Engineering Structures Jobs in Farmers Branch
155 positions found — Page 5
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
The SMT Engineering Tech will be responsible for supporting the surface mount technology (SMT) production lines, ensuring efficient operation, high-quality output, and continuous improvement through troubleshooting, maintenance, and process optimization.
Job Responsibilities
- Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
- Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
- Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
- Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
- Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
- Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
- Maintain accurate records of equipment maintenance, process parameters, and production issues.
- Adhere to all safety protocols and quality standards within the SMT department.
Job Qualifications
- Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
- Minimum of 2-4 years of experience working with SMT production lines and equipment.
- Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
- Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
- Ability to read and interpret technical drawings, schematics, and process specifications.
- Excellent problem-solving skills and a methodical approach to troubleshooting.
- Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
- Ability to work independently and as part of a team in a fast-paced manufacturing environment.
- Familiarity with IPC standards (e.g., IPC-A-610) is a plus.
The SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets.
Job Responsibilities
- Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
- Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
- Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
- Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
- Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
- Document all maintenance activities, repairs, and process changes accurately and thoroughly.
- Participate in root cause analysis for production defects and implement effective solutions.
- Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
- Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
- Flexibility to work night shifts, including weekends and holidays as required.
Job Qualifications
- Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
- Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
- Strong understanding of SMT processes, equipment operation, and common defects.
- Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
- Ability to read and interpret schematics, technical drawings, and equipment manuals.
- Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
- Familiarity with IPC standards and quality control principles.
- Excellent problem-solving skills and attention to detail.
- Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
- Proficient in using standard hand tools, diagnostic equipment, and computers.
- Ability to lift up to 35 lbs and stand for extended periods.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide.
Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.
Job Title: Technical Project Manager – Data Center Power/Thermal
Location: Plano, Department: Data Center SBP
We are looking for a skilled Technical Project Manager – Data Center Power/Thermal to lead power and cooling infrastructure projects, providing technical oversight, managing cross-functional teams, and ensuring project success from inception to completion.
Key Responsibilities:
- Project Leadership & Execution: Plan, manage, and oversee power/thermal infrastructure projects from inception to completion, ensuring timely delivery and quality standards are met.
- Technical Oversight: Apply expertise in power supply, power distribution, and thermal management to guide technical decisions, validate designs, and optimize system performance.
- Stakeholder Management: Serve as primary technical contact person for strategic customers and internal teams. Coordinate with sales, engineering, and service teams to drive project success.
- Site Management & Quality: Conduct site evaluations, oversee installation quality, and ensure compliance with specifications and standards. Position requires up to 30% travel.
- Financial Management: Develop and control project budgets, track expenses, maintain target margins, and implement risk mitigation strategies to ensure project success.
- Vendor Coordination: Build and manage supplier relationships, evaluate proposals, and optimize procurement strategies to enhance project efficiency and value.
- Project Controls: Maintain comprehensive project documentation, oversee technical submittals, and provide regular updates on project performance and financial metrics.
Required Qualifications:
- Education: Bachelor's degree in Mechanical or Electrical Engineering (or equivalent experience)
- Experience: 5 years or more managing power infrastructure or mission-critical facility projects
- Technical Knowledge: Demonstrated experience with:
- Power supply and power distribution
- Cooling systems and thermal management
- Energy efficiency optimization
- Data center operations
- Tools: MS Office Suite and proficiency in project management software (Procore, MS Project, Jira, or similar)
- Leadership: Proven ability to manage cross-functional teams and engage diverse stakeholders
- Skills: Strong analytical and problem-solving capabilities with ability to adapt to changing priorities
Preferred Qualifications:
- Experience in supporting colocation, hyperscale, enterprise data center business
- Professional Certifications: PMC, PE, DCEP, or ATD
- Knowledge: Familiarity with New Product Introduction (NPI) processes
Salary is within 120-150k along with Bonus
Our client is seeking a Product Manager Associate to support key initiatives within their banking products team. This role will focus on building and enhancing product capabilities while supporting the ongoing Apple Card transition. The ideal candidate will bring strong product management experience, a data-driven mindset, and familiarity with consumer banking products such as savings and checking accounts.
Key Responsibilities:
- Partner with Engineering, Legal, and Compliance teams to design and implement new product features.
- Lead Agile product development processes, including backlog grooming, sprint planning, and user story development.
- Gather and analyze stakeholder feedback to inform product enhancements and prioritization.
- Track and monitor key performance metrics and outcomes to measure product success.
- Develop and maintain control frameworks, processes, and procedures for owned product areas.
- Support projects focused on automation of large data sets and operational processes, including customer outreach initiatives.
- Collaborate cross-functionally to ensure product initiatives are delivered successfully from concept through launch.
Required Qualifications:
- Prior Product Management experience delivering initiatives from planning through launch.
- Strong ability to collaborate with cross-functional stakeholders across engineering, legal, and compliance teams.
- Experience working with data and analytics to drive product decisions.
Preferred Qualifications:
- Background working with consumer banking products, such as savings accounts, checking accounts, or transfers.
- Experience supporting financial services or fintech products.
- Familiarity with Agile product development environments.
*This role is 80% Remote*
Optomi, in partnership with a leader in the Commercial Real Estate and Investments industry, is looking for a Product Manager with 3-5 years experience being user-focused!
The Product Manager will be responsible for driving user-focused product development for a new platform aimed at valuation professionals. This role involves replacing a legacy application and working with AI to enhance workflows, data integrations, and report writing. The successful candidate will have a strong understanding of user needs, adept at translating feedback into actionable user stories, and will collaborate across UX, engineering, and business teams to deliver impactful solutions.
What the right candidate will enjoy:
- Collaborative work environment with opportunities to challenge ideas
- Involvement in cutting-edge AI initiatives
- Potential to grow into senior roles
What type of experience does the right candidate have:
- 3-5 years as a 'pure product manager'
- Strong user advocacy and customer interaction skills
- Ability to understand user needs and pain points.
- Experience with Azure DevOps for backlogs and Power BI for dashboards.
- Experience with Agile methodologies
What the responsibilities are of the right candidate:
- Engage with users to identify needs and pain points
- Use data systematically to uncover opportunities and track product performance
- Collaborate with UX, engineering, and business teams to deliver AI-first capabilities
- Lead Agile ceremonies and manage product backlog
- Deliver measurable, incremental value to users and the business
Who We Are:
Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across five continents. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide.
Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies, and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2021, Delta was also recognized by CDP with leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.
What you would be doing:
Ensures manufacturing and assembly processes/procedures utilized by Contract Manufacturers meet product quality and reliability requirements.
Tracks ongoing quality and yield performance to drive improvement activities.
Evaluates new product designs for manufacturability.
Assists Contract Manufacturers with problem identification, root cause analysis, and corrective action identification, verification, and implementation.
Implements quality plans for rapidly transitioning products into manufacture.
Determines acceptability of product from subcontractors and internal operations.
Supports quality system development and implementation to applicable codes and standards such as ISO9001, etc.
Performs, documents and track results of internal audits.
Generates, evaluates and tracks corrective action requests.
Inspects and evaluates material and product quality according to internal process and procedures.
Assists in training of company personnel.
Interfaces with customers for quality activities
.
What we require (Skills and Background):
- Bachelor’s degree in engineering, Electronics or related discipline or equivalent desired
- Four to six years of previous quality assurance experience in the electronics or power industry required.
- Previous experience working with an ISO-9001 quality assurance program required
- Automotive background experience (IATF 16949 Automotive Quality Management System in particular) to support EV business.
- Core Quality and Engineering Tools (QMS, PPAP, APQP, FMEA, SPC, MSA, QCP, PMP)
- Quality metrics and driving metrics improvement (Yield, Cpk, GR&R, Scrap, MRB, DPPM
- Knowledge of statistical techniques and demonstrated ability to review and approve test plans, qualification reports, drawings, documents
- Quality Control Analysis; conducting tests and inspections of products, services, or processes to evaluate quality or performance.
- Monitoring/ Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
- Demonstrated advance proficiency with computer software to include MS Office (Word and Excel) and e-mail
Desired Skills:
Auditor or Lead Auditor Certification or Certified Quality Engineer is preferred.
ISO14001:2015 Environmental Management Systems, ISO 45001 Health, and Safety Management is a plus.
Delta SQMS (Smart Quality Management System) experience
Smart IQC
MES (Manufacturing Execution System)
What you will experience at Delta:
You will be joining one of the world’s leaders in technology as they grow their presences in North America. This role offers a competitive salary package, comprehensive benefits, and the opportunity to work with a dynamic team in a fast-paced and innovative environment. If you are a self-starter with a passion for technology and a commitment to customer satisfaction, this is the job for you.
