coverage for in-network preventative care, AND you and your family have access to vision, dental, telemedicine, 24/7 mental health professionals, and much more!
- Develop and Grow! Take advantage of educational benefits like industry leading training programs, top-notch tuition assistance programs, employee resource groups, and mentoring.
- Plan Ahead! Plan for those big moments in life with benefits like fertility/IVF/adoption assistance, college coaching, national discount programs, interactive monthly financial workshops, free financial coaching, and more. You can also start a savings account or consider financing through our State Farm Federal Credit Union!
- Take a Little “You” Time! You will have access to our generous time off policies designed so you can plan around holidays, family events, volunteering, or just to take a relaxing day off. With the opportunity to initially earn up to 20 days annually plus parental leave, paid holidays, celebration day, life leave (40 hours/year), bereavement leave, and community service/education support days, there will be plenty of time for you!
- Give Back! We offer several ways to give back through our Matching Gift Program, Good Neighbor Grant Program, and the Employee Assistance Fund.
- Finish Strong! Plan for retirement using free financial advisors and a 401(k) plan with company contributions of up to 7% of your salary.
Visit our State Farm Careers page for more information on our benefits, locations, and the hiring process of joining the State Farm team!
PandoLogic. Keywords: Insurance Examiner, Location: Morgantown, WV - 26502
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.
Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.
Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.
What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.
Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.
Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.
Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.