Engineering Structures Journal Jobs in Fall River Ma Flexible
440 positions found
FLSA Status: Exempt
Department: Food and Beverage Kitchen
Reports to: Chef De Cuisine & General Manager
Purpose:
The Chef is directly responsible for the cost-effective operation of a clean and safe kitchen while meeting or exceeding food quality and speed of service requirements. The Chef works as part of the management team of the restaurant to build sales and grow the business and is responsible for operating a profitable restaurant, where the quality of food, service and ambience are continually challenged and improved, and where an environment that fosters creativity, free thinking and intelligent decision-making is encouraged.
The Chef is expected to work an average of 5055 hours per week.
Essential Duties:
-Creating and maintaining an upbeat, productive, and educational environment.
- Projecting a positive attitude.
- Showing respect for all employees and actively cultivating an inclusive environment build upon
mutual respect, civility, and positivity.
- Providing ongoing training and constant improvement of product and workplace (i.e., safety,
sanitation and systems).
- Setting the pace and tone of the kitchen and overall restaurant through attitude,
initiative and drive.
- Providing feedback and direction to BOH employees, to continue ongoing development.
-Helping to develop a cohesive team and leading them to work toward the common goals of the
restaurant.
- Possessing a high level of initiative and drive to do whatever is necessary to build and run a
successful operation.
- Working closely with the General manager to create a team atmosphere among the entire staff that is both a positive and professional work environment.
- Leading by example, taking an active role in cooking and supervising the line during dinner service.
- Participate in mini meetings with FOH management on a regular basis to ensure clear line of communication and upkeep of company goals.
- Establishing clear communications along all lines within the business.
Building the Business and Guest Base
- Aggressively working to build food sales by operating the kitchen with a guest-satisfaction mentality.
- Making decisions based on what is best for the guest.
- Solving problems so that each guest will want to return.
-Working with the GM and front of house manager to train staff on product knowledge.
Quality of Operations
-The Chef is responsible for ensuring that the restaurant is operating at or above company standards. The
-Chef must pay attention to detail in all areas of the operation, including food quality and consistency, training
and development, security, safety, sanitation, and physical structure.
Specifically:
- Ensuring strict adherence to standards for food quality.
- Demonstrating commitment to cultivating knowledgeable staff members who are proud of our
quality and believe in our concept.
- Ensuring all Health Department regulations are always enforced.
Cost Management and Profitability
The Chef is responsible for generating strong financial performance for the health of the restaurant and the
company. They are ultimately responsible for ensuring that the food and BOH labor costs meet or exceed
budgeted financial goals.
Specifically:
- Working proactively with the General Manager to maximize sales and optimize profits through the
management of food and labor costs.
- Food COGS goal of 28% or less.
- Total Kitchen Labor goal of 11%
- Analyzing weekly costs to ensure proactive management of controllable costs.
- Assuming full responsibility for:
- Monitoring daily BOH labor reports and minimizing overtime.
- Providing a monthly physical inventory
- Maintaining the valuations on your inventory using invoices from vendor
- Purchasing and Receiving
- Monitoring local vendors accordingly.
- Placing effective orders, based on sales, while simultaneously taking advantage of drop size
incentives.
- Proper receiving, rotation, storage, and handling of all food products.
Production
- Taking a hands-on approach and being directly involved in daily production.
- Setting appropriate prep levels (sales versus usage) to ensure fresh product and effective use of
labor, including:
- Daily prep counts.
- Weekly prep totals and weekly prep plans.
- Regular review of Product Mix (P-Mix) information.
Personnel
The Chef is responsible for overseeing all aspects of kitchen staffing and is responsible for the hiring and
scheduling of quality employees to execute the menu successfully and to maintain the smooth flow of
kitchen operations.
Specifically:
- Establishing and maintaining appropriate staffing levels and remaining abreast of any changes that may
impact staffing needs.
- Keeping the GM informed of all staffing needs.
- Ensuring thorough and complete training of all employees, including kitchen operations, knife
safety, proper handling of product, use of chemicals, use of equipment, etc.
- Minimizing employee turnover.
- Providing coaching, mentoring and development to all employees as this is critical for the
success of the restaurant and the company.
- Mentoring, coaching and developing Sous Chef Donald Readington to be an extension of yourself. Sous
development should include; menu engineering, systems development, training systems, vendor
negotiations and kitchen management.
- Providing consistent and frequent feedback to Sous Chef(s) and staff.
- Teaching and coaching staff daily.
- Holding BOH meetings to review specials, menu items and discuss kitchen issues.
- Attending FOH Pre-Meals to review specials, menu items and discuss kitchen issues.
- Producing an accurate forecast
Administration
- Overseeing the creation and implementation of all menus.
- Ensure all menu changes are rolled out according to The Terrace Rooftop Dining procedures
- Ensuring that performance reviews of all BOH employees are completed annually
Facility and Equipment
The Chef is responsible for the daily upkeep of the physical restaurant/kitchen, specifically:
- Providing a daily walk through of the kitchen to determine areas needing attention or repair.
- Maintaining a running punch list of need to have as well as nice to have items which are
handled in a timely fashion as appropriate.
- Planning necessary upgrades in a timely, well thought out way.
- Calling appropriate repair companies
- Keeping The Terrace Leadership informed of all necessary repairs and logging repairs and
Maintenance.
This job description is not an exclusive or exhaustive list of all job functions that an associate in this position may be asked to perform from time to time.
Compensation details: 75 Yearly Salary
PI152e172c56af-26289-39969973
About the Company
We’re an innovative startup building the next generation of unmanned underwater vessels (UUVs) — autonomous systems designed to explore, protect, and operate beneath the ocean’s surface. Our mission is to push the boundaries of marine technology, and we’re looking for passionate people ready to grow with us.
As we scale production and expand operations, we’re building out our finance function — and that’s where you come in.
About the Role
As our Cost Accounting / Finance Associate, you’ll be a key member of a small, agile finance team focused on building robust cost systems and financial processes from the ground up. You’ll analyze production costs, partner with engineering and operations teams, and help us make smarter, data-driven decisions as we scale our manufacturing of cutting-edge marine systems.
This is a great opportunity for someone with a strong accounting foundation who wants to have real impact, learn fast, and grow with an emerging tech company.
What You’ll Do
- Build and maintain cost tracking systems for materials, labor, and overhead across UUV production and R&D programs.
- Analyze manufacturing variances, identify cost drivers, and recommend efficiency improvements.
- Partner with operations, supply chain, and engineering to ensure accurate cost allocation and reporting.
- Support month-end close, accounting, reconciliations, and cost-of-goods-sold (COGS) reporting.
- Assist with inventory valuation, BOM accuracy, Routings and cost roll-ups.
- Contribute to financial models for pricing, proposals, and project forecasting.
- Help design and implement scalable financial processes and ERP tools as the company grows.
- Ensure compliance with internal controls and support audit preparation.
- Support processes related to DCAA compliance and government contracting as the company expands into defense programs.
What You Bring
- Education: Bachelor’s degree in Accounting, Finance, or related field, Master or MBA preferred.
- Experience: 3–5 years in cost accounting, finance or FP&A roles (preferably in a manufacturing, engineering, or hardware startup environment).
- Preferred: CPA certification (or working toward it) and familiarity with DCAA compliance including FAR/CAS rules a plus.
Technical Skills:
- Strong knowledge of cost accounting principles and GAAP.
- Advanced Excel / Google Sheets skills (pivot tables, lookups, data modeling).
- Experience with ERP systems (NetSuite, SAP, Microsoft Dynamics or similar).
- Strong understanding of manufacturing processes, BOMs, Routings and inventory control.
Soft Skills:
- Entrepreneurial mindset and eagerness to build from the ground up.
- Analytical, detail-oriented, and comfortable in a fast-moving environment.
- Excellent communication and collaboration skills across technical and non-technical teams.
Why Join Us
- Be part of a pioneering team in autonomous marine technology.
- Help shape the finance and cost accounting systems for a growing startup.
- Career growth opportunities as we scale — potential to move into senior finance or operations roles.
- A mission-driven, innovative culture that values initiative, curiosity, and collaboration.
Compensation package
Compensation: Base, equity, bonus, employee benefits, 401k, Unlimited PTO
Equal Opportunity Statement
Vatn is an equal opportunity employer, and we welcome candidates from all backgrounds to apply. We look forward to reviewing your application and potentially having you join our team in shaping the future of autonomous underwater exploration.
SonderMind is a leading mental health care platform revolutionizing therapy services by empowering licensed mental health therapists to deliver exceptional care with cutting-edge, AI-powered tools. We are seeking compassionate and highly skilled clinicians to join our expanding network, offering the flexibility to manage your own practice, bring your existing clients, and benefit from steady referrals.
At SonderMind, we believe there can’t be mental healthcare without mentally-strong clinicians. Our platform is designed to outsmart burnout and streamline your workflow, allowing you to focus on what matters most—your clients. We are committed to fostering relationship-driven care, providing ethically grounded, human-first tools that enhance outcomes and reduce administrative burdens.
Benefits of Joining SonderMind:
- Flexibility: Enjoy the freedom to set your own working hours and maintain a healthy work-life balance. Sessions can be conducted via telehealth or in-person.
- Free and stress-free credentialing with major insurers: We have streamlined the credentialing process and handle all the hard stuff for you so that you can expand your practice by accepting insurance from major payors in your state in weeks, not months.
- Guaranteed Pay: We handle all the billing for you and guarantee pay bi-weekly for completed sessions-including no-shows.
- Referrals and Practice Support: Seamlessly onboard your existing clients while receiving new referrals. Benefit from thoughtful client matching to personalize your caseload, with support from a dedicated account manager to help you grow your practice across various specialties.
- Absolutely no fees or membership charges: We don’t charge you to deliver care, and all of the features, access, tools, and resources you get come free of charge.
- Innovative AI-Powered Tools: Outsmart burnout and focus on what matters most—your clients. Our secure, clinically-developed AI tools eliminate administrative tasks and keep clients engaged between sessions. This includes:
- AI Notes: Auto-generates editable, insurance-compliant clinical notes, saving you time and reducing documentation burden.
- Session Takeaways: Extend your care between sessions by reviewing and sending client-friendly summaries of key insights.
- Session Prep: Help clients clarify goals and focus areas before each session, ensuring you hit the ground running.
- Goal Setting: Collaborate with clients to set and track goals, increasing engagement and accountability.
- Treatment Plan: Easily align with clients on diagnoses, goals, and care plans in a clear, clinically grounded format.
- Reflections: Clients can journal through AI-guided prompts between sessions, providing you with deeper context.
Requirements:
- Master's degree or higher in counseling, psychology, social work, or a related field.
- Must be fully licensed by the State Board to provide therapy independently and without supervision (e.g., LPC, LCSW, LMFT, LMHC, LCPC, LCSW-C, LISW, or LP).
Pay: $111-$158 per hour. Pay rates are based on the provider license type, session location, and session types.
*Please note that SonderMind does not provide office space; therapists are responsible for securing their own location for in-person sessions, but we can help connect you with other SonderMind therapists looking to share space.
Join an established and growing heart failure service at a 328-bed hospital that provides a broad range of cardiovascular care to a growing population, including Cardiothoracic Surgery, EP, etc.The Heart Failure clinician will work with cardiothoracic surgical and other colleagues to manage the growth of MCS services and work with advanced providers to support the development of a comprehensive Heart Failure evaluation and management program Practice Details Non-profit health system serving more than 700,000 people Services include cardiac care, brain/spine, Robotic and bariatric surgery, and a new center for cancer care Strong reputation for quality, community commitment, and financial stability Hospital administration is fully supportive of the growth of a superb Heart Failure program to serve the region The position will be supported in a partnership with the Advanced Heart Failure Program at Tufts Medical Center The Heart Failure clinician will be a full participant in activities of the Tufts Heart Failure Team, including up to 4 weeks of attending the in-patient LVAD/transplant/advanced heart failure service on-site at Tufts, potential participation in out-patient clinics, participation in all of the LVAD/transplant evaluation meetings and presenting local cases to the team following full local evaluation The Cardiovascular Care Center provides tertiary level care in a community hospital setting that includes a high-volume catheterization and interventional program, advanced electrophysiology, structural heart including TAVR, mitral clip and watchman,high-volume cardiac surgery, and advanced vascular surgery Busiest STEMI Center in the Southeastern Massachusetts region Offering advanced non-invasive testing including TEE (supports structural program), echo, nuclear, cardiac CTA, and Cardiac MRI Compensation/Benefits Leading salary with productivity-based incentives, relocation assistance, signing bonus, and retention bonus Excellent benefits package including 41 days PTO and 6% match on retirement after 2 years Malpractice coverage of $2M / $6M Community/Location Located 20 miles from Providence and one hour from Boston The scenic beaches of Cape Cod are within one hour Multi-cultural community with a vibrant waterfront, ethnic restaurants, and cultural events City population of 90,000 people JV-2
Practice Details High volume Cardiac Surgery program.
Advanced Interventional, Structural Heart and EP program TEE with advanced structural heart support training.
CTA and Cardiac MRI training optional Call is 1:6 weekends Leading compensation Signing bonus, relocation assistance and productivity incentives Community/Location Culturally diverse coastal community located 60 minutes from Boston and 30 minutes to Providence This area offers a variety of public and private schools, family oriented communities, cultural events and parks and beaches JV-1
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
