Engineering Structures Jobs in Alameda Ca Remote

909 positions found

Lecturer Pool (Part-time) - Civil and Environmental Engineering
✦ New
Salary not disclosed
Berkeley, CA 1 day ago
Position overview

Salary range:
The UC academic salary scales set the minimum pay at appointment. See the following table for the current salary scale for this position: . The current full-time salary range for this position is $75,301 - $199,722. Starting salary will be commensurate with highest degree, past college-level teaching experience, relevant industry experience and equity within the department.

Percent time:
11-100%

The percentage of the appointment will vary, depending on the number of sections taught. Positions are typically part-time.

Instructors teaching one 3-5 unit course during summer sessions will normally be appointed at 11% time.

Instructors teaching one course with three hours of lecture per week during the semester will normally be appointed at 33% time; exact percentages depend on contact hours and other assigned duties.

Anticipated start:
Spring semester (only): 1/1/2026-5/31/2026

Fall semester (only): 8/1/2025-12/31/2025

Academic-Year Appointments: 7/1/2025-6/30/2026

Lecturers hired to teach during summer sessions are employed between May and August.

Review timeline:
The review of applications for spring semester appointments will be in October, for summer sessions in April, and for fall semester appointments in May.

Position duration:
Positions may be for one semester or for the full academic year.

Application Window


Open date: June 10, 2025




Most recent review date: Tuesday, Jun 24, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.




Final date: Thursday, Oct 1, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.



Position description

The Department of Civil and Environmental Engineering at the University of California, Berkeley is generating a new applicant pool of qualified temporary instructors and invites applications for a lecturer position to teach courses in our department in the areas of Energy, Civil Infrastructure and Climate; Constructions Systems; Environmental Engineering; GeoSystems Engineering; Structural Engineering, Mechanics and Materials; Systems (Civil Systems); and Transportation Engineering.



This pool is being generated in case of need to accommodate upcoming course needs and new applicants. We plan to hire for the Spring semester, Summer Sessions , and the Fall semester, if the need arises. Candidates under consideration will be contacted by our department. Selected candidates will hold the title of Lecturer.



Applicants are considered for positions as needs arise; the existence of this pool does not guarantee that a position is available.



General Duties:

In addition to classroom/laboratory teaching and preparation, general duties may include (but are not limited to) managing and mentoring graders and/or graduate student instructors (teaching assistants), holding office hours, assigning grades, advising students, preparing course materials (e.g., syllabus), and maintaining course website.



Those interested in remaining in the pool beyond the final date will need to reapply.



Department:

Department: courses/civ_eng/



Qualifications

Basic qualifications (required at time of application)

Bachelor's degree or equivalent international degree is required at time of application.



Additional qualifications (required at time of start)

The following additional qualifications are required by the start of the job. Advanced degree or five years of teaching and/or industry experience. Applicants must be eligible to work in the U.S.A.



Preferred qualifications

Ph.D. or equivalent international degree in an engineering discipline (or related field), experience in the field of Civil and Environmental Engineering and prior teaching experience is preferred. Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.



Application Requirements

Document requirements

  • Curriculum Vitae - Your most recently updated C.V.


  • Cover Letter


  • Past Teaching Evaluations or Statement of Teaching (or other evidence of teaching experience and quality) - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.




Reference requirements
  • 2 required (contact information only)


Apply link:
JPF04969

Help contact:



About UC Berkeley

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.



The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.



For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.



In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.



As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.


Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.



As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.




  • "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  • UC Sexual Violence and Sexual Harassment Policy
  • UC Anti-Discrimination Policy
  • APM - 035: Affirmative Action and Nondiscrimination in Employment


Job location
Berkeley, CA
temporary
Structural Design Engineer - Experienced/Senior (Berkeley)
🏢 Boeing
Salary not disclosed

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorStructural Design Engineers to develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

  • Develop, integrate and document structural and interior payload system requirements to establish the system design
  • Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
  • Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications
  • Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
  • Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort
  • Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
  • Work under general direction

Level 4

  • Develop, integrate and document structural and interior payload system requirements to establish the system design
  • Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
  • Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
  • Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
  • Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements
  • Work under minimal direction

Basic Qualifications (Required Skills / Experience):

  • Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
  • Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
  • Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
  • Experience using NX / Teamcenter and familiarity with reading 2-D drawings
  • This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

  • Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

  • Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
  • Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Not Specified
Electrical Engineering Manager
✦ New
Salary not disclosed
San Francisco, CA 1 day ago

Electrical Engineering Manager

Ground Systems - Autonomous flight


Salary: Flexible +equity

Location: San Francisco (generous relocation package available)


The Role - Electrical Engineering Manager

This technical leader will guide and grow these teams as well as be able to own parts of the design directly as the team scales. You and your teams will be responsible for architecting and developing custom Printed Circuit Board Assemblies (PCBAs), integrated sensing and RF solutions


Responsibilities - Electrical Engineering Manager

  • Be the electrical engineering technical leader for ground systems design including low voltage electronics and PCBA development, power electronics and RF systems
  • Build your teams by hiring and coaching world class engineers
  • Design and validate to safety and certification standards
  • Liaise with other technical leaders both within and outside of the Ground Systems Hardware
  • Leverage your technical leadership experience in hardware design
  • Establish best practices, standards, and design and release review processes


Experience and skillset - Electrical Engineering Manager

  • 8+ years of demonstrated experience with electronics designs and system integration
  • 2+ year leading a technical engineering team, and direct hiring management experience
  • Working with products across various stages of development, from prototype - production
  • Ability to operate in ambiguous and fast paced environments
  • Experience in either Low voltage digital circuit design and/or power electronics design
  • You’re hands-on with hardware; you know your way around tools


All successful Electrical Engineering Managers will be contacted within 2 days of application

Not Specified
Lecturer Pool- Nuclear Engineering- College of Engineering
🏢 University of California-Berkeley
Salary not disclosed
Berkeley, CA 3 days ago
Position overview

Salary range:
The UC academic salary scales set the minimum pay at appointment. See the following table for the current salary scale for this position: . The current full-time salary range for this position is $75,301 - $199,722. Starting salary will be commensurate with highest degree, past college-level teaching experience, relevant industry experience and equity within the department.

Percent time:
Lecturers: 11% - 100%

TSP: Hourly (4-40 hours per week)

The percentage of the appointment will vary, depending on the number of courses taught.

Anticipated start:
Positions usually start in January, various times throughout the summer and August

This pool will remain open until the final date to accommodate upcoming course needs and new applicants.

Applicants are considered for positions as needs arise; the existence of this pool does not guarantee that a position is available

Review timeline:
Appointments for the Fall semester are usually reviewed in April and for the Spring semester in October.

Position duration:
Positions may be for one semester or for the full academic year.

Application Window


Open date: August 20, 2025




Most recent review date: Thursday, Sep 4, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.




Final date: Thursday, Aug 20, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.



Position description

The Department of Nuclear Engineering at the University of California, Berkeley is generating an applicant pool of qualified temporary instructors to teach regular and Summer Session courses, should an opening arise. In addition to classroom/laboratory teaching and preparation, general duties may include (but are not limited to) managing and mentoring graders and/or graduate student instructors (teaching assistants), holding office hours, assigning grades, advising students, preparing course materials (e.g., syllabus), and maintaining a course website.



We are also seeking applicants for hourly Teacher Special Programs (TSP), should an opening arise. The TSP instructor's principal responsibility will be overseeing capstone projects in the Master of Engineering (MEng) program of the Nuclear Engineering Department. This will include the following tasks: Designing and proposing capstone projects. Helping match students into suitable projects. Meeting with each capstone project team on a regular basis to review results, manage interpersonal aspects, and maintain efficient progress. Provide critical, constructive feedback on students' written reports and oral presentations. Coordinating and participating in the MS Plan II exam of each student at the end of the capstone project period.



Department:



Qualifications

Basic qualifications (required at time of application)

Master's degree or equivalent international degree at the time of application.



Additional qualifications (required at time of start)

For Lecturers: Five years of experience in industry or a

research institute, or a Ph.D. or equivalent international degree by the start of the appointment.



For TSPs: Two years of experience in industry or a research

institute, or a Ph.D. or equivalent international degree by the start of the appointment.



Preferred qualifications

Lecturer Positions:



Demonstrated excellence in teaching

Experience teaching college-level courses

A higher-level degree and/or prior teaching experience is preferred in one of the following specializations.

Specializations include, but are not limited to:



Nuclear Engineering

Nuclear Physics, Nuclear Reactions, Nuclear Detection

Radioactive Waste Management

Nuclear Fuel Cycle

Radiation Biological Effects, Dosimetry, Radiation Protection

Radiation Transport, Reactor Physics

Engineering Thermodynamics

TSP Positions: Mentoring experience in one or more of the related engineering fields/specializations or comparable experience/training.



Nuclear

Mechanical

Chemistry

Physics, etc.

Experience in supervising teams of researchers at the graduate level and experience working in industry and/or a research institute.



Application Requirements

Document requirements

  • Curriculum Vitae - Your most recently updated C.V.


  • Cover Letter - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.


  • Statement of Teaching - Summary of Teaching experience/philosophy for lecturer positions or Mentoring/teaching statement for TSP positions.




Reference requirements
  • 2 required (contact information only)


Apply link:
JPF04980

Help contact:



About UC Berkeley

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.



The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.



For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.



In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.



As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.


Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.



As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.




  • "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  • UC Sexual Violence and Sexual Harassment Policy
  • UC Anti-Discrimination Policy
  • APM - 035: Affirmative Action and Nondiscrimination in Employment


Job location
Berkeley, CA
Not Specified
Lecturer Pool - Mechanical Engineering & Aerospace Engineering - College ofEngineering
✦ New
🏢 University of California-Berkeley
Salary not disclosed
Berkeley, CA 1 day ago
Position overview

Salary range:
The UC academic salary scales set the minimum pay at appointment. See the following table for the current salary scale for this position: . TSP hourly rate $65. The current full-time salary range for Lecturer positions is $75,301 - $199,722. Starting salary is commensurate with highest degree, teaching experience, and equity within the department.

Percent time:
Lecturers: 7% to 100% in any given semester

TSP: Hourly (4 -40 hours per week)

Anticipated start:
Positions usually start in January, various times throughout the summer and August.

Position duration:
Positions can be one semester or academic year

Application Window


Open date: July 1, 2025




Most recent review date: Friday, Sep 26, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.




Final date: Wednesday, Jul 1, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.



Position description

We are generating an applicant pool of qualified temporary instructors to teach regular and Summer Session courses, should an opening arise. In addition to lecturing responsibilities, general duties for these positions include laboratory teaching, holding regular office hours, assigning grades, advising students, and preparing course materials and exams.



We are also seeking applicants for Teacher Special Programs (TSP), should an opening arise. TSP instructors will be responsible for overseeing capstone projects in the Master of Engineering (MEng) program in the Department Mechanical Engineering. This includes: design and propose capstone projects and help match students into suitable projects. Meet with each capstone project team on a regular basis to review results, manage interpersonal aspects, and maintain efficient progress. Provide critical, constructive feedback on students' written reports and oral presentations. Coordinating and participating in the MS Plan II exam of each student at the end of the capstone project period. This pool encompasses engineering science and technology specializations relevant to both mechanical engineering and aerospace engineering.



Applicants are considered for positions as need arise; the existence of this pool does not guarantee that a position is available.



If you wish to remain in the pool after the final date, you will need to reapply.



Department:



Qualifications

Basic qualifications (required at time of application)

Basic qualifications for both positions: Master's degree or equivalent international degree at the time of application.



Additional qualifications (required at time of start)

Additional qualifications for both positions: Ph.D. or equivalent international degree by the start of the appointment and one or more years of teaching experience at the graduate level.



Preferred qualifications

Teaching experience offering undergraduate or graduate courses.



Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy



Application Requirements

Document requirements

  • Curriculum Vitae - Your most recently updated C.V.


  • Cover Letter


  • Statement of Teaching - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy




Reference requirements
  • 2 required (contact information only)


Apply link:
JPF04971

Help contact:



About UC Berkeley

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.



The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.



For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.



In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.



As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.


Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.



As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.




  • "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  • UC Sexual Violence and Sexual Harassment Policy
  • UC Anti-Discrimination Policy
  • APM - 035: Affirmative Action and Nondiscrimination in Employment


Job location
Berkeley, CA
Not Specified
Lead Mechanical Systems Engineer - Remote Structures and Integration (AUSTIN)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 4 days ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer - Remote Structures and Piping (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
AUSTIN, Texas, Remote 4 days ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) - Cutting-edge Data Center Projects (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
WASHINGTON, District of Columbia, Remote 1 day ago
Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
jobs by JobLookup
✓ All jobs loaded