Engineering Structures Jobs in Granite Falls Washington
27 positions found
This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.
Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; Develops and implements product/process improvements.
Represents the engineering community from initial build through the production and post-production environment.
Ensures supplier and build partner compliance with Boeing standards.
Develops customer correspondence for continued safe operation and maintenance of equipment.
Participates in on-site disabled product repair teams, accident investigation and support teams.
Designs interim structural repairs and conducts static strength analysis.
This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.
This position participates in the approximately 9-month Boeing Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Boeing Puget Sound sites during the training rotation.
Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
~14+ years of experience in structures, systems, design, or production engineering
Hands-on experience with materials and manufacturing processes.
Prior BCA Engineering Material Review Board (MRB) Certification
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This position is for multiple shifts and may require off shift, weekend, and travel assignments.
The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.
Union:
This is a union represented position.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
~ Applications for this position will be accepted until Mar. S. export control compliance requirements. S. export control compliance requirements, a “U.Citizen, U.National, lawful permanent resident, refugee, or asylee.
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
The Safety, Security & Airworthiness organization is seeking to fill a Senior Manager position within the Enterprise Regulatory Administration team. This position is responsible for teams associated with the administration, oversight, and support of the FAA appointed Boeing Organization Designation Authorization (ODA) Unit, including Engineering Unit Members, Inspection Unit Members, and Project Administrators who perform functions on behalf of the FAA. This includes overseeing the appointment, training, and annual assessment of the ODA Unit Members. This role will provide technical leadership to support the communication and resolution of complex regulatory and compliance issues with the FAA and ODA unit members.
The ideal candidate has experience in leading cross-functional teams, integration across IPTs, certification, safety, and systems engineering. Coordination with regulatory agency counterparts and internal stakeholders will also be central to this role.
The successful candidate must be qualified, in accordance with FAA Order 8100.15, to be appointed by the FAA as an Administrator for the Boeing ODA unit.
This position manages a direct-reporting team of first-level managers and non-management employees performing engineering and technical activities in the Systems Engineering skill area. A successful applicant will thrive as an essential part of a collaborative environment that extends to external stakeholders, and will be able to successfully balance tactical business needs while working towards strategic goals.
Prepare certification documents and artifacts for submission to Regulatory Administration and FAA stakeholders; Develops and executes integrated departmental plans, policies and procedures and provides input on departmental business and technical strategies, goals, objectives
Acquires resources for department activities and leads process improvements
Develops and maintains relationships and partnerships with regulatory authorities, customers, stakeholders, peers, partners and direct reports
Manages, develops and motivates employees and first-level managers
Creates a culture of continuous improvement and employee engagement to achieve organizational quality, productivity, and timeliness results
The selected candidate will be required to work onsite at the Everett, WA site.
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
~5+ years of engineering experience
~Currently or previously held an FAA ODA Unit Member or Administrator or FAA Designee appointment, or is able to readily obtain an FAA appointment
Experience with FAA regulations, policies, and procedures applicable to the ODA functions
~3+ years of experience working directly with the FAA and/or ODA on type Certification projects
~ Bachelor’s degree or higher in Engineering, current engineering managers who do not have an engineering degree but have previous experience in a professional exempt engineering SJC classification will still be considered for exception
~ Practical experience conducting analyses and studies for safety, system security, regulatory, certification, product assurance and other specialties to ensure mission success
~ Proven ability in team building, coaching, and employee development
~ Experience applying systems engineering and project management best practices
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Applications for this position will be accepted until Mar. S. export control compliance requirements. S. export control compliance requirements, a “U.Citizen, U.National, lawful permanent resident, refugee, or asylee.
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington .
This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.
The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment.
Primary responsibilities:
- Provides technical guidance and training relative to complex safety and airworthiness matters
- Coordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams
- Review certification plans, write letters to regulators, and understand compliance process
- Leading cross-functional teams resulting in resolution of technical issues.
- Coordinate technical messaging and partnering with the FAA on regulatory issues
- Own, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)
- Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance
- Develop strategic action plans for changes to certification processes and execute those plans through completion
- Contribute to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans
Basic Qualifications (Required Skills and Experience):
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
- Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
- 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects
- 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
- Experience with project management and self-managing projects.
- Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees
- Ability to accomplish goals on a self-directed basis
- Experience leading cross-functional teams
Preferred Qualifications (Desired Skills and Experience):
- Experience in presenting data to customers, suppliers, and program and site leaders.
- Knowledge of software development and Digital Services product portfolio is preferred.
- Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
- Understanding of Safety Risk Management/Bowtie methodology.
- Experience working across the certification value stream
- Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders
- Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage
- Experience identifying web application impact due to changes in certification requirements
- Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
- Experience developing presentations and presenting to multiple levels of an organization
- Experience investigating and finding solutions to complex technical or regulatory issues
- Experience recognizing and balance conflicting priorities
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range :
- Experienced (Level 3): $114,750 - $155,250
- Senior (Level 4) $141,100 - $190,900
Applications for this position will be accepted until Mar. 21, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Aircraft Structures Mechanic to join our Join and Installation team in Everett and Renton, Washington.
As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials. You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards. Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools. You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation.
Locate work areas using specified drawings and paperwork.
Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free.
Retrieve non-kitted parts from designated areas, ensuring compliance with specifications.
Use electronic devices to access work instructions and engineering data (personal cell phones not permitted).
Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment.
Move kits, carts, and equipment within the work cell as needed.
Load/unload jigs and operate mechanical lifts for assembly work.
Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions.
Handle hazardous materials safely and dispose of them properly.
Inspect completed work for defects and cleanliness before submission for inspection.
Perform minor rework and maintain tool control in accordance with procedures.
Maintain personal and tool certifications and seek assistance from supervisors when necessary.
Set up tools and equipment for drilling and fastener installation in complex structures.
Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance.
Coordinate the movement and preparation of materials and tools for tasks.
Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards.
Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed.
Utilize calibrated tools to verify work against specifications and ensure quality.
Manage equipment and materials within the work cell to ensure efficient workflow.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.
1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to lift up to 35 pounds.
This positions requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 10, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Design, develop, test, and deploy new Digital Engineering features and capabilities for the Boeing Commercial Airplanes Product Security Engineering function
Ensure and maintain the quality of the MBSec Solution Kit (SK) models, processes, and templates
Manage PSE Digital Engineering project access control, permissions management, project structure, and to help implement related Access Control Policies
Work with PSE Enterprise and MBSec Technical Lead, Development Lead, and Scrum-Master to define and execute “releases” of the MBSec SK and other PSE Digital Engineering capabilities per the PSE Digital Engineering technical roadmap
Work with the MBSec Development Lead and Scrum-Master to define new features to add and align within the PSE Digital Engineering technical roadmap
Work with the PSE Engineering Integration Lead to align MBSec SK, and other PSE Digital Engineering tools, with defined enterprise and BCA PSE Engineering Capabilities and engineering activities
Participate in peer reviews and technical reviews related to PSE Digital Engineering features and capabilities
Manage the deployment and implementation of MBSec across multiple BCA programs for Product Security Engineering
Develop and define training materials, courses, and pathways for PSE Digital Engineering tools and capabilities.
Train and teach PSEs from across the enterprise in the use of PSE Digital Engineering tools and capabilities
Participate as a contributor to the Enterprise PSE community for Model Based Solution Kits and Design Practices
Work in and utilize agile methodologies for planning and execution of tasks across the team
Define and craft the technical capabilities roadmap for PSE Digital Engineering
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
Level 3: 5+ years of related work experience or an equivalent combination of education and experience
Level 4: 9+ years of related work experience or an equivalent combination of education and experience
Experience with Model Based Engineering tools and languages such as Enterprise Architecture, Cameo, MagicDraw, UML/SysML, 3DX, CATIA
Experience with system security engineering or systems engineering
Experience with analysis of requirements, architecture, design, and product design
Accredited degree or certificate in Systems Engineering with a focus or emphasis on Model Based Systems Engineering (MBSE)
Experience in Airplane System Development, Product Security, Cybersecurity, or Systems Security Engineering
Demonstrated history of performance in systems, systems security, or software engineering throughout the course of engineering or operations lifecycle
Highly motivated and exhibit strong written and verbal communication, inter-personal, and problem-solving skills
Experience with Model Based Engineering languages and frameworks such as UAF, DoDAF, MODAF, AADL, UPDM etc
Experience with formalized semantics and semantic modeling languages and frameworks such as RDF, OWL, SPARQL, and TTL
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Experienced (Level 3): $137,700 - $186,300
Applications for this position will be accepted until Mar. Citizen, U.National, lawful permanent resident, refugee, or asylee.
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
The Interiors of the airplane, along with the cargo compartments, exterior markings, associated systems, and cabin safety all make up Payloads. We are how our airline customers fulfill their mission and represent their brand and shape how the public experiences flight.
The Interiors Responsibility Center (IRC) is a manufacturing facility, and is a fun and exciting place for practical, hands-on engineers who like to see their ideas become reality.
IRC Payloads Design Engineers (DEs) value a hands-on approach to problem-solving. There will be frequent opportunities for collaborating with Operations, building test parts for mockups/validation, and visits to the Airplane Integration Center, Factory and Flight Line.
Leads or assist in developing, integrating, and documenting interior payload system requirements to establish the component/system design
Leads or assists in developing, maintaining, and modifying interior payload system and component designs, using design tools and/or other design methods
Communicates and collaborates with the value stream which includes multiple engineering organizations, production operations, supply chain, customers, and leadership
Leads or assists performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
Reviews engineering for soundness of designs, quality, producibility, etc.
Documents design/system requirements, design intent, lessons learned, etc. for historical and training purposes
Works cross functionally with broader team members within an IPT (Integrated Product Team) by making or help making timely sound decisions to carry the projects forward
Determines and define what is critical and what is not critical for a product and propose creative solutions to stakeholders and approvers
Bachelors of Science (or greater) from an accredited course of study, in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry
~2+ years of experience in engineering, including design, integration, and/or certification
5+ years of related work experience or an equivalent combination of education and experience
~ Experience in aerospace interiors, materials and properties, design criteria and release processes
~ Ability to manage a high volume of complex work packages diligently track milestones and ensure process steps are followed to ensure on-time performance
~ Technical writing skills
~ The candidate would ideally have a working knowledge of: ETAC (engineering tracker), ECAS, DCCS (certification trackers), CATIA V5, ENOVIA, IVT, PDM, CMES, MS Office Suite
~ Ability to work with regulatory agencies or delegates, suppliers, and customers
Union:
This is a union represented position
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies .
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Summary pay range Associate (Level 2): $96,300 - $117,700
Summary pay range Mid-Level (Level 3): $117,900 - $144,100
Applications for this position will be accepted until Mar. Citizen, U.National, lawful permanent resident, refugee, or asylee.
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington .
This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.
The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment.
Primary responsibilities:
- Provides technical guidance and training relative to complex safety and airworthiness matters
- Coordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams
- Review certification plans, write letters to regulators, and understand compliance process
- Leading cross-functional teams resulting in resolution of technical issues.
- Coordinate technical messaging and partnering with the FAA on regulatory issues
- Own, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)
- Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance
- Develop strategic action plans for changes to certification processes and execute those plans through completion
- Contribute to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans
Basic Qualifications (Required Skills and Experience):
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
- Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
- 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects
- 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
- Experience with project management and self-managing projects.
- Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees
- Ability to accomplish goals on a self-directed basis
- Experience leading cross-functional teams
Preferred Qualifications (Desired Skills and Experience):
- Experience in presenting data to customers, suppliers, and program and site leaders.
- Knowledge of software development and Digital Services product portfolio is preferred.
- Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
- Understanding of Safety Risk Management/Bowtie methodology.
- Experience working across the certification value stream
- Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders
- Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage
- Experience identifying web application impact due to changes in certification requirements
- Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
- Experience developing presentations and presenting to multiple levels of an organization
- Experience investigating and finding solutions to complex technical or regulatory issues
- Experience recognizing and balance conflicting priorities
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range :
- Experienced (Level 3): $114,750 - $155,250
- Senior (Level 4) $141,100 - $190,900
Applications for this position will be accepted until Mar. 21, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes (BCA) is looking for Quality Workplace Coaches (QWPC) to support the 737 Northline, 767, 777, Composite Wing Center (CWC), Interiors Responsibility Center (IRCWA) and Electrical Systems Responsibility Center (ESRC) teams onsite in Everett, Washington on 1st and/or 2nd shift.
Our team is currently hiring for a broad range of experience levels, including Experienced and Senior Quality Workplace Coaches.
We are looking for outgoing and knowledgeable Quality Workplace Coaches who are passionate about coaching, motivating, and inspiring others. In this role, you will support quality inspectors and oversee Structured On-The-Job activities. The ideal candidates will be Subject Matter Experts (SMEs) in various inspection methods and quality processes, with current hands-on experience and up-to-date proficiency in Non-Conformance Record (NCR) writing. Strong collaboration skills, natural coaching and leadership abilities, and a genuine talent for connecting with others are essential. Our team lives by the motto: “We Make People Awesome.”
Position Responsibilities:
Coaches Quality inspectors on best practices in inspection techniques and performance improvement, utilizing expertise in quality manufacturing and assembly across various areas such as Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System
Analyzes and interprets performance and quality data (e.g. CMES, EPES) to identify improvement opportunities
Analyzes processes and supports problem solving, develops, communicates and documents innovative solutions in support of area quality goals
Assists Quality managers and team leads with Structured On-the-Job Training (SOJT) plans and provides program/job specific advanced skills coaching
Offers Subject Matter Expertise for specific Quality skills through Workplace Coaching
Provides coaching, positive modeling, and observation opportunities to help team members excel
Encourages questions to ensure understanding and gives timely feedback on performance
Reinforces efforts and progress while clarifying expected behaviors, knowledge, and proficiency levels
Fosters good interpersonal relationships through helping team members feel valued, appreciated and included in discussions
Basic Qualifications (Required Skills/Experience):
3+ years of experience as a Quality Inspector
3+ years of experience in aerospace, fabrication, or manufacturing environment
3+ years of experience in aircraft manufacturing working with assembly processes and procedures
3+ years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications
Preferred Qualifications (Desired Skills/Experience):
5+ years of related work experience or an equivalent combination of education and experience
Bachelor’s degree or higher preferred
Quality inspection experience in three or more of these areas: Quality inspection in Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System
Proficiency with MS Office applications
Excellent analytical, communication and problem-solving skills
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
This role is primarily first or second shift; however, there may be additional shift requirements to support program objectives.
Total Rewards:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:
Experienced (Level 3): $102,500 - $114,000
Senior (Level 4): $126,000 - $140,000
Applications for this position will be accepted until Mar. 20, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.
Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.
Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.
Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.
Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.
Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.
Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.
Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.
Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.
Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.
Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.
Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.
Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.
Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.
Maintain personal and tool certifications, ensuring compliance with safety and operational standards.
Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.
1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to lift up to 35 pounds.
This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
Proficiency in reading, writing, and speaking English
Preferred Qualifications:
1+ years of experience performing aircraft structural work or equivalate.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program
Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Safety Sensitive Statement:
This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Everett, Washington.
As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations. Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical. A Color Vision Certification may be necessary for portions of this job. You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations. Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft.
Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections.
Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments.
Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment.
Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules.
Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.
Interpret and adhere to airworthiness directives, service bulletins, and other approved data.
Apply mathematical calculations to set up and use precision measuring tools for accurate measurements.
Create production aids as needed to facilitate work assignments.
Maintain necessary certifications, licenses, and permits for assigned work.
Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights up to 35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications:
3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction).
Must be willing to work any shift, including days, evenings, nights, and weekends.
Preferred Qualifications:
FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.
5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience)
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.
Safety Sensitive Statement:
This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 06, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
