Engineering Structures Journal Jobs in Lithopolis Ohio Remote
443 positions found — Page 5
Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.
Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.
Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.
What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.
Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.
Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.
Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
SonderMind is a leading mental health care platform revolutionizing therapy services by empowering licensed mental health therapists to deliver exceptional care with cutting-edge, AI-powered tools. We are seeking compassionate and highly skilled clinicians to join our expanding network, offering the flexibility to manage your own practice, bring your existing clients, and benefit from steady referrals.
At SonderMind, we believe there can’t be mental healthcare without mentally-strong clinicians. Our platform is designed to outsmart burnout and streamline your workflow, allowing you to focus on what matters most—your clients. We are committed to fostering relationship-driven care, providing ethically grounded, human-first tools that enhance outcomes and reduce administrative burdens.
Benefits of Joining SonderMind:
- Flexibility: Enjoy the freedom to set your own working hours and maintain a healthy work-life balance. Sessions can be conducted via telehealth or in-person.
- Free and stress-free credentialing with major insurers: We have streamlined the credentialing process and handle all the hard stuff for you so that you can expand your practice by accepting insurance from major payors in your state in weeks, not months.
- Guaranteed Pay: We handle all the billing for you and guarantee pay bi-weekly for completed sessions-including no-shows.
- Referrals and Practice Support: Seamlessly onboard your existing clients while receiving new referrals. Benefit from thoughtful client matching to personalize your caseload, with support from a dedicated account manager to help you grow your practice across various specialties.
- Absolutely no fees or membership charges: We don’t charge you to deliver care, and all of the features, access, tools, and resources you get come free of charge.
- Innovative AI-Powered Tools: Outsmart burnout and focus on what matters most—your clients. Our secure, clinically-developed AI tools eliminate administrative tasks and keep clients engaged between sessions. This includes:
- AI Notes: Auto-generates editable, insurance-compliant clinical notes, saving you time and reducing documentation burden.
- Session Takeaways: Extend your care between sessions by reviewing and sending client-friendly summaries of key insights.
- Session Prep: Help clients clarify goals and focus areas before each session, ensuring you hit the ground running.
- Goal Setting: Collaborate with clients to set and track goals, increasing engagement and accountability.
- Treatment Plan: Easily align with clients on diagnoses, goals, and care plans in a clear, clinically grounded format.
- Reflections: Clients can journal through AI-guided prompts between sessions, providing you with deeper context.
Requirements:
- Master's degree or higher in counseling, psychology, social work, or a related field.
- Must be fully licensed by the State Board to provide therapy independently and without supervision (e.g., LPC, LCSW, LMFT, LMHC, LCPC, LCSW-C, LISW, or LP).
Pay: $75-$117 per hour. Pay rates are based on the provider license type, session location, and session types.
*Please note that SonderMind does not provide office space; therapists are responsible for securing their own location for in-person sessions, but we can help connect you with other SonderMind therapists looking to share space.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
Mechanical Design Engineering
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
How will you make an impact?
We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.
What will you do?
- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required
Experience:
- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.
About Jabil’s Intelligent Infrastructure Group:
- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems
As part of the total rewards package, this position is eligible for:
- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Digital Content Specialist II (Hybrid)
Chicago, IL
The American Medical Association (AMA) is the nation's largest professional Association of physicians and a non-profit organization. We are a unifying voice and powerful ally for America's physicians, the patients they care for, and the promise of a healthier nation. To be part of the AMA is to be part of our Mission to promote the art and science of medicine and the betterment of public health.
At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.
We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.
We have an opportunity at our corporate offices in Chicago for a Digital Content Specialist II on our Digital Marketing team. This is a hybrid position reporting into our Chicago, IL office, requiring 3 days a week in the office.
As a Digital Content Specialist II, you will support UX copywriting and content
across AMA's digital platforms, with a primary focus on FREIDA, a platform that
helps medical students search for and evaluate residency programs. The role contributes
to the creation of specialty-specific informational content, user-facing copy,
and messaging that helps guide medical students, residents, and physicians
through critical career decisions. Working under established UX and content
standards, this role applies UX writing best practices to improve clarity,
engagement, and usability. The position works closely with product, UX, and
marketing teams to ensure content is consistent, effective, and aligned with
the overall member experience.
RESPONSIBILITIES:
Writing and Content Development
- Write comprehensive Q&A content for individual medical specialties within the FREIDA Specialty Guide
- Develop and maintain informational content across FREIDA resources, including the Residency Guide and student-facing guidance materials
- Develop copy for the Program Director Portal, including guidance, instructions, and resource content
- Create push notifications, alert banners, and promotional messaging to support engagement and highlight key deadlines and seasonal activities
- Collaborate with medical education stakeholders to ensure content accuracy and clinical appropriateness
FREIDA Content
- Create clear, concise, and user-centered copy for FREIDA and AMA digital properties that support the FREIDA experience, including AMAone and related join/renew and sign-in flows
- Write and optimize UX copy for onboarding sequences, navigation, error states, and transactional touchpoints
- Work on landing page and member-facing content that supports usability and conversion goals
- Collaborate with UX designers to integrate copy early in the design process and support effective content-design collaboration
- Conduct content audits and contribute recommendations to improve clarity and usability
User Insight and Industry Awareness
- Develop an understanding of medical student, resident, and physician behaviors to inform content strategy and UX copy decisions
- Apply user insight and evolving UX and healthcare education trends to support product, design, and marketing initiatives
- Refine content based on user feedback, observed behavior, and performance data
May include other responsibilities as assigned
REQUIREMENTS:
- Bachelor's degree in English, Communications, Journalism, Marketing, or a related field required
- Ability to translate complex or regulated information into clear, user-centered language
- Experience collaborating with product, design, and marketing teams through content contributions
- Experience supporting content standards, including voice, tone, and style guidelines
- Comfort presenting recommendations and incorporating stakeholder feedback
- Hands-on experience with enterprise CMS platforms, preferably Drupal, and collaboration tools including JIRA, Confluence, Asana and Figma
- Working knowledge of Google Analytics and Power BI to inform content improvements
The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.
This role is an exempt position, and the salary range for this position is $74,160-$98,318. This is the lowest to highest salary we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration and geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.
We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.
THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION
Apply NowShare Save JobRemote working/work at home options are available for this role.
