Engineering Structures Jobs in Ellenton Florida Remote

430 positions found — Page 2

Outside Sales / HVAC Sales
✦ New
Salary not disclosed
Bradenton, FL 1 day ago
Company Name

Unique Services

Overview

Pay: $100k - $200k+ annually based on performance (average compensation range of top performers) Full-time, year-round work

Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience.

What We Offer:

  • Warm leads no cold-calling, no canvassing
  • Uncapped commission structure
  • Weekly settlements (draw or commission after training)
  • Take-home vehicle, gas card, phone, and laptop provided
  • Insurance available after 31 days
  • Low-cost medical (as low as $5/week)
  • Dental, vision, HSA/FSA
  • 401(k) with company match
  • 13 days PTO + 8 paid holidays
  • Company-paid life insurance
  • Ongoing training and leadership development
Responsibilities

Meet with residential homeowners to assess their comfort needs and present tailored HVAC system solutions. You'll represent ARS in a consultative sales role with strong install support, fast turnaround, and industry-leading warranties. All leads are company-generated and pre-set.

Qualifications

What You Need:

  • Prior residential in-home sales experience
  • One-call-close experience strongly preferred
  • HVAC knowledge preferred (required in some locations)
  • Valid driver's license with clean driving record
  • Must pass background check and drug screening
  • Ability to enter attics, crawlspaces, and work evenings/weekends as needed
  • Excellent communication and customer engagement skills

Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Not Specified
Superintendent
🏢 Hays
Salary not disclosed
Sarasota, FL 2 days ago

About the job

Your new company

Join a respected general contractor with a strong reputation for delivering high‑quality ground‑up commercial projects across Southwest Florida. Backed by a healthy project pipeline and a culture centered around teamwork, innovation, and professional growth, this company offers long‑term stability and meaningful advancement opportunities for experienced field leaders.


Your new role

As a Superintendent, you’ll oversee day‑to‑day onsite construction activities from site prep through turnover. You’ll manage field operations, ensure schedule and quality compliance, coordinate subcontractors, enforce safety standards, and represent the company professionally onsite. This role requires strong leadership, problem‑solving, and technical expertise to deliver projects safely, on time, and to a high standard.


What you’ll need to succeed

  • Minimum 5 years of experience as a Superintendent in commercial construction
  • Strong preference for ground‑up project experience
  • Proven ability to lead field operations, manage subcontractors, and maintain schedules
  • Strong understanding of plans, specifications, inspections, and jobsite safety
  • Proficiency with construction software (Procore or similar)
  • Excellent communication and leadership skills
  • Ability to oversee all phases of onsite construction activity


What you’ll get in return

  • Competitive base salary
  • Comprehensive benefits package (medical, dental, vision, 401(k))
  • Vehicle allowance and fuel reimbursement
  • Performance‑based bonus structure
  • Opportunity to run high‑profile projects in Sarasota
  • Clear growth path and long‑term stability within a respected GC


What you need to do now

Apply! All resumes and conversations are held in strict confidence.

Not Specified
Engineering Operations Manager
Salary not disclosed
Palmetto, FL 1 week ago

Engineering Operations Manager – Electrical / Switchgear Design

Palmetto, FL (Onsite)


A growing engineering and manufacturing organization is seeking an Engineering Operations Manager to lead a team responsible for the design and development of low-voltage switchboards and electrical distribution equipment.


This role will oversee switchboard design operations, guide a team of engineers and designers, and drive improvements in product quality, reliability, and manufacturability while partnering closely with manufacturing and product teams.


Why This Opportunity

This organization is a nationally recognized design-build contractor with projects across the United States. The company continues to expand its engineering and manufacturing capabilities and offers a collaborative culture focused on innovation and employee development.


Employees benefit from a strong workplace culture with amenities including onsite fitness facilities, chef-prepared meals, employee events, and wellness resources, along with competitive benefits and growth opportunities.


Key Responsibilities

  • Lead, mentor, and develop a team of switchboard designers and engineers
  • Oversee engineering design activities for low-voltage switchboards, junction boxes, busways, and related electrical assemblies
  • Drive continuous improvement in product design, quality, reliability, and manufacturability
  • Review and approve design packages, one-line diagrams, wiring diagrams, and Bills of Materials (BOMs)
  • Establish and maintain engineering standards aligned with UL, NEC, NFPA, ANSI, and IEEE codes
  • Collaborate with manufacturing, testing, and product support teams to support project execution
  • Support new product development initiatives and emerging technologies
  • Partner with leadership to plan engineering capacity and prioritize projects


Qualifications

  • Bachelor’s degree in Electrical Engineering or related field
  • 5+ years of experience in switchgear or switchboard design
  • 2+ years of leadership or supervisory experience
  • Strong knowledge of electrical distribution systems and switchgear components
  • Understanding of industry standards including UL, NEC, NFPA, ANSI, and IEEE
  • Ability to lead engineering teams and manage multiple priorities
Not Specified
Nuclear Engineer
Salary not disclosed
Palmetto, Florida 1 week ago

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Electrical Estimator
🏢 SNI Companies
Salary not disclosed
Palmetto, FL 1 week ago

Quotations Specialist - Palmetto, FL

A growing electrical manufacturing division is seeking a Quotations Specialist to support the preparation of accurate and competitive estimates for custom switchgear and electrical distribution equipment projects. This role works closely with engineering, production, and sales teams to develop proposals, analyze costs, and support bid strategy.

This is an excellent opportunity for someone with experience in electrical estimating, switchgear manufacturing, or technical quotations who enjoys working in a collaborative, fast-paced environment.


Benefits & Perks

  • Comprehensive benefits package including medical, dental, and vision coverage
  • Paid time off and company holidays
  • On-site fitness center / gym available to employees
  • Company cafeteria with chefs providing fresh meals
  • Frequent employee appreciation events and meals
  • Opportunity to take prepared meals home for your family
  • On-site massage and wellness areas
  • Employee recognition programs including Employee of the Month perks
  • Collaborative culture focused on innovation, teamwork, and growth


Key Responsibilities

  • Review blueprints, specifications, and bid documents to prepare time, material, and labor estimates
  • Develop competitive quotations and proposals for switchgear and electrical equipment projects
  • Collaborate with engineering and production teams to ensure designs align with manufacturing capabilities
  • Issue RFQs to vendors and suppliers, evaluate pricing, and recommend cost-effective alternatives
  • Partner with sales teams to support bid strategy and clarify customer requirements
  • Identify value engineering opportunities to improve cost efficiency while maintaining quality
  • Maintain cost databases, supplier pricing, and bid documentation
  • Track open quotes and assist with transition from awarded project to production


Qualifications

  • Bachelor’s degree preferred in engineering, construction, business, or related field OR relevant experience in electrical estimating, quotations, or project coordination
  • 2+ years of experience in electrical distribution, switchgear, or manufacturing environment preferred
  • Ability to read and interpret technical drawings, specifications, and bid packages
  • Strong analytical, math, and organizational skills
  • Proficiency in Microsoft Office; ERP/MRP or estimating software experience is a plus
  • Strong communication skills with the ability to work with sales teams, suppliers, and customers
Not Specified
Project Engineer
Salary not disclosed
Palmetto, Florida 1 week ago

Job Description:

Production and Process Technologies is seeking a Project Engineer who is eager to

learn and grow within a project-focused engineering environment. This role

offers hands-on experience across planning, coordination, and technical work, with

room to grow into eventually managing projects independently, leading teams,

and taking ownership of exciting initiatives.

Location:

• Palmetto, FL.

Job Type:

• Full Time

Job Duties:

• Assist project management with day-to-day planning, coordination, scheduling, and administrative support.

• Monitor project progress and ensure timely completion of tasks.

• Prepare, maintain, and organize project documentation, equipment lists, P&IDs, and AutoCAD drawings.

• Support procurement activities, including obtaining quotes, creating purchase orders, ordering materials, and tracking deliveries.

• Maintain internal tracking of materials, costs, and project budgets.

• Coordinate with field crews to ensure materials, tools, and information are available on site.

• Respond to technical and project-related questions from field teams and internal stakeholders.

• Participate in internal and client meetings, providing follow-up, documentation, and coordination support.

• Support permit preparation, site walks, and verification of project conditions.

• Assist with project startup, flushing, testing, and commissioning activities.

• Prepare and maintain SPAs and other required project documentation.

• Support job quoting, estimating, and project closeout activities.• Follow up with internal teams, vendors, and subcontractors to maintain schedules and project timelines.

Education and Experience:

• 4 year engineering degree preferred.

• Minimum 3-5 years experience in the industry.

• Prior exposure to mechanical, industrial, or construction-related environments preferred.

Required Skills:

• Mechanical aptitude with basic understanding of mechanical or process systems.

• Technical problem-solving skills and attention to detail.

• Strong work ethic and willingness to learn and grow in a hands-on engineering environment.

• Reliable, punctual, and able to manage time effectively.

• Ability to take initiative, work independently, and learn through experience.

• Comfortable working in both office and field environments.

• Strong interpersonal, verbal and written communication skills.

• Demonstrate and uphold PPT Florida's core values, including respect, communication, integrity, and accountability.

Physical Requirements and Work Environment:

• Office environment with roughly 50% travel to construction sites or field locations, primarily in Florida.

• May require lifting and carrying items up to 25 pounds.

• Must be able to wear appropriate PPE when visiting job sites.

• Dynamic project-driven environment – While primarily standard business hours, the position may occasionally require extended hours, evenings, or weekend availability to support project needs, site activities, or time-sensitive issues. Flexibility and responsiveness are key to success in this role.

Compensation and Benefits:

• Competitive salary with excellent work/life balance

• Generous vacation policy

• Annual performance-based bonuses

• Paid time off

• Health, dental, vision, life, and disability insurance• Safety equipment provided

• 401k with company match

• Company cell phone

• Company credit card for all job/travel related expenses

• ESOP owned company - employees accrue ownership shares of the company

beginning after one year of service

• Bonus opportunities

Production and Process Technologies (PPT Florida) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Not Specified
Manufacturing Engineer
Salary not disclosed
Sarasota, FL 1 week ago

5+ years of experience within a manufacturing environment.

Proficient in SolidWorks, using it for 3D modeling, assemblies, and detailed manufacturing drawings

Knowledge of Lean Manufacturing principles, including 5S and Kaizen, to drive continuous improvement.

ERP/MRP system experience to support production planning and material flow

B.S. in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a similar discipline



A client of insight global is seeking a Manufacturing Engineer for a client in Sarasota, FL. The Manufacturing Engineer responsible for supporting day‑to‑day production operations by developing, implementing, and optimizing manufacturing processes to improve efficiency, quality, and throughput. This role involves using SolidWorks to create and maintain 3D models, assemblies, detailed drawings, and GD&T, as well as designing jigs, fixtures, and tooling to support machining and assembly operations. The engineer partners closely with design and quality teams to ensure DFM/DFA during new product introductions, leads Lean Manufacturing initiatives such as 5S and Kaizen events, and drives continuous improvement through time studies, capacity analysis, and value stream mapping. They troubleshoot production issues using structured root cause analysis methods, maintain process documentation including SOPs, PFMEAs, and control plans, train operators on new processes and equipment, and ensure compliance with safety, quality, and ISO standards while working within ERP/MRP systems.


Compensation:


$70,000 to $80,000.


Exact compensation may vary based on several factors, including skills, experience, and education.



Benefit packages for this role will start on the 1st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

Not Specified
Director of Surgical Service Full-Time Days Manatee Memorial Hospital
Salary not disclosed
BRADENTON, FL 1 week ago
Responsibilities

About Manatee Memorial Hospital (MMH):

Manatee Memorial Hospital in Bradenton, Florida, has served the citizens of Manatee, Sarasota and surrounding counties for over 70 years. Part of the Manatee Healthcare System, the hospital has earned The Joint Commission’s Gold Seal of Approval. The 295-bed hospital with over 800 physicians, residents and allied health professionals, offers advanced healthcare services in a caring and compassionate environment. Services include cardiac care and cardiovascular medicine, emergency care for all ages, surgery services — including robotic-assisted surgery with the da Vinci® Surgical System, a weight–loss program, orthopedic services, outpatient and inpatient radiology and rehabilitation, respiratory care, sleep, oncology, wound care and women’s and children’s services. Manatee Memorial Hospital also offers a Level II Neonatal Intensive Care Unit for babies with special needs.

 

Position Summary:

The Nurse Director assumes 24 hours responsibility in directing and coordinating the clinical activities and operations of a nursing department(s). The Nurse Director supervises, evaluates, and holds accountable the ongoing performance of the nursing staff based on the facility’s operational pillars.  Maintains structures and processes that ensure patient centered care and supports the development of staff through mentoring and stewardship. He/she supports work redesign and quality improvement using evidenced base practice to achieve clinical excellence. The Nurse Director is held fiscally responsible for the departments operating budgets and administrative functions.

Demonstrates Service Excellence at all times. Other duties as assigned.

 

Job Information:

  • This position is for a full-time position as Director of Surgical Services
  • At least 3 years of experience in area of practice
  • Previous management experience required

MMH offers comprehensive benefits such as:

  • Challenging and rewarding work environment
  • Competitive Compensation
  • Excellent Medical, Dental, Vision, and Prescription Drug Plan
  • Generous Paid Time Off
  • 401(K) with company match and discounted stock plan
  • Career development opportunities within UHS and its Subsidiaries

About Universal Health Services

One of the nation’s largest and most respected providers of hospital and healthcare services, Universal Health Services, Inc. (UHS) has built an impressive record of achievement and performance. Growing steadily since its inception into an esteemed Fortune 500 corporation, annual revenues were $15.8 billion in 2024. UHS was again recognized as one of the World’s Most Admired Companies by Fortune; listed in Forbes ranking of America’s Largest Public Companies. Headquartered in King of Prussia, PA, UHS has approximately 99,000 employees and continues to grow through its subsidiaries. Operating acute care hospitals, behavioral health facilities, outpatient facilities and ambulatory care access points, an insurance offering, a physician network and various related services located all over the U.S. States, Washington, D.C., Puerto Rico and the United Kingdom.
Qualifications

  • Graduation from Accredited School of Nursing
  • Current RN licensure in Florida
  • BSN, required
  • MSN required or matriculation to be completed within 3 years of hire
  • Current BLS Certification through American Heart Association
  • Current ACLS Certification through American Heart Association

EEO Statement

All UHS subsidiaries are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. UHS subsidiaries are equal opportunity employers and as such, openly support and fully commit to recruitment, selection, placement, promotion and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state or local laws.

 

Avoid and Report Recruitment Scams

We are aware of a scam whereby imposters are posing as Recruiters from UHS, and our subsidiary hospitals and facilities. Beware of anyone requesting financial or personal information.

At UHS and all our subsidiaries, our Human Resources departments and recruiters are here to help prospective candidates by matching skill set and experience with the best possible career path at UHS and our subsidiaries. During the recruitment process, no recruiter or employee will request financial or personal information (e.g., Social Security Number, credit card or bank information, etc.) from you via email. Our recruiters will not email you from a public webmail client like Hotmail, Gmail, Yahoo Mail, etc.If you suspect a fraudulent job posting or job-related email mentioning UHS or its subsidiaries, we encourage you to report such concerns to appropriate law enforcement. We encourage you to refer to legitimate UHS and UHS subsidiary career websites to verify job opportunities and not rely on unsolicited calls from recruiters.

permanent
Aviation Electronics, Electrical & Computer Systems Technician
🏢 U.S. Navy
Salary not disclosed

Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.

Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.

Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.

What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.

Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.

Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.

Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Aviation Electrician's Mate
🏢 U.S. Navy
Salary not disclosed
Longboat Key, Florida 1 week ago

Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.

Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.

Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.

What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.

Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.

Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.

Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Telecom & Contact Center Engineering Sr. Analyst (Hybrid)
Salary not disclosed

*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*

Position Summary:

Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.

As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.

You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.

Responsibilities include but not limited to:

  • Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms

  • Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions

Qualifications:

  • Hands-on experience engineering and supporting cloud-based telephony or contact center platforms

  • Strong understanding of VoIP technologies, SIP, and call routing concepts

  • RingCentral and RingCentral Contact Center engineering

  • NiCE inContact / CXone administration and development

  • Cyara or similar modern telephony orchestration platforms

  • Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments

  • Solid knowledge of networking concepts related to real-time communications

Preferred Qualifications:

  • Supporting remote contact center agents

  • REST API integrations and automation

  • Scripting using PowerShell or Python

  • Workforce management, call recording, or speech technologies

  • PSTN carrier and phone number lifecycle management

This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.

#LI-Hybrid**This position willhave a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$72,000.00 - $134,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Test Engineering Tech II - 401 Shift Days - Flexible Shift Options for Work-Life Balance (FLORENCE)
Salary not disclosed
JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Work from anywhere with rare travel demands (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer – Infrastructure Design (Remote) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 1 day ago
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Principal Mechanical Integration Engineer
Mechanical Design Engineering 
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
permanent
SAP Engineer - Licensing and Compensation (Hybrid)
🏢 Securian
Salary not disclosed
Saint Paul, MN, Hybrid 3 days ago

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

  • Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

  • Perform analysis, design, development, and integration on medium to high level complexity assignments.

  • Develop and support automation capabilities through webservices and APIs.

  • Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

  • Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

  • Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

  • Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

  • Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

  • Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

  • 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

  • Familiarity with SAP ICM/APM and ALM modules.

  • Strong problem-solving skills and ability to manage multiple priorities.

  • Excellent communication skills and ability to work cross-functionally.

  • Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

  • SAP Certification in relevant Modules

  • Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

  • Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

  • Ability to work independently and as part of a collaborative team.

  • Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$72,000.00 - $134,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Principal Thermal Rack Engineer (Rack Integration Solutions) - Hybrid Work Flexibility (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
temporary
Senior Engineer, Global Services - Hybrid
Salary not disclosed
Medina, Hybrid 6 days ago
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.

Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.

Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.

Visit us at to learn more and view our open positions.

Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.

must have the ability to travel Only W2 candidates are eligible for this position.

Third-party or C2C candidates will not be considered.

Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.

Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.

Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.

Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.

The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.

Need not have any tools/ software experience, CAD would be a plus.

Medical background will be a plus any regulatory background will be good.

Someone who was worked with Engineers, multitasking will be a great fit.

Ambiguity, adapt, multi-task and works with lead engineer in projects.

Support the team of Product core and represent service operations and supply chain.

Will be in charge of Service change implementation.

Focuses on design changes, process changes.

Collaborates with Service Process, Engineers, Technicians, impact of changes.

Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.

Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.

2.

Supports new product platform releases.

Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.

3.

Evaluates / makes recommendations on product releases related to design for serviceability.

Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.

4.

Works closely with design team to select, develop, and implement technologies across all medical device development programs.

5.

Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.

6.

Coordinates information flow between corporate and local/regional teams.

7.

Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.

8.

May represent Technical Services on new product development and/or lifecycle management core teams.

9.

May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.

10.

May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.

Must be well versed in core engineering disciplines (e.g.

mechanical, electrical, software, systems engineering).

2.

Highly motivated self-starter who is able to work with minimal supervision.

3.

Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.

4.

Experience with change control methodologies and configuration management principles is a plus.

5.

Experience with test engineering and/or reliability engineering principles is a plus.

6.

Ability to exercise independent judgment and draw conclusions based on available information.

7.

Good understanding of GMP and quality system requirements.

Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.

Medical device experience or other regulated industry experience preferred.

Experience in the use of Lean Six Sigma tools highly desirable.

About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.

The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.

DivIHN is an equal opportunity employer.

DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.

GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Not Specified
jobs by JobLookup