Engineering Structures Impact Factor Jobs in Ruby Louisiana Flexible
856 positions found
Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.
Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.
Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.
The basic requirements of a woman to serve as a surrogate are:
- Emotionally stable
- Responsible
- In good physical health
- Non-smoker
- Has had at least one successful pregnancy
- Is capable of carrying a child to full term
A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.
In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.
Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.
Nurse Supervisor Career Opportunity
$10k Sign On Bonus
Walk-In Wednesday On-Site Interviews from 9am-3pm
Leading with Heart: Your Journey Starts Here
Seeking a career that's both personally enriching and professionally rewarding, close to home? Encompass Health invites you into a welcoming space that feels like family, where your worth is embraced, fostering connections akin to lifelong friendships. As a Nurse Supervisor, envision making a profound impact within your community by providing essential care and guidance throughout patients' rehabilitation journeys. Your role is critical, offering leadership ensuring seamless implementation of procedures while delivering top-tier, compassionate, and tailored care. Embrace a team-driven, supportive environment that embraces joy in their work, providing access to cutting-edge technology and comprehensive benefits from day one. Join us and discover a career where your leadership shapes impactful care and personal fulfillment.
A Glimpse into Our World
We're confident you'll feel the difference the moment you join our team. Being at Encompass Health means being associated with a growing national inpatient rehabilitation leader. We take pride in our career growth opportunities and the collaborative spirit of our team members, all united for the greater good of our patients. Our achievements, including being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, make us immensely proud.
BenefitsThatBeginWith You
- Our benefits are designed to support your well-being and startonday one:
- Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.
- Generous paid time off that accrues over time.
- Tuition reimbursement and continuous education opportunities for your professional growth.
- Company-matching 401(k) and employee stock purchase plans, securing your financial future.
- Flexible spending and health savings accounts tailored to your unique needs.
- A vibrant community of individuals who are passionate about what they do.
Be the Nurse Supervisor You've Always Aspired to Be
- Your impactful journey involves:
- Assisting in the development and implementation of personalized patient care programs, policies, and procedures.
- Serving as the crucial liaison between administration, nursing management, and staff.
- Supervising nursing care, treatment, and services provided during assigned shifts or on a specific unit.
- Monitoring and managing staff, including on-the-spot feedback, annual evaluations, and administering performance counseling and discipline
- Assuming patient care as needed and building meaningful relationships with patients by dedicating time to understand their physical, mental, and emotional needs for a successful recovery.
- Celebrating patient victories along the way.
Qualifications
- Current RN licensure as required by state regulations.
- BLS certification with ACLS certification to be obtained within one year of starting position.
- CRRN certification to be obtained within a year of meeting the eligibility requirements.
- Bachelor's Degree in Nursing or related field preferred.
- Two years of recent experience in an inpatient hospital setting (within the last five years).
- Previous leadership role, such as charge nurse or lead capacity, where you were responsible for interim reporting, issue resolution, setting direction, and having accountability for patient and staff results.
Nurse Manager Career Opportunity
Walk-In Wednesday On-Site Interviews from 9am-3pm
Leading with Heart: Your Journey Starts Here
Seeking a career that's both personally enriching and professionally rewarding, close to home? Encompass Health invites you into a welcoming space that feels like family, where your worth is embraced, fostering connections akin to lifelong friendships. As a Nurse Manager, envision making a profound impact within your community by providing essential care and guidance throughout patients' rehabilitation journeys. Your role is critical, offering leadership ensuring seamless implementation of procedures while delivering top-tier, compassionate, and tailored care. Embrace a team-driven, supportive environment that embraces joy in their work, providing access to cutting-edge technology and comprehensive benefits from day one. Join us and discover a career where your leadership shapes impactful care and personal fulfillment.
A Glimpse into Our World
We're confident you'll feel the difference the moment you join our team. Being at Encompass Health means being associated with a growing national inpatient rehabilitation leader. We take pride in our career growth opportunities and the collaborative spirit of our team members, all united for the greater good of our patients. Our achievements, including being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, make us immensely proud.
Benefits That Begin With You
Our benefits are designed to support your well-being and start on day one:
- Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.
- Generous paid time off that accrues over time.
- Tuition reimbursement and continuous education opportunities for your professional growth.
- Company-matching 401(k) and employee stock purchase plans, securing your financial future.
- Flexible spending and health savings accounts tailored to your unique needs.
- A vibrant community of individuals who are passionate about what they do.
Be the Nurse Manager You've Always Aspired to Be
Your impactful journey involves:
- Supervises the provision of nursing care, treatment, and services on assigned shift or unit.
- Ensures all patient care activities are completed as required.
- Assigns the appropriate nursing personnel necessary to provide care and ensures their presence.
- ·Identifies training needs and resources for staff with other organizational leaders.
- Celebrating patient victories along the way.
Qualifications
- Current RN licensure as required by state regulations.
- BLS certification with ACLS certification to be obtained within one year of starting position.
- CRRN certification to be obtained within a year of meeting the eligibility requirements.
- Bachelor's Degree in Nursing or related field preferred.
- Five years of nursing experience with two years recently in an inpatient hospital setting
- Previous leadership role, such as charge nurse or lead capacity, where you were responsible for interim reporting, issue resolution, setting direction, and having accountability for patient and staff results.
Speech Pathologist Career Opportunity
Walk-In Wednesday On-Site Interviews from 9am-3pm
WelcometoEncompassHealth:WhereCompassionMeetsSpeech Therapy
Are you searching for a career that aligns with your passion and brings fulfillment close to home? At Encompass Health, we greet you like an old friend, fostering a sense of belonging right from the beginning. Imagine the chance to make a profound difference in your community by providing essential therapy and unwavering support to patients. Join our team as a Speech Pathologist and become a pivotal figure in assisting patients in overcoming speech and communication challenges. You'll find a supportive environment where small victories create monumental impacts and where you'll have access to cutting-edge technology while working for the nation's largest rehabilitation company. If this resonates with you, you're in the perfect place to make a meaningful impact.
A GlimpseintoOur World
Whether you're beginning your career or a seasoned Speech Pathologist looking for a nurturing environment to call home, we're confident you'll feel the difference the moment you join our team. Being a part of Encompass Health means being a part of a growing national inpatient rehabilitation leader. We take pride in our career growth opportunities and the collaborative spirit of our team members, united for the greater good of our patients. Our recognitions, including being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, make us immensely proud.
BenefitsThatBeginWith You
Our benefits are designed to support your well-being and startonday one:
- Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.
- Generous paid time off that accrues over time.
- Tuition reimbursement and continuous education opportunities for your professional growth.
- Company-matching 401(k) and employee stock purchase plans, securing your financial future.
- Flexible spending and health savings accounts tailored to your unique needs.
- A vibrant community of individuals who are passionate about what they do.
EmbraceYourRoleas aSpeech Pathologist
Your impactful journey involves:
- Evaluating, assessing, developing, and administering personalized treatment plans for patients with speech and language rehabilitation needs.
- Identifying issues and modifying speech therapy treatment if necessary.
- Tracking and documenting patient performance, progress, and response to treatment.
- Celebrating patient victories along the way.
Qualifications
- Current licensure or certification required by state regulations.
- Successful completion of SLP Certification of Clinical Competence (CCC).
- CPR certification required or must be obtained within 30 days of hire.
- Master's degree preferred, or Bachelor's degree with field experience.
We're looking forward to meeting you, and we truly mean that. Join our family, and let's make a positive impact together!
LPN/LVN Career Opportunity
Walk-In Wednesday On-Site Interviews from 9am-3pm
Embark on Your Compassionate LPN/LVN Journey at Encompass Health
Are you in search of a fulfilling healthcare career close to your heart and home? Encompass Health welcomes you warmly, offering a space that feels like home from day one, where you're valued and embraced as if we've been long-time friends. Join us in making a positive impact on the community, delivering care and support to patients while contributing to their inspiring outcomes. If this resonates with you, you're in the right place. As an LPN/LVN, your understanding of the significance of small victories drives you. Utilize your specialized skill set to deliver top-tier, compassionate, and personalized care, dedicating time to deeply comprehend patients and support their rehabilitation goals. Within an environment where our team embodies drive, support, warmth, and inspiration, access cutting-edge equipment and technology. Our commitment starts on day one, prioritizing your growth, development, and well-being through our tuition reimbursement program and personalized career path plans. Welcome to a career where your compassion fuels impactful care and personal fulfillment.
A Glimpse into Our World
Whether you're establishing the foundations of your career or a seasoned LPN/LVN in search of a nurturing work environment to call home, we're confident you'll sense the difference the moment you become part of our team. Being at Encompass Health means being associated with a growing national inpatient rehabilitation leader. We take pride in our career growth opportunities and the collaborative spirit of our team members, all united for the greater good of our patients. Our achievements, including being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, make us immensely proud.
Benefits That Begin With You
Our benefits are designed to support your well-being and start on day one:
- Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.
- Generous paid time off that accrues over time.
- Tuition reimbursement and continuous education opportunities for your professional growth.
- Company-matching 401(k) and employee stock purchase plans, securing your financial future.
- Flexible spending and health savings accounts tailored to your unique needs.
- A vibrant community of individuals who are passionate about what they do!
Be the LPN/LVN You've Always Aspired to Be
Your impactful journey involves:
- Providing direct patient care, aligning with the personalized care plan and physician orders.
- Observing patient behaviors, including monitoring vital signs, symptoms, and responses to treatments.
- Collaborating directly with Registered Nurses to report findings and execute patient care plans.
- Cultivating meaningful relationships with patients by dedicating time to understand their physical, mental, and emotional needs for a successful recovery.
- Celebrating patient victories along the way.
Qualifications
- Current LPN/LVN licensure as required by state regulations.
- CPR certification.
- One year of experience in an inpatient medical-surgical or general hospital setting is preferred.
- Rehabilitation experience is preferred.
We're eager to meet you, and we genuinely mean that. Join us on this remarkable journey!
The Encompass Health Way We proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing! At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
