Engineering Structures Impact Factor Jobs in Enid Ok Remote

859 positions found — Page 4

Border Patrol Agent - Earn up to $30,000 in Recruitment Incentives
Salary not disclosed
Enid, Oklahoma 3 days ago

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

  • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
  • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
  • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
  • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
  • Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

  • Make sound judgments and decisions in the use of firearms.
  • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
  • Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Not Specified
U.S. Border Patrol Agent
🏢 U.S. Customs and Border Protection
Salary not disclosed
Waukomis, Oklahoma 3 days ago

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

  • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
  • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
  • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
  • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
  • Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

  • Make sound judgments and decisions in the use of firearms.
  • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
  • Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Not Specified
United States Border Patrol Agent
🏢 U.S. Customs and Border Protection
Salary not disclosed
Enid, Oklahoma 3 days ago

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

  • Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
  • Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
  • Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
  • Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
  • Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

  • Make sound judgments and decisions in the use of firearms.
  • Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
  • Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Not Specified
Nuclear Engineer
Salary not disclosed
Enid, Oklahoma 1 week ago

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
Aviation Electrician's Mate
🏢 U.S. Navy
Salary not disclosed
Waukomis, Oklahoma 1 week ago

Job Title : Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category / Component : Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics, and computer based systems that enable radar, communications, navigation, flight controls, and weapons at sea and ashore.

Qualified Sailors may also volunteer as Naval Aircrewmen and perform in flight systems operations and mission support.

Key Responsibilities Troubleshoot and repair complex aircraft systems including digital computers, fiber optics, radar, laser electronics, infrared detection, and communications and navigation suites; maintain aircraft electrical power generation and distribution systems; test and calibrate aircraft instruments and automatic flight controls; perform micro miniature circuit card repair for qualified technicians; install modifications and upgrades to aircraft avionics and electrical systems; use diagnostic equipment and interpret schematics and wiring diagrams to restore systems to full mission capability.

What to Expect A mix of hands on flight line maintenance and bench diagnostics in hangars, avionics shops, and aboard aircraft carriers; frequent troubleshooting under time pressure to return aircraft to service; work around high tempo flight operations with rotating shifts, nights, and weekends while deployed; strict adherence to safety, tool control, foreign object damage prevention, tag out procedures, and quality assurance standards; opportunities to qualify as a work center leader or collateral duty inspector as you gain experience.

Work Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations.

Pathways, Training & Advancement Recruit Training followed by Class A School in Pensacola, Florida, covering aviation theory, electrical systems, electronics fundamentals, and technical skills; assignment after A School into either the Aviation Electrician's Mate or Aviation Electronics Technician rating based on performance and Navy needs; advanced platform specific schools for particular aircraft and mission systems; opportunities to qualify for micro miniature repair and, for volunteers who qualify, to attend Naval Aircrew training.

Enlist for the Aviation Electronics and Electrical pipeline, with final placement into AE or AT after A School based on performance and service needs; qualified Sailors may later volunteer for Naval Aircrew duty after initial rating qualification and screening.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Not Specified
SAP Engineer - Licensing and Compensation (Hybrid)
Salary not disclosed

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

  • Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

  • Perform analysis, design, development, and integration on medium to high level complexity assignments.

  • Develop and support automation capabilities through webservices and APIs.

  • Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

  • Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

  • Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

  • Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

  • Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

  • Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

  • 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

  • Familiarity with SAP ICM/APM and ALM modules.

  • Strong problem-solving skills and ability to manage multiple priorities.

  • Excellent communication skills and ability to work cross-functionally.

  • Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

  • SAP Certification in relevant Modules

  • Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

  • Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

  • Ability to work independently and as part of a collaborative team.

  • Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

$72,000.00 - $134,000.00

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

  • We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

  • Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

  • Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

  • Mental Wellness and Disability

  • Pride at Securian Financial

  • Securian Young Professionals Network

  • Securian Multicultural Network

  • Securian Women and Allies Network

  • Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here


Remote working/work at home options are available for this role.
Not Specified
Principal Thermal Rack Engineer (Rack Integration Solutions) - Hybrid Work Flexibility (AUSTIN)
Salary not disclosed
**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed

Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

  • Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
  • Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
  • Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
  • Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
  • Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
  • Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
  • Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
  • Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
  • Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
  • Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
  • Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
  • Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
  • Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
  • Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
  • Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education:

  • Bachelor's degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience:

  • 8 years' experience in mechanical design and integration of mission-critical systems.
  • Proven track record of successful system designs and implementations in a relevant industry
  • Strong understanding of mechanical systems, integration strategy, and system coordination
  • Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
  • Excellent problem-solving skills and attention to detail
  • Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

  • Master's Degree in Mechanical Engineering
  • Professional Engineer (PE) License

Remote working/work at home options are available for this role.
permanent
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Work from anywhere with rare travel demands (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
jobs by JobLookup
✓ All jobs loaded