Engineering Structures Impact Factor Jobs in Tacoma

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Job Description

The Boeing Commercial Airplanes Liaison Engineering Organization is seeking Consultant (Level 5) Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington . We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.

This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.

Position Responsibilities: 

• Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
• Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
• Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
• Develops and implements product/process improvements.
• Supports Integrated Product Teams (IPT) and participates in design reviews.
• Represents the engineering community from initial build through the production and post-production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Participates in on-site disabled product repair teams, accident investigation and support teams.
• Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
• Designs interim structural repairs and conducts static strength analysis.
• Develops non-destructive test procedures, tools and standards.

This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.

This position participates in the approximately 9-month Boeing Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Boeing Puget Sound sites during the training rotation.

Basic Qualifications (Required Skills/Experience): 

• Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
• 14+ years of experience in structures, systems, design, or production engineering

Preferred Qualifications (Desired Skills/Experience): 

• Hands-on experience with materials and manufacturing processes.
• Prior BCA Engineering Material Review Board (MRB) Certification

Conflict of Interest:

 Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment 
process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for multiple shifts and may require off shift, weekend, and travel assignments.

The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.

Union:

This is a union represented position.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

 

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

• Summary pay range for Expert (level 5): $165,750 - $224,250

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.

• Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.

• Scribe tooling locations and reference lines as specified in engineering drawings and specifications.

• Diagnose and correct any detected discrepancies in parts and processes.

• Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).

• Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.

• Operate ground-controlled handling equipment to load, unload, and move parts within the shop.

• Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.

• Locate points and holes from established reference lines or index points using prints, templates, and work orders.

• Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.

• Access workload using online computer systems and assign work based on priority or Team Leader direction.

• Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.

• Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.

• Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.

• Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Basic computer experience and competency.

• Experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training in reading and interpreting drawings or blueprints.

• 2+ years of experience using hand tools and/or hand-held power tool

• Able to close tolerance drill within .003 and able to precision measure between .003.

• Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• 2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.

• Ability to close tolerance.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 23, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.

• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.

• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.

• Operate, use and maintain overhead maintenance work platforms

• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.

• Inspect and maintain building runway rails and expansion joints.

• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.

• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.

• Maintain logs, charts, and perform written and verbal tie-in records.

• Prepare reports and schedules as required.

• Work with and assist employees of other classifications as required.

• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.

• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Prospect Construction is a Heavy Civil Contractor that specializes in water and wastewater treatment plants, hydraulic structures/facilities, shoring systems, large concrete tanks, pump stations/process facilities, dewatering, major excavations, structural steel, process equipment, and mechanical systems. Prospect began as a General Contractor in 1998, with our first office location in Puyallup Washington. Over the last few decades, Prospect has coupled its expertise in complex projects with its vast level of self-performance to grow into one of the premier treatment plant contractors in the West. This continued growth has allowed Prospect to bring our expertise into new geographical regions, with the establishment of our offices in Missoula, Montana and Sheridan, Wyoming.

Why do we exist? Prospect Construction seeks to glorify God by providing opportunities for our employees to utilize their unique gifts through construction to benefit and serve our families, stakeholders, and community. What do we do? We construct unique, complex, and challenging projects for our clients throughout the west.

Description Summary:

The Chief Heavy Civil Estimator is responsible for leading the company’s heavy civil estimating strategy, execution, and team development across all offices. This role will oversee a group of estimators operating from a centralized estimating location and will support bids for projects throughout the company’s footprint.

This position is a key leadership role in expanding the company’s heavy civil capabilities into new and existing markets including dams and water resource infrastructure, mass grading, mining support infrastructure, underground utilities, pipelines, and large-scale site development. The Chief Heavy Civil Estimator will produce accurate, complete, and competitive estimates and will build repeatable estimating systems that drive profitable growth.

Essential Duties and Responsibilities for Civil Estimator:

• Lead and manage a team of estimators responsible for heavy civil bids across all offices.
• Assign estimating responsibilities, coordinate workloads, and ensure bid schedules are met.
• Develop and mentor estimating staff through coaching, training, and performance feedback.
• Establish clear estimating workflows, standards, review processes, and deliverables.
• Lead preparation of competitive and complete estimates for heavy civil and large development pursuits.
• Perform detailed quantity takeoffs, pricing, labor and equipment productions, and bid-leveling.
• Develop pricing strategies and collaborate with leadership to determine bid markups, general conditions, contingency, and schedule impacts.
• Coordinate bid reviews and executive-level presentations prior to submission.
• Support expansion into new heavy civil markets and project types including:
• Dams / levees / water infrastructure
• Mass grading / earthwork
• Mining and mine infrastructure
• Wet and dry utilities
• Pipeline – Water/Sewer/Oil/Gas
• Large developments and site infrastructure
• Build estimating models, assemblies, means-and-methods assumptions, and productivity benchmarks for emerging work types.
• Identify equipment needs, subcontractor requirements, and labor production assumptions to support new civil capabilities.
• Ensure all estimates include complete scope coverage, clear assumptions, and appropriate risk allocation.
• Identify project risks and opportunities including logistics, access, production constraints, seasonal impacts, and design ambiguities.
• Support constructability reviews and sequencing concepts that align with execution strategies.
• Ensure the bid complies with owner requirements, bid forms, and proposal instructions.
• Solicit subcontractor pricing and scope input for specialty work (dewatering, drilling, blasting, shoring, etc.).
• Evaluate subcontractor quotes for completeness and accuracy; manage bid leveling and scope alignment.
• Assist in development of strategic partnerships for emerging markets and scopes.
• Maintain and improve a heavy civil cost database including labor, equipment, materials, trucking, and subcontractor benchmarks.
• Track estimate performance and contribute to lessons learned based on job cost results and field feedback.
• Coordinate with operations, project management, and field leadership to validate means/methods and production assumptions.
• Participate in turnover meetings and support transition from bid to execution.
• Assist operations in early project planning, budgeting, and buyout strategy as needed.

Knowledge & Skills:

• Minimum of 10 years of experience as a Civil Construction Estimator
• Proven experience leading estimating efforts on complex heavy civil projects
• Demonstrated success managing or mentoring estimators and leading bid teams.
• Strong understanding of:
• Heavy civil means and methods
• Equipment spreads and production rates
• Construction scheduling impacts
• Labor, trucking, and material pricing models
• Risk management and bid strategy
• Advanced understanding of data analysis methods
• Familiarity with civil estimating computer software
• Ability to interpret civil plans, specs, geotechnical reports, contract terms and design documents
• Strong written and verbal communication skills and ability to present to senior leadership
• Highly organized, deadline-driven, and capable of managing multiple concurrent pursuits
• Critical-thinker and problem-solver
• BA in engineering, construction science or similar relevant field
• Experienced with HCSS and Timberline estimating software

You Belong Here.

At MultiCare, we strive to offer a true sense of belonging for all our employees. Across our health care network, you will find a dynamic range of meaningful careers, opportunities for growth, safe workplaces, and flexible schedules. We are connected by our mission - partnering and healing for a healthy future - and dedicated to the health and well-being of the communities we serve.

FTE: 1.0, Shift: Days, Schedule: M-F

Clincial .70 FTE Salary $315,912.80

Admin .30 FTE Salary min $105,000 - Salary max $150,000

Position Summary

The RMD works to manage the functions of Primary Care to ensure performance to strategic and operational objectives delineated by MMP and MultiCare Health System (MHS) leadership. The RMD works collaboratively with MHS and MMP leadership, providing supervision and oversight of the Site Medical Managers (SMMs), physicians and advanced practice providers in Women’s Health.

Principle Accountabilities:

• Positively contributes to organizational culture, leading in alignment with organizational mission, vision, and values.
• The RMD demonstrates operational excellence in dyad partnership with the Service Line AVP in the areas of fiscal access to care, patient experience, quality improvement, clinical outcomes, and employee and physician/APP engagement. The RMD is responsible for leading initiatives in care delivery, clinical quality, and performance improvement, to meet organizational objectives. 
• Holds providers and other caregivers accountable to performance expectations and goals, serving to support escalations as needed from the Site Medical Manager (SMM).
• Partners with dyad (AVP) in the development of and adherence to annual budgets, call schedules, clinic coverage, coding and documentation, patient grievances, and staff interactions.
• Collaborates and coordinates Division outreach activities both internally and externally as needed under the direction of the MMP Executive Medical Director (EMD) or Chief Medical Officer (CMO).
• Assists the EMD and/or CMO in managing the structure of the employed medical staff including supporting medical staff recruitment programs designed to recruit additional providers to the System’s service area.
• In close collaboration with MMP leaders, the RMD is accountable, from a clinical leadership perspective, to explain various rationales and performance plans to achieve the outcomes necessary to achieve MHS Strategies including:
• Clinical performance that supports System Performance Objectives.
• Appropriate adherence to MMP and MHS cultural, behavioral, administrative, and clinical standards.
• Operational performance necessary to achieve the Quadruple Aim (Better Experience of Care, Better Health for Populations, Lower per Capita Cost and Provider Professional Fulfillment).
• Financial performance required for sustainability.
• Opportunities for improvement or new Clinical Initiatives.
• Opportunities for “bright spot” or other methodologies to communicate rapid cycle process improvement successes.
• Employee, physician/APP and patient engagement.

Care Line Specific Responsibilities:

For clarification purposes, in the role as Regional Medical Director, it is expected that the Physician will attend meetings to discuss operational issues, planning or execution of initiatives to enhance performance, safety or quality initiatives which are specific to his/her administrative role, where such attendance shall be compensated at the rate set forth above. It is assumed that the physician, as a Medical Staff member, would attend relevant Medical Staff meetings that relate to his/her provision of professional services at Hospital regardless of whether or not Physician served as Regional Medical Director; consequently, the Medical Director shall not be compensated for routine attendance at such meetings. Medical Staff meetings that will not be routinely compensated for under this Agreement include meetings such as department meetings, Special Peer Review meetings, QRM Committee, Medical Executive Committee, Credentials Committee, General Staff meetings, Medical Staff townhalls, and official Board of Directors meetings and subcommittee meetings. A list of activities that generally qualify, or do not qualify, for Medical Director payment is included below:

Qualifying Activities:

• Department-specific quality improvement activities and meetings.
• Operations activities and meetings.
• Supply management activities and meetings.
• Patient experience activities and meetings.
• Clinical protocol/evidence -based care development.
• Electronic medical record implementation and optimization work, and similar work on other IT implementation projects that require physician participation.
• Strategic planning.
• Physician mentoring and proctoring.
• Presentation time and presentation prep time for items presented at Medical Staff meetings or other network forums.
• Participation in network-wide collaborative meetings.
• E-mail/verbal communication time devoted to the Medical Director role (must be documented).

REQUIREMENTS:

• Graduate of an accredited medical school (MD or DO).
• Licensure to practice medicine in Washington State as a Physician.
• Board certification or similar accreditation in Obstetrics and Gynecology, Midwifery, Maternal/Fetal Medicine, Urogynecology, and Minimally Invasive Gynecology or another similar medical specialty.
• Two (2) years of clinical practice experience preferred.
• Formal leadership training and experience preferred.
• Prior management/leadership or directorship roles in hospital, managed care and/or medical group practice preferred.

Our Values

As a MultiCare employee, we'll rely on you to reflect our core values of Respect, Integrity, Stewardship, Excellence, Collaboration, Kindness and Joy. Our values serve as our guiding principles and impact every aspect of our organization, including how we provide patient care and what we expect from each other.

Why MultiCare?

• Belonging: We work to create a true sense of belonging for all our caregivers
• Mission-driven: We are dedicated to our mission of partnering for healing and a healthy future and the patients and communities we serve
• Market leadership: Washington state's largest community-based, locally governed health system
• Employee-centric: Named Forbes “America’s Best Employers by State” in 2023
• Technology: "Most Wired"?health care?system 15 years in a row
• Leading research: MultiCare Institute for Research & Innovation, 40 years of ground-breaking, clinical and health services research in our communities
• Lifestyle: Live and work in the Pacific Northwest - offering breathtaking water, mountains and forest at every turn.

Pay and Benefit Expectations

We provide a comprehensive benefits package, including competitive salary, medical, dental and retirement benefits and paid time off. As required by various pay transparency laws, we share a competitive range of compensation for candidates hired into each position. The pay scale is $350,000.00 - $500,000.00 USD. However, pay is influenced by factors specific to applicants, including but not limited to: skill set, level of experience, and certification(s) and/or education. If this position is associated with a union contract, pay will be reflective of the appropriate step on the pay scale to which the applicant’s years of experience align.

Associated benefit information can be viewed here .

FTE: 1.0, Shift: Days, Schedule: M-F

Clinical .70 FTE Salary min $253,320.90 - Salary max $281,467.90

Admin .30 FTE Salary min $105,000 - Salary max $150,000

Position Summary

The Regional Medical Director (RMD), Women’s Health has direct responsibility, in conjunction with leadership personnel within MultiCare Medical Partners (MMP), for the operational, clinical, and financial performance for a service line or group of related care lines within a region that make up a clinical division. In partnership with the Service Line Assistant Vice President (AVP), the RMD provides administrative medical leadership for clinical and business planning, expansion of growth and access, clinical performance, and quality outcomes.

The RMD works to manage the functions of Primary Care to ensure performance to strategic and operational objectives delineated by MMP and MultiCare Health System (MHS) leadership. The RMD works collaboratively with MHS and MMP leadership, providing supervision and oversight of the Site Medical Managers (SMMs), physicians and advanced practice providers in Women’s Health.

Principle Accountabilities:

• Positively contributes to organizational culture, leading in alignment with organizational mission, vision, and values.
• The RMD demonstrates operational excellence in dyad partnership with the Service Line AVP in the areas of fiscal access to care, patient experience, quality improvement, clinical outcomes, and employee and physician/APP engagement. The RMD is responsible for leading initiatives in care delivery, clinical quality, and performance improvement, to meet organizational objectives.
• Holds providers and other caregivers accountable to performance expectations and goals, serving to support escalations as needed from the Site Medical Manager (SMM).
• Partners with dyad (AVP) in the development of and adherence to annual budgets, call schedules, clinic coverage, coding and documentation, patient grievances, and staff interactions.
• Collaborates and coordinates Division outreach activities both internally and externally as needed under the direction of the MMP Executive Medical Director (EMD) or Chief Medical Officer (CMO).
• Assists the EMD and/or CMO in managing the structure of the employed medical staff including supporting medical staff recruitment programs designed to recruit additional providers to the System’s service area.
• In close collaboration with MMP leaders, the RMD is accountable, from a clinical leadership perspective, to explain various rationales and performance plans to achieve the outcomes necessary to achieve MHS Strategies including:
  • Clinical performance that supports System Performance Objectives.
  • Appropriate adherence to MMP and MHS cultural, behavioral, administrative, and clinical standards.
  • Operational performance necessary to achieve the Quadruple Aim (Better Experience of Care, Better Health for Populations, Lower per Capita Cost and Provider Professional Fulfillment).
  • Financial performance required for sustainability.
  • Opportunities for improvement or new Clinical Initiatives.
  • Opportunities for “bright spot” or other methodologies to communicate rapid cycle process improvement successes.
  • Employee, physician/APP and patient engagement.

Care Line Specific Responsibilities:

For clarification purposes, in the role as Regional Medical Director, it is expected that the Physician will attend meetings to discuss operational issues, planning or execution of initiatives to enhance performance, safety or quality initiatives which are specific to his/her administrative role, where such attendance shall be compensated at the rate set forth above. It is assumed that the physician, as a Medical Staff member, would attend relevant Medical Staff meetings that relate to his/her provision of professional services at Hospital regardless of whether or not Physician served as Regional Medical Director; consequently, the Medical Director shall not be compensated for routine attendance at such meetings. Medical Staff meetings that will not be routinely compensated for under this Agreement include meetings such as department meetings, Special Peer Review meetings, QRM Committee, Medical Executive Committee, Credentials Committee, General Staff meetings, Medical Staff townhalls, and official Board of Directors meetings and subcommittee meetings. A list of activities that generally qualify, or do not qualify, for Medical Director payment is included below:

Qualifying Activities:

• Department-specific quality improvement activities and meetings.
• Operations activities and meetings.
• Supply management activities and meetings.
• Patient experience activities and meetings.
• Clinical protocol/evidence -based care development.
• Electronic medical record implementation and optimization work, and similar work on other IT implementation projects that require physician participation.
• Strategic planning.
• Presentation time and presentation prep time for items presented at Medical Staff meetings or other network forums.

REQUIREMENTS:

• Graduate of an accredited medical school (MD or DO).
• Licensure to practice medicine in Washington State as a Physician.
• Board certification or similar accreditation in Obstetrics and Gynecology, Midwifery, Maternal/Fetal Medicine, Urogynecology, and Minimally Invasive Gynecology or another similar medical specialty.
• Two (2) years of clinical practice experience preferred.
• Formal leadership training and experience preferred.
• Prior management/leadership or directorship roles in hospital, managed care and/or medical group practice preferred.

Our Values

As a MultiCare employee, we'll rely on you to reflect our core values of Respect, Integrity, Stewardship, Excellence, Collaboration, Kindness and Joy. Our values serve as our guiding principles and impact every aspect of our organization, including how we provide patient care and what we expect from each other.

Why MultiCare?

• Belonging: We work to create a true sense of belonging for all our caregivers
• Mission-driven: We are dedicated to our mission of partnering for healing and a healthy future and the patients and communities we serve
• Market leadership: Washington state's largest community-based, locally governed health system
• Employee-centric: Named Forbes “America’s Best Employers by State” in 2023
• Technology: "Most Wired"?health care?system 15 years in a row
• Leading research: MultiCare Institute for Research & Innovation, 40 years of ground-breaking, clinical and health services research in our communities
• Lifestyle: Live and work in the Pacific Northwest - offering breathtaking water, mountains and forest at every turn.

Pay and Benefit Expectations

We provide a comprehensive benefits package, including competitive salary, medical, dental and retirement benefits and paid time off. As required by various pay transparency laws, we share a competitive range of compensation for candidates hired into each position. The pay scale is $350,000.00 - $500,000.00 USD. However, pay is influenced by factors specific to applicants, including but not limited to: skill set, level of experience, and certification(s) and/or education. If this position is associated with a union contract, pay will be reflective of the appropriate step on the pay scale to which the applicant’s years of experience align.

Associated benefit information can be viewed here.