Engineering Structures Jobs in Charleston Sc Remote

About Bringardner Injury Law Firm

Bringardner Injury Law Firm represents seriously injured individuals and the families of those wrongfully killed across South Carolina. The firm was founded on an unwavering commitment to justice and to delivering the highest caliber of legal representation to those who need it most. We handle complex, high-stakes cases involving commercial trucking and vehicle collisions, dram shop liability, industrial and construction site accidents, and insurance bad faith - and we try cases when necessary to achieve the results our clients deserve.

The Position

We are seeking an experienced plaintiff's personal injury attorney to join our growing team. This is a meaningful role with real responsibility. The right candidate will handle a diverse caseload of serious personal injury and wrongful death matters from pre-litigation through trial. You will work directly on high-value cases, have access to firm resources and support, and be part of a collaborative, high-performance team that is committed to excellence in every aspect of legal practice. This is an opportunity for a skilled attorney who wants to do serious work, try cases, and build a long-term career at a firm that values and rewards performance.

Qualification Requirements

• Active membership in the South Carolina Bar.
• Minimum five (5) years of experience handling personal injury cases as a licensed attorney.
• Extensive pre-litigation and litigation experience, including depositions, motion practice, and comprehensive case management.
• South Carolina trial experience and plaintiff-side experience strongly preferred.
• Exceptional legal research, writing, and oral advocacy skills.
• Demonstrated commitment to ethics, client service, and practicing law at the highest level.
• A motivated self-starter with the drive to go above and beyond for clients and colleagues alike.
• Dedication to continuous learning and professional growth.

This position requires substantial experience and is not intended for entry-level candidates.

Compensation

• Highly competitive compensation structure commensurate with experience and demonstrated ability.
• Base salary with performance-based bonuses - compensation range $100,000 to $500,000+, with no ceiling for the right performer.
• Comprehensive benefits package covering the employee and dependents, including health, dental, vision, disability, and life insurance, plus 401(k) upon eligibility.
• Firm-subsidized professional development, including continuing legal education and memberships in professional and bar organizations.

All applications are kept strictly confidential. We are selective because we take this decision seriously — for our clients, our team, and the candidate. We are looking for the right long-term fit, not simply filling a seat. If you are an experienced plaintiff's attorney who is passionate about this work, committed to excellence, and ready to be part of something exceptional, we encourage you to apply.

We are hiring a Defense Litigation Paralegal for a business defense practice in Charleston. The firm handles high-stakes litigation where precision, technical expertise, and strategic thinking are the baseline. We are looking for a career-focused Litigation Paralegal to serve as a core member of the team.

The Role

In this position, you will work in direct partnership with the attorneys to navigate the complexities of business defense. This is a role for a paralegal who takes pride in high-level document production and seamless case management.

Your Responsibilities:

• Draft and finalize discovery requests, responses, subpoenas, and preliminary motions that require sharp legal analysis.
• Lead the e-discovery process, including document review, tagging, and synthesizing data for attorney use.
• Drive the preparation for depositions, hearings, and trials, ensuring all exhibits, witness materials, and tech are ready for the courtroom.
• Manage all aspects of electronic filing (State and Federal) and maintain proactive communication with court staff and opposing counsel.
• Diligently track and manage your billable hours, contributing directly to the firm's success.

Qualifications:

• A minimum of two years’ experience of litigation, preferably within business or insurance defense.
• Mastery of e-filing procedures and advanced proficiency in legal research and case management platforms.
• The ability to spot inconsistencies in discovery and anticipate the next phase of the litigation lifecycle.
• Exceptional written and verbal skills suited for high-level professional interactions.

Firm Benefits Include:

• Health insurance
• Three weeks of paid vacation
• Structured bonus program and salary reviews.

If you are ready to apply your specialized litigation skills in a focused and rewarding role, we want to hear from you. Apply today for a Litigation Paralegal!

Pain Management Physician (MD or DO)

Monday – Friday | 8:00 AM – 5:00 PM | No nights, weekends, or call

About the Opportunity

Join one of the fastest-growing interventional pain management organizations in the country, an established leader in outpatient-based care, clinical innovation, and physician partnership.

Our model is built on helping patients achieve long-term pain relief, reduce dependence on narcotic medications, and improve quality of life through advanced, minimally invasive procedures.

This is an opportunity to join a collaborative team that values patient outcomes, physician growth, and ownership in your practice.

What You’ll Do

• Provide comprehensive interventional pain management services in both clinic and ASC settings
• Perform procedures such as spinal and joint injections, nerve blocks, and stimulator implants
• Evaluate, treat, and follow up with patients using evidence-based care plans
• Collaborate with experienced APPs and medical assistants to streamline patient flow
• Contribute to ongoing clinical research and continuous improvement initiatives

Compensation & Ownership Model

• Base Salary: Fully guaranteed, based on experience
• Production-Based RVU Model: Earn $75K–$125K+ annually in additional compensation, paid out once per year
• Minority Equity Ownership: Physicians may be offered the opportunity to buy into their ASC, depending on location and situation
• Quarterly Equity Distributions: Typically recoup the initial investment within 1.5 years, with long-term earnings that scale significantly over time

Each location maintains a dedicated physician partner, generally owning approximately 20% equity, depending on location

Typical Week

• 3 days per week in clinic (new patients & follow-ups, 20–25 per day)
• 2 days per week in the ASC (procedures, 18–20 per day)
• Dedicated support: ~3 MAs per physician, experienced APPs, front office, and lab staff
• EMR: eClinicalWorks
• No hospital rounding or inpatient responsibilities

Ideal Candidate

• Board Certified / Board Eligible in Pain Management
• MD or DO with an active or eligible state medical license
• Strong procedural proficiency and clinical judgment
• Entrepreneurial mindset with an interest in practice growth and potential ownership
• Excellent communicator who thrives in a collaborative, fast-growing environment

Why This Group?

• Physician-led organization focused on innovation, outcomes, and professional growth
• Leadership team that includes practicing physicians and ASC operators
• Collaborative care model with advanced resources, cutting-edge equipment, and national-scale support
• Commitment to research and clinical advancement that’s shaping the future of interventional pain medicine

Next Steps

Interested in learning more?

Submit your CV or reach out to schedule a confidential introductory conversation with our leadership team to discuss available locations, compensation structure, and the ownership pathway in more detail.

ABOUT US:

At Rodgers, we’re not just building structures — we’re building the future of the Carolinas. From hospitals that heal to campuses that educate, our work shapes the communities where we live and serve. As a leading construction manager in the Southeast, we take pride in delivering meaningful projects that improve lives, spark innovation, and stand the test of time.

As a Rodgers team member, you’ll be part of a company known for safety, quality, and making an impact that lasts. With a comprehensive benefits package, a culture that puts people first, and opportunities to grow alongside some of the most experienced professionals in the industry, you’ll join a team that shares one cohesive mission: to build buildings with purpose, to build relationships with integrity, to build people who lead, and to build communities with care.

WHAT YOU'LL BRING:

• 5+ years of experience in commercial or healthcare construction (majority of the time as an assistant superintendent or superintendent)
• Experience in establishing building layout and control
• Proficient in document change and RFI management
• Ability to maintain a high level of quality throughout
• Experience working in occupied buildings
• Strong leadership skills, ability to mentor and train others
• Excellent problem-solving skills and ability to adapt to changing needs
• Strong focus on conflict resolution
• OSHA 30-hour trained

WHAT YOU'LL DO:

• Ensure safe practices are used in the execution of project work
• Help train, mentor, and develop the skills of team members
• Assist with the development and communication of the project plan to include the project schedule, site logistics, safety, and quality programs
• Schedule and conduct inspections with local authorities
• Supervise installations in conjunction with construction documents, including but not limited to coordination drawings, shop drawings, specifications, submittals, RFI’s, etc.
• Maintain a safe, secure, clean, and organized job site
• Ensure and review quality of weekly project safety checklist
• Ensure all team members are participating and running daily safety huddles
• Conduct and supervise project meetings
• Ensure completion of Standards of Excellence quality checklists at appropriate times
• Supervise the completion of quality control/punch list issues throughout the project
• Provides schedule updates and/or comments to owner/design team
• Coordinate the work of multiple subcontractors and lead subcontractor coordination meetings regularly
• Create and review completion and accuracy of construction daily reports
• Conduct planning and maintenance of shutdowns and tie-ins
• Maintain daily reports using 360 Field
• Assist in resolving construction issues to maintain the productivity of subcontractors

The above description covers the principal duties and responsibilities of the job. The description shall not, however, be construed as a complete listing of all miscellaneous, incidental, or similar duties which may be required from day-to-day. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EOE/Vets/Disabilities

BENEFITS:

• Comprehensive benefit package:
• Medical, Dental, and Vision Insurance
• Telehealth
• Paid Days Off, Sick Days Off, Paid Holidays, Floating Holidays
• Jury Duty Leave
• Family Leave
• Paid Parental & Pregnancy Leave
• Short/Long-Term Disability
• Pre-tax Insurance Premium Plan
• Life and Accidental Death Insurance
• Retirement Plan
• Education and Training Reimbursement
• Pet Insurance
• Gym Membership Reimbursement
• Employee Assistance Program
• Legal & ID Theft Services
• Competitive Salary
• Employee Referral Program

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is hiring for Senior Product Review Engineers (Liaison Engineers) to join the 787 Production Engineering team located in North Charleston, SC.

This position includes a 9-to-12-month Boeing Training Rotation Program and will require a flexible schedule, which may involve assignments on 1st, 2nd, or 3rd shift, as well as occasional overtime, weekends, or holidays based on business needs.

The Product Review Engineers will perform/support troubleshooting, Root Cause Corrective Action (RCCA) technical analysis, and provide solutions to non-conforming products. They will work directly with cross functional and production engineering teams to meet production program objectives.

This position involves daily exposure to a factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of building.

Position Responsibilities:

• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle
• Leads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions
• Leads others to analyze, conduct root cause analysis and develop dispositions for design non-conformances
• Uses innovative approaches and unique applications to address complex nonconforming conditions and to detect deviations
• Analyzes reported problems for potential safety issues; recommends and manages complex resolutions. Leads development of interim and final solutions.
• Provides design phase subject matter expertise by supporting Integrated Product Teams (IPT) and participating in design reviews
• Represents the engineering community in the build through post-production environment
• Develops customer correspondence for continued safe operation and maintenance of equipment
• Leads activities for on-site disabled product repair teams and accident investigation or support teams
• Designs appropriate jacking and shoring schemes
• Leads the design of interim structural repairs and conducts static strength analysis
• Develops and leads non-destructive test procedures, tools and standards

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics or Chemistry. Applicants must have completed all degree requirements by the application date.
• 10+ years of Engineering experience
• 5+ years of experience in one or more of the following engineering fields: (airplane systems, aerodynamics, structures, propulsion, systems engineering, certification, or safety)
• 5+ years of experience in reading, interpreting, and generating electrical schematics and technical specifications 
• Experience with or knowledge of structural design principles for aircraft primary structure (e.g., fatigue, damage tolerance, corrosion, stress analysis, statics, materials strength, material characteristics, and repair techniques)
• Must be willing to work variable shifts, including weekends, holidays, and overtime

Preferred Qualifications (Desired Skills/Experience):

• ABET accredited degree
• 5+ years of experience working in a cross-functional environment
• Current or Previous Member of the Materials Review Board (MRB)
• Previous Aerospace or Marine repair, overhaul, maintenance, and/or engineering experience
• Experience troubleshooting complex integrated systems
• Experience interpreting and creating strength analyses for metals and composite materials
• Material Review Board Certification experience or similar Liaison Engineering experience.
• Aerospace experience, fabrications, manufacturing, and/or additive manufacturing experience.
• Experience working with Notice of Escapements (NOE) and Request for Customer Notifications (RCN)
• Production engineering experience
• Relevant technological knowledge
• Excellent problem-solving skills
• Ability to lead, work independently and in a team environment

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range: $126,650 - $171,350

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) 787 Airframe Team is seeking Mechanical & Structural Engineering Managers (Level K) to join our Wing, Wing Edges, or Empennage Life Cycle Product Teams (LCPT)in North Charleston, SC.

As the Engineering Manager, you will lead a team of analysis engineers supporting the 787 Aircraft Systems or Payloads. The statement of work will include future design, factory and fleet support, as well as interaction with the supply chain. 

The ideal candidate is a proactive, servant-minded leader who fosters a positive, collaborative work environment through clear communication, mentoring, and coaching. They will effectively manage multiple concurrent initiatives including both short and long-term assignments, build strong cross-functional relationships and promote a culture of engineering excellence and safety. Using sound engineering judgment, this leader will guide their team to deliver efficient, practical solutions that satisfy product safety requirements and business objectives.

This position may require domestic and international travel as needed (approximately 10%) to support business and program goals.

Primary Responsibilities:

• Staff and budget planning, as well as implementing best practices in program management

• Develop and execute business plans, policies, and procedures while formulating organizational and technical strategies

• Acquire resources, provide technical management of suppliers, and spearhead process improvements

• Build and maintain relationships with customers, stakeholders, peers, partners and direct reports will be essential

• Provide oversight and approval of technical approaches, products and processes, while managing, developing, and motivating employees

• Mentor and develop team member's technical and leadership capabilities

• Help facilitate daily team stand ups utilizing OPD best practices

• Proactive collaboration with customers and support organizations, build positive relationships (i.e. LE, Prod. Engineering, Operations, Fleet Support teams)

• Manage daily team priorities to effectively utilize team resources

• Communicate with lead engineers, management and team members

• Establish clear RAA for lead engineers, foster and develop lead pipeline

• Develop and execute business plans, policies and procedures and develop organizational and technical strategies

• Support hiring of engineering team

• Provide technical guidance and oversite to team and partner

• Maintain and update BOE/EAC/LRBP tools and process

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace, Aeronautical, or Material Sciences)

• 5+ years of experience in the Aerospace Industry

• 1+ years of experience leading cross-functional teams

• 1+ years of experience in using project management methodologies, including developing project plans, performance management, and managing issues and risks

• Experience managing projects and initiatives through to their completion/implementation hand-off point

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of experience leading aerospace design engineering teams and integrating within a global supply base and product value streams

• 3+ years of experience with Boeing Commercial Airplanes

• Knowledge of Boeing products and processes

• Knowledge of Boeing 787 Aircraft Wing, Wing Edges, or Empennage Structure

• Knowledge of Boeing Structural Analysis Methods

• Knowledge of Boeing Structural Design Principles

• Experience with commercial aircraft certification processes and regulations

• Demonstrated ability in team building, coaching, and employee development to enhance team performance and engagement

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $137,700 - $186,300

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Technology Innovation is seeking a highly skilled and motivated Senior Structural Engineer to join our Materials & Structures Organization in North Charleston, SC.

The ideal candidate will possess a strong background in the analysis of aircraft structures and materials, with expertise in both composite and metallic structural analysis, structural design, and/or structural repair. This role requires a dynamic individual who can lead research initiatives, capture external contracted research and development (CRAD) programs, and collaborate effectively with cross-functional teams to address challenges relevant to Boeing platforms.  The ideal candidate will be a recognized expert in their field with a demonstrated history of working across the aerospace industry, academia, and the US Government to develop and execute impactful R&D programs. 

Position Responsibilities:

• Conduct advanced research and analysis on aircraft structures, focusing on composite or metallic materials.

• Lead efforts to capture and manage external CRAD programs, ensuring alignment with Boeing's strategic objectives.

• Collaborate within the structures and materials teams as well as Boeing program partners to identify, analyze, and solve complex engineering problems.

• Develop and implement innovative solutions to enhance the performance and reliability of Boeing platforms.

• Establish and lead research programs, guiding teams of engineers to successfully execute projects.

• Engage with both defense-related programs and commercial projects, requiring the ability to obtain a Department of Defense security clearance.

• Communicate research findings and project progress to stakeholders, including technical and non-technical audiences.

• Stay abreast of industry trends and advancements in materials and structural analysis to drive continuous improvement.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• Experience capturing and managing external CRAD programs

• Experience working across cross-functional teams and external customers

• Experience leading research and development teams and programs

• Experience leading technical teams

• Experience in structural analysis methods and tools such as Finite Element Analysis

• Linear and Non-linear FEA experience

Preferred Qualifications (Desired Skills/Experience):

• 15+ years of related work experience or an equivalent combination of education and experience

• Advanced Engineering degree

• Experience in the analysis of aircraft structures, with a focus on composite and metallic materials

• Experience with defense-related programs and commercial aerospace projects

• Experience with industry-standard software and tools for structural analysis

• A track record of published research in relevant fields

• Excellent communication skills, both written and verbal

• Experience developing FEA and non-FEA analysis tools, examples include Abaqus UMATS and VUMATS, python scripting, etc.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range: $149,600 - $202,400

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Job Title: Structure & Payload Design Engineer

Employing Entity: The Boeing Company

Job Location: 5400 International Boulevard, North Charleston, SC 29418

We are looking for an experienced Structure & Payload Design Engineer in North Charleston, SC.

The selected candidate will Develop, maintain, integrate, modify, and document structural and interior payload system requirements to establish system designs for the Boeing 787 program using three-dimensional computer aided design tools

Position Responsibilities:
•    Develop, maintain, integrate, modify, and document structural and interior payload system requirements to establish system designs for the Boeing 787 program using three-dimensional computer aided design tools. 
•    Collaborate with internal and external technical experts, certification experts, supplier management, and program leaders to establish the technical direction of assigned projects. 
•    Provide product definition to other engineering groups, production operations, suppliers, and external customers throughout the product lifecycle. 
•    Conduct and analyze tests to validate and verify systems and components meet regulatory requirements and engineering specifications. 
•    Manage complex design problems, investigate aircraft manufacturing issues, and resolve reported problems. 
•    Coordinate with suppliers to optimize designs and achieve program goals. 
•    Investigate emerging technologies to develop concepts for future product designs and innovations to meet projected requirements

Multiple positions available.

Basic Qualifications (Required Skills/Experience):

Bachelor’s degree or foreign equivalent in Mechanical Engineering, Aerospace Engineering, or other related engineering discipline plus five years of progressive post-baccalaureate experience, and five years of experience with each of the following:
•    Designing Boeing 787 or Airbus 350 interior payload systems
•    Three-dimensional modelling of interior payload systems using CATIA;
•    Developing root cause corrective actions and installation plans for the modification of designs or production;
•    Complying with Federal Aviation Administration airworthiness standards; and
•    Composite material properties for the Boeing 787 aircraft

Alternatively, employer will accept Master’s degree or foreign equivalent in Mechanical Engineering, Aerospace Engineering, or other related engineering discipline plus three years of professional experience as an Engineer or related occupation, and three years of experience with each of the following:
•    Designing Boeing 787 or Airbus 350 interior payload systems
•    Three-dimensional modelling of interior payload systems using CATIA;
•    Developing root cause corrective actions and installation plans for the modification of designs or production;
•    Complying with Federal Aviation Administration airworthiness standards; and
•    Composite material properties for the Boeing 787 aircraft

Relocation: 
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace: 
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Summary pay $151,195 per year.

This position is for 1st shift.

TO APPLY: Please click “Apply Now” Button
 

Applications for this position will be accepted until May. 02, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

787 Airframe in Boeing Commercial Airplanes is hiring for a Mid-Level (Level 3) or Experienced (Level 4) Structural Analysis Engineer for our Wing, Wing Edges, Empennage, Systems Stress, or Interiors Stress teams to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer.

Primary Responsibilities:

• Develops, integrates and documents structural requirements to establish the system design.

• Coordinates with other engineering groups to establish the product's environment.

• Guides product design and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.

• Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications.

• Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied.

• Supports in-service products by investigating failures and analyzing improvements.

• Works under general direction.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at the North Charleston, SC location.

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• 5+ years of experience in the structural or aerospace industry

• 3+ years of experience performing structural analysis on metallic structures

• 2+ years of experience performing structural analysis on composite material systems

• 2+ years of experience working on primary aircraft structures

• 2+ years of experience collaborating and performing oversight on projects with international partners/suppliers

• 1+ years of experience supporting test development and execution

• Ability to apply classical hand analysis methods

• Ability to perform FEA and understand/utilize/validate results

• Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems

Preferred Qualifications (Desired Skills/Experience):

• Works under general direction.

• 5+ years of experience performing the primary responsibilities in a lead capacity working under minimal direction

• 2+ years of experience developing certification related documentation

• 2+ years of experience developing or leading test execution

• 1+ years of experience developing analytical processes or tools

• Current or prior DER/AR/E-UM

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This role is for 1st shift, however, there may be additional shift requirements to support program objectives

Pay Range Summary:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range for Mid-Level (Level 3): $103,700 – $140,300

Summary pay range for Experienced (Level 4): $126,650 – $171,350

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 5) Structures Design Engineer for our Wing, Wing Edges, or Empennage teams to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer.

Primary Responsibilities:

• Provides oversight and direction to develop, integrate and document structural and interior payload system requirements to establish the system design.

• Leads development, maintenance and modification of structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

• Leads performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications.

• Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals.

• Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort.

• Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

• Works under consultative direction.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at the North Charleston, SC location.

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• 12+ years of experience with aircraft structural design

• 9+ years of experience using CAD Tools on Model Based Definition for primary structures

• 9+ years of experience in program execution from concept development, design reviews, verification and qualification, hardware/software delivery and sustainment

• 6+ years of experience leveraging CATIA, ENOVIA, and PDM systems to support complex aerospace product design, configuration control, and lifecycle management.

• 3+ years of experience collaborating and performing oversight on projects with international partners/suppliers

• 3+ years of experience supporting test development and execution

• Part 21 and Part 25 Code of Federal Regulations subject matter expert knowledge

• Consultant level demonstrated autonomy while working with leadership and cross-functional technical teams

Preferred Qualifications (Desired Skills/Experience):

• 5+ years of experience as a Design Approval Engineer (DAE)

• 3+ years of lead experience using CATIA and Model Based Definition (MBD) for primary structure design

• 3+ years of lead experience designing and qualifying composite primary and secondary structures, including laminate design, ply-drop strategies, and structural strength considerations

• 3+ years of experience working in Product Development, Production, and Fleet phases of the Product Life Cycle

• 3+ years of hands-on experience with fabrication of metallic and composite structures

• 3+ years of experience interacting with Federal Regulators

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This role is for 1st shift, however, there may be additional shift requirements to support program objectives

Pay Range Summary:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range for Senior (Level 5): $154,700 – $209,300

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Preferred three to five (3 to 5) years of experience in implementing and managing Windows and Open Systems server infrastructure hybrid cloud solutions in an enterprise environment; healthcare experience preferred.
• Highly experienced information systems professional with a strong technical background and proven track record of accomplishments in a large, complex multi-level organization .
• Strong technical knowledge of VMWare ESX and Microsoft Hyper-V.
• Expertise in Microsoft Windows, Linux and AIX operating systems and management.
• Familiar with hyperconverged infrastructures such as VxRail.
• Familiar with Microsoft Azure Arc, System Center, Admin Center and SCCM.
• Familiar with cloud platforms (e.g., AWS, Azure, Google Cloud).
• Experience in infrastructure-as-code (e.g., Terraform, CloudFormation) and containerization (e.g., Docker, Kubernetes).
• Experience in scripting (PowerShell, Python, Bash, etc.)
• Familiar with application delivery solutions such as Citrix.
• Experience with storage and data protection replication methodologies.
• Experience with Epic Infrastructure such as Hyperspace.
• Experience with ITSM functionalities such as change control, CMDB and ticketing systems.
• Strong knowledge of healthcare information systems (e.g., Epic, Cerner), cybersecurity and clinical operations.
• Prior experience delivering high availability systems in a 24/7 environment across geographically dispersed business units.
• Demonstrated ability to facilitate evaluation of technologies and achieve consensus on technical standards and solutions among a diverse group of information technology professionals.
• Demonstrated commitment to customer service who has provided responsive and effective support, developed solid working relationships with customers, and delivered high quality, value-added services that met/exceeded customer expectations.
• Equally adept at developing technology strategies and the operation of existing technical infrastructures. Significant experience and knowledge of computing architecture and implementation of networked computing structures.
• Polished professional with demonstrated information technology experience and strong communication skills that can rapidly gain and maintain credibility with customers and IT colleagues.
  
  

• Bachelor’s degree in Information Technology, Computer Science, Healthcare Administration or related field strongly desired or an equivalent combination of education and experience.
  
  

• Preferred certifications include Microsoft Certified: Azure Fundamentals, VCP-DCV, ECSA.
  
  

• Responsible for installation and maintenance of server infrastructure along with upgrading/configuration and the life cycle management of hardware.
• Monitors functions of server infrastructure to ensure acceptable performance.
• Creates and maintains documentation related to server configuration and environments.
• Serves as subject matter expert across server operating systems and solutions (Microsoft Windows Server, Linux, AIX, VMWare ESX, Microsoft Hyper-V)
• Troubleshoots and resolves server and virtualization incidents.
• Maintain server patching to address security vulnerabilities.
• Collaborate with cloud compute architect to design and build functional server environments.
• Provide level 2 escalation support and troubleshooting to resolve complex server incidents and tasks.
• Stay current on cloud and systems engineering trends (e.g., serverless computing, containerization, AI-driven automation) and evaluate their potential to enhance TGC operations.
• Ensure systems, applications and data are high availability, backed up and/or replicated to meet disaster and business recovery requirements.
• Implement and enforce security requirements to protect Azure-based systems and data.
• Anticipates and provides solutions for complex problems and issues, recommends upgrades and enhancements. Rapidly absorbs complex technical and conceptual information to identify issues and implications. Able to present understandable alternatives to both technical and non-technical individuals at all levels of the organization.
• Monitors industry trends, maintains knowledge of developments in cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
• Promotes the use of TGC’s PMO methodology and standards to manage IT initiatives.
• Demonstrates commitment to customer service by providing responsive and effective support, developing solid working relationships with customers and IT colleagues, and delivering high quality, value-added services that exceed customer expectations.
• Demonstrates a commitment to excellence in Customer Service with all internal and external customers of TGC.
• Performs related duties as assigned and unrelated duties as requested.
  
  

*Securian Financial Groups internal position title isEngineering Senior Analyst. It is eligible to be hired at the Senior Analyst or Consultant levels depending on the skills, experience, and qualifications of the candidate.

Position Summary:

Securian Financial is seeking a motivated Financial Systems Engineer to join our Financial Product Ecosystem (FPE) team, where you'll help shape the future of the enterprise-wide SAP financial system. In this hybrid role, you'll collaborate with cross-functional teams to define requirements, enhance systems, and drive innovation in an agile environment. Ideal for someone with a background in software development and a passion for continuous learning, this position offers the opportunity to grow expertise in SAP technologies while making a tangible impact on financial operations and decision-making.

Responsibilities include but not limited to:

Product & Stakeholder Collaboration

• Partner with Product Owners, System Architects, and business stakeholders to define user stories and deliver effective solutions in an agile environment.
• Own and manage incoming projects, ensuring alignment with business goals and timelines.

System Enhancement & Support

• Lead enhancements and troubleshoot issues across the SAP ecosystem.
• Support batch process resolution, including job setup, updates, and root cause analysis. This includes participation in an overnight on-call rotation quarterly for a total of approximately 2-3 weeks a quarter, supported by a collaborative team structure.

Quality & Documentation

• Ensure deliverables are testable, well-documented, and meet the needs of both technical and non-technical audiences.
• Assist with audit and security activities to maintain data integrity and compliance.

Technology Leadership & Learning

• Serve as a technical thought leader for current and future solutions, driving adoption and innovation as well as bridging the gap between technical work and business functional knowledge.
• Build expertise in SAP technologies including:
• Core SAP Tools: ABAP and FPSL (Financial Product Sub-Ledger)
• Programming & Integration: Java, Python, REST, SOAP, ABAP, HANA SDI
• Scheduling & Reporting: Control-M, SAP Fiori Tiles

Continuous Improvement

• Stay ahead of evolving technologies and proactively identify opportunities to improve system performance and user experience.

Qualifications:

• Previous experience working with financial systems such as SAP.
• Hands-on software development experience, including configuring and debugging enterprise applications using technologies such as Java, Python, REST, and SOAP.
• Familiarity with platforms such as AWS, ABAP, and HANA SDI, with a demonstrated ability to quickly ramp up in new tools.
• Strategic and analytical thinker with strong creative problem-solving skills and attention to detail.
• Experienced in agile methodologies with the ability to adapt to shifting priorities and manage multiple tasks under pressure.
• Advanced communication, facilitation, and interpersonal skills to engage diverse stakeholders and lead discussions effectively.
  

Preferred Qualifications:

• 3-6 years of experience as an engineering or product analyst, with a proven track record of delivering measurable business outcomes.
• Hands-on experience with SAP modules such as ABAP and FPSL.
• Bachelor's degree in Computer Science, Finance, Business, or a related field.
• Proficient in Control-M for batch scheduling and SAP Fiori Tiles for operational reporting.
• Strong understanding of batch processing, auditing practices, and financial/operational reporting workflows.
• Proven ability to communicate effectively with customers and stakeholders to ensure alignment with business goals.
  

#LI-Hybrid**This position willhave a hybrid working arrangement, workingin-officefor a minimum of3days aweek.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Kalamazoo, MI / Remote (U.S.)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22
#Remote

PI7087748e2d7e-3631