Engineering Structures Jobs in Methuen

Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.

Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.

Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.

What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.

Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.

Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.

Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Company Overview

Constitution Capital Partners, with offices in Boston and New York, is a leading alternative asset manager focused on private equity and private credit. The firm is a disciplined, value-oriented investor with a demonstrated track record of consistently generating top quartile returns. The firm is led by an experienced, cohesive team of investment professionals with significant experience investing in partnerships, direct equity, and opportunistic credit investments.

Role

Constitution Capital Partners is looking for a General Counsel to join our team. The role will partner with the investment team, investor relations and senior leadership to provide legal support and act as an advisor.

Responsibilities

• Provide strategic legal support for complex transactions across all entities
• Review, draft and negotiate contracts and documents, including fund documents, side letters and subscription materials
• Support the investment team by evaluating legal and regulatory due diligence in the deal process
• Manage and coordinate relationships with outside counsel
• Monitor regulatory and policy developments affecting the industry and provide updates as necessary
• Provide general legal support on matters and issues as needed
• Partner with CCO to evaluate risk management controls

Qualifications

• JD and active MA bar membership
• Strong academic credentials
• 8+ years of experience in the private equity/investment management group at a law form or relevant in-house experience
• Strong working knowledge of private fund structures (e.g., 3(c)(7) drawdown vehicles) and publicly registered RIC funds, including related operational, compliance and reporting considerations
• Proven ability to prioritize tasks and provide innovative solutions in a fast-paced environment
• Strong interpersonal skills, sound judgment and the ability to communicate effectively
• High standards for integrity and ethics

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

We are seeking a motivated Senior Software Section Leader to join the Patriot Software Team within the Air and Missile Defense Software Department.  As a Section Leader, you will be responsible for the oversight of software personnel to meet program needs.   The ideal candidate is a well-disciplined individual with a proven applicable technical background, who is able to thrive in a dynamic agile environment and is able to work well in a team setting. 

What You Will Do

• Ensure that each employee has suitable work assignments and opportunities for growth and advancement
• Contribute to the technical oversight of employees in support of their daily work assignments
• Performance development and appraisal
• Salary and staffing planning
• Ensuring the adherence to company policies and the communication of company and program information
• Responsible for supporting a major program task within the Patriot domain
• This position requires exclusive onsite presence. 

Qualifications You Must Have

• Typically requires a bachelor’s in science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience. 
• Minimum of 2 years experience in functional management, leading a medium to large size team
• Lead and / or project management experience
• The ability to obtain and maintain an interim secret U.S. security clearance prior to the start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Active Secret security clearance. 

• Functional management experience (Managing performance, conducting reviews, mentoring, care and feeding of staff, hiring, etc).

• Cost / Schedule Management and Reporting experience

• Strong communication, interpersonal and decision-making skills

• Customer focus and collaboration skills

• Effective presence and influential leadership capability, with the ability to interact with senior levels of leadership effectively – including customer, Raytheon Technologies teammates and suppliers

• Proven experience with software development techniques and tools, including some, or all, of the following computer languages: C and Ada

• Experience in embedded systems, real-time systems, or large-scale applications. 

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Relocation Eligible – Relocation assistance available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

This position is in Tewksbury, Massachusetts. Living in Massachusetts means you’ll have easy access to the ocean and locations of historical significance. You can enjoy varied outdoor activities ranging from hiking and camping to cross-country skiing and snowmobiling. Massachusetts is recognized as one of the best states to call “home.”

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists for an experienced Principal MMIC and Module Design Engineer to join Raytheon’s RF Microelectronics/Module Design & Foundry Services department in Andover, MA. This department develops, designs, and manufactures compound semiconductor devices, microwave/millimeter-wave integrated circuits, and modules for defense applications. The successful candidate will develop state-of-the-art MMIC and module products that support air and missile defense systems and radars. Using advanced semiconductor and module technologies, they will be responsible for the complete product cycle of the MMIC, including concept, design, layout, test, evaluation, and interfacing with the customer.

What You Will Do:

• Develop insights that extend your knowledge in the MMIC design field and form the basis of new concepts, theories, and products
• Design RF structures and transitions on multi-layer, multi-channel RF Modules and analog circuitry enabling both receive and transmit behavior
• Consult across MMIC design, module design, test and assembly teams
• Act independently to troubleshoot, and uncover and resolve issues
• Research and develop new technology that results in new product/business opportunities for Raytheon
• Serve as a technical resource and represent the Department as a technical contact to Raytheon and external customers

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and 8+ years of relevant work experience with RF/microwave/mm-wave MMIC design, module/subsystem design and test. An advanced STEM degree can count in lieu of some experience)
• Experience with Circuit Simulation tool ADS and in EM tools such as HFSS, Momentum
• Experience designing RF/Microwave MMIC circuits and modules
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Value:

• Master’s or Doctoral Degree in Electrical Engineering or related engineering curriculum
• Broad background in theory and techniques of microwave/mm-wave circuits, design, and test
• Experience in thermal modeling and analysis.
• Experience of different topology trade-offs, process and active/passive component selection, system/sub-system level, gain-loss analysis and flowing down requirements from the system to the component level
• Layout experience in Mentor Graphics’ Xpedition, Cadence Virtuoso or AutoCAD
• Experience with analytical tools such as Matlab, Python, or JMP
• Experience with microwave testing techniques, including using spectrum analyzers, Real-time Spectrum Analyzers (RSAs), Vector Network Analyzers (VNAs) and Performance Network Analyzer (PNAs)
• Experience with GaAs and/or GaN MMIC devices       
• Current DoD Secret level security clearance

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Are you ready to join a dynamic, comprehensive, and growing professional organization? The Systems Engineering (SE) Long Range Radars (LRR) department is seeking a Senior Systems Engineer to contribute to concept development, architectural design, requirements generation and flow-down, modeling and simulation, systems analysis, integration, testing, and evaluation of world-class Missile Defense and Sensor Systems. In this role, you will lead the technical development and sustainment of the Qatar Air Operations Defense System (AODS) platform infrastructure.

The AODS platform consists of Commercial Off-The-Shelf (COTS) servers, appliances, and networking equipment, operating in a dynamic environment with constantly evolving priorities. Every day presents a new set of challenges. Whether it’s hardware, software, networking, or a combination of all three, you’ll be challenged to learn how our systems work and identify the sources of new and unexpected issues through troubleshooting and data analysis.

We value various skills and experience, so don't hold back. Your qualifications could add tremendous value to our team. Our customers come from all different backgrounds, and so do our employees. If you're passionate about what you could accomplish here, we'd love to hear from you!

What You Will Do

In this role, you will collaborate across disciplines and partner with Scrum teams to implement solutions, gaining exposure to every aspect of the system while directly contributing to its success. Key responsibilities include:

• Leading system-level operations center sustainment, execution, and reporting.

• Troubleshooting hardware and software issues to maintain site operations and ensure system reliability.

• Developing and upgrading platform capabilities, including operating systems, networking, and cybersecurity components.

• Interfacing with and reporting to U.S. Government customers and Program Leadership on system development and operational status.

• Preparing integration and implementation documentation, such as plans, procedures, and reports.

• Providing reach-back support to teams supporting the operational system in-country.

• Analyzing data from operations center hardware, software, and simulations to identify and resolve issues.

• Utilizing data analysis results to support root cause identification and resolution.

• Collaborating across multi-disciplinary engineering functions to drive performance, improve system functionality, and resolve technical challenges.

• This position will be on site in Tewksbury, MA.

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.

• Experience with IT, networking, and/or system administration, including: Command and Control (C2) system hardware (e.g., servers, switches, routers), Virtual Desktop Infrastructure (VDI), Virtual Machines/Containers, SQL databases, Active Directory (Windows/Linux), and/or VMware systems.

• Experience conducting technical analysis such as data analysis, troubleshooting, and/or identifying root causes.

• Experience with virtual and hyper converged platforms.

Qualifications We Prefer

• Strong ability to clearly articulate technical concepts, both verbally and in writing.

• Proven interpersonal skills for collaboration across multidisciplinary teams.

• Adaptability to dynamic, fast-paced environments with a focus on innovative solutions.

• Experience with the Systems Engineering process, including design, development, and evaluation.

• Proven ability to develop, document, and maintain processes, methods, and tools for technical execution and sustainment.

• Experience interfacing with customers to deliver technical solutions to complex problems.

• Hands-on expertise in network configuration and troubleshooting.

• Knowledge of air defense programs and large, complex systems.

• Familiarity with command and control systems involving sensors and effectors.

• Experience with Link-16 networking and interfaces.

• Proficiency in scripting languages like Python, Ruby, or PowerShell.

• Knowledge of Microsoft Active Directory, Group Policy Objects, and identity management best practices.

• A Master's degree in Engineering, Science, Mathematics, or a related discipline is preferred.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility– Relocation assistance available

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Position Description

Immediately hiring a Permanent Full Time Senior Level Diesel Technician to support our Truck Fleet at Ryder in Dracut, Massachusetts

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $36.79 per hour
  
  
• Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Tool Box/Tool Allowance
  
  
• Schedule: Tuesday–Saturday
  
  
• Hours: Second Shift Tuesday - Friday 3:00 pm – 11:30 pm, Saturday 7:00 am - 3:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Call or text “Dracut” to 9 to speak with a recruiter today.

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 month ago (2/9/2026 8:38 AM)

Requisition ID 2

Location (Posting Location) : State/Province MA

Location (Posting Location) : City DRACUT

Location (Posting Location) : Postal Code 01826

Category Technicians/Service Employees5

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $36.79/Hr.

Max Pay USD $36.79/Hr.

Description:

Located in Hershey, PA, Milton Hershey School (MHS) is a top-notch home and school where over 2,200 pre-K through 12th grade students from disadvantaged backgrounds are provided an extraordinary, cost-free, career-focused education. This is made possible by the generosity of Milton and Catherine Hershey, who established the school in 1909 and ensured it was fully endowed. Thanks to their foresight and generosity, the school has over 12,000 graduates and continues to expand to serve more students.

MHS is hiring married couples to serve as Full-time Flex Houseparents. In this unique and life-changing career, couples reside in on-campus student homes and provide care, guidance, supervision, and support for a group of approximately 8–13 students living in the home. Flex Houseparents play a vital role in creating a structured, family-like environment that fosters students’ academic, emotional, and social development so they can reach their full potential.

Responsibilities include:

• 
  
• Providing daily supervision and mentorship
  
• Managing household routines and student schedules
  
• Administering medications and ensuring student wellness
  
• Driving students to activities, as well as planning and actively engaging in developmental and recreational activities with students
  
• Leading daily devotions and accompanying students to Sunday Chapel
  
• Overseeing budgeting and household reporting
  

Upon hire, Flex Houseparents initially support various student homes and follow a working schedule of nine consecutive days on duty, followed by three days off. On weekdays, houseparents have unscheduled time while students are in school. Flex Houseparents eventually transition into a Placed Houseparent role, where they live and work with the same group of students in their own student home.

Benefits include:

• 
  
• Salary: $44,768.00 per person (approximately $168,000 total compensation per couple, including free housing, meals while on duty, utilities, and more)
  
• Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings
  
• Relocation assistance and paid training provided
  

• 
  Paid time off provided at designated times throughout the year
  

Qualifications include:

• 
  
• Experience working or volunteering with youth
  
• This is a two-person role for couples legally married for at least two years
  
• Both spouses must be age 27 or older
  
• No more than three dependent children may reside in the student home
  
• Commitment to a smoke-free and weapon-free campus; no alcohol permitted while on duty
  
• Pet limitations: only fish and one dog of approved breeds allowed
  
• Valid U.S. driver’s license and ability to become certified to drive student home vans
  
• Comfort leading students in daily devotions and accompanying them to Judeo-Christian Sunday Chapel services (proselytizing prohibited)
  
• High school diploma or GED required
  
• Ability to lift to 50 lbs.
  
• 
  Demonstrated integrity and professionalism; MHS staff serve as role models for students
  
  

This is a unique, challenging, and rewarding career and life choice that requires a high level of commitment to student success from both spouses. For consideration, both spouses must complete individual employment applications. To learn more and apply, visit

We’re seeking dependable individuals who want to build a side income alongside their full-time work. This role offers flexible tasks you can perform outside your regular job hours. You’ll be given structured guidance and tools to identify side hustles that complement your main job, without conflict or burnout.

Responsibilities:

• Work through curated side-hustle ideas and evaluate which suit your skills and schedule

• Test and implement methods to generate extra income (e.g. remote tasks, micro-projects)

• Track your time and earnings; maintain simple reports

• Adjust your workflow and focus on the side hustles that deliver the best return

Requirements:

• Must have a full-time job already (or other main commitment)

• Reliable internet access and a device (laptop, tablet or smartphone)

• Basic organization skills and ability to work independently

• Willingness to learn and experiment

Preferred Qualities:

• Self-motivated

• Good at managing time

• Comfortable trying new things

• Able to commit a few hours each week

Benefits:

• Work on your own schedule (evenings/weekends)

• Low risk; minimal overhead

• Opportunity to scale income over time

• Support and guidance provided

We’re looking for people interested in a part-time remote opportunity to supplement their main income. This position is ideal for professionals, freelancers, and anyone who wants to improve their financial situation with flexible, manageable work.

You’ll receive access to structured resources explaining simple, effective ways to earn extra income using your existing skills and free time.

Responsibilities:

• Review step-by-step guides and apply them independently

• Choose methods that fit your experience and lifestyle

• Monitor and report your own results to measure progress

• Maintain consistency and reliability

Requirements:

• Reliable internet connection and basic computer literacy

• Strong self-motivation and time management

• Comfortable working independently

• Willingness to learn new approaches

Benefits:

• Remote and flexible schedule

• No selling or cold calling

• Practical ways to build a stable side income

• Opportunity for long-term financial growth

Position Type:Full-time, exempt

Compensation: Up to $165,000 annually

Job Location: In person

Job Highlights

• 6-Hour Shifts Daily: Short, balanced workdays.
• Flexible Schedules: Work around your life.
• No On-Call: Free weekends
• No Overnight Requirements
• Supportive Community: Access to physician/provider network.
• Effortless documentation: Conversational and Dragon dictation.
• Meaningful Connections: Establish lasting relationships with patients and staff.
• Paid Time Off! No holidays!
• Culture of Appreciation: Your work is valued and rewarded.
• $1,500 CME and Conference Allowance: Invest in your growth.
• Full Gear: iPad with LTE, Apple Pen, AirPods provided.
• Licensure Reimbursed: We cover your medical licensure costs.
• Malpractice & Tail Covered: Full insurance peace of mind.
• Benefits: 401k match, Medical/Dental/Vision, Disability, Employer-paid Life Insurance.
• Relocation Help: Assistance for a smooth move.
• Referral Bonus: Earn more by expanding our team.
• Travel Reimbursed: Gas and mileage for work travel.
• Career Advancement: Leadership opportunities promoted.
• UpToDate Subscription: Latest medical info at your fingertips.

Essential Functions & Responsibilities

• Provider is responsible for rounding and managing the clinical care of the population at the assigned SNF.
• The provider is responsible for rounding daily and prescribing medications and treatments for residents residing at SNFs.
• Provider will provide high quality, patient-centered, comprehensive primary care services to patients residing in SNFs.
• Provider is responsible for timely documentation of all patient care/encounters
• The provider will be available for phone/secure messaging consultations with facility nursing staff.
• Provider documentation is completed in Theoria's proprietary electronic health record (EHR) system, ChartEasy?.
• PointClickCare, MatrixCare, and American HealthTech are the most commonly used facility EHR systems.
• Provider is expected to be on-site on and on time for their in-person scheduled shifts.
• Timely attendance is imperative.
• Reliable transportation required.

Company Overview

Leading the charge in healthcare innovation, Theoria Medical offers a unique blend of medical excellence and technological advancement, primarily serving the post-acute and primary care sectors. Our extensive network includes multispecialty physician services and RPM, covering skilled nursing facilities across the country. In our national push for expansion, we're scouting for the brightest nurse practitioners and physicians eager to drive change and deliver superior care. Join us for a rewarding career that promises professional growth, flexibility, and the chance to shape the future of healthcare.

Shift Structure

• Rounding time is 7AM-1PM local time, during which the provider must be available to nursing staff and address acute/emergent issues that arise.
• Shifts begin around 7AM local time with flexibility within reason.
• Shifts are daily Monday-Friday
• Charting/documentation can be completed off-site.
• This is an in-person position.

Compensation and Benefits

• Salary based with monthly productivity bonuses.
• Paid Time Off.
• 401k with employer matching and participation
• Medical, vision, and dental insurance
• Short term and Long term disability insurance.
• $1,500 CME allowance.
• Malpractice insurance covered by employer.
• Medical licensure expenses reimbursed by employer.
• Opportunities for training
• All equipment and practice expenses covered.
• Employer Paid - Life Insurance Policy

Employee must be able to perform the essential functions of this position satisfactorily, with or without a reasonable accommodation. Employer retains the right to change or assign other duties to this position. All benefits and job highlights are subject to and contingent upon availability.

#LI-JT1 #LI-Onsite #IND-REFRESH-STD

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Manufacturing Engineers learn production operations and the manufacturing discipline in a controlled environment.  They develop manufacturing engineering skills alongside their team; internalize an understanding of safety, quality, delivery, and cost; and use Raytheon systems and tools to create innovative and unique solutions to today’s manufacturing challenges. Manufacturing Engineers build technical depth into manufacturing processes and are accountable for improvement and optimization.

Primary responsibilities include developing the comprehensive manufacturing process for 3D metal parts for various radar, integrated sensor, and effector programs. The candidate will create, test, and upgrade Coordinate Measuring Machine (CMM) programs, develop and document fixturing and setups for CMM inspection, and create inspection plans. They will also assess process failures, disposition non-conforming hardware, and create and execute robust Root Cause/Corrective Action plans to permanently solve problems. This position requires close cooperation with the Operations team and other engineering disciplines. The desired candidate will possess excellent communication skills and be capable of working in a dynamic team environment.

What You Will Do

• Translate engineering design requirements into formal manufacturing process documentation including CMM programming, inspection planning, finishing requirements, and assembly instructions

• Support process improvements using data analysis, application of best practices, engaging with production personnel, and implementing innovative solutions to improve process capability and decrease cost

• Design, control, and improve the manufacturing process through collaboration with a multi-disciplined team

• Self-manage workload to support existing production, perform non-recurring engineering work for new products, and drive improvement projects to completion.

• Communicate effectively with Engineering and Operations leaders in department to ensure schedule needs are met and where any barriers to progress exist.

• Perform process development on new product introductions with an accelerated time to market

• Support continuous improvement initiatives and document standard methodologies and standard work for CMM and manual inspection operations

• Review metrology and statistical process control (SPC) data to identify and address potential defects before they occur

• Troubleshoot manufacturing issues alongside Quality and Operations personnel and apply CORE/6-sigma methods to determine Root Cause and apply Corrective Actions

Qualifications You Must Have

• Typically requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and a minimum 5 years of prior relevant experience. 

• Knowledge of CMM programming and workpiece holding and manual inspection methodology

• 5+ years correctly interpreting engineering drawings, including ASME Y14.5 Geometric Dimensions and Tolerances as well as typical government and industry specifications

• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• CMM programming experience for complex workpieces typically requiring 4+ axis machining centers

• Demonstrated working knowledge of Creo CAD Software

• Process familiarity with paint, plating, and structural assembly

• Results-oriented focus on past projects to evaluate success

• Demonstrated hands-on mechanical aptitude

• Strong organization skills with ability to manage multiple tasks simultaneously

• Ability to work individually to support team/department success

• Excellent written, verbal, visual, and graphical communication skills

• Possess excellent judgment and professional maturity

• Knowledge and ability to apply CORE principles and techniques

• Active DoD Security Clearance

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms