Engineering Structures Jobs in Miami Fl Remote
576 positions found — Page 2
A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.
Description
The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.
Job Duties:
Specific duties will include:
SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.
Requirements Analysis/Review for test-ability
Test procedure development, implementation, execution and failure root cause analysis.
Test planning and preparation.
Assess System performance against requirements
Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.
Perform verification and validation testing on developed Automated Test Equipment (ATE).
Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.
Develop and refine system and board level test cases and procedures.
Trouble shoot subsystem and system level failures to root cause.
Design test fixtures & cables to enable testing.
Perform verification and validation testing on developed Automated Test Equipment (ATE).
Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).
Trouble shoot subsystem and system level failures to root cause.
Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.
Interpret test requirements and electrical test results.
Read electrical schematics.
Test planning, preparation & execution
Required Qualifications:
3 to 5 years of experience
Strong interpersonal skills
Strong analytical skills
B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired
Will consider equivalent years of relevant experience in lieu of a formal degree
Experience working with or developing Automated Test Equipment (ATE).
Experience in hardware and test equipment troubleshooting experience.
Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand
Can operate independently
Desired Skills:
Excellent verbal and written communication skills.
Experience working independently and in a collaborative environment
Ability to react to project adjustments and alterations promptly and efficiently
Ability to effectively prioritize and execute tasks in a high-pressure environment
Familiarity with electronic components and common electronic test equipment.
Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads
Ability to interpret test requirements and electrical test results.
Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.
Experience with GIT, Tortoise SVN, or equivalent software configuration management tools
Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.
Previous experience with programming languages such as C, C++ & C#.
Previous experience with Visual Studio.
Compensation:
This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.
Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.
Propy is revolutionizing the real estate industry by building the world's first AI-powered Title and Escrow platform onchain. We have processed over $5B in transactions, and we are on a mission to make closing on a home as easy as buying a stock.
We combine blockchain for security with advanced AI to automate the heavy lifting of closing documents. We aren't just "using" AI; we are building the infrastructure that allows AI agents to securely manage escrow, eliminate fraud, and run 24/7.
We are looking for a pragmatic Applied AI Engineer to join our engineering team.
The role is not about training models and does not involve academic Machine Learning research. It is about building the rails that make AI usable in a high-stakes financial environment. You will bridge the gap between our robust C#/.NET architecture and the probabilistic world of LLMs.
Title and Escrow is a document-heavy industry with zero room for error. Your mission is to use AI to clean up the messiness of real-world real estate data.
You will solve problems like:
- Structured Data Extraction: Converting messy, unstructured data (like emails, PDFs, documents) from various sources into strictly validated JSON schemas with as close to 100% accuracy as possible.
- Escrow Automation: Designing workflows that reduce human intervention by 50% by intelligently routing tasks based on AI analysis.
- Fraud Detection: Implementing deterministic logic checks on bank and financial documents to detect fraud patterns before they happen.
- Engineer the Integration: Writing production-grade code that interacts with external AI APIs
- "Prompt Engineering" as Code: You won't just write prompts; you will version, test, and optimize them. You will define strict schemas to ensure the AI speaks the language of our internal tools.
- Orchestrate & Validate: Help in building the logic that parses AI responses, validates them against our database (MongoDB), and flags inconsistencies before they reach the user.
- Full-Stack Implementation: Work to visualize AI-aided services and data for user review and approval.
- Collaborate: Work closely with the other senior engineers and product owners to translate complex "Title & Escrow" schemas into technical constraints that an AI can understand.
- Developer DNA: You are a software engineer first. You have strong experience in Python (C# / .NET is an advantage) and understand programming in depth.
- Applied AI Experience: You have integrated LLMs into applications via API. Have experience with not only models but also AI frameworks. Experience with workflows, AI agent building and orchestration. You understand context windows, token limits, temperature, and guardrails.
- Data Handling: Experience with handling complex data structures.
- The "Glue" Mindset: You enjoy writing the code that connects different services ( like the AWS, AI APIs, and Database) to make a seamless features.
- Collaborative Autonomy: You will own the AI domain, but you won't be on an island. You will be embedded in a senior engineering team that supports you with architecture, code reviews, and best practices.
- Experience with AWS infrastructure.
- Familiarity with the US Real Estate, Title, or Escrow process.
- Working in a transparent environment which focuses on solving problems and getting things done.
- The opportunity to work with very smart and driven people.
- The ability to grow your talents and career in a high-growth sector.
- A remuneration package that is based on the candidate's motivation, skills, and experience.
Please submit your resume to this job ad along with a portfolio of your AI-related experience, GitHub account and anything else you find applicable.
This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public. The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF). Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances. The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy. The person is also responsible for the administration of the Tribe’s elevator and commercial structure annual inspections programs.
The individual works closely with the Director of the Tribal Inspector’s Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe’s Unsafe Structures Ordinance Program. The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed. Bachelor’s degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required. Master’s degree is preferred. A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.
Prior experience with EnerGov software system is preferred. Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector’s Board is required. Possession of a valid Florida Driver’s License is required. Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing. Must be able to respond and commit to full duty operations during Hurricane or other emergency events. Demonstrate proficiency with Microsoft software programs. Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required. Ability to travel and work a flexible schedule including evenings, weekends and holidays.
Construction Project Scheduler
'We're all Americaribe'. It means that we share the same culture, expertise & refers to the efforts we take every day to make ourselves operate more tightly and agilely. Our pride, achievements, and experiences have all tied to the minds of teamwork, innovation, and novelty. Talented newcomers with creative and technical skill sets like these, along with an energy and enthusiasm that effectively contribute to team morale, are always needed as Americaribe continues to grow. Beyond the high-level benefits and competitive salary is a plethora of opportunity to accentuate your career path, allowing growth from advanced trainings and experience, provided by Americaribe, to build leadership, versatility, & consistency. Americaribe LLC is known for applying its capacity for technical and commercial innovation, cutting-edge engineering skills and expertise in development to offices, hotels, airports, hospitals, schools, housing, exhibition centers, leisure facilities, etc. Americaribe is the subsidiary of Bouygues Bâtiment International, operating in over twenty countries, also known for combining its networks alongside major contracts with highly added value.
POSITION SUMMARY
The Project Scheduler is responsible for developing, maintaining, and monitoring project schedules to ensure construction projects are delivered on time and within budget. This role collaborates closely with project managers, preconstruction managers, estimators, superintendents, subcontractors, and clients to coordinate timelines, monitor progress, identify risks, and recommend corrective actions when necessary.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Schedule Development & Planning
- Develop detailed baseline schedules using tools such as Primavera P6, Microsoft Project, or similar scheduling software, covering all project phases from RFP/Project Launch through Substantial Completion and Final Turnover.
- Create Work Breakdown Structures (WBS) and define project activities, durations, and sequencing.
- Establish logic-driven critical path (CPM) and identify schedule constraints.
- Resource load schedules with quantities, labor, and cost data when required.
- Prepare schedule narratives documenting assumptions and methodologies.
- Collaborate with project managers, preconstruction managers, field teams and estimators during both preconstruction and construction phases.
Schedule Monitoring & Control
- Conduct site visits to assess and document construction progress.
- Update schedules regularly to reflect actual progress.
- Perform critical path analysis and identify variances.
- Develop recovery schedules when delays occur.
- Perform Time Impact Analyses (TIA) to assess the effects of change orders and scope modifications.
Means & Methods
- Define construction means and methods required to achieve schedule objectives.
- Develop site logistics and Maintenance of Traffic (MOT) plans in 2D or 3D formats.
Reporting & Communication
- Prepare and distribute schedule reports, dashboards, executive summaries, and look-ahead schedules.
- Present schedule status updates to internal stakeholders and clients.
- Provide scheduling input for executive reports and owner meetings.
- Maintain documentation to support claims and delay analyses when required.
Risk Management
- Identify schedule-related risks and recommend mitigation strategies.
- Conduct what-if scenario analysis to evaluate alternative approaches.
- Support dispute resolution efforts through detailed time impact analysis.
Collaboration
- Coordinate with project management, engineering, procurement, and subcontractors to ensure schedule alignment.
- Support resource planning and labor forecasting efforts.
- Ensure alignment between field operations and master project schedules.
- Perform other duties as assigned.
QUALIFICATIONS
Education
- Bachelor’s degree in construction management, engineering, or related field (preferred).
Experience
- 3 to 7+ years of experience in construction scheduling or project controls preferably within the US, South Florida or the Caribbean.
- Experience on commercial, industrial, infrastructure, or residential projects.
Technical Skills
- Advanced proficiency in Primavera P6 and Microsoft Project.
- Strong understanding of construction sequencing means and methods.
- Solid knowledge of Critical Path Method (CPM) scheduling.
- Familiarity with cost control, earned value management (EVM) principles
- Ability to use construction resources data to validate productivity rates and activity durations.
- Proficient in Microsoft Office Suite (including Excel), Power BI, Bluebeam is a must.
- Working knowledge of (or willingness to learn) BIM, Revit, AutoCAD, Navisworks, cmBuilder and Synchro 4D.
- Ability to interpret contract documents, drawings, specifications, and scopes of work.
- Ability to perform quick quantity take-offs for scheduling purposes.
Soft Skills
- Strong analytical and problem-solving skills.
- Excellent written and verbal communication skills.
- High level of attention to detail and organizational skills.
- Ability to manage multiple projects simultaneously.
- Experience working with multidisciplinary and multicultural teams.
- Innovative mindset with curiosity toward emerging technologies.
PREFERRED CERTIFICATIONS (OPTIONAL)
- PMI Scheduling Professional (PMI-SP).
- Project Management Professional (PMP).
- Planning & Scheduling Professional (PSP) – AACE.
WORK ENVIRONMENT
- Primarily office-based with regular visits to active construction sites.
- Travel may be required depending on project location.
- Full-time position with occasional extended hours to meet project deadlines.
Americaribe LLC is an Equal Opportunity Employer
Tired of playing it safe? Or maybe you’re ready to stop just "running numbers" and start steering the ship of a $100M+ portfolio.
It’s time to move beyond the calculator—and finally own the strategy that wins the work.
This is your opportunity to serve as the architect of our client's preconstruction engine. As Chief Estimator, you aren't just a department head; you are the primary gatekeeper of risk, the master of pricing strategy, and the right hand to the President. We are looking for a heavyweight leader who can navigate the complexities of South Florida’s municipal and private markets, transforming raw data into winning GMP and Design-Build recommendations.
It doesn’t stop at Chief Estimator: We aren’t just looking for a technician; we are looking for a pivotal leader. Our client is a multi-generational, family-owned powerhouse that has grown from 10 employees to over 200 by betting on the right people. We want a master of execution who can mentor the next generation of estimators while presenting final budgets directly to Ownership with total authority.
Why You'll Love This Role
- Command the Precon Lifecycle – Total oversight from early conceptual budgeting through the final handshake. You own the standards, the templates, and the "Go/No-Go" strategy.
- Lead a Specialized Force – Manage and mentor a high-performing Estimating Department, setting the bar for excellence across Hard Bid, CMAR, and Design-Build pursuits.
- High-Stakes Influence – Present your vision directly to the President and Ownership. Your risk assessments and contingency logic will be the foundation of our client's future growth.
- Deep Market Roots – Leverage a legacy of over 30 years and 1,000+ completed projects in South Florida. This isn't just a job; it’s an opportunity to build upon a massive local legacy.
What You'll Do
- Own the Bid Strategy – Define fee structures, contingencies, and escalation plans. You aren't just filling out forms; you're engineering a path to victory.
- Master Complex Execution – Lead progressive and conceptual estimating for massive projects, ensuring cost-to-budget tracking and aggressive Value Engineering.
- Direct Subcontractor Outreach – Utilize your South Florida network to drive market intelligence, ensuring 100% competitive coverage and elite-level bid leveling.
- Mitigate Risk with Precision – Maintain the risk register. Identify the scope gaps and "hidden" costs that others miss, ensuring every GMP is bulletproof.
- Foster Collaborative Design – Partner with design teams for Target Value Design and logistics planning, bridging the gap between a blueprint and a profitable reality.
What You Bring
- Industry Tenure – 10+ years of progressive estimating experience, with at least 3–5 years in a leadership/management seat.
- Regional Expertise – A robust South Florida subcontractor network and an intimate understanding of municipal bid requirements (bonds, forms, and addenda control).
- Technical Prowess – High-level proficiency in ProEst, BuildingConnected, and P6/MS Project. You should be a master of OST/Bluebeam and advanced Excel cost modeling.
- Strategic Acumen – Proven success in Hard Bid and GMP settings, with the ability to integrate logistics, phasing, and long-lead items into a master schedule.
What You'll Get
- Elite Compensation – Top-tier base salary plus bonuses tied to the success of your department and projects.
- Stability & Legacy – Join a family-owned organization with over 30 years of stability and a dedicated workforce of 200+ professionals.
- Executive Access – A seat at the table with the President and Ownership, influencing the company’s direction.
- The South Florida Lifestyle – Work for a specialized leader in one of the world's most dynamic construction markets.
- Comprehensive Benefits – Full coverage for you and your family, reflecting our client's commitment to their "qualified personnel" who make their success possible.
Ready to Command the Strategy Behind the Build? If you are a lead estimator ready to step into a Chief role with authority, distinction, and a clear path to executive influence, we want to talk.
Apply today to start the conversation.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
~ Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
~8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
~ Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
~ Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
~ Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
~ Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
*At Securian Financial the internal position title is Infrastructure Dir."
Mission
"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."
Positioning
The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.
This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.
Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.
Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.
Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.
Scope of Accountability
Resilience Engineering & Cloud Reliability
Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.
Own resilience automation, chaos testing, and IaC-based recovery validation.
Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.
Quality Engineering & Continuous Testing
Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.
Drive automation-first testing (functional, non-functional, performance, resilience).
Embed observability-driven quality validation and contract testing across services.
Performance, Capacity & Efficiency Engineering
Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).
Partner with Platform & Infrastructure teams to tune performance across application and platform layers.
Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.
Cross-Domain Architecture Collaboration
Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.
Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.
Engage Data Architects for data resilience, replication, and pipeline reliability.
Work with Business Architects to align technical reliability goals with critical business outcomes.
Leadership & Talent Development
Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.
Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.
Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.
Core Technical Competencies
AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.
Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.
Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.
Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.
Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.
Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.
Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.
FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.
Leadership Competencies
Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.
Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.
Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.
Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.
Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.
Qualifications & Experience
12+ years in cloud engineering, reliability, or platform leadership roles.
5+ years leading Sr. Managers/Managers in technical domains.
Proven expertise across AWS, with working knowledge of Azure and GCP.
Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.
Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.
Certifications:
Required: AWS Certified Solutions Architect - Professional
Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect
Success Metrics
99.9% availability maintained for Tier-1 workloads.
100% coverage of DR automation for Tier-1 services.
25% annual increase in automated quality/test coverage.
15% annual improvement in resource efficiency and cost performance.
Documented resilience participation across all enterprise architecture blueprints.
Positive "technical peer readiness" and succession rating from Head of REO.
Summary Value Proposition
This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.
It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$145,000.00 - $267,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Position Summary:
Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.
As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.
You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.
Responsibilities include but not limited to:
Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms
Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions
Qualifications:
Hands-on experience engineering and supporting cloud-based telephony or contact center platforms
Strong understanding of VoIP technologies, SIP, and call routing concepts
RingCentral and RingCentral Contact Center engineering
NiCE inContact / CXone administration and development
Cyara or similar modern telephony orchestration platforms
Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments
Solid knowledge of networking concepts related to real-time communications
Preferred Qualifications:
Supporting remote contact center agents
REST API integrations and automation
Scripting using PowerShell or Python
Workforce management, call recording, or speech technologies
PSTN carrier and phone number lifecycle management
This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.
#LI-Hybrid**This position willhave a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.