Engineering Structures Jobs in Herndon Hybrid
466 positions found
Sr Staff Engineer Systems
✦ New
$92.69 - 139.04
RELOCATION ASSISTANCE: Relocation assistance may be availableCLEARANCE REQUIRED FOR START: YesCLEARANCE TYPE: SCITRAVEL: Yes, 25% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.
Northrop Grumman’s Space Sector is seeking a Senior Staff Systems Engineer to serve as an Engineering lead for a space mission payload critical to our nation to join our team in Dulles, VA. This position is 100% onsite and cannot accommodate telecommute work.
This role includes Engineering and project management through all phases of the program, from concept development and industry trade study preliminary and detailed design, payload integration & test, space vehicle integration and test and potentially on-orbit demonstration.
This position will work a 9/80 schedule, with every other Friday off.
Your mission, should you choose to accept:
- Functioning as the primary payload interface for customers, program management, product line engineering leadership, mission assurance and subsystem engineering teams
- Providing Technical Support / Oversight including
- Conducting technical trades in coordination with the Mission and Space Vehicle SE teams
- Ownership of payload specs and requirements traceability
- Developing and managing Interface-Control Documents (ICD) between the prime and sub-contractor
- Playing a key role in major program milestone and readiness reviews
- Planning, design, and execution of testing strategies to ensure payload qualification, exercise payload functionality and measure performance
- Supporting the development of operational mission scenarios and payload concepts of operations
- Payload sub-contractor oversight, including cost and schedule performance including
- Review / Tech Eval of subcontractor proposals
- Cost account manager (CAM) for Payload WBSs using EVMS
- Recognizing and mitigating payload related issues and risks
If this job description reads like it was written specifically for you, consider joining our team!
This position is contingent upon the candidate obtaining final clearances and program access(es) within a reasonable period of time as determined by the company.
Basic Qualifications:
- Bachelor’s degree with 14 years of professional experience – OR – Master’s degree with 12 years of professional experience – OR – PhD with 10 years of professional experience
- Requires an active Top-Secret/Sensitive Compartmented Information (SCI) clearance at time of application
- Experience working medium size or larger Government programs
- Experience in managing sub-contractors
- Knowledge of aerospace environmental testing standards
- Experience with spacecraft design, development integration and test
- Experience with payload integration inclusive of ICD development
Preferred Qualifications:
- 15+ yrs of direct experience with Space systems
- Established network of contacts in other NG divisions/sectors/programs
- Proposal experience
- CAM experience
Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below:
NOVASPACE
Primary Level Salary Range: $192,800.00 - $289,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
permanent
Controls & Integration Engineer II, Electrical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Not Specified
P
DevOps Engineer
Salary not disclosed
DevOps Engineer
Job ID
2026-2165
# of Openings
1
Category
Software Engineering
Overview
Pyramid Systems is seeking an experienced DevOps/AWS Engineer take responsibility for creating, building, deploying, orchestrating, and automating deployment packages in AWS cloud-based environment.
Responsibilities
- Design and automate cloud environments at scale using Infrastructure as Code tools
- Design and develop fully automated software delivery pipelines
- Efficiently collaborate within and across agile teams to maximize productivity
- Develop technical documentation, architecture diagrams, and similar
- Engage in all agile ceremonies including backlog grooming, demos and retrospectives
- Eliminate roadblocks and hindrances preventing teams from delivering software
- Assist the team in documenting and leveraging cloud and DevOps best practices
- Fullstack development using modern frameworks and languages Python or JavaScript
- Quickly learn and adapt to new technologies, frameworks, or project requirements as needed
- Apply critical thinking and a solutionoriented mindset to identify issues and propose effective resolutions
- Integrate AI/ML models into applications to enhance functionality, automation, and overall user experience
- Collaborate with crossfunctional teams to design scalable architectures supporting both traditional and AIdriven features
- Implement best practices for model deployment, data handling, and performance optimization in AIenabled systems
Qualifications
- Bachelor's degree in computer science, engineering, or related field
- Must have AWS certs and/or CompTIA relevant certifications
- 5+ years of experience managing cloud or virtualized infrastructure
- Passionately practices Infrastructure automation using Terraform, Ansible, or similar
- Knowledge and familiarity with Docker and Kubernetes
- Fluent in at least one programming language - Python, Go, Typescript, JavaScript or similar
- Strong system administration experience in Linux
- Knowledge of AWS DevOps with GitHub Actions, GitLab CI/CD, Jenkins, or similar
- Strong team player, communicates well, and caries an infectious can-do attitude
- Must have hands on experience with Claude Code or similar AI tools
- Strong experience in compliance frame works like: ATO, SOC 2, PCI-DSS, FedRAMP, NIST 800-53, or CIS Benchmarks
Target Pay Range
The below listed pay range for this position is not a guarantee of compensation or salary. The final offered salary will be influenced by a host of factors including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at Pyramid Systems that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits, to include our Employee Stock Ownership Program, FlexPTO, and learning and development opportunities.
Pyramid Min
USD $123,760.00/Yr.
Pyramid Max
USD $185,640.00/Yr.
Why Pyramid?
Pyramid Systems, Inc. is an award-winning, technology leader, driving digital transformation across federal agencies. We empower forward-thinking innovations, accelerate production-ready software, and deliver secure solutions so federal agencies can meet their mission goals. Voted a Top Workplace, both regionally (Washington, DC) and Nationally (USA) the past 2 years (2023 and 2024) based on the feedback from our employees, we are headquartered in Fairfax, VA. and have a growing national footprint. We value and promote our Flexible Workplace approach because of the positive impacts it has on work-life integration. We remain committed to ensuring every employee's voice is heard, performance and results are recognized and rewarded, development and advancement is a focus, and diversity, equity and inclusion is a company priority. We offer competitive compensation and benefits (including a recently launched Employee Stock Ownership Plan - ESOP), a robust performance-based rewards program, and we know how to have fun! Our people and culture have endured and delivered for our clients for nearly three decades.
EEO Statement
Pyramid Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
Not Specified
P
Software Sales Development Representative (Federal SaaS)
✦ New 🏢 Pyramid Systems
Salary not disclosed
Software Sales Development Representative (Federal SaaS)
Job Locations
US
Job ID
2026-2166
# of Openings
1
Category
Analyst
Overview
Pyramid is seeking a high-energy, self-motivated Software Sales Development Representative (SDR) to drive pipeline growth for AIR-Quire and future Pyramid software products. This is a hunter role focused on proactive outreach, cold calling, lead generation, and securing qualified demos within federal civilian and DoD agencies as well as non-governmental entities.
This individual will identify target agencies, research key decision-makers, execute structured call campaigns, and generate qualified opportunities that convert into product demonstrations and revenue. The SDR will work closely with the CGO, Nexus technical team, and CFO to move prospects from initial contact through demo, pricing strategy, and contract award.
This is a new and highly visible role that will help establish Pyramid's product sales engine.
Responsibilities
Pipeline Development & Cold Outreach
- Conduct structured cold calling campaigns to federal agencies, system integrators, and contracting partners.
- Research and identify target agencies, buying offices, and key decision-makers (COs, PMs, CIO shops, acquisition leadership).
- Build prospect lists using GovWin, , FPDS, LinkedIn, agency forecasts, and other federal data sources.
- Execute outbound email, LinkedIn, and phone campaigns to secure discovery calls and product demos.
- Track outreach cadence and follow-up schedule to ensure persistent, professional engagement.
Sales Planning & Strategy Execution
- Develop and maintain a 30-60-90 day sales plan and call plan aligned to AIR-Quire growth targets.
- Maintain weekly activity metrics (calls, emails, meetings secured, and demos scheduled).
- Track pipeline status and conversion metrics in CRM (HubSpot, Salesforce, or equivalent).
- Identify target contract vehicles and existing programs where AIR-Quire can be positioned.
- Coordinate with CGO to align outreach with broader capture and growth strategy.
Demo Coordination & Opportunity Advancement
- Qualify prospects before scheduling demos.
- Coordinate with the Nexus team to schedule and prepare technical demonstrations.
- Prepare briefing materials and background summaries for leadership before demos.
- Support follow-up after demos with structured next steps and documented action items.
- Partner with CFO and CGO on pricing strategy and proposal support once an opportunity matures.
Relationship Building
- Establish relationships with federal acquisition professionals and program offices.
- Position AIR-Quire as a mission-enabling AI solution aligned to federal modernization priorities.
- Identify pilot opportunities and land-and-expand pathways.
Qualifications
- 1-4 years of experience in software sales, SaaS sales, or federal business development.
- Demonstrated comfort with cold calling and outbound prospecting.
- Strong research and analytical skills.
- Highly organized with disciplined tracking and follow-up habits.
- Strong written and verbal communication skills.
- Ability to confidently engage federal decision-makers.
- U.S. Citizenship required.
Preferred Qualifications
- Experience selling into the federal government.
- Familiarity with federal procurement processes and contract vehicles.
- Experience using CRM platforms and sales tracking tools.
- Exposure to AI, SaaS, GovTech, or acquisition of modernization environments.
Success Metrics (First 6-12 Months)
- 15-25 qualified discovery calls per month.
- 8-12 demos scheduled per month.
- Documented and measurable pipeline growth.
- Support closing of first 2-3 product deals.
- Establish repeatable outbound playbook for AIR-Quire product sales.
Target Pay Range
The below listed pay range for this position is not a guarantee of compensation or salary. The final offered salary will be influenced by a host of factors including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at Pyramid Systems that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits, to include our Employee Stock Ownership Program, FlexPTO, and learning and development opportunities.
Pyramid Min
USD $101,829.93/Yr.
Pyramid Max
USD $152,744.89/Yr.
Why Pyramid?
Pyramid Systems, Inc. is an award-winning, technology leader, driving digital transformation across federal agencies. We empower forward-thinking innovations, accelerate production-ready software, and deliver secure solutions so federal agencies can meet their mission goals. Voted a Top Workplace, both regionally (Washington, DC) and Nationally (USA) the past 2 years (2023 and 2024) based on the feedback from our employees, we are headquartered in Fairfax, VA. and have a growing national footprint. We value and promote our Flexible Workplace approach because of the positive impacts it has on work-life integration. We remain committed to ensuring every employee's voice is heard, performance and results are recognized and rewarded, development and advancement is a focus, and diversity, equity and inclusion is a company priority. We offer competitive compensation and benefits (including a recently launched Employee Stock Ownership Plan - ESOP), a robust performance-based rewards program, and we know how to have fun! Our people and culture have endured and delivered for our clients for nearly three decades.
EEO Statement
Pyramid Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
Not Specified
Project Manager, Construction II
🏢 CPG
Salary not disclosed
Position:
Project Manager, Construction II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
969
# of Openings:
1
LOCATION: Ashburn, VA
*Salary Negotiable*
CPG Participates in E-Verify
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Project Manager, Construction II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
969
# of Openings:
1
TITLE: Project Manager, Construction II
LOCATION: Ashburn, VA
POSITION SUMMMARY:
As Project Manager, Construction II you will be responsible for providing leadership and driving success of multiple facets of data center projects. The position covers all aspects of construction. Areas of expertise require autonomy and independent discretion in the following areas:
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- RFP development and budgeting
- Pre-bid oversight and coordination
- Managing all design phases and documents
- Conduct project meetings, publish, and distribute minutes, develop milestones, and maintain monthly reports.
- Manage day-to-day office and field operations.
- Review the plans and specifications for constructability and construction schedules. Advise the project team of any issues or deficiencies.
- Prepare, manage, and update the detailed project schedule with sequence and activity duration including procurement items.
- Customer engagement for sales and fulfillment of requirements
- Coordination and supervision of design-build contractors
- Coordination with internal stakeholders and subject matter experts
- Oversight of physical construction activities
- Participation in commissioning
- The management of close out and hand-off of physical data center and project documents to customer
- Collaborate with the design team, operators, and clients.
- Submit monthly project financial reporting, including forecasting, cash-flow, etc.
- Review monthly contractor billing and perform job walks to substantiate progress.
- Keeps all relative parties informed of progress throughout the life of the project.
- Develop, manage, maintain, and assist with contract negotiation of new and existing vendors.
- Oversee RFI and Submittal Review Process.
- Manage the Change Order Process with Owner and Subcontractors.
- Manage input and delivery of work products from internal team members to ensure that new data center spaces comply with the project requirements, customer requirements, all engineering standards, applicable codes, and specifications.
- Understand project budget/estimate and budget set-up.
- Develop and understand trade contractor and supplier contract scopes, with a constant focus on procurement and lead-time of materials to maintain schedule.
- Develop, document, and drive lessons learned, process improvements, cost, and schedule savings initiatives throughout the project lifecycle.
- Work closely with the proposal team to coordinate design criteria with budgetary issues and ongoing maintenance and operation of existing facilities.
- Awareness of the importance of mission-critical facility operation
- Safety standards knowledge and enforcement. (OSHA 30 Hour preferred)
- *Schedule shifts may incl nights/weekends as per bell curve requirements
- Additional duties may be assigned as project needs adjust at Management's discretion.
QUALIFICATIONS:
Education/Experience (Desired):
- Bachelor of Science in Construction Management, or a similar field, or equivalent experience
- Construction/Engineering/Architectural degree a plus
- 5-7 years of experience in managing construction projects required
- Datacenter experience is preferred
- Experience in CSA (civil, structural, architectural) and MEP (mechanical, electrical, plumbing) construction management is a requirement.
Computer Skills:
- Competency in Microsoft Office applications, including Word, Excel, Outlook, and Teams
- Proficient in PROCORE
Certificates and Licenses:
- No certificates or licenses required
Supervisory Responsibilities:
Supervise one or more Superintendent or Project Coordinator or Assistant Project Manager
Travel Required: 30-50%
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
Health Benefits - (Medical, Dental & Vision Insurance)
Flexible Spending Account Options
401K Plan
Employer paid Life & Disability Insurance
Paid Time Off
Employee Referral Program
Employee Assistance Program (EAP)
*Salary Negotiable*
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded