Engineering Structures Jobs in Martindale Texas Remote
435 positions found — Page 4
Our staff of more than 700 Associates works with more than 300 active and consulting physicians to provide quality services to patients and their families.
For more than 20 consecutive years, we have been named The Best Hospital in Hays County in the annual "Best of Hays" publication released by the San Marcos Daily Record.
In addition to interventional cardiac services, CHRISTUS Santa Rosa Hospital – San Marcos is a Certified Chest Pain Center and an accredited Primary Stroke Center.
We lead the region in da Vinci robotic-assisted surgery and offers a variety of specialty care services including medical imaging, rehabilitation, hospice, women's services and more.
Summary: The Catheterization Laboratory Technician II is an experienced member of the cath lab team, proficient in supporting a wide range of diagnostic and interventional cardiac procedures.
This role involves meticulous preparation of the lab, equipment, and supplies, ensuring accurate patient documentation, and maintaining a stringent sterile technique throughout procedures.
The Technician II also serves as a valuable resource and preceptor for junior technicians and technologists, sharing expertise in advanced procedures and technology while upholding the highest standards of patient safety and departmental efficiency.
Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church.
Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process.
Participates in daily room checks and stocking of supplies.
Accesses daily patient schedule and appropriate patient information for assigned procedures.
Ensures appropriate equipment, supplies, and room configuration for all procedures.
Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times.
Ensures proper patient information is entered into cath lab computer and imaging systems.
Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures.
Ensures patient position is appropriate and safely secured on procedure table per procedure type.
Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: imaging (intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc.
Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition.
Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified.
Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure.
Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion.
Supports the department and team by engaging in patient transport as appropriate.
Obtains and maintains proficiency in access site management.
Acts as radiation safety representative for patients and team while X-Ray is used but is not licensed to administer fluoro imaging.
Adheres to the attendance policy and departmental productivity standards.
Supports the department and organization's commitment to Zero Harm and Customer Service.
Adheres to departmental and organizational dress code.
Understands and upholds the CHRISTUS mission, vision, and purpose.
Supports and promotes Unit-based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status.
Promotes and serves with respect to the CHRISTUS core values: Dignity, Integrity, Excellence, Compassion, Stewardship.
Serves as a preceptor for Technicians and Technologists I.
Acts as a team resource for advanced procedures and technology such as structural heart procedures, IABP, Impella, and LVAD.
Job Requirements: Education/Skills Associate's degree in cardiovascular technology, radiologic technology, or a healthcare-related field preferred Experience 2 years of Diagnostic, Interventional Radiology, or Cath/EP Lab experience is required Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is required: Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule: 5 Days
- 8 Hours Work Type: Full Time
Your opportunity
At Schwab, you're empowered to make an impact on your career. Here, innovative thought meets creative problem solving, helping us "challenge the status quo" and transform the finance industry together.
We believe in the importance of in-office collaboration and fully intend for the selected candidate for this role to work on site in the specified location(s).
Global Investing Services (GIS) is a specialized group that serves the trading, customer service and operational needs of both domestic and international clients interested in trading stocks that trade on exchanges outside the U.S. as well as foreign currencies. GIS has daily interactions from virtually every customer contact area of Schwab (Branches, Retail, Advisor Services, Schwab Wealth Advisory, etc.) and works to promote outstanding client experience as it relates to all facets of their international equity investments. GIS also has direct-line telephone contact with external market makers as well as the various major market centers in foreign securities. In addition to assisting US clients, GIS regularly serves clients living outside the U.S. that have international accounts with us to provide investment, trading and operational inquiries.
What you are good at:
This role is responsible for helping clients develop their trading expertise and grow their portfolios by imparting the knowledge and supporting the tools trader clients use to make them a more sophisticated, successful, and self-directed investor. This position is the subject matter expert in trading equities, derivatives (options, futures), and foreign exchange for not only our clients, but the goal is also to help clients develop their trading expertise and grow their portfolios by imparting the knowledge and supporting the tools these actively engaged clients use to make them a more sophisticated, successful self-directed investor. Representatives in this position will possess an advanced level of knowledge of trading equities, derivatives (options/futures), and foreign exchange. We grow business through asset gathering and product cross-sell while retaining assets through client confidence and loyalty. Together, we leverage industry knowledge and platform expertise to send well-positioned business leads to our partners in Retail Sales, Education and Trader Business Development. Additionaly, you'll influence and close business for Retails Sales associates by presenting self-directed active trader clients and prospects with industry standard for market understanding while attracting additional assets and business from our fully engaged clients, by meeting their service, education and trading resource needs.
What you have
To ensure that we fulfill our promise of "challenging the status quo," this role has specific qualifications that successful candidates should have.
REQUIRED QUALIFICATIONS:
- Active Series 7, 63 licenses required.
- Excellent communicative skills, both oral and written, and can succinctly explain complex topics with proper positioning, context, and accuracy.
- 3+ years of experience servicing clients and an equivalent level of knowledge of securities industry.
- Ability to educate clients and colleagues on complex concepts and to varying levels of expertise while displaying confidence, skill, and professionalism to resolve time-sensitive and possibly costly issues in a manner that strengthens the client relationship and mitigates risk for the firm.
- Must have necessary sense of urgency and the ability to multi-task utilizing strong business judgment and prioritization skills.
PREFERRED QUALIFICATIONS:
- Prior professional trader level of expertise in equities, futures, market structure and a detailed knowledge of the securities industry and capital markets is preferred.Bachelor's Degree or equivalent experience
- Minimum two years of equity trading experience, derivatives trading, or other equivalent experience is preferred.
- Bachelor's Degree or equivalent experience preferred.
- Strong knowledge of industry, product availability, policies and procedures involving international client relationships.
- 9/10 License also preferred.
In addition to the salary range, this role is eligible for bonus or incentive opportunities.
What's in it for you
At Schwab, you're empowered to shape your future. We champion your growth through meaningful work, continuous learning, and a culture of trust and collaboration—so you can build the skills to make a lasting impact. Our Hybrid Work and Flexibility approach balances our ongoing commitment to workplace flexibility, serving our clients, and our strong belief in the value of being together in person on a regular basis.
We offer a competitive benefits package that takes care of the whole you – both today and in the future:
- 401(k) with company match and Employee stock purchase plan
- Paid time for vacation, volunteering, and 28-day sabbatical after every 5 years of service for eligible positions
- Paid parental leave and family building benefits
- Tuition reimbursement
- Health, dental, and vision insurance
* as part of their total compensation package.
Bonus eligibility and payout structure will be discussed early in the interview process.
A Nursing Role Built for Focused, One-on-One Care At Care Options for Kids, pediatric home health nursing is intentionally different.
Instead of juggling multiple patients, alarms, and constant interruptions, you provide dedicated, one-on-one care in the home, allowing you to focus fully on your patient and use your clinical judgment with confidence.
In this role, you'll care for pediatric patients with high acuity needs while building consistent relationships with both the child and their family.
Nurses who thrive here value autonomy, continuity of care, and the ability to deliver skilled nursing in a calm, controlled environment, backed by real clinical support whenever it's needed If you're an RN looking for a role where you can practice nursing with focus, purpose, and support, this position was designed with you in mind.
Care Options for Kids Benefits Weekly Pay and Direct Deposit Paid Time Off (PTO) and flexible scheduling Medical, Dental, and Vision Insurance 401(k) Retirement Plan Employee Referral Bonus Opportunities Career Advancement Opportunities Training and Competency Development Respiratory Therapists on Staff to Provide Training and Mentorship 24/7 On-Call Clinical Support Support That Keeps You Safe and Confident Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
24/7 on-call clinical support whenever you need it Training and competency support for high-acuity care Clear care plans and physician orders PPE provided in every home, including masks, gloves, and hand sanitizer, with care aligned to CDC safety guidelines A dedicated team focused on nurse safety and success Requirements Current, active Texas RN license Current BLS CPR card (obtained in-person, not online) G-tube, trach, vent experience, or willing to train Care Options for Kids is an Equal Opportunity Employer.
We celebrate diversity and are committed to creating an inclusive environment for all employees.
*Restrictions Apply.
Connect with Talent Acquisition Specialist for details on Sign On Bonus eligibility and payout schedule.
RDNUATX Salary: $32.00
- $39.00 / hour
* as part of their total compensation package.
Bonus eligibility and payout structure will be discussed early in the interview process.
A Nursing Role Built for Focused, One-on-One Care At Care Options for Kids, pediatric home health nursing is intentionally different.
Instead of juggling multiple patients, alarms, and constant interruptions, you provide dedicated, one-on-one care in the home, allowing you to focus fully on your patient and use your clinical judgment with confidence.
In this role, you'll care for pediatric patients with high acuity needs while building consistent relationships with both the child and their family.
Nurses who thrive here value autonomy, continuity of care, and the ability to deliver skilled nursing in a calm, controlled environment, backed by real clinical support whenever it's needed If you're an RN looking for a role where you can practice nursing with focus, purpose, and support, this position was designed with you in mind.
Care Options for Kids Benefits Weekly Pay and Direct Deposit Paid Time Off (PTO) and flexible scheduling Medical, Dental, and Vision Insurance 401(k) Retirement Plan Employee Referral Bonus Opportunities Career Advancement Opportunities Training and Competency Development Respiratory Therapists on Staff to Provide Training and Mentorship 24/7 On-Call Clinical Support Support That Keeps You Safe and Confident Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
24/7 on-call clinical support whenever you need it Training and competency support for high-acuity care Clear care plans and physician orders PPE provided in every home, including masks, gloves, and hand sanitizer, with care aligned to CDC safety guidelines A dedicated team focused on nurse safety and success Requirements Current, active Texas RN license Current BLS CPR card (obtained in-person, not online) G-tube, trach, vent experience, or willing to train Care Options for Kids is an Equal Opportunity Employer.
We celebrate diversity and are committed to creating an inclusive environment for all employees.
*Restrictions Apply.
Connect with Talent Acquisition Specialist for details on Sign On Bonus eligibility and payout schedule.
RDNUATX Salary: $32.00
- $39.00 / hour
* as part of their total compensation package.
Bonus eligibility and payout structure will be discussed early in the interview process.
A Nursing Role Built for Focused, One-on-One Care in Texas At Care Options for Kids, pediatric home health nursing is intentionally different.
Instead of juggling multiple patients and constant interruptions, you provide one-on-one care in the home, allowing you to focus fully on your patient and deliver care with confidence and consistency.
In this role, you'll support pediatric patients with skilled nursing needs while working closely with a registered nurse and clinical leadership.
LVNs who thrive here value meaningful patient relationships, clear direction, and the reassurance of knowing support is always available when needed.
If you're an LVN looking for a role that offers stability, support, and the ability to make a real difference in a child's life, this position was designed with you in mind.
Care Options for Kids Benefits Paid Time Off (PTO) and flexible schedule Medical, dental, and vision coverage 401(k) retirement plan Weekly pay and direct deposit 24/7 On-Call for support CEU credits Training opportunities Nurse Referral Bonus Support That Keeps You Safe and Confident Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
24/7 on-call clinical support whenever guidance is needed Clear plans of care with RN oversight PPE provided in every home, including masks, gloves, and hand sanitizer Care delivered in alignment with CDC safety guidelines A clinical team focused on nurse safety and success Requirements Active LVN license in state of practice (or multistate license, if applicable) Current BLS/CPR certification (in person, not online) G-tube, trach, or ventilator experience or willingness to train Care Options for Kids is an Equal Opportunity Employer.
We celebrate diversity and are committed to creating an inclusive environment for all employees.
*Restrictions Apply.
Connect with Talent Acquisition Specialist for details on Sign On Bonus eligibility and payout schedule.
RDNUATX Salary: $22.00
- $29.00 / hour
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
