Engineering Structures Jobs in Glendale Az Remote
437 positions found
C
Coating - Plasma - Supervisor - Production 1st shift
✦ New
Salary not disclosed
Chromalloy is a global engineering & solutions company. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world.
Video: What We Do
Why work at Chromalloy?
Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy!
Our Total Rewards Program is designed to support you today and in the future.
Eligibility for individual benefit plans may vary based on employment status.
Operations Management:
Personnel Management:
QualificationsTo perform this job successfully, an individual must meet below minimum requirements
List preferred job-related qualifications if different from above:
List the level of education and/or experience needed to successfully accomplish the essential duties of this job:
The salary range for this position reflects a broad spectrum of experience levels. Individual compensation within the range is determined by multiple factors, including relevant experience, education, certifications, job related skills, internal equity, and market conditions. We evaluate each candidate individually to ensure fair and competitive pay decisions.
Due to government regulation only US persons (U.S. citizen, U.S. naturalized citizen, U.S. permanent resident, holder of U.S. approved political asylee or refugee status) may be considered for this role.
Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.
Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.
Chromalloy is an equal opportunity employer - vets/disabled.
In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact:
Video: What We Do
Why work at Chromalloy?
Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy!
Our Total Rewards Program is designed to support you today and in the future.
- Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching.
- Development & progression opportunities for every employee - regular performance conversations, training and development curriculum, and engineering fellowship programs.
- Paid time off, including vacation, sick time, paid holidays, and parental leave-all eligible on your first day of employment!
- Competitive pay, including eligibility for quarterly and annual bonuses, depending on role and site.
Eligibility for individual benefit plans may vary based on employment status.
Operations Management:
- Champion perfect safety, perfect quality.
- Drive operational metrics, turn time, on time delivery, past dues, productivity
- Measure and report daily, weekly production performances data
- WIP Management, team with the planning department to drive monthly financial plan, assist in date management, level loading production.
- Clear and concise communication, across all functional teams utilizing T1, T2 boards, identifying actions to improve performance deficiencies in each operational metric.
- Maintaining stocks of materials and consumables, communicate and escalate shortages and or out of stock items.
- Clear cross shift communications, pertaining to shift deliverables, maintenance, and equipment status.
- Maintenance work orders are submitted, all production equipment are maintained and serviced appropriately
- 5s own the process, show daily progress, monthly audits, work environment is standardized.
- Shop floor presence, situational awareness, self-motivated, strategic problem solving, collaborative with functional teams.
- On time and prepared for all scheduled meetings
- Compliance with all company policies and procedures, Live the Chromalloy Values.
- Compliance with all regulatory requirements, repair station manual, quality systems manuals, department procedures.
- Production team is properly trained and adequately staffed with FAA repairmen.
Personnel Management:
- Department training at 95% or greater
- Continual development of the production team completing Tooling U and Linked-In training courses.
- Payroll approved weekly; each Monday by 9am
- Attendance and time off approved 2 weeks in advance, attendance calendar updated weekly, time off not to exceed 10%
- Providing supportive management to each team member, coach, develop and motivate, problem solve.
- Compliance with operation time standards, adjust standards when standards are too low or high.
- Allocating resources to achieve deadlines.
- Complete and present performance reviews on time, 30-60-90, 6-month and annual reviews, when necessary, development plans to acquire needed skills
- Disciplinary actions
QualificationsTo perform this job successfully, an individual must meet below minimum requirements
- Repair station and new manufacturing experience
- A&P license or previous repairmen certificate holder, can meet repairmen qualifications under 14 CFR Part 65
- Experience, direct or indirect, with aircraft component processes, machining, welding, vacuum and coating furnace, inspection, thermal spray, chemical strip, brazing, plating
- Knowledge of lean manufacturing, process improvement, 5s, Kaizen, methodologies
- Execution, management, and delivery of KPI's
- Excel, Outlook, PowerPoint proficiency, intermediate/advanced required
- Ability to navigate through multiple (ERP) platforms to obtain data.
- Support & collaborate with functional teams - HR, Safety, Engineering, Quality, Planning, Procurement, Maintenance and Customer Service.
- Strategic problem solving and organizational skills.
- Self-motivated with a high level of ownership, integrity, and accountability
- Excellent written and verbal communication skills.
- US Citizen, Lawful Permanent Resident, or Refugee (ITAR Requirement)
- Fluent in English (reading, writing, comprehension) (FAA Requirement)
List preferred job-related qualifications if different from above:
- A&P License (Current)
- Six Sigma Greenbelt/Blackbelt
List the level of education and/or experience needed to successfully accomplish the essential duties of this job:
- Associate degree/ bachelor's degree preferred.
- Four (4) years experience and/or training; or equivalent combination of education and experience
The salary range for this position reflects a broad spectrum of experience levels. Individual compensation within the range is determined by multiple factors, including relevant experience, education, certifications, job related skills, internal equity, and market conditions. We evaluate each candidate individually to ensure fair and competitive pay decisions.
Due to government regulation only US persons (U.S. citizen, U.S. naturalized citizen, U.S. permanent resident, holder of U.S. approved political asylee or refugee status) may be considered for this role.
Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.
Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.
Chromalloy is an equal opportunity employer - vets/disabled.
In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact:
Not Specified
U
Information Technology Professional
🏢 US Navy
Salary not disclosed
When warfare moves at the speed of technology, we need personnel who can always keep us one step ahead of our enemies. As an Information Professional Officer, you lead your team of Enlisted Information Systems Technicians to ensure the delivery of communications capabilities by operating, maintaining and securing our networks around the globe. Assist with top secret cyberwarfare missions and discover tactical and strategic advantages afloat and ashore. IPO is a big job, but your team will always have your back.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Information Professional Officer
More Information
Responsibilities
Information Professional Officers (IPOs) oversee the seamless operation of the global Naval network environment. Their responsibilities include:
Work Environment
Information Professionals serve in challenging roles of increasing scope and responsibility both afloat and ashore. This could include:
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Upon completion, candidates typically attend a five-week IP Basic Course of instruction in Pensacola, FL, before or during their initial assignment. IPOs must complete specific qualifications as part of their training during Fleet tours and are expected to pursue advanced education opportunities.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Information Professional Officers can advance their education by:
Postgraduate education is important to the success of the Information Professional. Most IPs will complete a master's degree in C4I, space, information systems, computer science or modeling and simulation.
There's also potential to pursue a graduate certificate, DoW certifications, federal executive fellowships and information assurance scholarships and internships.
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. Candidates seeking an Information Professional Officer position must have a bachelor's degree from a regionally accredited institution in a technical field, preferably in one of following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Science, Systems Engineering, General Engineering.
All candidates must also be: U.S. citizens, willing to serve worldwide, eligible for a Top Secret/Sensitive Compartmented Information (SCI) security clearance and qualified for sea duty.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as an Information Professional Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Information Professional Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Information Professional Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Information Professional Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as an Information Professional Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Information Professional Officer
More Information
Responsibilities
Information Professional Officers (IPOs) oversee the seamless operation of the global Naval network environment. Their responsibilities include:
- Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
- Driving interoperability with joint, allied and coalition partners
- Building professional excellence through education, training and certification and milestone qualifications
- Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
- Helping to develop and deploy information systems, command and control and space systems
- Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
- Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology
Work Environment
Information Professionals serve in challenging roles of increasing scope and responsibility both afloat and ashore. This could include:
- Serving as part of Battle Group staffs on ships at sea
- Working in C4I/Space/Surveillance on shore tours
- Serving on major Navy and joint staffs
- Serving in command of key communication and surveillance facilities around the globe
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Upon completion, candidates typically attend a five-week IP Basic Course of instruction in Pensacola, FL, before or during their initial assignment. IPOs must complete specific qualifications as part of their training during Fleet tours and are expected to pursue advanced education opportunities.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Information Professional Officers can advance their education by:
- Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
- Completing Joint Professional Military Education (JPME) at one of the various service colleges
Postgraduate education is important to the success of the Information Professional. Most IPs will complete a master's degree in C4I, space, information systems, computer science or modeling and simulation.
There's also potential to pursue a graduate certificate, DoW certifications, federal executive fellowships and information assurance scholarships and internships.
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. Candidates seeking an Information Professional Officer position must have a bachelor's degree from a regionally accredited institution in a technical field, preferably in one of following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Science, Systems Engineering, General Engineering.
All candidates must also be: U.S. citizens, willing to serve worldwide, eligible for a Top Secret/Sensitive Compartmented Information (SCI) security clearance and qualified for sea duty.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as an Information Professional Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Information Professional Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Information Professional Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Information Professional Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as an Information Professional Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Not Specified
U
Surface Warfare Officer
🏢 US Navy
Salary not disclosed
If you're a Surface Warfare Officer (SWO), you have what it takes to lead by example. Maintain and operate the most advanced fleet of ships in the world-along with the crews that support them. Your team of Sailors will look to you for guidance, so you'll need to become an expert on everything from engineering to combat systems to navigation. Communicate your mission and goals with your crew to ensure everything is smooth sailing. If you see yourself commanding a Naval ship as a Captain one day, this is the role that will get you there.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Surface Warfare Officer
More Information
Responsibilities
Surface Warfare Officers (SWOs) are involved in virtually every aspect of Navy missions. As a SWO, you may be in charge of any number of shipboard operations and activities while at sea, working with or within any of these specialized forces:
Aircraft Carrier Forces: Provide and coordinate air, submarine and surface ship defense for aircraft carriers.
Cruiser-Destroyer Forces: Provide ship attack and defensive measures with a wide array of missile and fire power capabilities, providing anti-air, -submarine and -surface warfare support.
Amphibious Forces: Embark and transport vehicles, equipment and personnel for amphibious assault operations.
Combat-Logistics Forces: Provide combatant ships with fuel, ammunition, food and supplies, and provide repair, maintenance and rescue capabilities through Fleet Support Ships.
Mine Warfare Forces: Detect, identify and neutralize threats from hostile use of maritime mines.
You may also be interested in becoming a Surface Warfare Officer within the prestigious Navy Nuclear community where you will have the opportunity to work on some of the world's most powerful nuclear-powered submarines and aircraft carriers.
Work Environment
As a Surface Warfare Officer, you will work at sea and on shore, in a variety of environments. Sea duty could place you aboard ships within the fleet. Shore duty may involve a tour of duty at the Pentagon, a student assignment at the Naval Postgraduate School in Monterey, CA, or command and management positions at shore bases and stations around the world.
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Unless they have already been commissioned through the Naval Academy or ROTC, those pursuing a Surface Warfare Officer position are required to attend Officer Candidate School. Newly commissioned SWOs can expect an advanced training process that includes comprehensive training at sea and ashore.
Newly commissioned Surface Warfare Officers will be assigned to a surface ship, leading a team of Sailors responsible for a component of the ship - anything from electronics to weapons to engineering systems. In this setting, Officers are working toward full Surface Warfare qualification.
After completing these initial sea tours, Surface Warfare Officers may be selected to serve on high-level staffs, commands or strategic projects or they may be selected to work in recruitment. The ultimate goal for many: to one day command their own ship.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Surface Warfare Officers can advance their education by:
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer.
There are different ways to become a SWO. If you're a high school student or an undergraduate, you can enter through the Naval Reserve Officers Training Corps (NROTC) or through the U.S. Naval Academy. Those already having a degree attend Officer Candidate School (OCS), a 12-week Navy school in Newport, RI.
All candidates must also be U.S. Citizens.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as a Surface Warfare Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Surface Warfare Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Surface Warfare Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Surface Warfare Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as a Surface Warfare Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Surface Warfare Officer
More Information
Responsibilities
Surface Warfare Officers (SWOs) are involved in virtually every aspect of Navy missions. As a SWO, you may be in charge of any number of shipboard operations and activities while at sea, working with or within any of these specialized forces:
Aircraft Carrier Forces: Provide and coordinate air, submarine and surface ship defense for aircraft carriers.
Cruiser-Destroyer Forces: Provide ship attack and defensive measures with a wide array of missile and fire power capabilities, providing anti-air, -submarine and -surface warfare support.
Amphibious Forces: Embark and transport vehicles, equipment and personnel for amphibious assault operations.
Combat-Logistics Forces: Provide combatant ships with fuel, ammunition, food and supplies, and provide repair, maintenance and rescue capabilities through Fleet Support Ships.
Mine Warfare Forces: Detect, identify and neutralize threats from hostile use of maritime mines.
You may also be interested in becoming a Surface Warfare Officer within the prestigious Navy Nuclear community where you will have the opportunity to work on some of the world's most powerful nuclear-powered submarines and aircraft carriers.
Work Environment
As a Surface Warfare Officer, you will work at sea and on shore, in a variety of environments. Sea duty could place you aboard ships within the fleet. Shore duty may involve a tour of duty at the Pentagon, a student assignment at the Naval Postgraduate School in Monterey, CA, or command and management positions at shore bases and stations around the world.
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Unless they have already been commissioned through the Naval Academy or ROTC, those pursuing a Surface Warfare Officer position are required to attend Officer Candidate School. Newly commissioned SWOs can expect an advanced training process that includes comprehensive training at sea and ashore.
Newly commissioned Surface Warfare Officers will be assigned to a surface ship, leading a team of Sailors responsible for a component of the ship - anything from electronics to weapons to engineering systems. In this setting, Officers are working toward full Surface Warfare qualification.
After completing these initial sea tours, Surface Warfare Officers may be selected to serve on high-level staffs, commands or strategic projects or they may be selected to work in recruitment. The ultimate goal for many: to one day command their own ship.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Surface Warfare Officers can advance their education by:
- Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
- Completing Joint Professional Military Education (JPME) at one of the various service colleges
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer.
There are different ways to become a SWO. If you're a high school student or an undergraduate, you can enter through the Naval Reserve Officers Training Corps (NROTC) or through the U.S. Naval Academy. Those already having a degree attend Officer Candidate School (OCS), a 12-week Navy school in Newport, RI.
All candidates must also be U.S. Citizens.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as a Surface Warfare Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Surface Warfare Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Surface Warfare Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Surface Warfare Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as a Surface Warfare Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Not Specified
Actuarial Analyst II (Intermediate) - P&C Personal Lines
🏢 Usaa
Salary not disclosed
Why USAA?
At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.
Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.
The Opportunity
This posting is for multiple P&C Actuarial Analyst positions on the pricing, indications, and forecasting teams. These roles require experienced analysts to independently apply actuarial methods for accurate pricing and process improvement, mentor colleagues, provide strategic insights, and manage business risks in compliance with internal risk management policies.
We offer a flexible work environment that requires an individual to be in the office 4 days per week. This position can be based in one of the following locations: San Antonio, TX, Plano, TX, Phoenix, AZ, Colorado Springs, CO, Charlotte, NC, or Tampa, FL. Relocation assistance is not available for this position.
Experienced analyst responsible for independently applying actuarial methodologies to complete structured projects and serves as a technical subject matter expert on assigned tasks.
What you'll do:
- Independently applies actuarial methodologies to complete structured projects (e.g.)
- Builds tools to test and implement new methodologies that improve accuracy of actuarial analysis; utilizes model results to select new variables and refresh existing variables in a rating algorithm; analyzes results from multiple methodologies to propose reserve selections and documenting rationale).
- Identifies and improves existing processes utilizing actuarial, mathematical, or statistical techniques.
- Proactively resolves technical issues and identifies appropriate issues for escalation.
- Assists others with troubleshooting issues.
- Creates instructions and training materials for actuarial tools and processes.
- Mentors new team members.
- Apply business acumen to provide actionable insights that help solve business problems.
- Effectively communicates insights and solutions to broad audiences including actuarial and non-actuarial stakeholders.
- Ensure risks associated with business activities are effectively identified, measured, monitored, and controlled in accordance with risk and compliance policies and procedures.
What you have:
- Bachelor's degree OR 4 years of related actuarial/business/analytical experience (in addition to the minimum years of experience required) may be substituted in lieu of degree.
- 2 years of actuarial or analytical business experience.
- 3 Casualty Actuarial Society (CAS) exams.
- Experience with relevant actuarial, mathematical, and statistical techniques and approaches used to support fact-based decision-making.
- Intermediate knowledge of data analysis tools, data visualization, developing analysis queries and procedures in Python, R, SQL, SAS, BI tools or other analysis software, and relevant industry data & methods and ability to connect technical insights to business problems.
What sets you apart:
- Familiarity with Excel and at least one programming language or modeling software package (Python, SQL, R, SAS, etc.).
- Demonstrated experience with basic actuarial pricing methodologies.
- Demonstrated experience aggregating and analyzing data to solve problems.
- Ability to effectively communicate insights and solutions to broad audiences including actuarial and non-actuarial stakeholders.
- P&C Personal Lines pricing experience.
- Familiarity and experience with industry pricing software such as Earnix.
- US military experience through military service or a military spouse/domestic partner.
Compensation range: The salary range for this position is: $77,120 - $138,810.
USAA does not provide visa sponsorship for this role. Please do not apply for this role if at any time (now or in the future) you will need immigration support (i.e., H-1B, TN, STEM OPT Training Plans, etc.).
Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.
Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.
For more details on our outstanding benefits, visit our benefits page on .
Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.
USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Not Specified
Client Services Part-Time Internship
$21.68
Position Type: Regular
Your opportunity
Your opportunity
At Schwab, your potential isn’t just recognized — it’s developed. Here, bold ideas and genuine curiosity fuel meaningful careers, empowering you to challenge the status quo and help shape the future of financial services.
Our Aspiring Talent Academy (ATA) is a part‑time, immersive internship program designed exclusively for college students who want real‑world experience while building the foundation for a long‑term career in our Client Service & Support (CS&S) organization. Through our C.A.R.E.E.R.S. curriculum — Collaboration, Academic learning, Real‑world Education & Experience, Roundtables, and Shadowing — you’ll gain hands‑on exposure to the business and learn what it truly means to serve clients “Through Clients’ Eyes.”
As an ATA Financial Services Apprentice , you’ll take inbound client calls, help solve meaningful financial questions, and learn how to navigate a wide range of service needs — all while receiving the support, coaching, and training you need to succeed. You’ll grow your confidence, sharpen your communication skills, and become part of a collaborative team committed to helping clients — and each other — own their financial futures.
This experience isn’t just a role — it’s your first step toward a future career at Schwab.
Key features of the program:
- Real client experience.
Build confidence by assisting clients through inbound service calls and applying Schwab’s client‑first approach. - Structured training, support, and coaching.
Develop through hands‑on training, ongoing mentorship, and dedicated manager coaching designed to strengthen your skills and readiness. - Exposure to the financial services industry.
Gain practical understanding of markets, products, and the client service environment while exploring career pathways within CS&S. - High‑impact professional development.
Participate in resume and interview coaching, skill‑building workshops, and other growth-focused activities to prepare for future roles. - Collaborative team culture.
Engage in team‑building events, daily huddles, and cross‑team interactions that strengthen connection and support. - Interactive, hands‑on learning experiences.
Compete in simulated trading using Schwab’s thinkorswim platform and apply what you learn in real-time scenarios. - Capstone project to senior leaders.
Demonstrate your learning and impact by presenting a final project to Schwab business leaders at the conclusion of the program.
Schwab’s Client Service & Support team is at the heart of our firm’s commitment to helping clients own their financial future. If you’re interested in pursuing a career in finance, enjoy working in a collaborative team setting, and share our passion for serving clients - this role is for you.
The Aspiring Talent Academy is for individuals who share our passion for providing outstanding customer service, want structured training in the financial industry, and are ready to hone their communication skills while collaborating with peers in a supportive environment.
Compensation: $21.68/hour
What you haveIf you’re not a finance expert, that’s okay! We celebrate diverse experiences and skillsets. Success candidates bring with them a growth mindset, willingness to learn, and a passion for serving others. Here at Charles Schwab, we strive to make a difference in people's lives through our innovative solutions and world-class service.
Required qualifications:
This is a part-time apprentice function supporting Client Service & Support (CS&S) Core Service intended for an 8-month period during your Fall and Spring Semesters. Timing and commitment to our Apprentice program will be determined by individual performance and/or business need. At the end of the Apprentice program, based on performance, graduation and/or business need, you may have the opportunity to apply for a full-time Financial Service Representative position.
- Enrollment in a university program and be able to apply and if selected, start full-time employment on or about May 2027
- Ability to work on-site starting Monday, September 14, 2026, and continuing through Friday, April 30, 2027
- Ability to work 20 hours on-site at one of the Schwab service center locations during the following times:
- Monday – 8am to 4:30pm
- Wednesday – 8am to 4:30pm
- Friday – 8am to 12pm
Preferred qualifications:
- Demonstrates a strong desire to learn and build a long‑term career in financial services , with curiosity, initiative, and a growth mindset.
- Delivers exceptional, client‑centric service , showing genuine passion for helping investors and improving the client experience.
- Communicates with clarity and confidence , with excellent written, verbal, and interpersonal skills.
- Thrives in fast‑paced, dynamic environments , adapting quickly to market shifts, new information, and evolving business needs.
- Brings a resourceful, innovative, and solutions‑oriented mindset , consistently looking for better ways to work and the courage to ask “why.”
- Collaborates effectively across teams , contributing to a positive, supportive, and partnership‑driven culture.
- Shows leadership behaviors at every level , including optimism, professionalism, strong awareness, and a purpose‑driven approach to daily work.
#campus
What’s in it for you
At Schwab, you’re empowered to shape your future. We champion your growth through meaningful work, continuous learning, and a culture of trust and collaboration—so you can build the skills to make a lasting impact. Our Hybrid Work and Flexibility approach balances our ongoing commitment to workplace flexibility, serving our clients, and our strong belief in the value of being together in person on a regular basis.
We offer a competitive benefits package that takes care of the whole you – both today and in the future:
- 401(k) with company match and Employee stock purchase plan
- Paid time for vacation, volunteering, and 28-day sabbatical after every 5 years of service for eligible positions
- Paid parental leave and family building benefits
- Tuition reimbursement
- Health, dental, and vision insurance
permanent
Principal Mechanical Integration Engineer - DCI Pipes, Frames and Structures (REMOTE)
Salary not disclosed
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
permanent
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded