Engineering Structures Jobs in Glastonbury
111 positions found — Page 3
CNC Machinist (2nd shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.
Position Requirements
TYPICAL DUTIES:
Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.
Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.
Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.
Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.
Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.
Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
Must be capable & willing to assist or train other employees in this or lower classifications as needed.
Refer difficulties to leader or supervisor as appropriate
May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Shift
-not applicable-
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00005
Position
All Around Machinist - A
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Aerospace Deburr Specialist (1st Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
In an assigned area or cell, under general supervision perform complex polishing and finishing operations of exacting tolerance on production or overhaul and repair parts. Parts are typically at or near final stages of the manufacturing process, with tight tolerance limits, requiring intense period of concentration for extended periods of time.
TYPICAL DUTIES:
- Work from drawings, sketches, computer-generated information and verbal instructions to plan the polishing, finishing or re-work operation to be performed.
- Must be capable of following standard finishing applications in order to achieve dimensional integrity and required finish characteristics.
- Must have comprehensive understanding of the material characteristics being worked on in order to determine the appropriate wheel, grit, compound or abrasive texture to use in order to achieve desired finish and dimension.
- Perform precise chamfering operations on parts, without damaging other critical part dimensions
- Work from quality review and corrective work documents to repair or rework parts.
- Use precision measuring instruments in order to gage various critical dimension and tolerance limits, in accordance with established parameters or blue print requirements.
- Performs temporary part marking and In process transfer marking operations using Vibro Engraving, Electro-chemical Etch, or Ink Stamp, methods with suitable legibility to meet drawing or customer specification requirements
- Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
- Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
- Refer difficulties to leader or supervisor as appropriate.
- May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00001
Position
Finishing Specialist B
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Job Title: Product Manager (Beazley Digital - API/Services)
Division: Beazley Digital
Reports To: As per Beazley's organisation chart
Key Relationships:
Head of Digital Underwriting, Head of Digital Operations
Within Beazley:CIO, other senior IT Leads, Head of PMO/VRF, Enterprise Architect, Other Product/Project Managers, Commercial Management, Information Security, External Suppliers
Job Summary:
The product manager is accountable for the technology roadmap, design, development, enhancement, delivery, and budgeting for the digital product /technologies they lead. Ensuring technology is aligned to business value, OKRs and target architecture. The role ensures the technology is developed and maintained using sound business and technology management practices and it supports business transformation by enabling new capabilities and growth. Using agile and product management methods to ensure you are "delivering the right thing" in "the right way".
Key Responsibilities:
End-to-end Delivery & Execution
Own end-to-end delivery of product/technology initiatives, ensuring alignment from discovery through deployment and ongoing optimisation.
Define clear delivery outcomes, success measures and release plans in partnership with Product, Change, Engineering and business stakeholders.
Lead prioritisation and execution across the delivery lifecycle, balancing strategic objectives with operational needs.
Ensure teams remove blockers, maintain delivery momentum and operate with high transparency on progress, risks and dependencies.
Champion agile ways of working, continuous delivery and automation to accelerate time to value.
Oversee quality assurance, testing and release management to ensure secure, high-quality, production ready outputs.
Drive postlaunch monitoring, analytics and continuous improvement to maximise product value and performance.
Strategy and Business Management
Develop and maintain a strategic product roadmap aligned to OKRs and business plans.
Partner with the business owner and key users to assess current and future needs and shape multiyear plans.
Continuously refine governance and decision-making processes across run, grow and transform activity.
Build, develop and retain a high performing technology delivery team.
Work with digital leadership to define cost and resourcing models and support effective demand planning.
Budget Management
Collaborates with the digital leadership team and business owner to make funding and resource reallocation decisions.
Manages the product budget including run, growth and transform, makes informed and dynamic investment prioritization decisions supported by data.
Technology Management
Work with Group Technology, Information Security, Data Management and Architecture teams to align and leverage enterprise architecture.
Oversee day-to-day technology operations and drive continuous improvement in performance, security, availability and usability.
Define and track channel KPIs to improve adoption, performance and user experience.
Coordinate with other product managers to avoid duplication and manage interdependencies.
Manage vendor relationships in line with group frameworks and build strategic partnerships aligned to Beazley Digital's OKRs.
Embed industry standards and practices such as Agile, DevOps, InfoSec and modern data architecture to ensure resilience and agility.
Digital Transformation
Act as the technology contact for the product, partnering with cross functional teams to evolve processes and operating models.
Scale innovation and new insurance propositions into the channel where feasible.
Recommend business process, commercial and UX improvements to enhance adoption.
Apply design thinking, customer journey mapping and data insights to drive end-to-end channel value.
Identify and champion emerging business and technology trends that support channel OKRs.
Contribute to embedding digital opportunities into Beazley Digital's strategy to drive growth, efficiency and risk reduction.
General:
It is important that within all your interactions both internally and externally you adhere Beazley's core values - Being Bold, Striving for Better, and Doing the Right Thing as they contribute to an internal environment of teamwork and promote a positive brand image and experience to our external customers. We also expect Beazley employees to:
- Comply with Beazley procedures, policies and regulations including the code of conduct which incorporates the PRA and FCA Conduct.
- Undertake training on Beazley policies and procedures as delivered by your line manager, the People & Sustainability or assurance teams (compliance, risk, internal audit) either directly, via e-learning or the learning management system.
- Display business ethics that uphold the interests of all our customers.
- Ensure all interactions with customers are focused on delivering a fair outcome, including having the right products for their needs.
- Comply with any specific responsibilities necessary for your role as outlined by your line manager, the People & Sustainability or assurance teams (compliance, risk, internal audit) and ensure you keep up to date with developments in these areas. This may include, amongst others, Beazley's underwriting control standards, Beazley's claims control standards, other Beazley standards and customer relationship management.
- Carry out additional responsibilities as individually notified, either through your objectives or through the learning management system. These may include membership of any Beazley committees or working groups.
Personal Specification:
Education and Qualifications
Product Management or Product Owner certification desirable but not essential
Agile certification desirable but not essential
Skills and Abilities
Strong business understanding and ability to work in partnership with the business
Strong Technology Product Management skills and/or Programme Management skills
Demonstrated ability to manage technology and business change projects with demonstrated delivery of business value and pursuit of quality
Experienced in change management, able to understand and advise on how to implement process, technology and people changes while minimising the delivery risks
Understanding of business strategy and the work of the teams within the customer organisation
Able to identify and help the team assess options and solutions that best fit business requirements
Proven team management and leadership capability within a change and technology context
Knowledge and Experience
Previous experience in technology
Previous experience in budget management
Previous experience of delivering multiple, complex IT projects, preferably covering the use of internal resources, third party (packaged) solutions and outsourced services
Previous experience of the use of various analysis and delivery frameworks covering scope definition, planning, budgeting, reporting, management of risks and issues
Previous experience working with an Agile methodology preferred
Previous experience building and maintaining effective working relationships
Previous experience managing an outsourced team
Aptitude and Disposition
Delivery focussed, self-motivated, flexible and enthusiastic
Relentless curiosity
Learning Agility
Open Disposition
Judgement
Digital Acumen
Customer focus
Strategic thinking
Competencies
Proactive
Information seeking
Flexible
Detail oriented
Purposeful communication
Leadership
Team working
Negotiation and influencing
Problem solving
Customer focus
Decision making
Who We Are:
Beazley is a specialist insurance company with over 30 years' experience helping people, communities and businesses to manage risk all around the world. Our mission is to inspire our clients and people with the confidence and freedom to explore, create and build - to enable businesses to thrive. Our clients want to live and work freely and fully, knowing they are benefitting from the most advanced thinking in the insurance market. Our goal is to become the highest performing sustainable specialist insurer.
Our products are wide ranging, from cyber & tech insurance to marine, healthcare, financial institutions and contingency; covering risks such as the weather, film production or protection from deadly weapons.
Our Culture
We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 2,000 of us working around the world.Employee's diversity,experience and passion allow us to keep innovating and moving forward, delivering the best. We are proud of our family-feel culture at Beazley that empowers our staff to work from when and where they want, in an adult environment that is big on collaboration, diversity of thought and personal accountability. Our three core values inspire the way we work and how we treat our people and customers.
- Be bold
- Strive for better
- Do the right thing
Upholding these values every day has enabled us to become an innovative and responsive organization in touch with the changing world around us - our ambitious inclusion & diversity and sustainability targets are testament to this.
We are a flexible and innovative employer offering a friendly, collaborative, and inclusive working environment. We actively encourage and expect applications from all backgrounds. Our commitment to fostering a supportive and dynamic workplace ensures that every employee can thrive and contribute to our collective success. Explore a variety of networks to assist with professional and/or personal development.
Our Employee Networks include:
- Beazley RACE - Including, understanding and celebrating People of Colour
- Beazley SHE - Successful, High potential, Empowered women in insurance
- Beazley Proud - Our global LGBTQ+ community
- Beazley Wellbeing - Supporting employees with their mental wellbeing
- Beazley Families - Supporting families and parents-to-be
We encourage internal career progression at Beazley, giving you all the tools you need to drive your own career here, such as:
- Internal Pathways (helping you grow into an underwriting role)
- iLearn (our own learning & development platform)
- LinkedIn Learning
- Mentorship program
- External qualification sponsorship
- Continuing education and tuition reimbursement
- Secondment assignments
The Rewards
- The opportunity to connect and build long-lasting professional relationships while advancing your career with a growing, dynamic organization
- Attractive base compensation and discretionary performance related bonus
- Competitively priced medical, dental and vision insurance
- Company paid life, and short- and long-term disability insurance
- 401(k) plan with 5% company match and immediate vesting
- 22 days PTO (prorated for 1st calendar year of employment), 11 paid holidays per year, with the ability to flex the religious bank holidays to suit your religious beliefs
- Up to $700 reimbursement for home office setup
- Free in-office lunch, travel reimbursement for travel to office, and monthly lifestyle allowance
- Up to 26 weeks of fully paid parental leave
- Up to 2.5 days paid annually for volunteering at a charity of your choice
- Flexible working policy, trusting our employees to do what works best for them and their teams
Salary for this role will be tailored to the successful individual's location and experience. The expected compensation range for this position is $85,000 - $107,000 per year plus discretionary annual bonus.
Don't meet all the requirements? At Beazley we're committed to building a diverse, inclusive, and authentic workplace. If you're excited about this role but your experience doesn't perfectly align with every requirement and qualification in the job specification, we encourage you to apply anyway. You might just be the right candidate for this, or one of our other roles.
Final Inspection Apprentice
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspection Apprentice position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00034
Position
Final Inspection Apprentice
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Cost Accountant (Aerospace Industry)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Accountability:
The Cost Accountant is responsible for the compilation of cost information for products and services for a specific job or project. Key responsibilities will encompass the investigation of costs that differ from expectations, assisting in resolving those differences and preparing reports. The primary charge of this position will be to bring a higher level of operational effectiveness by streamlining and consolidating processes and systems. They will do this by investigating and analyzing current situations and recommending cost-effective solutions or improvements. In addition, they will analyze and prepare complex financial and business information, in support of various functional groups. Analyze a variety of financial documents, perform technical studies, and forecast trends impacting financial activities. Propose and introduce improvements to enhance customer satisfaction and the group's effectiveness. The location Controller will look to the Cost Accountant to provide accurate information upon which critical decisions will be based. In this role you will interface with all departments at various levels. More specific responsibilities include but will not be limited to the following:
- Plan and conduct investigations, audits and analyses of a variety of financial information used in the preparation of budgets, forecasts, business plans, prices, costs of products, services and operations, and prepare reports and recommendations.
- Review data and consult with governmental, customer and operating personnel to obtain financial information. Select or devise techniques to ensure optimal analysis of financial elements.
- Conduct or coordinate special studies and investigations, and recommend measures to achieve resolution of complex and controversial financial problems. Continually review operations to reduce impact of potential problems and to take advantage of opportunities to achieve cost savings and improve customer satisfaction.
- Design, establish, modify, verify and implement cost-effective and responsive programs to meet financial requirements, including a system of checks and balances to safeguard the Company's assets, particularly inventory.
Position Requirements
- Bachelor's degree in Accounting or related field. Alternatively, a special combination of education and experience and/or demonstrated accomplishments.
- Must have 5-8+ years of cost accounting management experience in a manufacturing environment. Aerospace industry preferred.
- Requires a thorough knowledge of cost accounting policies and procedures.
- The ability to effectively interpret cost accounting operating statistics
- Conduct independent investigations and resolve complex cost accounting problems.
- High degree of business acumen
- Strong communication skills in order to interface effectively with other groups, influence decisions and achieve agreement on complex cost accounting matters
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Accounting/Finance
Req Number
ACC-25-00006
Position
Cost Accountant
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Machinist - Turning 1st/2nd shift
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.
Responsibilities:
- Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
- Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
- Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining or two years of CNC experience.
- Aerospace experience preferred.
- Basic understanding of math or industrial mathematics.
- Good written and verbal skills.
- Basic computer skills.
- Ability to read technical drawings.
- Ability to set, use or setup various measuring devices.
- Solid problem solving skills.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Operations
Req Number
OPE-25-00003
Position
CNC Machinist - Turning
Close Date
Post Internal Days
0
Number of Openings
2
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
Final Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Position Requirements
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Shift
Days
Full-Time/Part-Time
-unspecified-
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00032
Position
Final Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Machinist (1st Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.
Position Requirements
TYPICAL DUTIES:
Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.
Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.
Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.
Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.
Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.
Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
Must be capable & willing to assist or train other employees in this or lower classifications as needed.
Refer difficulties to leader or supervisor as appropriate
May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Shift
-not applicable-
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00002
Position
All Around Machinist - A
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Production Expeditor
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
ACCOUNTABILITY:
This position includes acting as a change agent in developing, introducing, and administering new or assigned suppliers, related to purchasing matters. It also consists of implementing measures to improve company/supplier relations, and ensuring compliance with related contracts or agreements.
This position deals with day-to-day handling of time critical customer product, at times requiring independent action, as well as the ability to follow specific guidelines in administration of contracts or agreements.
TYPICAL DUTIES (May include, but are not limited to the following):
- Establishing contacts and releasing PO's with suppliers, identification and qualification of new sources of suppliers, quoting, supply side monitoring of suppliers: lead-times, capacity, delivery, cost, quality, reverse auction.
- Coordinating with MRO/tooling & product suppliers on the supply needs (requires interaction with division managers.
- Execution and interaction in material supply chain coordination within the division and with external suppliers.
- Identifying and planning integration of MRO materials and supplies into the shop based on knowledge of the kanban replenishment issues.
- Managing the shipping and receiving aspects within the division, calling in outside trucking firms, managing day to day shipping requirements.
- Provide and request information from suppliers, vendors, transportation specialists and other sources, as applicable.
- Review data and information, conduct basic analyses and provide assistance to more experienced staff in more complex matters.
- Review terms and conditions of contracts and agreements to determine compliance with regulations and Company policy.
- Work closely with other groups involved in various aspects of supply chain management and transportation to ensure meeting schedules, and inform senior staff of potential problems.
- Strive for continuous improvement in such matters as cost, quality, and responsiveness to customers.
- Inventory management: determining inventory requirements and maintaining adequate stocks and supplies.
- Developing and implementing state of the art methods and practices to reduce requirements for storage facilities and space and reduce associated costs.
COMPLEXITY OF TASKS:
Under supervision, perform routine duties in support of Purchasing and Logistics. Requires strong working knowledge of computer based programs, and ability to communicate effectively and resolve routine problems. Requires basic understanding of standard supply management and transportation functions and of related policies. Requires interfacing and effective communication with other groups regarding various aspects of the procurement process.
Position Requirements
Experience in Aerospace industry preferred.
Associate Degree or 2 to 5 years of related experience, or a combination of education and experience, and/or demonstrated accomplishments
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00007
Position
Production Expeditor
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Accounts Payable Specialist
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Client Organization Scope:
- $150m+ Revenue
- 300+ vendors in AP system
- 80-85% of invoices are PO-related and require 3-way match
- Multi-site responsibility
Accountability:
Owns execution of full-cycle Accounts Payable process. Prepares and processes all accounts payable according to terms, resolving any discrepancies between PO/Receiver/Invoice as needed with limited supervision. Corporate Credit Card reconciliation and follow up on delinquent submissions.
Duties/responsibilities include, but are not limited to the following:
- Must have experience in a Manufacturing environment
- Performs 3-way match of PO, receiver and invoices
- Contacts vendors as needed to request statements and resolve any issues or respond to their inquiries; Assists in resolution of complaints between vendor and customer
- Communicates with buyers on PO discrepancies
- Distributes non-PO invoices for approval
- Processes corporate purchasing credit cards
- Prepares weekly vendor payments by check and ACH; prepares Positive Pay and ACH files for uploading to bank site
- Controls check signatures and distribution to vendors
- Responsible for following up on outstanding "uncashed" checks
- Maintains W-9 documents for all vendors to accurately produce annual 1099s
- Assists with annual financial audits
- Assists accounting staff in the month end close process; ensure that all invoices are posted in the appropriate fiscal month and all invoices that have not yet been received are properly accrued for.
- Maintain accurate and complete records for all accounts payable transactions
- Participates in training and instruction as directed
- Reviews Accounts Payable Aging and Goods Received and Not Invoiced reports for accuracy maintaining GRNI under 90 days of receipt.
The above listed responsibilities are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all responsibilities or duties required. Incumbents will be expected to perform other duties as assigned.
Position Requirements
Qualifications:
- Associate's Degree in Accounting or comparable work experience; 3+ years'
- Must have experience in a Manufacturing environment
- Minimum of 2 years of full-cycle Accounts Payable experience
- Proficiency in Microsoft Excel, Word and Outlook software applications, knowledge of Epicor a plus
- Working knowledge of chart of accounts for proper general ledger coding.
- Demonstrated time management skills with good attention to detail
- Ability to interact effectively with people at all levels of the organization
- Ability to work independently to identify and resolve exceptions and discrepancies
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Accounting/Finance
Req Number
ACC-25-00007
Position
Accounts Payable Specialist
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
