Engineering Structures Impact Factor Jobs in Mapleton Utah Online
764 positions found — Page 2
NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.
Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.
If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .
AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.
Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.
Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).
GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.
You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.
Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.
Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.
The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.
Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.
Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.
Locations are offered based on the current needs of the service at that time.
Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.
Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.
Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.
Collecting, refining, and analyzing strategic and tactical intelligence.
Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.
See the U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.
You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.
Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.
Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.
Highly skilled in writing comprehensive arrest, criminal and incident reports.
Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.
Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.
OR GS-11 Education Substitution for experience: A Ph.D.
or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.
OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.
This will be calculated using your resume and unofficial transcripts submitted with your application.
AND U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.
Your copies must include the expiration and capacity pages of your MMC.
Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.
It cannot be pending additional information for MMLD application process.
You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.
NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.
Please see the "Required Documents" section below for additional resume requirements.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d), or creditable service covered by Title 5 U.S.C.
8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.
This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.
Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.
3312.
You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training : This position has a training requirement.
You may be required to successfully complete the training requirement as a condition of employment.
Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.
You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.
Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.
Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.
The basic requirements of a woman to serve as a surrogate are:
- Emotionally stable
- Responsible
- In good physical health
- Non-smoker
- Has had at least one successful pregnancy
- Is capable of carrying a child to full term
A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.
In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.
Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.
Team Up Athletics is looking for competitive, entrepreneurial sales professionals who want to build their own business within the sports industry.
This is not a typical sales job.
Our Field Sales Pros operate like territory owners, developing relationships with high schools, youth sports leagues, and club programs to provide uniforms, apparel, and equipment.
If you thrive on competition, relationships, and unlimited income potential, this role offers a clear path to a six-figure income and long-term territory ownership.
You will build and manage a defined geographic territory by developing relationships with:
- High school athletic programs
- Youth sports organizations
- Club and travel teams
- Booster clubs and parent organizations
Responsibilities include:
• Meeting with coaches and athletic directors
• Designing uniform and apparel programs
• Managing spirit pack and fan gear stores
• Providing equipment solutions to athletic programs
• Building long-term partnerships with schools and organizations
The goal is simple:
Become the trusted apparel partner for the entire athletic department.
Every territory includes:
- High schools
- feeder youth leagues
- club sports programs
A typical territory contains $2M–$3M+ in annual sports apparel spending.
Our most successful reps build relationships across their territory and capture $800K–$1.5M in annual sales.
Typical income progression:
Year 1 Expected Income $50K–$75K
Year 2 Expected Income $80K–$120K
Year 3 Expected Income $120K–$180K+
There is no cap on earnings.
Unlike traditional sales jobs, this position offers the opportunity to:
• Build a long-term book of business
• Develop recurring annual revenue from schools and programs
• Grow a territory that compounds year after year
• Create relationships in your local sports community
Many of our top reps were:
- former athletes
- coaches
- teachers
- youth sports volunteers
If you already have relationships in the sports world, you start with a major advantage.
We’re looking for someone who is:
• Competitive and self-motivated
• Comfortable building relationships in person
• Organized and proactive with follow-up
• Passionate about sports and community
• Entrepreneurial in mindset
You should enjoy being out in the community, meeting coaches, attending games, and building relationships.
This role rewards initiative, creativity, and persistence.
• Commission-based income with high earning potential
• Ongoing revenue from repeat customers
• Opportunity to build a long-term territory
Top performers can build six-figure incomes by developing strong relationships with schools, youth leagues, and club programs.
Team Up Athletics partners with athletic programs to provide:
- custom uniforms
- team apparel
- spirit packs
- fan gear stores
- athletic equipment
We focus on building long-term relationships with athletic departments rather than simply selling products.
Our mission is to help teams look great, perform confidently, and represent their programs with pride.
This opportunity is ideal for someone who wants to:
- control their income
- build meaningful relationships in their community
- work in the sports industry
- grow something that compounds over time
If you’re competitive, driven, and excited about building a territory in the sports world, we’d love to talk.
This role is likely not a fit if you:
• Prefer a predictable salary over performance-based income
• Are uncomfortable initiating conversations with new people
• Prefer working behind a desk rather than in the community
• Are not interested in building long-term relationships with coaches and athletic programs
Our most successful reps are competitive, self-driven, and excited about building something of their own.
If you believe you’d thrive in this role, include a short note in your application answering this question:
“What is one relationship in the local sports community you would start with if you joined Team Up Athletics, and why?”
This position rewards initiative and relationship building.
Sales professionals who actively build their territory typically reach $80K–$120K income within two years, with top performers exceeding that.
Those who prefer a traditional employee role may find this position less appealing.
A MISSION WORTHY OF A CAREER!
If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.
USBP is hiring immediately to fill full-time,entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.
Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below).
Salary and Benefits
Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duty Locations
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. RELOCATION MAY BE REQUIRED.
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:
- Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa
- Buffalo Sector Stations - Wellesley Island
- Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde
- El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta
- El Centro Sector Stations - El Centro, Indio, Calexico
- Grand Forks Sector Stations - Pembina
- Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass
- Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren
- Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata
- Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen
- San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente
- Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville
- Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford
- Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox
- Yuma Sector Stations - Blythe, Yuma, Wellton
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
- Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience: One year of specialized work experience that shows you have the skills necessary to:
- Make sound judgments and decisions in the use of firearms.
- Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
- Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military)
Border Patrol Agent (BPA) - Experienced (GL-9 GS-11)
SAME MISSION, NEW DRIVE!
You love protecting your community and doing your part to keep our nation safe. But maybe you're looking for a change of scenery?
USBP is hiring immediately for full-time, career positions, where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities. Continue making a difference with the nation's premier federal agency charged with securing our borders and protecting our country.
Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission.
Check out the duties and responsibilities section below, along with the qualifications section to see if you are eligible. Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below).
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.
U.S. Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits:
Salary for newly appointed law enforcement Border Patrol Agents varies from:
Base Salary: GL-9/GS-11, $63,148 - $120,145 per year
Locality Pay: Varies by duty location.
Overtime Pay: Up to 25%
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression from GL-9 to GS-11 to GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in the lower grade level.
All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:
- Big Bend Sector Stations – *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa
- Buffalo Sector Stations – Wellesley Island
- Del Rio Sector Stations – Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde
- El Paso Sector Stations – Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta
- El Centro Sector Stations – El Centro, Indio, Calexico
- Grand Forks Sector Stations – Pembina
- Havre Sector Stations – Havre, Malta, Plentywood, Scobey, Sweetgrass
- Houlton Sector Stations – Calais, Fort Fairfield, Jackman, Rangeley, Van Buren
- Laredo Sector Stations – Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata
- Rio Grande Valley Sector Stations – Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen
- San Diego Sector Stations – Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente
- Spokane Sector Stations – Colville, Curlew, Metaline Falls, Oroville
- Swanton Sector Stations – Beecher Falls, Burke, Champlain, Newport, Richford
- Tucson Sector Stations – *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox
- Yuma Sector Stations – Blythe, Yuma, Wellton
Duties and Responsibilities:
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations.
- Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations.
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband.
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks.
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications:
GL-9:You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as:
- Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence.
- Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws.
- Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., warrants, subpoenas, etc.), and gathering evidence for criminal cases prosecuted through the court system.
If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-11 grade level.
GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as:
- Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official.
- Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official.
- Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities.
Other Requirements:
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (including protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference: You may also be eligible for an excepted service Veterans' Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
NOTE: As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
~ Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
~8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
~ Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
~ Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
~ Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
~ Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
*At Securian Financial the internal position title is Infrastructure Dir."
Mission
"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."
Positioning
The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.
This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.
Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.
Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.
Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.
Scope of Accountability
Resilience Engineering & Cloud Reliability
Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.
Own resilience automation, chaos testing, and IaC-based recovery validation.
Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.
Quality Engineering & Continuous Testing
Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.
Drive automation-first testing (functional, non-functional, performance, resilience).
Embed observability-driven quality validation and contract testing across services.
Performance, Capacity & Efficiency Engineering
Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).
Partner with Platform & Infrastructure teams to tune performance across application and platform layers.
Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.
Cross-Domain Architecture Collaboration
Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.
Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.
Engage Data Architects for data resilience, replication, and pipeline reliability.
Work with Business Architects to align technical reliability goals with critical business outcomes.
Leadership & Talent Development
Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.
Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.
Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.
Core Technical Competencies
AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.
Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.
Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.
Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.
Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.
Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.
Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.
FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.
Leadership Competencies
Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.
Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.
Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.
Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.
Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.
Qualifications & Experience
12+ years in cloud engineering, reliability, or platform leadership roles.
5+ years leading Sr. Managers/Managers in technical domains.
Proven expertise across AWS, with working knowledge of Azure and GCP.
Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.
Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.
Certifications:
Required: AWS Certified Solutions Architect - Professional
Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect
Success Metrics
99.9% availability maintained for Tier-1 workloads.
100% coverage of DR automation for Tier-1 services.
25% annual increase in automated quality/test coverage.
15% annual improvement in resource efficiency and cost performance.
Documented resilience participation across all enterprise architecture blueprints.
Positive "technical peer readiness" and succession rating from Head of REO.
Summary Value Proposition
This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.
It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$145,000.00 - $267,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Position Summary:
Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.
As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.
You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.
Responsibilities include but not limited to:
Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms
Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions
Qualifications:
Hands-on experience engineering and supporting cloud-based telephony or contact center platforms
Strong understanding of VoIP technologies, SIP, and call routing concepts
RingCentral and RingCentral Contact Center engineering
NiCE inContact / CXone administration and development
Cyara or similar modern telephony orchestration platforms
Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments
Solid knowledge of networking concepts related to real-time communications
Preferred Qualifications:
Supporting remote contact center agents
REST API integrations and automation
Scripting using PowerShell or Python
Workforce management, call recording, or speech technologies
PSTN carrier and phone number lifecycle management
This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.
#LI-Hybrid**This position willhave a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.