Engineering Structures Jobs in Cudahy Wi Remote
507 positions found — Page 3
M
Senior Electrical Design Engineer
Salary not disclosed
We are seeking someone with strong design experience, specifically with proven capability in managing end‑to‑end design change projects from a technical standpoint—not just handling the QMS aspects
Job Description:
"• Develop qualification plans for supplier transfer projects and complete associated verification testing.
• Manage and execute Engineering Change Requests (ECRs) and Engineering Change Orders (ECOs)..
Not Specified
I
Electrical Installer
Salary not disclosed
Must haves:
- Electrical apprenticeship or formal training in electrical installation techniques.
- Demonstrated ability to read and interpret drawings.
- Possesses working knowledge of local codes as it applies to controls.
- Experienced in scope determination of installation materials. Able to work independently.
- Four years’ experience directly with controls installations.
Day to day:
Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.
- Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.
- Mounts and terminates controls equipment as needed.
- May assist sales with electrical estimates, including walking retrofit projects.
- Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).
- Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).
- Keeps management informed of job needs, progress and issues.
- Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to Engineering on changes and keeps as-built drawings current.
- Resolve job site conflicts regarding installation issues or escalates concerns to management as required.
- Communicates with the customer as necessary upon arrival and before leaving the work site.
- Adheres to safety programs and policies.
- Performs other related duties as assigned.
Not Specified
A
Advanced Cardiac Imaging up to $591K Work w/cardiology fellows - Milwaukee, WI
✦ New
Salary not disclosed
Join Aurora Health Care as a multi-modality advanced imaging cardiologist in Milwaukee, Wisconsin—part of Advocate Health, one of the largest nonprofit integrated health systems in the country.
At Advocate Health, we’re committed to being a Best Place to Care—where physicians are empowered, heard, and equipped to do their best work. You’ll be part of a leading integrated system with a shared commitment to innovation, well-being, and the communities we serve. Whether you're seeking professional growth, meaningful impact, or a team that lifts you up—this is where it starts.
Aurora St. Luke’s Medical Center is the largest hospital in Wisconsin and the heart of our cardiovascular program. This flagship hospital is home to our cardiac specialty centers, the largest heart transplant/VAD program in the state, and the largest Structural Valve Program in Wisconsin. Aurora St. Luke’s is also the at the core of our academic pursuits and groundbreaking trials in cardiovascular disease (including TAVR, TMVR, tricuspid, LAAO, stroke, pulmonary embolism, cardiogenic shock). With a robust fellowship program (>30 trainees in general cardiology, Advanced Imaging, Heart Failure, Interventional Cardiology, Electrophysiology, and Structural Heart Disease), we are committed to training the next generation of physicians.
Our Advanced Imaging Core Group provides coverage for echocardiography, interventional echocardiography, cardiac CT, SPECT/PET, and CMR in a well-established cardiovascular group (75 cardiologists system-wide, 25 at Aurora St. Luke’s campus) on the forefront of cardiology. The ideal candidate would have completed an advanced imaging fellowship and have interest in multi-modality imaging, structural heart disease procedures, clinical education and clinical research.
Highlights
- Provide physician coverage and interpretation of transthoracic and trans-esophageal echocardiograms
- Provide physician coverage and interpretation of cardiac CT
- Provide physician coverage and interpretation of cardiac MRI
- Provide physician supervision for stress laboratory, staffed with physician assistants for nuclear and echocardiographic stress tests
- Provide physician coverage and interpretation of nuclear cardiology scans (if desired)
- Participate in structural heart interventions in our well-established structural program (if desired)
- Supervise and teach general cardiology fellows, advanced imaging fellows, and cardiac sonography students, and other trainees
- Contribute to the academic pursuits of the Wisconsin Cardiovascular service line, including mentoring trainees to abstracts and publications
- Opportunity to be 100% imaging or include clinic and hospital service
- Weekend call rotation is 1:6 which includes full Saturday and Sundays of imaging
- No general cardiology call
- Primary location of work: Aurora St. Luke’s Medical Center
- EPIC EMR
- Be part of an integrated nationally recognized organization with physician-led medical group and embedded service line
- Leverage access to DAX Copilot, an AI-powered clinical documentation tool integrated with Epic, streamlining clinical workflows by generating draft patient notes for efficient review, editing, and signature
- Experience a diverse and inclusive environment ensuring safe and equitable care for all patients
- Annual base salary: $541,826- $541,826
- Up to $50K annual incentive bonus
- Sign-on bonus
Training and/or Experience Required
- Board certified / eligible in general cardiology
- Board certified / eligible in echocardiography/Level III in Echocardiography
- Board certified / eligible in cardiac CT/Level II or III in Cardiac CT
- Board certified / eligible in cardiac MRI /Level II or III in Cardiac CMR
- Board certified/eligible in nuclear cardiology/Level II or III in Nuclear Cardiology
- Ability to hold a Wisconsin Medical License
- Completion of advanced imaging fellowship (1-2 years)
Preferred Skills:
- Board certified / eligible in nuclear cardiology and cardiac CT
- Track record of clinical research in advanced imaging
Experience and interest in structural CT
Experience and interest in the education of cardiology fellows in cardiac imaging
Benefits
- Paid Time Off programs available for eligible positions
- Comprehensive health and welfare benefits, including medical, dental, vision, life, and disability coverage
- Retirement benefits, including 401(k) options with employer contributions and access to financial wellness resources
- Flexible spending accounts for eligible health care and dependent care expenses
- Family support benefits, which may include parental leave, adoption assistance, and surrogacy support
- Educational assistance and professional development programs
- Paid medical liability insurance
- Continuing Medical Education (CME) allowances
- Relocation assistance
About Milwaukee, Wisconsin
With a county-wide population of nearly a million, Milwaukee offers the best of everything you'd expect to find in a major city while retaining a hometown feel in its many neighborhoods. Culturally, Milwaukee has many options, ranging from performing arts centers, theaters and museums, including an internationally designed lakefront art museum and home to one of the nation's top 10 zoos. Sophisticated, scenic, affordable and event-filled, Milwaukee has an impressive array of public and private schools, including UW-Milwaukee and Marquette University, award-winning restaurants, world-class shopping, and one of the most convenient and "user-friendly" international airports in the world.
Not Specified
DI Claims Specialist
Salary not disclosed
Primary Duties & Responsibilities• Determine applicability of benefits claimed by interpreting contract provisions and maintaining consistency with our DisabilityBenefits claim philosophy.• Order and review appropriate medical, financial, investigative, and other information needed to determine the eligibility ofclaims.• Actively manage a caseload of pending and active claim files by evaluating claim information and making decisions regardingapproval, denial, continuing payments, and terminations on a regular, ongoing basis.• Communicate both verbally and in writing with insureds, field representatives, medical practitioners and related facilities,attorneys, other insurance companies, appointed financial advisors, employers, governmental agencies and divisionalresources which involves negotiation and conflict resolution.• Preserve Northwestern Mutual's image and reputation in making benefit decisions despite difficult and delicatecircumstances.• As part of the claim handling process, may be called upon to represent the Company in legal matters through preparation forand participation in depositions and trials.• Approval limits: $0-$6,000 contestable and non-contestable claims.Qualifications• Bachelor's degree, experience in administering disability claims, or equivalent work experience.• 1-3 years of responsible and relevant work experience demonstrating analytical ability, independent decision-making andsound judgment in the application of guidelines.• Ability to collaborate within and across teams to obtain the best possible results.• Excellent organization and communication skills with emphasis on written communication Compensation Range: Pay Range
- Start: $53,270.00 Pay Range
- End: $98,930.00 Geographic Specific Pay Structure: Structure 110: $58,590.00 USD
- $108,810.00 USD Structure 115: $61,250.00 USD
- $113,750.00 USD We believe in fairness and transparency.
It’s why we share the salary range for most of our roles.
However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process.
The standard pay structure is listed but if you’re living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more.
Grow your career with a best-in-class company that puts our clients' interests at the center of all we do.
Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce.
We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives.
Skills Problem Management (NM)
- Intermediate, Prioritization (NM)
- Intermediate, Empathetic Communication (NM)
- Intermediate, Insurance Acumen (NM)
- Beginner, Customer Centricity (NM)
- Intermediate, Analytical Thinking (NM)
- Intermediate, Learning Agility (NM)
- Intermediate (Inactive), Insurance Contract Management (NM)
- Beginner, Adaptive Communication (NM)
- Intermediate, Information Gathering (NM)
- Beginner, Decision Making (NM)
- Intermediate, Attention to Detail (NM)
- Intermediate, Claims Acumen (NM)
- Intermediate, Change Adaptability (NM)
- Intermediate, Data Application (NM)
- Beginner FIND YOUR FUTURE We’re excited about the potential people bring to Northwestern Mutual.
You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging.
Flexible work schedulesConcierge serviceComprehensive benefitsEmployee resource groupsPandoLogic.
Keywords: Insurance Examiner, Location: Franklin, WI
- 53132
- Start: $53,270.00 Pay Range
- End: $98,930.00 Geographic Specific Pay Structure: Structure 110: $58,590.00 USD
- $108,810.00 USD Structure 115: $61,250.00 USD
- $113,750.00 USD We believe in fairness and transparency.
It’s why we share the salary range for most of our roles.
However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process.
The standard pay structure is listed but if you’re living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more.
Grow your career with a best-in-class company that puts our clients' interests at the center of all we do.
Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce.
We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives.
Skills Problem Management (NM)
- Intermediate, Prioritization (NM)
- Intermediate, Empathetic Communication (NM)
- Intermediate, Insurance Acumen (NM)
- Beginner, Customer Centricity (NM)
- Intermediate, Analytical Thinking (NM)
- Intermediate, Learning Agility (NM)
- Intermediate (Inactive), Insurance Contract Management (NM)
- Beginner, Adaptive Communication (NM)
- Intermediate, Information Gathering (NM)
- Beginner, Decision Making (NM)
- Intermediate, Attention to Detail (NM)
- Intermediate, Claims Acumen (NM)
- Intermediate, Change Adaptability (NM)
- Intermediate, Data Application (NM)
- Beginner FIND YOUR FUTURE We’re excited about the potential people bring to Northwestern Mutual.
You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging.
Flexible work schedulesConcierge serviceComprehensive benefitsEmployee resource groupsPandoLogic.
Keywords: Insurance Examiner, Location: Franklin, WI
- 53132
permanent
DI Initial Claims Analyst
🏢 Northwestern Mutual
Salary not disclosed
Summary
Manages a caseload of Initial Claims for Disability Income and Waiver of Premium claims with guidance from mentor and team leader, to educate callers on contractual claims guidelines, evaluate and analyze outstanding requirements and gather information, identify issues, and research solutions and communicate in a timely, professional and confident manner. Resolve non-complex issues without escalation, identify the need for special handling and communicate with the client or Financial Representative to obtain missing information and expedite request for disability benefits. Work directly with customers to create a positive customer experience when answering questions via direct calls or ones received in a call center environment, with the knowledge to analyze problems and handle the research necessary to resolve basic questions from policy owners and Financial Representative.
Primary Duties and Responsibilities
Claim Management/Analysis and customer service
- Initial Claim Analysis by administering a caseload of new preliminary claims in preparation for assignment to claims analysts or termination of the preliminary claim based on guidelines
- As part of the claim handling process, may be called upon to represent the Company in legal matters through preparation for and participation in depositions and trials.
- Handles claim files actively by evaluating claim information and making decisions regarding initial claim handling.
- Delivers a personalized and remarkable experience for our clients by having a solid understanding of basic contract knowledge and answering their questions, providing servicing options and helping them with their products or services in a call center environment.
- Resolves inquiries and transactions from Financial Reps and clients on basic level calls and transactions and is working towards proficient in complex work.
- Takes ownerships of calls and anticipates future issues to avoid repeat calls and unnecessary call transfers.
- While working closely with team lead or mentor, is coached to de-escalate client experience situations effectively while guiding clients through complex and unique inquiries.
- Serves as a trusted advocate for our Financial Representatives and partners with them to meet the needs of our clients.
- Embraces new technology and serves as an advocate for website and self-service capabilities by educating clients and field. Understands risks and impacts that the transaction has on the client or policy.
- Drives change and embraces continuous improvement by creating processes and provisions to accommodate change.
- Handles phone, transactional and claim responsibilities while adhering to strict confidentiality and privacy standards.
- Adept at shifting work priorities to meet the needs of the business and customer demand.
- Appropriately documents claim with telephone conversations, file memos and referrals.
- Prepares written communication with the help of pattern letters.
Compensation Range:
Pay Range - Start:
$18.74Pay Range - End:
$28.10Geographic Specific Pay Structure:
Structure 110:
Structure 115:
We believe in fairness and transparency. It’s why we share the salary range for most of our roles. However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process. The standard pay structure is listed but if you’re living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more.
Grow your career with a best-in-class company that puts our clients' interests at the center of all we do. Get started now!
Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce. We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives.
FIND YOUR FUTUREWe’re excited about the potential people bring to Northwestern Mutual. You can grow your career here while enjoying first-class perks, benefits, and our commitment to a culture of belonging.
- Flexible work schedules
- Concierge service
- Comprehensive benefits
- Employee resource groups
permanent
L
Livestream Sales Representative
✦ New
Salary not disclosed
About Us
KNET Group is the largest sneaker resale company in the world, helping sellers scale across multiple marketplaces through proprietary cross-listing technology and integrated fulfillment services. We power high-volume resale businesses by handling the operational complexity behind pricing, listings, logistics, and marketplace execution.
Powered by KNET, Fly Kicks is the leading sneaker shop on TikTok, where customers discover and purchase sneakers through interactive videos and livestream shopping experiences.
Role Mission
The TikTok Shop Live Host leads the on-camera experience for Fly Kicks live shopping sessions.
This role exists to create and engaging, high-energy environment where viewers can confidently discover, learn about, and purchase sneakers in real time.
Hosts guide the audience through products, answer questions, provide clarity, and maintain strong interaction through the live session.
The Host owns energy, clarity, and credibility during live sessions.
This is a performance-driven individual contributor role within a structured live operations system.
Key ResponsibilitiesHost Live Shopping Sessions
- Host scheduled TikTok Shop live sessions and guide viewers through the live shopping experience
- Present products clearly and confidently, explaining key details such as fit, sizing guidance, style context, and product highlights
- Help viewers feel confident purchasing by clearly answering questions and explaining products in real time
- Maintain strong, consistent energy and presence throughout the live session
- Continuously engage with live chat, responding to viewer questions and creating an interactive environment
- Follow structured live selling flows while remaining natural, conversational, and adaptable
- Represent the Fly Kicks brand with professionalism, confidence, and trust
Hosts are responsible for creating a live experience that feels clear, engaging, and trustworthy for viewers.
What the Host Focuses On
To allow hosts to fully focus on audience engagement and on-camera performance, the following responsibilities are managed by the Live Operations team:
- Product selection or pricing decisions
- Backend stream controls (pinning products, launching discounts, giveaways)
- Technical production or equipment setup
- Inventory verification or operational troubleshooting
- Marketing, traffic generation, or promotional strategy
Hosts work alongside Live Operators, who manage the technical and operational execution behind the scenes during live sessions.
Working Model
- Part-time role (2–5 live sessions per week)
- Approximately 3.5 hours per session
- Evening and weekend availability
- Hosts will work alongside Live Operators who manage backend execution
- Sessions take place on-site in our studio environment
What a Typical Session Looks Like
- Arrive at the studio and align with the Live Operator on the session plan
- Review the products scheduled for the live
- Start the livestream and welcome viewers into the session
- Present products explaining fit, style, and key details
- Engage with live chat continuously, answering questions and interacting with viewers
- Introduce flash sales or promotions when triggered by the Live Operator
- Maintain strong energy and pacing throughout the session
- Wrap up the live session and brief review how the session went with the team
Live sessions are fast-paced and highly interactive. Strong hosts stay engaged, communicative, and energetic throughout the entire session.
Required Strengths
- Strong on-camera presence and comfort speaking for extended periods
- Comfort interacting with large audiences in real time
- High-energy, expressive communication style
- Clear and structured verbal explanation skills
- Ability to think and respond quickly in live, unpredictable environments
- Strong real-time listening and audience engagement ability
- Coachable and responsive to feedback
- Comfortable improvising when needed
- Reliable attendance and punctuality
- Professional, camera-ready presentation
Nice to Have
- Sales, retail, or customer-facing experience
- Experience speaking or presenting in front of groups
- Interest in sneakers, fashion, or streetwear culture
- Experience hosting, streaming, or engaging with online audiences
- Background in performance, theater, teaching, or public speaking
- Participation in clubs, sports teams, or student organizations where communication or leadership was involved
Performance Expectations
High-performing Hosts demonstrate:
- Clear, confident product explanations
- Consistent energy and pacing
- Strong viewer trust and engagement
- Natural, conversational chat interaction
- Noticeable improvement live-to-live
- Strong collaboration with Operators and Live Lead
Compensation & Progression
Live Hosts are compensated through a combination of hourly pay and commission earned from live sales.
Once certified to host live sessions independently, Hosts earn:
- Base hourly pay for each live session
- Commission on sales generated during live streams
- Increased earning potential as performance improves
Top-performing Hosts have the opportunity to increase their earnings through higher hourly/commission tiers and placement in higher-traffic live sessions.
Because live commerce rewards strong communication and audience engagement, hosts who consistently perform well can significantly increase their earning potential over time.
Training & Certification
Before hosting sessions independently, all new hires complete a paid training and certification phase where they learn the Fly Kicks live selling system, product presentation standards, and live flow structure.
Training ensures every host is prepared to represent the Fly Kicks brand confidently before running live sessions.
Advancement and certification are based on performance, reliability, and readiness to host live sessions independently.
Not Specified
L
Livestream Sales Representative (Backend Operator)
✦ New
Salary not disclosed
About Us
KNET Group is the largest sneaker resale company in the world, helping sellers scale across multiple marketplaces through proprietary cross-listing technology and integrated fulfillment services. We power high-volume resale businesses by handling the operational complexity behind pricing, listings, logistics, and marketplace execution.
Powered by KNET, Fly Kicks is the leading sneaker shop on TikTok, where customers discover and purchase sneakers through interactive videos and livestream shopping experiences.
Role Mission
The TikTok Shop Live Operator manages the behind-the-scenes execution of Fly Kicks live shopping sessions.
Operators ensure each livestream runs smoothly, energetically, and without technical or pacing breakdowns by controlling the live mechanics and operational flow.
While the host focuses on communicating with viewers and presenting products on camera, the operator manages the live system — including product pins, flash sales, giveaways, chat moderation, and session pacing.
Operators are responsible for maintaining the structure, momentum, and technical reliability of every live session.
This is a high-accountability individual contributor role within a structured live operations system.
Key Responsibilities
Manage Live Execution
- Launch and manage TikTok Shop livestreams on schedule
- Pin and rotate products accurately throughout the session
- Trigger flash sales, discounts, and giveaways at appropriate moments
- Monitor live engagement signals and product performance
- Moderate chat and surface important viewer interactions
- Manage transitions between products and segments
- Troubleshoot technical issues calmly and quickly
- Maintain pacing, structure, and momentum throughout the session
Prepare the Live Environment
- Prepare and organize the studio environment before each session
- Stage featured products and verify inventory availability
- Test lighting, cameras, audio, and music levels
- Ensure TikTok Shop backend readiness (product pins, discounts, giveaways)
- Align with the host on the session plan before going live
Post-Live Review
- Properly close and shut down livestream systems
- Reset staging areas and equipment
- Review key performance metrics from the live session
- Document operational issues and improvement opportunities
- Share insights with the Live Lead to improve future sessions
What the Operator Focuses On
To allow hosts to fully focus on audience engagement and on-camera performance, the following responsibilities are managed by the Live Operations team:
- Product selection or pricing decisions
- Backend stream controls (pinning products, launching discounts, giveaways)
- Technical production or equipment setup
- Inventory verification or operational troubleshooting
- Marketing, traffic generation, or promotional strategy
Hosts work alongside Live Operators, who manage the technical and operational execution behind the scenes during live sessions.
Working Model
- Part-time role (2–5 live sessions per week)
- Approximately 5 hours per session
- Evening and weekend availability
- Operators support multiple hosts across different live sessions
- Sessions take place on-site in our studio environment
What a Typical Session Looks Like
- Arrive at the studio and prepare the live environment
- Stage products and confirm backend readiness
- Align with the host on the session plan
- Start the livestream and manage backend execution
- Pin products and trigger flash sales throughout the session
- Monitor chat, engagement, and product performance
- Manage transitions between products and segments
- Troubleshoot any technical issues that arise
- End the live session and reset the environment
- Review the session and document improvement opportunities
Required Strengths
- Strong focus and attention to detail during fast-paced environments
- Ability to manage multiple inputs simultaneously (chat, host cues, backend tools)
- Comfortable making quick decisions under pressure
- Clear real-time communication with hosts and team members
- Strong organizational and problem-solving skills
- Ability to maintain energy and focus during multi-hour live sessions
- Coachable and responsive to feedback
- Reliable attendance and punctuality
- Professional and composed in live environments
Nice to Have
- Experience with livestream platforms or live production environments
- Familiarity with TikTok Shop or e-commerce platforms
- Experience in fast-pace, attention to detail environments
- Interest in sneakers, fashion, or live commerce
- Experience working in collaborative team environments
- Participation in clubs, sports teams, or student organizations where communication or leadership was involved
Performance Expectations
High-performing Operators demonstrate:
- Clean, accurate live execution
- Strong pacing and transition management
- Quick response to technical or operational issues
- Clear communication with hosts during live sessions
- Consistent improvement session-to-session
- Strong collaboration with Hosts and the Live Lead
Compensation & Progression
Operators are compensated through a combination of hourly pay and commission earned from live sales.
Once certified to operate live sessions independently, operators earn:
- Base hourly pay for each live session
- Commission participation on sales generated during supported live streams
- Increased earning potential as experience and performance improve
Top-performing operators have the opportunity to increase their earnings through higher hourly and commission tiers as they progress.
Training & Certification
Before operating live sessions independently, all new hires complete a paid training and certification phase where they learn the Fly Kicks live operations system, backend tools, and live flow structure.
Training ensures every operator understands the live execution system and is fully prepared to manage livestream mechanics before supporting live sessions independently.
- Advancement and certification are based on performance, reliability, and readiness to operate live sessions confidently.
Not Specified
N
National Account Executive
✦ New
Salary not disclosed
Job Title: National Account Executive (VIP Sports Hospitality)
Entry Level Position
Location: Milwaukee, WI (In Office – Phone-Based Sales Role)
Compensation: Base Salary + Uncapped Commission + Performance Bonuses
About the Role
President’s Club Sports curates high-impact business environments through access to the world’s most prestigious sporting events including The Masters and the Super Bowl. We design bespoke, white-glove hospitality experiences that empower executives and high-net-worth individuals to strengthen relationships, close transformative deals, and reward key stakeholders.
This National Account Executive role is a phone-based, full-cycle sales position responsible for driving enterprise-level revenue nationwide.
- Initiate and lead high-level outbound phone conversations with C-suite executives and senior decision-makers, positioning President’s Club Sports as a strategic partner rather than a transactional vendor.
- Own the complete sales lifecycle, from cold outreach and executive discovery to proposal presentation, negotiation, and closing six to seven figure hospitality investments.
- Build credibility and trust through phone-based, email, and LinkedIn communication, demonstrating executive presence, polish, and consultative expertise in every interaction.
- Translate luxury sports hospitality into measurable business outcomes, aligning event access with revenue growth, client retention, and strategic relationship-building objectives.
Key Responsibilities
- Execute disciplined, high-volume outbound call strategies designed to penetrate enterprise-level organizations and secure meetings with senior leadership.
- Conduct in-depth discovery calls to uncover corporate priorities, budget alignment, decision-making structures, and timeline considerations.
- Develop customized hospitality solutions that align premium event access with a client’s sales strategy, partnership development, or executive engagement initiatives.
- Confidently present pricing, articulate value, handle objections, and close high-ticket agreements in a competitive marketplace.
- Manage and grow a national book of business by nurturing long-term executive relationships that generate renewals, referrals, and expanded annual commitments.
- Maintain consistent pipeline activity, ensuring accurate forecasting, disciplined follow-up cadence, and strategic territory planning.
- Document all prospect and client engagement within Salesforce, providing leadership with real-time revenue visibility and performance analytics.
Ideal Candidate Profile
- Demonstrates exceptional phone presence, vocal confidence, and the ability to command attention and credibility with senior executives.
- Possesses a strong desire to closing high-ticket B2B deals, ideally within enterprise sales, financial services, luxury markets, or other consultative industries.
- Thrives in a performance-driven environment that requires resilience, consistent outbound activity, and the discipline to manage sales cycles.
- Thinks strategically about business impact, positioning premium hospitality experiences as ROI-generating investments rather than discretionary expenses.
- Crafts articulate, persuasive written communication that reinforces executive conversations and reflects luxury brand standards.
- Exhibits high emotional intelligence, strong listening skills, and the ability to adapt messaging to diverse industries and leadership styles.
- Embraces coaching, accountability, and professional development with the ambition to grow into senior national account or leadership roles.
The Perks
- Uncapped Commission Structure – Direct correlation between performance and earnings, offering significant upside for top producers.
- Performance Bonuses – Additional financial incentives tied to revenue milestones, account growth, and strategic contribution.
- Event Access Opportunities – Potential to attend and host clients at premier sporting events, deepening relationships through shared experiences.
- Clear Career Advancement Path – Defined trajectory into senior national accounts, leadership positions, or strategic sales management.
- Professional, High-Performance Culture – Structured in-office environment in Milwaukee focused on discipline, accountability, and elite sales execution.
Benefits
- 401(k) with company matching
- Comprehensive health insurance coverage
- Dental and vision insurance
- Paid time off
Not Specified
C
Senior Investment Sales Analyst
Salary not disclosed
Job Title: Senior Investment Sales Analyst
Location: Milwaukee
Team: Investment Sales/Capital Markets
Reports To: Director of Transaction Management; works closely with the Transaction Coordinator and Senior Producers
Date: 2/5/2026
About the Company
Cushman & Wakefield | Boerke is a leading commercial real estate brokerage firm deeply rooted in Wisconsin. Since 1921, we have been providing commercial real estate users, owners, and developers with strategic solutions for their business and operational space needs. Our alliance with Cushman & Wakefield allows us to serve the local business community and commercial real estate market by offering national and global reach.
Job Summary
The Senior Investment Sales Analyst plays a critical role supporting Boerke’s Investment Sales Team through advanced financial analysis, property valuation, market research, and the production of institutional‑quality offering materials. This role is designed for an experienced analyst who can independently underwrite complex transactions, provide strategic pricing insight, and serve as a trusted analytical partner to senior producers.
Under the direction of the Director of Transaction Management, this position has meaningful responsibility across the full transaction lifecycle; from initial underwriting and valuation to marketing execution and closing support. This role offers deep exposure to investment sales, capital markets, and institutional clients in a fast‑paced, entrepreneurial environment.
Essential Job Duties and Responsibilities
Financial Analysis & Valuation
- Independently build, review, and refine detailed financial models, including pro formas, discounted cash flow analyses, IRR models, sensitivity analysis, rent-roll forecasting, and NOI projections.
- Lead underwriting efforts across major commercial real estate asset classes, with an emphasis on industrial, retail, multifamily, and office investments.
- Evaluate operating statements, lease abstracts, capital expenditure assumptions, debt structures, and market inputs to support pricing strategy and investment recommendations.
- Prepare and present Broker Opinions of Value (BOVs), pricing guidance, and valuation narratives for internal and client use.
- Help standardize, improve, and maintain underwriting and valuation templates used across the Investment Sales team, in coordination with the Transaction Coordinator and leadership.
Market Research & Data Management
- Conduct advanced market and asset-level research including leasing trends, comparable sales and rents, demographic data, supply/demand indicators, and cap-rate benchmarking.
- Maintain and enhance internal databases for sales comps, rent comps, active listings, and pipeline activity, partnering with the Transaction Coordinator to ensure data accuracy and consistency.
- Research property ownership details, parcel data, zoning information, and historical transaction records to support underwriting and marketing efforts.
- Track macroeconomic and capital markets trends relevant to institutional CRE and translate insights into actionable guidance for brokers and clients.
- Support maintenance of client and investor contact lists within CRM and shared databases to ensure accurate information for marketing and outreach.
Deal Execution & Transaction Support
- Assist in preparing high-quality offering memoranda, teasers, proposals, and pitch materials.
- Support due diligence by organizing data rooms, reviewing third-party reports, and managing document flow under the direction of the Transaction Coordinator and brokers.
- Support property tour coordination, analyze buyer feedback, and assist in preparing negotiation and decision-support materials.
- Assist in assembling closed deal files, including commission sheets and essential documentation, as requested.
- Help prepare activity reports, meeting agendas, and internal tracking sheets for the investment team.
Business Development
- Partner closely with brokers on pitch decks, client updates, competitor/market-share analysis, and custom client deliverables.
- Support new business proposals, RFP responses, and customized client deliverables.
- Assist with CRM pipeline management, mandate tracking, and relationship analytics.
- Support planning and execution of client events and investor outreach initiatives by preparing materials, lists, and follow‑up tracking in partnership with the Transaction Coordinator.
- Contribute to the creation and distribution of team newsletters and market updates by assisting in compiling recent transaction activity, submarket insights, and research findings.
Required Qualifications
- Bachelor’s degree in Finance, Real Estate, Economics, Accounting, or a related field.
- 3-6 years of experience in commercial real estate underwriting, investment sales, capital markets, investment banking, appraisal, private equity, or a related analytical role.
- Advanced proficiency in Excel, including complex financial modeling; strong working knowledge of Microsoft Word and PowerPoint with the ability to produce polished, client‑ready materials.
- Strong understanding of pro forma modeling, lease structures, commercial valuation methods, and core CRE fundamentals.
- Proven ability to independently manage multiple underwriting assignments and deadlines with a high level of accuracy and judgment.
- Excellent written and verbal communication skills, including the ability to simplify complex analyses.
- Comfortable operating in a dynamic, entrepreneurial environment.
Preferred Qualifications
- Prior experience at a CRE brokerage, private equity firm, lender, appraisal firm, REIT, or related capital markets environment.
- Demonstrated experience producing institutional-quality offering memoranda and BOVs.
- amiliarity with platforms such as CoStar, CREXI, RCA/MSCI, Reonomy, and CRM systems.
- ARGUS Enterprise experience strongly preferred.
- Knowledge of the Midwest commercial real estate markets and regional investor dynamics.
Compensation & Benefits
- Competitive salary, commensurate with experience
- Medical, dental, and vision insurance
- 401(k) with company match
- Paid time off and company holidays
- Performance-based bonus structure
- Professional development and industry education support
- Collaborative, entrepreneurial team environment
Not Specified
E
Assembler 3rd Shift
✦ New
Salary not disclosed
Eaton's ES AMER ESS division is currently seeking a Assembler 3rd Shift.
The hourly rate for this position is $22.50 per hour.
The hours for this shift are 10:30 pm - 6:30 am.
Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
What you'll do:
The Assembly position is responsible for performing a variety of diversified sub and light to heavy duty assembly operations on our switchgear product line. In this role, you will perform some complicated sub-assembly to final assembly operations, which contain a large number of parts and substantial fitting and aligning of components, utilizing bill of materials and prints as necessary - on a repetitive basis.
Key Processes Can Include:
Light, Medium, and Heavy-Duty Assembly
Hi-Pot and Functional Testing
Running of Epoxy Injection Molding Equipment
Clean Room Operations
In this function you will:
Follow established working procedures.
Set-up workstation to facilitate easier assembly and operate independently or on a group basis.
Complete paperwork, enter labor, confirm production and move products to outgoing materials zone.
Screen defective parts or make adjustments as necessary and report out any concerns to Team Leader or Supervisor.
Interact with other departments as needed for advice and decisions.
Assist QA/Engineering with problem solving for new product development as necessary.
Perform other related duties as assigned.
Qualifications:
Required (Basic) Qualifications:
High school diploma or GED from an accredited institution.
Minimum of 6 months of previous manufacturing, military, or related experience
Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area (50 miles) of the work location will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation.
Preferred Qualifications:
Minimum one (1) year of experience working in a manufacturing environment.
Trades training (or equivalent) of soldering and brazing operations, electronic terminology and symbols, and electrical circuits and electronics.
#IND123
#LI-SB2
Skills:
Ability to be flexible in work environment and perform multiple job functions within Department.
Ability to read blueprints and drawings.
Ability to use Microsoft word, excel, and other applications such as SAP.
Must be able to walk/stand for 8 hours shift with or without reasonable accommodation.
Must be able to lift 48lbs and push/pull 48 lbs. with or without reasonable accommodations.
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.
You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-8 to discuss your specific need. Only accommodation requests will be accepted by this phone number.
We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The hourly rate for this position is $22.50 per hour.
The hours for this shift are 10:30 pm - 6:30 am.
Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
What you'll do:
The Assembly position is responsible for performing a variety of diversified sub and light to heavy duty assembly operations on our switchgear product line. In this role, you will perform some complicated sub-assembly to final assembly operations, which contain a large number of parts and substantial fitting and aligning of components, utilizing bill of materials and prints as necessary - on a repetitive basis.
Key Processes Can Include:
Light, Medium, and Heavy-Duty Assembly
Hi-Pot and Functional Testing
Running of Epoxy Injection Molding Equipment
Clean Room Operations
In this function you will:
Follow established working procedures.
Set-up workstation to facilitate easier assembly and operate independently or on a group basis.
Complete paperwork, enter labor, confirm production and move products to outgoing materials zone.
Screen defective parts or make adjustments as necessary and report out any concerns to Team Leader or Supervisor.
Interact with other departments as needed for advice and decisions.
Assist QA/Engineering with problem solving for new product development as necessary.
Perform other related duties as assigned.
Qualifications:
Required (Basic) Qualifications:
High school diploma or GED from an accredited institution.
Minimum of 6 months of previous manufacturing, military, or related experience
Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area (50 miles) of the work location will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation.
Preferred Qualifications:
Minimum one (1) year of experience working in a manufacturing environment.
Trades training (or equivalent) of soldering and brazing operations, electronic terminology and symbols, and electrical circuits and electronics.
#IND123
#LI-SB2
Skills:
Ability to be flexible in work environment and perform multiple job functions within Department.
Ability to read blueprints and drawings.
Ability to use Microsoft word, excel, and other applications such as SAP.
Must be able to walk/stand for 8 hours shift with or without reasonable accommodation.
Must be able to lift 48lbs and push/pull 48 lbs. with or without reasonable accommodations.
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.
You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.
To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-8 to discuss your specific need. Only accommodation requests will be accepted by this phone number.
We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Not Specified
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Senior CAD Electrical Designer – Digital Infrastructure (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure - Remote flexibility with travel opportunities (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Senior Electrical CAD Engineer – Remote Data Center Design (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure - Remote work opportunity with international travel exposure (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) - Opportunity for Global Travel (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) - Flexible Work Environment with Travel Opportunities (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
temporary
DCI Test Development Engineer - Hybrid work flexibility (WASHINGTON)
🏢 JABIL CIRCUIT, INC
$105,100 - 189,200
Build your career with Jabil! We challenge and empower you to make most of your talents, working with outstanding colleagues from diverse backgrounds who share your drive and passion to make Jabil grow!
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do?
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here?
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.
Location/Division Specific Information – Austin, TX / USA - Remote
**This position supports hybrid work schedule depending on organization needs.**
How will you make an impact? –
Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.
What will you do?
- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures
How will you get here?
Education:
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required
Experience:
- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required
Knowledge, Skills, Abilities:
- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.
temporary
D
Quality Engineer 2 - Remote
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Not Specified
jobs by
