Engineering Structures Impact Factor Jobs in Mapleton Utah Online
764 positions found
Citizen, U.Person, or Immigration Status Requirements:S.
government issued security clearance is required prior to start date.
S.
citizens are eligible for a security clearance Security Clearance Type:Secret Security Clearance Status:Ability to obtain INTERIM U.S.
government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.
We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat.
The Mechanical Engineering group in the Shipboard Effectors Department is currently searching for an experienced Mechanical Design Engineer to work on a multi-discipline team to support design and upgrades of Shipboard Effectors products and subsystems.Utilizing strong mechanical hardware design experience and knowledge with ruggedized structures, interconnects, cooling, and electronics integrationDeveloping technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of electronics for multiple military programsSupervising the definitions of mechanical outline and construction details, component selection and specification, mechanical and assembly drawings, electrical/RF layout, and delivering the final technical data packageTracking, reporting, and meeting cost, schedule, quality, and performance requirements for the finished product, including Earned Value (EV) management and Estimate at Complete (EAC) inputsProviding technical conscience, challenged with making sure the product and process meet appropriate standards and requirements while helping to remove roadblocksWorking with minimal direction or supervision, while exercising considerable latitude in determining the technical objectives of the assignment while meeting cost, schedule, quality, and performance requirements for the finished product.Leading a small team of mechanical engineers when requiredInteracting frequently with senior personnel, occasionally including external customers, on significant technical matters often requiring coordination between organizations.Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience or An Advanced Degree in a related field and minimum 5 years experience.A minimum of eight (8) years of experience in the design of electronics packaging for military or aerospace or commercial applicationsThe ability to obtain and maintain a US security clearance prior to the start date.
S.
citizens are eligible for a security clearanceExperience with ANSI drawing standards and/or first order or structural analysis techniques.Strong leadership skills and project management, sub contract management experienceExperience with CREO (Pro/E) or similar 3D solid modeling softwareCognizant of machine suppliers' capabilities or have direct experience in a manufacturing and assembly support role for producibilityFamiliarity with the design and manufacturing processes of CCAs, mechanical/RF components, metal housings, structures, and electronics assembliesMust have a working knowledge of Microsoft Office (Word, Excel, PowerPoint)Very strong verbal and written communications and interpersonal skills when working with team members and customersAdvanced degree in Mechanical, Electrical or Aerospace EngineeringOur values drive our actions, behaviors, and performance with a vision for a safer, more connected world.
This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays.
Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement.
Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
S.
territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted.
However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class.
RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.Privacy Policy and Terms:Click on this link to read the Policy and Terms
Job description:
Plant Manager | Polymer Extrusion Facility
We are seeking a technically savvy Plant Manager to lead our polymer extrusion operations. If you’re the kind of leader who knows that a plant runs on both high-performance machinery and high-performing people, we want to talk to you.
As the Plant Manager, you won't just be overseeing a floor; you’ll be the architect of our production efficiency, the guardian of our safety culture, and the driver of continuous improvement.
The Role: What You’ll Do
- Drive Production Excellence: Manage the daily operations of multiple extrusion lines to meet (and exceed) production targets while maintaining strict quality standards.
- Optimize Technical Processes: Oversee material blending, die setups, and cooling parameters. You should be comfortable "talking shop" regarding polymer rheology and mechanical troubleshooting.
- Lead & Mentor: Foster a culture of accountability and professional growth across production supervisors, maintenance tech, and operators.
- Budget & P&L Ownership: Manage the plant’s bottom line, including labor costs, raw material waste (scrap reduction), and CAPEX projects.
- Safety First: Ensure 100% compliance with OSHA standards and internal safety protocols. No product is worth a person’s well-being.
- Continuous Improvement: Implement Lean Manufacturing or Six Sigma methodologies to reduce downtime and optimize changeover speeds.
What You Bring to the Table
- Experience: 7+ years in a manufacturing leadership role, specifically within polymer extrusion (profile, sheet, film, or tubing).
- Technical Knowledge: A deep understanding of single/twin-screw extruders, downstream equipment, and resin behavior (PE, PP, PVC, etc.).
- Problem-Solving Skills: You don't just see a bottleneck; you find the root cause and fix it permanently.
- Education: Bachelor’s degree in Engineering (Mechanical, Chemical, or Plastics) or a related technical field is preferred.
- Communication: The ability to explain complex technical issues to stakeholders and motivate a diverse workforce on the floor.
Assistant Project Manager
Location: Springville, UT
Why Join Us?
Join a respected mechanical contracting team known for delivering high-quality HVAC and plumbing systems across commercial and industrial projects. With a strong reputation built on craftsmanship, collaboration, and accountability, this Springville-based team offers hands-on project exposure and clear pathways for career growth.
Role Overview
The Assistant Project Manager (APM) supports the successful planning and execution of mechanical construction projects. This role partners closely with Project Managers, field teams, and vendors to help keep projects on schedule, within budget, and aligned with client expectations.
Key Responsibilities
- Assist Project Managers with day-to-day coordination of mechanical construction projects
- Support budgeting, forecasting, and job cost tracking
- Coordinate submittals, RFIs, and project documentation
- Communicate with subcontractors, suppliers, and field teams to ensure timely execution
- Track material procurement and delivery schedules
- Help maintain project schedules and milestone updates
- Participate in project meetings and provide status updates
Qualifications & Experience
- 2+ years of experience in construction project coordination or management (mechanical/HVAC preferred)
- Strong organizational and communication skills
- Ability to read and interpret construction drawings and specifications
- Proficiency in Microsoft Office; experience with construction management software is a plus
- Bachelor’s degree in Construction Management, Engineering, or related field preferred
What Success Looks Like
- Projects remain on schedule and within budget
- Accurate and timely processing of project documentation
- Strong collaboration between office and field teams
- High client satisfaction and minimal project delays
We are committed to building a diverse and inclusive workforce and are proud to be an Equal Opportunity Employer.
Apply today to grow your career with a team that builds with purpose and precision.
NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.
Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.
If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .
AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.
Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.
Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).
GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.
You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.
Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.
Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.
The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.
Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.
Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.
Locations are offered based on the current needs of the service at that time.
Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.
Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.
Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.
Collecting, refining, and analyzing strategic and tactical intelligence.
Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.
See the U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.
You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.
Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.
Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.
Highly skilled in writing comprehensive arrest, criminal and incident reports.
Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.
Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.
OR GS-11 Education Substitution for experience: A Ph.D.
or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.
OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.
This will be calculated using your resume and unofficial transcripts submitted with your application.
AND U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.
Your copies must include the expiration and capacity pages of your MMC.
Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.
It cannot be pending additional information for MMLD application process.
You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.
NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.
Please see the "Required Documents" section below for additional resume requirements.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d), or creditable service covered by Title 5 U.S.C.
8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.
This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.
Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.
3312.
You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training : This position has a training requirement.
You may be required to successfully complete the training requirement as a condition of employment.
Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.
You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.
Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.
If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .
AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.
Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.
Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).
GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.
You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.
Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.
Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.
The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.
Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.
Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.
Locations are offered based on the current needs of the service at that time.
Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.
Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.
Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.
Collecting, refining, and analyzing strategic and tactical intelligence.
Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.
See the U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.
You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.
Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.
Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.
Highly skilled in writing comprehensive arrest, criminal and incident reports.
Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.
Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.
OR GS-11 Education Substitution for experience: A Ph.D.
or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.
OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.
This will be calculated using your resume and unofficial transcripts submitted with your application.
AND U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.
Your copies must include the expiration and capacity pages of your MMC.
Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.
It cannot be pending additional information for MMLD application process.
You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.
NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.
Please see the "Required Documents" section below for additional resume requirements.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d), or creditable service covered by Title 5 U.S.C.
8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.
This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.
Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.
3312.
You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training : This position has a training requirement.
You may be required to successfully complete the training requirement as a condition of employment.
Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.
You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.