Engineering Structures Impact Factor Jobs in Yorkshire Virginia

The Company

VINCI Construction Grands Projets USA (formally VINCI Construction LLC) is a subsidiary of VINCI Construction Grands Projets with its main office located in Alexandria, Virginia. The scope of the company is general contracting and construction work, along with any associated services related to large, selected Design and Build projects, either public or private for which it can bring clear and strong added value. We aim to develop engineering and construction services for large infrastructure projects in various parts in the United States and provide a highly skilled and competitive professional service in construction field.

Project Overview:

As part of the Hampton Roads Connector Partners (HRCP) Joint Venture (JV) consisting of VINCI Construction, Dragados, and Flatiron has been selected to construct the $3.3BN Design Build project – the largest civil construction contract ever awarded by the Virginia Department of Transportation (VDOT).

The project scope across a 9-mile section of the I-64 will include: a new 3.5-mile bridge-tunnel crossing that will accommodate a total of 8 lanes of capacity across the water, replacement of the existing marine approach bridges and the addition of a third lane on I-64 in each direction. The twin 45’ diameter 1.5-mile tunnels will be bored by TBM, creating the second largest TBM tunnel opening for a TBM in North America. The project is expected to continue to the beginning of 2027.

Responsibilities:

As the Tunnel Interior Structure Construction Manager for the $3.3BN Hampton Roads Bridge Tunnel Expansion Project (HRBT) in Virginia, you will lead and carry out construction processes in accordance with the direction, policies, and objectives set by the Tunnel Construction Manager.

The primary responsibility of this position is to lead Superintendents in construction activities on the site – including planning, preparation, and execution. Secondary duties of this position are to assist the Tunnel Construction Manager in the completion of all construction activities of the affiliate.

• Planning Workload.
• Organizing the progress of multiple employees
• Delegating work to team members.
• Identifying potential schedule conflicts and generating and implementing needed modifications.
• Monitoring team performance and carrying out appraisals.
• Ensuring work is completed on time, to a high standard, and in line with Health and Safety guidelines.
• Prepare Budget and cost estimates, along with work timetables.
• Adept at establishing relationships with all parties involved in the construction process that facilitate harmonious working relationships during the project, and permit prompt resolution of problems and conflicts as they occur.
• Identify, mitigate, and track recurring construction issues.
• Conduct and document quality assurance and safety inspections throughout the construction process, ensuring that the work environment is acceptable and that tools and equipment are in good working condition.

Qualifications and Skills:

Required:

• Knowledge of materials, methods, and the tools involved in the construction, repair, and maintenance of machinery and tools.
• Extensive experience in Road works in a tunnel
• Extensive experience in Tunnel structure construction
• Ability to solve complex problems.
• Must be able to interpret drawings and written instructions.
• Knowledge of company safety policies and procedures to comply with company, local, state, and/or federal laws.
• Proven knowledge in determining the kind of tools and equipment needed to do a job.
• Communicate effectively with coworkers, supervisors, and engineers.
• Experience or skill in managing time in order to complete tasks.
• Technical skills to interpret construction methods, contracts, and drawings.
• Communication skills
• Proficiency with Microsoft 365 (Outlook, Excel, Word, Teams, SharePoint)

Work Environment:

• Involves a dynamic and challenging work environment.
• Work in environmental extremes of heat and cold, dependent upon job location
• Fast-paced environment that may require long hours, including nights and weekends
• Required to wear personal protective equipment (PPE) such as hard hats, safety glasses, and reflective vests when on-site

Physical Demands:

• Must be able to lift 25lbs
• Occasional bending, stooping, twisting, crawling, kneeling.
• Occasional climbing of ladders
• Frequent work in dusty environments
• Frequent work in areas of excessive noise
• Work variable hours, including overtime hours as needed.

VINCI Construction Grands Projets USA offers all full-time employees competitive wages and benefits, including:

• Medical, Dental & Vision Insurance
• Health Reimbursement Account (HRA)
• Vacation Leave
• Sick Leave
• Paid Holidays
• Company 401(k) Matching Contributions
• Employee Assistance Program (EAP)
• Commuter Benefits Program
• Parental Leave
• Term Life & AD&D Insurance
• Short & Long-Term Disability Insurance
• Employee Stock Ownership Plan (ESOP)
• Professional Development & Training
• Health and Wellness Spending Account

VCGP USA is an Equal Opportunity Employer, Disability/ Veteran. Please click on the attached link to see a digital copy of the Federal, State, and Federal Contractor Posters

Water/Wastewater Engineer – Project Manager – Treatment

– Virginia Beach, Virginia, United States

Our client is a global, full-service infrastructure consulting and engineering firm with a strong, nationally recognized Water/Wastewater practice. They deliver complex treatment, conveyance, and pumping solutions for municipal and utility clients across Virginia and the broader region. If you are a senior water/wastewater engineer who enjoys leading multidisciplinary teams and owning projects from concept through construction, this is a fantastic role for you

Key Responsibilities

• Project Management – Treatment Focus: Lead planning, design, and delivery of water and wastewater treatment plant projects and related facilities (including pumping stations and associated collection/distribution infrastructure) for municipal and utility clients.
• Scope, Schedule & Budget: Manage multiple concurrent projects, taking ownership of scope definition, scheduling, budgeting, resource planning, change management, and contract closeout.
• Technical Leadership: Provide technical direction and QA/QC for treatment process design, pumping facilities, and associated civil/mechanical components; review calculations, plans, and specifications prepared by project teams.
• Client Interface: Serve as a primary point of contact for key clients in the Hampton Roads region; lead progress meetings, present technical findings, and build long-term client relationships.
• Team Mentorship: Mentor and guide junior and mid-level engineers, supporting their technical growth and helping to develop the next generation of project leaders.
• Cross-Discipline Coordination: Collaborate with other internal disciplines (civil, structural, electrical, controls, construction management) and external stakeholders to resolve design and interface issues.
• Business Development: Support and lead pursuits, including identifying opportunities, helping shape win strategies, preparing proposals and fee estimates, and participating in interviews and presentations.

Required Qualifications

• Bachelor’s degree in Civil, Environmental, Mechanical Engineering, or closely related discipline from an accredited program.
• 8+ years of progressive experience in water/wastewater engineering, with significant focus on treatment plant design and project delivery.
• Active Professional Engineer (PE) license.
• Demonstrated experience managing water/wastewater projects from planning through design and into construction, including responsibility for schedule and budget.
• Strong technical skills in water/wastewater treatment processes, pumping facilities, and collection/distribution systems.
• Excellent verbal and written communication skills, including the ability to lead client meetings and prepare clear technical reports and presentations.

Preferred Experience

• 10–15 years of experience in municipal water/wastewater consulting, with an emphasis on treatment plant projects.
• Direct experience working with Hampton Roads and Virginia municipal/utility clients and familiarity with regional permitting and regulatory requirements.
• Prior responsibility for project financial performance, staff management/mentorship, and pursuit strategy on key water/wastewater projects.
• Involvement in professional organizations such as WEF and AWWA.

Why This Role?

• Impactful Work: Lead critical water and wastewater treatment projects that support resilient, sustainable communities in the Hampton Roads region.
• Leadership Opportunity: Step into a highly visible PM role with room to shape project teams, client relationships, and future pursuits.
• Competitive Compensation & Benefits: Strong salary range, bonus potential, and a comprehensive benefits package through our client.
• Professional Growth: Join a top-tier Water/Wastewater practice with clear advancement paths and support for professional development, licensure, and industry involvement.

Location

Role will be based out of their Virginia Beach, VA office.

Candidates should currently reside in, or be willing to relocate to, the Hampton Roads area.

• 
  
• Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.
  
• Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.
  
• Fabricate and install fixtures and jigs required for welding process alignments.
  
• Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.
  
• Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.
  
• Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.
  
• Leads technical project teams, schedules, reports and briefs customers and senior management.
  
• Performs duties outside of specialty in order to complete installation or work assignment.
  
• Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.
  
• Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.
  

• 
  
• Must possess a high school, trade or vocational school degree
  
• 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment
  
• Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred
  
• Must have or have the ability to obtain a SECRET clearance
  
• Must have the ability to obtain base access and security credentials
  
• Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs
  
• Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces
  
• Travel may be required within and outside of the continental United States
  
• Due to export control regulations, this role is open to U.S. citizens of the US
  
• Demonstrated reliability and punctuality; must be able to consistently report to work on time
  
• Possess basic and some advanced specialized welder's tools
  

S. B. Ballard Construction Company, a leading General Contractor/Construction Manager servicing the Mid-Atlantic region, headquartered in Virginia Beach, VA is seeking a well-organized Quality Control Manager to join our team for projects located within the Hampton Roads area. This position will lead all the on-site activities required throughout the construction process to successfully deliver a project on time and within budget. This CQM role requires working on an active Military Installation and requires working on-site. You must be able to get base access approval.

Essential Duties and Responsibilities

• The QC Manager shall be responsible for the overall management of the CQC system.
• Schedule and coordinate all sampling, testing, and inspection of work.
• Maintain complete and current records of material and equipment submittals.
• Perform the Three Phases of Control to assure conformance of materials, installation and workmanship with the Contract documents.
• Gather, coordinate and prepare to submit final project closeout documents including but not be limited to: Operation and Maintenance (O&M) manuals, Installed Property data, Transfer Property data, User Training records, Final Test Log and Final Test Reports, Final Inspection Reports, Final Submittal Register, Warranties, Warranty Tags, Warranty Management Plan, and other closeout data/documents listed in the specifications
• Prepare, submit and file daily CQC reports with supporting attachments
• Inspect the work in progress on a daily basis.
• Coordinate identification and correction of work deficiency (rework) items.
• Schedule, supervise and coordinate CQC Specialists in the areas of civil, architectural, structural, plumbing, mechanical, electrical and environmental work - gathering inspection reports for submission and file
• Prepare punch list for buildings prior to turn over. QC Manager shall also verify that all items on punch list have been corrected prior to customer pre-final inspection. QC Manager shall be present during Final acceptance inspection.

Qualification Requirements

• To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required.

Education:

• Graduate of Engineering, Architecture or Construction Management Preferred or equivalent experience.
• Certification: Current certificate for Construction Quality Management (CQM) For Contractors
• Safety: OSHA 30, EM-385 40 Hour, First Aid, CPR

Experience

• A minimum of 5 years Quality Control experience, 10 years preferable
• LEED Green Associate or LEED AP - preferred
• Experience as a Quality Control Manager on NAVFAC or USACE managed projects
• Experience in the use of NAVFAC - WORD, EXCEL and pdf Templates
• Experience in the use of USACE - QCS module of the Resident Management System (RMS)
• Experience in writing meeting agendas, conducting QC Meetings and writing meeting reports
• Experience in office QC Administration (processing submittals, maintaining register, test log, three phase log, preparing Prep & Initial Worksheets, gathering closeout documentation and making required entries into computer templates / spreadsheets / data bases/ e-folders)
• Experience organizing, managing and filing QC Department paper documentation
• Experience in QC field inspection, inspection documentation and photographic recording
• Experience managing deficiencies and following up on DOR/EOR Field Reports and Directives

Search is currently focusing on eligible candidates residing within the Hampton Roads area.

The summary of essential duties and responsibilities listed above is not intended to cover all possible job duties and is subject to change at our discretion. The salary for this position is based on experience as well as a variety of other factors negotiated during the offer process. We are a drug free workplace and all applicants considered for employment must pass a post-offer drug screen and background check prior to commencing employment. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Apply today and check out our portfolio of projects at further information.

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Work Location: In person

The SharePoint Analyst Lead analyzes user needs to determine functional and cross-functional requirements. Identifies resources required for each task. The SharePoint Analyst Lead is responsible for leading the functional and analytical aspects of the SharePoint Online (SPO) environment within the DOD365-J tenant. This role bridges the gap between business users, mission partners, and technical teams by analyzing user requirements, optimizing collaboration solutions, and ensuring operational continuity across SharePoint and integrated Microsoft platforms such as Power Automate, Power Apps, Power BI, and Dataverse. The SharePoint Analyst Lead supports modernization and migration efforts away from deprecated SharePoint features, provides Tier 2 and Tier 3 operational support, and ensures functional solutions comply with DISA and DoD policies. The position involves direct engagement with customers, developing and maintaining workflows, lists, and libraries, and driving user adoption of secure and efficient modern collaboration tools. This position plays a critical role in maintaining system performance, ensuring compliance with Service Level Agreements (SLAs), and providing actionable insights to leadership regarding system health, functional issues, and end-user experience.

This is an onsite position located within the National Capital Region. Individuals must reside within a commutable distance in order to work onsite full time.

Responsibilities Include:

• 
  
• Analyze user and mission partner requirements to determine functional and cross-functional SharePoint needs.
  
• Translate business requirements into functional site designs, workflows, and list/library structures within the modern SharePoint Online environment.
  
• Support the migration from deprecated SharePoint features (e.g., InfoPath, Classic Workflows, custom scripting) to modern SPO alternatives such as SPFx and the Power Platform (Power Automate, Power Apps, Power BI, Power Pages).
  
• Identify opportunities to leverage Microsoft's low-code/no-code tools to replace legacy processes and reduce reliance on custom applications.
  
• Document functional requirements, process flows, and configuration details to support governance, sustainment, and knowledge transfer.
  
• Ensure staffing aligns with customer requirements and that qualified personnel with appropriate clearances are assigned.
  
• Foster a culture of accountability, collaboration, and continuous improvement within the program team.
  
• Lead Tier 2 and Tier 3 functional support for SharePoint and Dynamics CRM service requests, incidents, and user inquiries (averaging ~90 tickets per month).
  
• Execute out-of-the-box customizations and configuration changes to support user needs, business intelligence dashboards, and workflow automation.
  
• Categorize service requests as Tier 2 support, new project work, or escalation candidates, and route accordingly.
  
• Manage ticket queue and ensure all tickets are assigned, acknowledged, and updated in compliance with SLAs.
  
• Communicate status updates to customers weekly (service requests) or every two business days (incidents) until closure.
  
• Resolve tickets within SLA timeframes and document all resolutions and lessons learned for inclusion in the knowledge base.
  
• Coordinate with the DISA J6 Tier I Service Desk, DEOS support teams, and higher-tier engineers when technical escalation is required.
  
• Maintain and update the list of all SharePoint site owners and points of contact (POCs) to ensure proper permissions management and accountability.
  
• Support performance monitoring of the SPO environment and assist in tracking metrics related to system availability, uptime, and user satisfaction.
  
• Participate in performance improvement initiatives, identifying functional or configuration-related bottlenecks and recommending corrective actions.
  
• Contribute to weekly and monthly reports with updates on service tickets, incidents, SLAs, and functional health metrics.
  
• Remediate functional-level IAVA findings in collaboration with security and architectural teams (e.g., addressing deprecated workflows or permissions risks).
  
• Collaborate with monitoring and operations teams to interpret system alerts related to SharePoint availability and proactively prevent downtime.
  
• Participate in meetings and reviews related to system performance, modernization initiatives, and process optimization.
  
• Promote adoption of modern SharePoint features, encouraging secure and efficient collaboration practices across the organization.
  
• Document and share best practices, standard operating procedures (SOPs), and configuration guides to support consistency and compliance.
  
• Act as the primary functional liaison between the business users, technical engineering teams, and governance stakeholders.
  

Required Skills, Qualifications and Experience:

• 
  
• Education/Experience: BA/BS in a technical or managerial discipline.
  
• Citizenship and Clearance:
  
  • 
    
  • US Citizenship is required.
    
  • Must have and maintain a current DoD Secret clearance.
    
  
  
  
• Experience: 5+ years of progressive experience in SharePoint functional analysis, administration, or solution delivery (with at least 2 years in SharePoint Online or DOD365-J environment).
  
• Demonstrated experience supporting end-users and mission partners with SharePoint configuration, Power Platform tools, and workflow development.
  
• Experience working in or supporting DoD environments preferred.
  
• Proficiency in designing and maintaining SharePoint lists, libraries, permissions, workflows, and site templates.
  

Preferred Qualifications:

• 
  
• ITIL Foundation or equivalent process management certification desirable.
  
• IAM III certification preferred: CASP+, CISSP, CISM, or other 8140 IAM certification.
  

Compensation: $110,000 - $130,000

This position is part of a pipeline for a future opportunity supporting a DoD customer. Employment is contingent upon contract award and government customer approval. AGE Solutions is actively engaging talent ahead of award and encourages both current incumbents and new candidates to express interest.

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

The Senior SharePoint Architect serves as the lead technical authority responsible for the planning, architecture, engineering, and modernization of DISA J6's SharePoint and Dynamics CRM platforms. This role supports both Platform Services and Operations and Maintenance Service Delivery, ensuring solutions are secure, scalable, and aligned to DISA's enterprise technology roadmap and cloud transition goals. The Sr. SharePoint Architect designs architecture to include the software, hardware, and communications to support the total requirements as well as provide for present and future cross-functional requirements and interfaces. Identifies, assesses, and presents options for meeting the functional and technical requirements including hardware and software updates or upgrades. Responsible for developing high level system design diagrams. Ensures these systems are compatible and in compliance with the standards for open systems architectures, the Open Systems Interconnection (OSI) and International Standards Organization (ISO) reference models, and profiles of standards - such as Institute of Electrical and Electronic Engineers (IEEE) Open Systems Environment (OSE) reference model - as they apply to the implementation and specification of Information Management (IM) solution of the application platform, across the application program interface (API), and the external environment/software application. Ensures that the common operating environment is compliant. Evaluates analytically and systematically problems of workflows, organization and planning and develops appropriate corrective action.

This is an onsite position located within the National Capital Region. Individuals must reside within a commutable distance in order to work onsite full time.

Responsibilities Include:

Architecture, Design, and Integration

• 
  
• Design, maintain, and evolve SharePoint and CRM architectures for both on-prem and cloud environments (DOD365-J).
  
• Develop and manage technical roadmaps aligned with J6's enterprise architecture.
  
• Serve as the lead integrator for enterprise-level planning, stability, and infrastructure design.
  
• Recommend, evaluate, and implement tools and technologies for system performance optimization.
  
• Lead migration planning for SharePoint and Dynamics CRM modernization into O365 environments.
  

Engineering and Operations

• 
  
• Provide Tier 3/4 engineering and Tier 2/3 operational support for SPO and Dynamics CRM.
  
• Maintain versioning, backups, and high availability of mission-critical systems.
  
• Design and maintain automated deployment pipelines across NIPR and SIPR environments.
  
• Coordinate and perform system monitoring, patching, and capacity management.
  
• Support certification and accreditation (C&A) and ATO processes through RMF compliance.
  

Technical Leadership and Innovation

• 
  
• Lead modernization from deprecated SharePoint features (InfoPath, classic workflows) to Power Platform-based solutions.
  
• Support Power Platform (Power Apps, Power Automate, Power BI, Power Pages) and Dataverse integrations.
  
• Provide expertise for integration testing, performance monitoring, and system resiliency.
  
• Produce architecture documentation, design diagrams, and governance records.
  
• Conduct demonstrations and training for government staff and administrators.
  

Required Skills, Qualifications and Experience:

• 
  
• Education/Experience: BA/BS in Information Systems, Computer Science, or related technical field.
  
• Citizenship and Clearance:
  
  • 
    
  • US Citizenship is required.
    
  • Must have and maintain a current DoD Secret clearance.
    
  
  
  
• Experience: Minimum 10 years of experience in SharePoint and Microsoft technology architecture, development, and operations within DoD or enterprise environments.
  
• Ability to manage competing priorities in a fast-paced, mission-critical environment.
  
• Supervise and mentor technical teams across SharePoint, CRM, and cloud migration efforts.
  
• Coordinate collaboration between architecture, engineering, and operations staff.
  

Preferred Qualifications:

• 
  
• Microsoft Certified: SharePoint Administrator (MS-301), Microsoft Certified: Power Platform Solution Architect Expert, Microsoft Certified: Azure Solutions Architect Expert (AZ-305), or other relevant SharePoint Architect certification
  
• IAM III certification preferred: CASP+, CISSP, CISM, or other 8140 IAM certification.
  

Compensation: $130,000 - $165,000

This position is part of a pipeline for a future opportunity supporting a DoD customer. Employment is contingent upon contract award and government customer approval. AGE Solutions is actively engaging talent ahead of award and encourages both current incumbents and new candidates to express interest.

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

• 
  
• Review and run CNC programs (lathe and mill) using G-code and CAM platforms.
  
• Set up CNC and manual machines using written instructions.
  

• 
  
• Perform the setup and basic operation of equipment, including lathes, mills, grinders, saws, and/or related shop machinery.
  
• Perform machining operations under supervision, using CNC and/or manual equipment as required.
  

• Read and interpret basic blueprints, drawings, manuals, GD&T callouts, and technical work documents.

• Accurately record measurements using metrology tools.

• Understand and follow all company, OSHA, and NAVSEA safety and cleanliness requirements.

• 
  
• High School Diploma/GED.
  
• Ability to perform basic machine operation, tool use, and measurements.
  
• Ability to read and interpret simple blueprints and drawings, and identify basic GD&T.
  
• Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.).
  
• Ability to use basic PMI, with assistance.
  
• Ability to follow setup instructions and run programs on one machine type.
  
• Must be a U.S. citizen who is not a dual citizen of any other country.
  

• 
  
• Experience machining submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment.
  
• Introductory knowledge of CNC machine operation or programming (G-code familiarity a plus, but not required).
  

• 
  
• Demonstrates attention to detail.
  
• Strong communication skills with a collaborative mindset.
  
• Prioritizes safety and maintaining a clean and organized work area.
  

• 
  
• Primarily indoors during the day and occasionally at night.
  
• May require working on or near moving equipment and vibrating equipment.
  
• May be exposed to intense light from welding operations.
  
• Occasional exposure to open fire/flames/sparks from welding and grinding operations.
  
• Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures.
  
• Includes exposure to sounds and noise levels that may exceed 85 decibels and require the use of hearing protection.
  

• 
  
• Lift 20-50 pounds.
  
• Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.
  
• Identify color differences.
  

• 
  
• Lift 10-25 pounds.
  
• Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.
  
• Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.
  
• Operate a motor vehicle.
  

• 
  
• Lift up to 10 pounds.
  
• Wear PPE protection as required for the conditions.
  
• Be able to recognize and react to alarms.
  

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

• Strong compensation & benefits, great culture

• Develop conceptual and detailed landscape design plans for residential, commercial, and mixed-use projects.
• Prepare planting designs, hardscape layouts, grading concepts, and sustainable stormwater solutions.
• Collaborate with civil engineers, surveyors, and planners to ensure seamless project integration.
• Coordinate with local review agencies to meet zoning, ordinance, and regulatory requirements.
• Produce construction documents, specifications, and illustrative graphics for client and agency approvals.
• Conduct site visits for analysis, construction observation, and quality control.
• Participate in value engineering reviews to ensure cost-effective design solutions.
• Communicate design intent clearly to clients, stakeholders, and contractors.

• Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions and examining functionality.
• Responsible for audits, surveillances and inspections while also working closely with our QA department to ensure integration.
• Reviewing blueprints and specifications to compare to produced goods.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Training the production team on quality control measures to improve product excellence.
• Proposing improvements to the production process.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Updating job knowledge by engaging in educational opportunities and regular training.
• Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs.
• Reading and interpreting engineering drawings and radiographs.
• Using gauges such as calipers and micrometers to measure products.
• Collecting and compiling statistical quality data.
• Assisting in the development of test methods and inspection plans.
• Determining the causes of product defects and reworks.
• Verifying all equipment is calibrated correctly.
• Additional duties as necessary.
  

• Must have at least 5 years' experience in the Quality Assurance/Control field and technical or vocational training.
• Must have a strong understanding of Government Specs.
• Must have extensive knowledge of AWS D1.1 (Structural Steel), D1.2 (Aluminum), D1.5 (Bridge Code), and D1.6 (Stainless Steel).
• Must have knowledge of NAVSEA Standards, QA. & OSHA Standards 29 CFR 1920 (Occupational Safety and Health Standards) & 1915 (Personal Protective Equipment for Shipyard Employment).
• Must have ABS code construction experience.
• Knowledge of NAVSEA Standard Items and Quality Assurance requirements
• Must have a valid Driver's license and a clean DMV record.
• Must have expert knowledge of NAVSEA 009 Standard Items.
  

• Minimal Travel; 10% or less.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
  

• Ensure work is done safely and meets quality standards.
• Must have own basic skill related tools and equipment if not supplied by the workplace.
• Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames.
• Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools.
• Locate and mark reference lines, such as center, buttock, and frame lines.
• Position parts in hull of ship.
• Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
• Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding.
• Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
• May prepare molds and templates for fabrication of nonstandard parts.
• May tack weld clips and brackets in place prior to permanent welding.
• May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines.
• Ensure work is done safely and meets quality standards.
• Assemble items as instructed by floor supervisor.
• Keep work areas clean and organized and take proper care of all equipment and facilities.
• Follow all company rules and policies.
• Provide a great level of attention to detail and focus on the given task.
• Work with team members to maximize productivity and efficiency.
• Prepare product for shipment.
• Report any unsafe work conditions or practice to supervisor.
• Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
  

• None
  

• Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
• Familiarity with the metric system
• Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
• Ability to stand continuously for long periods of time.
• Ability to identify and measure material.
• Ability to follow instructions given both verbally and in written form.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic.
• Knowledge of machines and tools, including their designs and uses.
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
  

• High school graduate, or GED preferred.
• Six months to one-year related experience and/or training
• Experience with steel, aluminum and/or stainless steel required.
  

• Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime.
• Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions.
• Work over extended periods of time in tightly configured confined spaces.
• Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
  

• Measuring tapes, rulers, squares, levels, chalk lines, saws, shears, plasma cutters, oxy-fuel torches, angle grinders, welding machines, welding torches, electrodes, welding masks, cranes, hoists, chains, slings, come-alongs, hammers, screwdrivers, wrenches, pliers, vise grips, clamps, files, deburring tools, drills, grinders, sanders, impact wrenches, reciprocating saws, air hammers (pneumatic), riveters (pneumatic), forklifts, pallet jacks, trolleys, and other tools. Items listed are a representative sample but not an all-inclusive list.
  

• May be made to enable qualified individuals with disabilities to perform essential job functions.
  

• 
  
• Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:
  
• the Shipboard installation and integration of complex audio visual display
  
• various communication and electronic warfare systems
  
• related ancillary and computer based systems onboard naval ships and command centers worldwide.
  
• Other Duties as assigned.
  

• We expect this employee to have experience in and be familiar with work being performed in or around industrial environments such as shipyards and Naval/Coast Guard bases and piers. As well as various and subcontractor Government sites.

• 
  
• Must be a U.S. citizen.
  
• Must have or be able to obtain a Secret clearance.
  
• Must have High School diploma.
  
• Must be willing to travel up to 75% CONUS/OCONUS.
  
• Must be willing to work extended hours including weekends and holidays.
  
• Must have a valid driver's license and reliable transportation.
  
• Must have experience in welding steel and aluminum.
  
• Must have experience welding in a shipyard environment.
  
• Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs
  
• Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.
  
• Must be able to successfully pass a pre-employment background check and pre-hire drug test.
  

• 
  
• Experience brazing copper nickel pipe and Oxy Fuel torch operation.
  
• CPR and first aid training experience.
  
• Confined space training.
  
• Climber safety training.
  

• 
  
• This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.
  
• Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.
  
• Work may also be performed outside even during in climate weather.
  
• Work may be performed at heights (aloft) where fall protection is required.
  
• Work may be performed welding and cutting of metal.
  
• Work may be performed off a ladder.
  

• 
  
• Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.
  
• Work at heights (aloft).
  
• Operate power tools safely.
  
• Carry equipment and machinery around ships.
  
• Ability to stand and walk most of the shift.
  
• Kneel and crawl at work site.
  
• Crouch through void openings.
  
• Safely evacuate ship during an emergency.
  

Journeys is a teen retail leader with an emphasis on footwear and unique specialty items including apparel, backpacks, hats and accessories. With more than 800 stores in all 50 US states, Puerto Rico and Canada, Journeys offers the most popular brands that cater to the teen lifestyle such as Converse, Vans, Dr Martens, UGG, Adidas, Timberland, Birkenstock, Crocs and Hey Dude. Through strategic artistic partnerships, event sponsorships, exclusive content, creative collaborations with musicians, and a focus on giving back to the community through charitable events and volunteer programs Journeys has become more than just a retailer, but a universal part of teen and youth culture. The in-store Journeys experience features an energetic environment, friendly, passionate staff, and an inclusive atmosphere where self-expression is not just accepted but encouraged and embraced. Journeys is an attitude you can wear.

Journeys is always looking for great people to join our team!

To assist store management with basic store operations, developing associates, and achieving store and personal sales goals and standards of performance.

Meet and exceed store and personal sales goals and standards of performance

Assist in training and developing a successful sales team

Provide feedback, coaching, and accountability to all employees by enforcing all company policies and practices

Perform all opening and closing duties according to company policy

Supervise and manage all aspects of daily store operations in store management's absence

Supervise and manage all aspects of Loss Prevention practices in store management's absence

Effectively communicate all store needs to store management

Complete bank deposits

Complete all assigned tasks and responsibilities promptly

Complete all required training

Provide a fun, full service experience to all customers

Resolve customer issues effectively

Understand the Journeys culture and demonstrate it to the team

Prior retail sales experience preferred

Ability to multi-task in a fast-paced environment

Excellent interpersonal and customer service skills

Desire to succeed in fast-paced retail environment

Willingness to learn

Completion of all training programs leading up to Sales Lead position or equivalent training

Ability to work night and weekend shifts

Ability to climb, reach, bend, and lift up to 50 pounds

Stand for long periods of time

Must be at least 18 years of age*

*Age requirements for part-time employment may vary based on state

Check out the following website for more information on all our awesome benefits: *The pay rate, commission, and bonus structure varies per job title, county, city, state or province. Benefits offered may include medical, vision, and dental insurance, a vacation package, and community service hours but may also vary by state, province, or territory. For clarification, refer to

Equal employment opportunity is provided to all employees and applicants for employment without regard to race, color, sex, religion, national origin, age, veteran status, pregnancy, childbirth, or related medical condition, physical or mental disability of otherwise qualified individuals, medical condition, genetic information, sexual orientation, citizenship, marital or registered domestic/civil union partner status, gender identity and/or expression, or any other factor that the law protects from employment discrimination. All employment decisions are based on business needs, job requirements and individual qualifications. This policy applies to all terms and conditions of employment, including, but not limited to, recruitment and hiring, placement, promotion, termination, reductions in force, recall, transfer, leaves of absence, compensation and training. Any applicant or employee who needs a reasonable accommodation to apply for employment or to perform the essential functions of his or her job should email or call (615) 367-7467.

About Titan America

Titan America LLC (NYSE: TTAM), a TITAN Group Company, is one of the premier producers of cement and building materials in the eastern United States and the North American subsidiary of the TITAN Group. With a history spanning over 100 years, Titan America has consistently delivered innovation, operational excellence, and sustainable solutions. Our comprehensive portfolio—including cement, aggregates, fly ash, ready-mix concrete, and specialty admixtures—serves diverse customer needs across commercial, industrial, and infrastructure markets.

We have an excellent opportunity within our Procurement department in Norfolk, VA.

The Purchasing Agent is responsible for sourcing goods and services, managing supplier relationships, supporting RFQ processes, and ensuring timely and cost‑effective procurement in alignment with Titan America’s operational needs. This role works closely with operations, maintenance, engineering, and finance teams to support plant requirements and corporate procurement strategies.

Key Responsibilities

Procurement & Sourcing

• Execute purchasing activities for raw materials, equipment, services, and project-related items.
• Prepare, issue, and analyze RFQs and RFPs to ensure competitive pricing and quality.
• Evaluate supplier proposals, perform cost analysis, and make recommendations based on total cost of ownership.
• Negotiate pricing, contract terms, delivery schedules, and service agreements.

Supplier Management

• Identify, qualify, and manage suppliers to ensure reliability, quality, and compliance with Titan America standards.
• Track and monitor supplier performance using KPIs such as on‑time delivery, quality, and responsiveness.
• Resolve supplier issues related to price discrepancies, delivery delays, or quality concerns.

Operational Support

• Collaborate with plant operations, maintenance, and engineering to understand material needs and project requirements.
• Manage purchase order creation, ensuring accuracy and timely processing.
• Maintain accurate procurement records, forecasts, and spend data.

Compliance & Process Improvement

• Ensure all procurement activities follow company policies, contracts, and risk‑management protocols.
• Support continuous improvement initiatives to enhance procurement processes, cost savings, and efficiency.
• Assist with contract management, vendor onboarding, and database maintenance within the ERP system.

Qualifications

Required

• Bachelor’s degree in Business, Supply Chain, Engineering, or related field or equivalent experience.
• 2+ years of procurement, purchasing, or supply chain experience (manufacturing or industrial environment preferred).
• Strong negotiation, analytical, and communication skills.
• Experience with RFQs, supplier evaluation, and purchase order management.
• Proficiency with ERP systems (SAP, Oracle, JD Edwards, or similar).
• Ability to manage multiple priorities in a fast-paced environment.

Preferred

• Experience with category management (raw materials, industrial equipment, spares and consumables, services).
• Knowledge of commercial contracting and vendor performance management.
• Familiarity with inventory control and logistics processes.
• Professional certifications (CPSM, CPM, CSCP) a plus.

Key Competencies

• Results‑driven with strong attention to detail
• Financial and cost‑analysis acumen
• Strong relationship‑building skills
• Problem‑solving and decision‑making ability
• Ability to work cross‑functionally and independently

Work Environment

• Office-based role with occasional visits to plant or supplier locations.
• Regular interaction with internal teams and external vendors.

Production Planning Engineer

Shipbuilding

Chesapeake, VA (Onsite)

Full-Time

$90,000–$100,000 + Benefits

Why This Role Matters

We are supporting a well-established steel fabrication and manufacturing operation delivering complex work in a high-throughput industrial environment. This role sits at the center of production execution, aligning schedules, materials, labor, and equipment to ensure efficient, predictable fabrication output.

The Production Planning Engineer provides real-time visibility into production status, capacity, and work-in-progress, partnering closely with manufacturing, engineering, materials, quality, and purchasing teams to keep operations moving.

Key Responsibilities

• Develop, issue, and maintain detailed production schedules for fabrication and manufacturing
• Adjust plans to account for changing priorities, material availability, and shop constraints
• Coordinate material flow and readiness to support production execution
• Align labor and equipment resources with production demands and capacity
• Translate engineering drawings and specifications into executable shop plans
• Monitor work-in-progress, schedule adherence, and production status
• Identify bottlenecks, risks, and inefficiencies; recommend corrective actions
• Support shop floor execution with accurate, actionable planning data
• Prepare and manage production work orders and planning documentation
• Coordinate internal purchase requests as required

What They’re Looking For

• Bachelor’s degree in Engineering (Industrial, Mechanical, Manufacturing, or related) or equivalent experience
• 5+ years supporting production planning in a fabrication or manufacturing environment
• Strong understanding of manufacturing processes, BOMs, shop controls, and costing
• Experience working with materials, logistics, purchasing, and production teams
• Proficiency with Excel and standard Microsoft Office tools, CAD experience (AutoCAD or similar)
• Heavy manufacturing, steel fabrication, construction, or shipyard environment

Submit resume to or apply online.

Company Description

Press Ganey is the leading experience measurement, data analytics, and insights provider for complex industries-a status we earned over decades of deep partnership with clients to help them understand and meet the needs of their key stakeholders. Our earliest roots are in U.S. healthcare -perhaps the most complex of all industries. Today we serve clients around the globe in every industry to help them improve the Human Experiences at the heart of their business. We serve our clients through an unparalleled offering that combines technology, data, and expertise to enable them to pinpoint and prioritize opportunities, accelerate improvement efforts and build lifetime loyalty among their customers and employees.

Like all great companies, our success is a function of our people and our culture. Our employees have world-class talent, a collaborative work ethic, and a passion for the work that have earned us trusted advisor status among the world's most recognized brands. As a member of the team, you will help us create value for our clients, you will make us better through your contribution to the work and your voice in the process. Ours is a path of learning and continuous improvement; team efforts chart the course for corporate success.

Our Mission:

We empower organizations to deliver the best experiences. With industry expertise and technology, we turn data into insights that drive innovation and action.

Our Values:

To put Human Experience at the heart of organizations so every person can be seen and understood.

• Energize the customer relationship:Our clients are our partners. We make their goals our own, working side by side to turn challenges into solutions.

• Success starts with me:Personal ownership fuels collective success. We each play our part and empower our teammates to do the same.

• Commit to learning:Every win is a springboard. Every hurdle is a lesson. We use each experience as an opportunity to grow.

• Dare to innovate:We challenge the status quo with creativity and innovation as our true north.

• Better together:We check our egos at the door. We work together, so we win together.

Location: Remote (U.S.) or Hybrid from Chicago, Boston, or South Bend hubs
Travel: Up to 25%

Position Overview: Patient Experience Advisor

As a Patient Experience Advisor, you will serve as a strategic partner to our clients, owning the day-to-day relationship focused on driving meaningful improvements in patient experience. You'll bring a deep understanding of the healthcare landscape-including key trends, challenges, and priorities-and use that knowledge to guide clients toward impactful solutions.

In this role, you'll collaborate cross-functionally with internal teams and client stakeholders to align on strategy, identify opportunities, and implement support processes that advance the client's patient experience goals. You'll leverage data analytics, industry best practices, peer networking, and Press Ganey's proprietary programs to deliver proactive insights that inform client decision-making.

Job Responsibilities include:

• Lead the day-to-day execution of client improvement strategies, ensuring seamless coordination across Press Ganey support teams.

• Develop a deep understanding of client stakeholder challenges and priorities, and align Press Ganey's solutions and insights to support strategic decision-making.

• Deliver both on-demand and proactive improvement support, leveraging analytics and thought leadership to demonstrate Press Ganey's differentiated value.

• Collaborate cross-functionally with internal teams-including consulting, marketing, data science, and knowledge management-to create and adapt innovative resources such as toolkits, blogs, case studies, and scalable insights tailored to key stakeholders.

• Partner with Application Support Specialists to ensure timely and strategic follow-through that aligns with each client's patient experience (PX) strategy.

• Work closely with product, technology, and delivery teams to identify emerging market trends and inform future solution development.

• Coordinate and present regular client performance reviews in partnership with the Managing Director.

• Lead and support industry programs, webinars, online communities, and events that foster client networking and reinforce Press Ganey's value proposition.

• Collaborate with the Growth team to identify client needs and opportunities for improvement, delivering best practice recommendations that drive measurable impact.

• Experience: 5+ years in healthcare, with a strong focus on patient experience improvement initiatives.

• Expertise: In-depth knowledge of Hospital CAHPS (HCAHPS) and Clinician & Group CAHPS (CG-CAHPS), & Medical Practice required.

• Skills: Exceptional interpersonal, communication, and presentation skills, with a polished executive presence.

• Analytical Ability: Strong grasp of improvement methodologies, data analytics, and industry best practices.

• Mindset: Passionate about patient experience, proactive in problem-solving, and committed to follow-through.

• Adaptability: Comfortable in a fast-paced environment with the ability to manage multiple priorities.

• Travel: Willingness to travel up to 25% for client engagements.

• Bachelor's degree required.

To work #BetterTogether, we embrace a hybrid model for team members located near our hubs in Chicago, South Bend, or Boston. We gather in-office three days a week (Tuesday-Thursday), with remote flexibility on other days. This schedule may adjust based on travel needs.

Don't meet every single requirement?Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single qualification. At Press Ganey we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles.

Additional Information for US based jobs:

Press Ganey Associates LLC is an Equal Employment Opportunity/Affirmative Action employer and well committed to a diverse workforce. We do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, veteran status, and basis of disability or any other federal, state, or local protected class.

Pay Transparency Non-Discrimination Notice - Press Ganey will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.

The expected base salary for this position ranges from $81,000 - $115,000. It is not typical for offers to be made at or near the top of the range. Salary offers are based on a wide range of factors including relevant skills, training, experience, education, and, where applicable, licensure or certifications obtained. Market and organizational factors are also considered. In addition to base salary and a competitive benefits package, successful candidates are eligible to receive a discretionary bonus or commission tied to achieved results.

All your information will be kept confidential according to EEO guidelines.

Our privacy policy can be found here:legal-privacy/

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

The Company

VINCI Construction Grands Projets USA (formally VINCI Construction LLC) is a subsidiary of VINCI Construction Grands Projets with its main office located in Alexandria, Virginia. The scope of the company is general contracting and construction work, along with any associated services related to large, selected Design and Build projects, either public or private for which it can bring clear and strong added value. We aim to develop engineering and construction services for large infrastructure projects in various parts in the United States and provide a highly skilled and competitive professional service in construction field.

Project Overview:

As part of the Hampton Roads Connector Partners (HRCP) Joint Venture (JV) consisting of VINCI Construction, Dragados, and Flatiron has been selected to construct the $3.3BN Design Build project – the largest civil construction contract ever awarded by the Virginia Department of Transportation (VDOT).

The project scope across a 9-mile section of the I-64 will include: a new 3.5-mile bridge-tunnel crossing that will accommodate a total of 8 lanes of capacity across the water, replacement of the existing marine approach bridges and the addition of a third lane on I-64 in each direction. The twin 45’ diameter 1.5-mile tunnels will be bored by TBM, creating the second largest TBM tunnel opening for a TBM in North America. The project is expected to continue to the beginning of 2027.

Responsibilities:

As a Civil Works General Superintendent on the $3.3BN Hampton Roads Bridge Tunnel Expansion Project (HRBT) in Virginia, you will schedule, coordinate, and supervise production and workforce engaged on your assigned area of the project.

• Supervises assigned project work and liaises between field engineering, estimating, and workforce to ensure
• project compliance with contract drawings and specifications.
• Plans work methods, materials, equipment needs, and work schedule for assigned project work. Reviews
• daily work schedule with direct reports, and provides input for weekly/monthly schedule updates based on
• project feedback.
• Reviews and understands the project specifications to support job setup activities. Works with work crews,
• field engineers and local utility companies to identify hazardous areas on the job site.
• Presents production work plan during initial project meeting to ensure all project crews and leaders are in
• alignment.
• Coordinates with the internal equipment team and external vendors to ensure that the project is equipped with
• appropriate equipment and material quantities to complete production within the assigned budget and
• schedule.
• Forecasts the work schedule to identify possible issues and provides technical or scheduling support
• recommendations to mitigate production issues.
• Provides technical input to identify and resolve project risks, including construction methods, work plan, material requirements, safety, and schedule activities. Documents daily activities and meeting notes using
• Company-approved document methods.
• Coordinates with internal and external departments to ensure all mandated inspections are completed
• within the requested timeframes.
• Supports and promotes strict adherence to safety and process controls regarding operating equipment,
• worksite safety and documentation requirements.
• Supervises subcontractor production and workforce regarding assigned project work. Recommends work
• schedule or work-method adjustments regarding subcontractor activities, as needed.
• Coordinates projects close out activities in line with project standards and Owner checklist requirements.

Qualifications and Skills:

Required:

• 7+ years of heavy civil construction experience (roads/bridges/marine/tunneling), with at least 3+ years of management experience required.
• Bachelor's Degree
• Strong written, verbal, and presentation skills are required.
• Strong leadership capability with internal drive to mentor and grow internal talent.
• Advanced knowledge of the construction site equipment operation and maintenance
• requirements.
• Advanced knowledge of construction site safety protocols and proven ability to enforce the project safety programs.
• Ability to read, analyze, and interpret standards and contract-specific plans and specifications.
• Ability to work with mathematical concepts such as probability and statistics, and fundamental geometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Valid Driver’s License
• Proficiency with Microsoft 365 (Outlook, Excel, Word, Teams, SharePoint)
• Strong knowledge of civil construction methods, techniques, and best practices.
• Excellent project management and organizational skills.
• Strong leadership and team management abilities.

Work Environment:

• The position requires extensive on-site presence, often in challenging and potentially hazardous conditions.
• Occasional office work for project planning and reporting.
• Working on uneven and potentially hazardous terrain, including working at heights, underground, or near water bodies depending on the bridge/ tunnel location.
• Exposure to extreme temperatures as well as high levels of noise and varying levels of dust.

Physical Demands:

• The employee is required to stand; walk; climb ladders; sit; use hands, climb stairs; balance; stoop, kneel, crouch or crawl.
• Must be able to lift 50lb or more.
• Required to wear personal protective equipment (PPE) such as hard hats, safety glasses, and reflective vests when on-site.

VINCI Construction Grands Projets USA offers all full-time employees competitive wages and benefits, including:

• Medical, Dental & Vision Insurance
• Health Reimbursement Account (HRA)
• Vacation Leave
• Sick Leave
• Paid Holidays
• Company 401(k) Matching Contributions
• Employee Assistance Program (EAP)
• Commuter Benefits Program
• Parental Leave
• Term Life & AD&D Insurance
• Short & Long-Term Disability Insurance
• Employee Stock Ownership Plan (ESOP)
• Professional Development & Training
• Health and Wellness Spending Account

VCGP USA is an Equal Opportunity Employer, Disability/ Veteran. Please click on the attached link to see a digital copy of the Federal, State, and Federal Contractor Posters

• 4-day schedule (Monday-Friday) with no weekends.
• Be part of a growing and evolving practice, helping to define culture, processes, and client experience.
• Opportunity to take an active role in rebuilding and reimagining a veterinary practice.
• Work closely with a skilled medical team while delivering exceptional patient and client care.

• Provide exceptional patient and client care by ensuring an efficient exam room workflow.
• Maintain accurate, detailed medical records.
• Review treatment plans and discharge instructions with clients, answering questions with empathy and clarity.
• Support the veterinarian's orders during outpatient care and procedures to ensure the highest level of patient care.

• Compensation: $27-32 per hour, for each hour worked*
• Bonus package: $2000
• CE allowance: up to $1,000 annually based on tenure
• Health package: Medical, dental, and vision insurance
• Life insurance and disability
• Employee Assistance Program
• 401k options
• PTO accrual starting at 80 hours annually + 6 paid holidays
• Generous personal pet discounts

• 3+ years of veterinary experience in a clinical setting
• Current Veterinary Technician License in the state of VA
• Proficiency in the following skills:
  • Strong clinical skills in patient assessment, treatment, and medical record management.
  • Skilled in injections, microscopic evaluation, sample collection, radiology, venipuncture, and gentle animal handling and restraint.
  • While initially our surgical schedule will be limited, the ideal candidate will have proficiency in anesthesia induction and maintenance, surgical set-up, and assisting in surgery.
  • Proficient in supporting veterinarians during exams and outpatient procedures.
  • Excellent client communication, with the ability to explain treatment plans, client demonstrations, and discharge instructions clearly and empathetically.

We’re building a world of health around every individual — shaping a more connected, convenient and compassionate health experience. At CVS Health®, you’ll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger – helping to simplify health care one person, one family and one community at a time.

• Bring your heart into every visit, joining a national network of purpose-driven clinicians dedicated to improving health outcomes
• Be part of our efforts to visit millions of people nationwide with the goal of providing connections to the right care for people’s unique needs
• Work with Signify Health as a clinician colleague, fulfilling the requirements of the specified role
• Be flexible to travel locally and within licensed states, as needed
• Conduct virtual visits as needed
• Provide all Signify Health services as indicated including Diagnostic & Preventive Services products (i.e., spirometry, DEE, bone density screening, etc.)

• Health, dental and vision insurance
• Paid time off
• Annual CEU allowance
• 401K
• Supplies and other perks
• Malpractice coverage

• Active, unrestricted license(s) in coverage area(s)
• Board certification (required)
• Multi-state licenses (preferred)
• Able to cover the following primary locations:

Anticipated Weekly Hours

Time Type

Pay Range

The typical pay range for this role is:

This pay range represents the base hourly rate or base annual full-time salary for all positions in the job grade within which this position falls.  The actual base salary offer will depend on a variety of factors including experience, education, geography and other relevant factors.  
 

Our people fuel our future. Our teams reflect the customers, patients, members and communities we serve and we are committed to fostering a workplace where every colleague feels valued and that they belong.

Great benefits for great people

We take pride in our comprehensive and competitive mix of pay and benefits – investing in the physical, emotional and financial wellness of our colleagues and their families to help them be the healthiest they can be. In addition to our competitive wages, our great benefits include:

• Affordable medical plan options, a 401(k) plan (including matching company contributions), and an employee stock purchase plan.

• No-cost programs for all colleagues including wellness screenings, tobacco cessation and weight management programs, confidential counseling and financial coaching.

• Benefit solutions that address the different needs and preferences of our colleagues including paid time off, flexible work schedules, family leave, dependent care resources, colleague assistance programs, tuition assistance, retiree medical access and many other benefits depending on eligibility.

For more information, visit  anticipate the application window for this opening will close on: 12/31/2026

Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state and local laws.